- Type of paper
: Paper in journal
Title: Nuclear energy and public
- Authors:
- Novosel, Nevenka (132021)
Journal: Energetika, gospodarstvo, ekologija, etika - EGE
Number: 4
ISSN: 1330-0628
Year: 1993
Pages: from 30 to 30
Number of references: 1
Language: hrvatski
Summary: This paper contains the guiding principles to be followed
up in communication with the public that can be clasiffied to group shaving
similar opinion of nuclear energy. Special attention is given to the
situation in the Republic of Croatia, what measure shave been taken in this
matter in the Ministry of Economy in particular. And finally, a conclusion
has been given that the nuclear energy should be treated as one of the
posible choices for future but only on condition that the public is kept
fully informed of all aspects - risk and benefits of nuclear energy.
Keywords: Nuclear energy, Public
- Type of paper
: Paper in journal
Title:
- Authors:
- Novosel, Nevenka (132021)
Journal: Energetika, gospodarstvo, ekologija, etika - EGE
Number: 6
ISSN: 1330-0628
Year: 1994
Pages: from 25 to 25
Language: hrvatski
Keywords: Nuclear power station,
- Type of paper
: Paper in journal
Title:
- Authors:
- Šaban, Ivka (45814)
- Flegar, Ljerka (95362)
- Špalj, Srđan (162996)
Journal: Electrical Engineering Apstracts
Number: 5
Year: 1994
Pages: from 3191 to 3191
Number of references: 3
Language: engleski
Summary: A valve electrical motor in nuclear power plant has to
satisfy the rigid requirements of the nuclear 1E class and to work under
the all conditions-normal and accidental. Qualification testing of motor
prototype is preceed by analogue testing of similar scope of
models(motorettes) in order to assess the insulation system quality and its
andurance with respect to temperature, humidity, radiation and vibration.
The results of the insulation system testing of motorettes and their
evaluation in the scope of the 1E development,as a replacement part in
nuclear power plants are presented. Ageing is also observed in that point
of view.(3ref.)
Keywords: Motorettes, Ageing,
- Type of paper
: Paper in journal
Title: Dismantling of Nuclear installations
- Authors:
- Novosel, Nevenka (132021)
Journal: Energetika, gospodarstvo, ekologija, etika - EGE
Number: 6
ISSN: 1330-0628
Year: 1994
Pages: from 25 to 27
Language: hrvatski
Summary: Dismantling means removal of all radioactive components and
materials such as a reactor and piping. Those structures are decontamoned
or kept in custodial safe storage. Storage buildings and areas are cleaned.
Internationally approved procedures (strages) of NPP dismantling are:
custodial safe storage - deferred dismantling, burial and momentary
dismantling.
Keywords: Dismantling,
- Type of paper
: Paper in proceedings
Title: Nuclear energy and technology
- Authors:
- Šaban, Ivka (45814)
- Flegar, Ljerka (95362)
- Novosel, Nevenka (132021)
- Poljičanin, Ivan (129356)
- Smiljanić, Danijel (32792)
- Zaharija, Dubravka (149686)
Proceedings title: Zbornik radova:III Simpozij o novim tehnologijama
Language: hrvatski
Place: Zagreb
Year: 1991
Pages: from 9 to 9
Meeting: ENS: Nuclear energy in central Europe Annual Meeting of Nuclear Society of Slovenia
Held: from 11/10/91 to 11/13/91
Summary: In the paper are presented the scope of the works in the
Project Nuclear energy and technology and the goals of the developments.
The main goal is to get the equipment higher technology quality tnan they
are now. The class 1E valve electrical motor is a such equipment. The
development of the cryogenc equipment allow us to follow its development
through analysis and so be ready when the conditions would exist they can
produce.
Keywords: The Project development,
- Type of paper
: Paper in proceedings
Title: The developments of the safety related valve electrical
motors.
- Authors:
- Šaban, Ivka (45814)
- Novosel, Nevenka (132021)
- Flegar, Ljerka (95362)
- Zaharija, Dubravka (149686)
- Poljičanin, Ivan (129356)
Proceedings title: Zbornik radova:III Simpozij o novim tehnologijama
Language: hrvatski
Place: Zagreb
Year: 1991
Pages: from 158 to 160
Meeting: ENS: Nuclear energy in central Europe Annual Meeting of Nuclear Society of Slovenia
Held: from 11/10/91 to 11/13/91
Summary: The article describes the development of the class 1E valve
motor. The class 1E valve motor development includes activities such as
project development and production of the class 1E valve motor and quality
assurance development for the class 1E motor.
Keywords: Valve motor Safety related valve motor Motor development
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Šaban, Ivka (45814)
- Novosel, Nevenka (132021)
- Flegar, Ljerka (95362)
- Poljičanin, Ivan (129356)
- Editors
- Benčić, Zvonko
- Perić, Nedjeljko
Proceedings title: Proceedings 37 Part 1
Language: engleski
Place: Zagreb
Year: 1992
ISBN/ISSN: 86-81571-11-7
Pages: from 522 to 524
Meeting: 37 th International annual garhering KoREMA
Held: from 04/26/92 to 04/29/92
Summary: Safety related valve electrical motors are intended for use
in nuclear power plants to perform safety function. Electric motoras safety
related equipment must fulfill requirements determined for class 1E
equipment. Qualification requirements proceed from IEEE Code. According to
the IEEE Code are made qualification planand program for motor testing.
Qualification test differs from standard test. Qualification test specifies
a predetermined sequence of ageing, radiation, seismic and simulated
accident(or LOCA) testing. All the time valve motor must maintain its
function and predictive performance. Test facilities for the valve motor
qualification are asigned.
Keywords: Qualification program,Qualification plan,Qualification method, Equipment qualification,Motor qualification
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Zaharija, Dubravka (149686)
- Šaban, Josip
- Šaban, Ivka (45814)
- Novosel, Nevenka (132021)
- Flegar, Ljerka (95362)
- Editors
- Perić, Nedjeljko
Proceedings title: Proceeding 37 Part 1:37th International annual gathering KoREMA
Language: engleski
Place: Zagreb
Year: 1992
Pages: from 525 to 528
Meeting: 37 th International annual garhering KoREMA
Held: from 04/26/92 to 04/29/92
Summary: Safety related valve electrical motor is intended to be
used inNPP Krško and in the other nuclear power plant. Safety relatedmotor
means a motor designed and produced in electrical class 1Eaccording to the
IEEE standards. To design and to produce the 1Evalve electrical motor, all
requirements to the certain codes andstandards and technical specification
for safety related motorought to be fulfilled. To obtain motor similar to
the motorinstalled in NPP Krško some tests are made on a motor sample ofNPP
Krško. Related know how and experience exists for standardmotor and it is
applied to the development of safety relatedmotor. Solution is given in the
present paper.
A valve electrical motor to qualified for electrical class 1Emust be
produced in accordance with quality assurance (QA)requirements defined and
approved. The paper presents how QA issolved.
Keywords: Motor development,
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Smiljanić, Danijel (32792)
- Premec, M
Proceedings title: Proceeding 37 Part 1:37th International annual gathering KoREMA
Language: engleski
Place: Zagreb
Year: 1992
Pages: from 295 to 298
Meeting: 37 th International annual garhering KoREMA
Held: from 04/26/92 to 04/29/92
Summary: Due both to the present development of the low temperature
technology and to planned future applications of cryoelectrotechnics,
specially in particle phisics research, it has become necessary to get an
improved knowledge of the various properties of the cryogenic conducting,
electrical insulating aswell as structural materials, both metalic and non
metalic which could be used to fulfill electrical and mechanical functions
inlow temperature systems.
In the paper is given a short review of present knowledge concerning the
main conducting, insulating and structural materals up to be used in
construction of superconducting machines, specially magnets for particle
research.The aim of thepaper is to stimulate all those specialists that can
help to promote the measurements by developing measuring methods and
devices for characterisation of relevant materials at cryotemperatures.
Keywords: Cryogenic temperature, Cryogencs, Superconducting machines, Supercondructing magnets,
- Type of paper
: Paper in proceedings
Title: Quality assurance in the scope of the electroenergetic
solution of Republic Croatia
- Authors:
- Šaban, Ivka (45814)
- Novosel, Nevenka (132021)
- Flegar, Ljerka (95362)
Proceedings title: Zbornik radova: Stručna konzultacija:Obnova i izgradnja elektroenergetskog siste
Language: engleski
Place: Zagreb
Year: 1992
Pages: from 1 to 5
Meeting: Obnova i izradnja elektroenergetskog sistema, Hrvatski komitet međunarodne konferencije za velike električne sisteme CIGRE
Held: from 05/18/92 to 05/19/92
Summary: The very bad electroenergetic situation in Republic Croatia
is partly caused by the war and partly by the worn out of the equipments
and it has to be quickly in solving this situation. Qaulity assurance must
be suite to garanty that the money are well invested. In the paer are
presemted the role of the QA as well as the role of the partisiants in the
QA.
Keywords: Quality assurance,
- Type of paper
: Paper in proceedings
Title: Valve electrical motors in nuclear power plant - problem
and solution
- Authors:
- Šaban, Ivka (45814)
- Šaban, Josip
- Flegar, Ljerka (95362)
Proceedings title: Zbornik radova-Proceedings:VI Međunarodno savjetovanje o elektromotornim pogonim
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 248 to 251
Meeting: VI Međunarodno savjtovanje o elektromotornim pogonima
Held: from 10/13/92 to 10/15/92
Summary: In the article are presented all requirements and
characteristics of the valve electrical motor respecting differant type of
the valves. The motor has to satisfy special requirements defined by 1E
electrical class for nuclear electrical equipment. According to presented
requirements, solution for typical case of using in NPP Krško is given.
Keywords: Valve electrical motor, Motor design, Motor construction, Motor technology,
- Type of paper
: Paper in proceedings
Title: QA requirements analysis for 1E production
- Authors:
- Novosel, Nevenka (132021)
- Šaban, Ivka (45814)
- Flegar, Ljerka (95362)
Proceedings title: VI Međunarodno savjetovanje o elektromotornim pogonima
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 244 to 247
Meeting: VI Međunarodno savjtovanje o elektromotornim pogonima
Held: from 10/13/92 to 10/15/92
Summary: An electrical motor qualified for class 1E must be produced
in accordance with quality assurance (QA) requirements defined and
approved. QA program for 1E must be realized in keeping with international
code IAEA 50-C-QA Rev. 1 or american standard ANSI45.2. Better results are
expected in the QA development for 1E motor if ISO 9000 Std. would be
implemented in producers organisation.
The paper presents QA requirements for 1E motor production.
Keywords: Quality assurance QA
- Type of paper
: Paper in proceedings
Title: Properties of conducting, insulating and structural
materials at cryogenic temperatures
- Authors:
- Smiljanić, Danijel (32792)
- Premec, M
- Editors
- Perić, Nedjeljko
Proceedings title: Zbornik radova-Proceedings:VI Međunarodno savjetovanje o elektromotornim pogonim
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 33 to 36
Meeting: VI Međunarodno savjtovanje o elektromotornim pogonima
Held: from 10/13/92 to 10/15/92
Summary: Present development of the low temperature technology and
theplaned future applications of cryoelectrotechnics, specially inparticle
phisics research, impose the necessity of getting animproved knowledge of
the various properties of conducting,insulating and structural materials.
In the paper is given shortreview of present knowledge concerning the main
conducting,insulating and structural material which could be used to
fulfill electrical and mechanical functions in superconductingsystems.
Keywords: Superconducting machine,
- Type of paper
: Paper in proceedings
Title: Electromagnetic system of the cryogenic
accelerator/collider LHC in CERN
- Authors:
- Smiljanić, Danijel (32792)
Proceedings title: Zbornik znansveno stručnih priopćenja
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from 55 to 62
Meeting: 2. Simpozijum hrvatskog nuklearnog društva
Held: from 11/22/93 to 11/23/93
Summary: CERN is preparing for the construction of a new high energy
accelerator/collider, the LHC (Large Hadron Collider). The construction
would be completed by the end of the sentury. The magnet system comprises
nearly 5000 different types of magnets,from 10T,10m long superconducting
dipol bending magnets to relatively small correctors of low induction. For
about 80 superferric dipoles exist a real possibility to be constructed in
Končar factories. Preparations for development and construction of the
model already started.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Šaban, Ivka (45814)
- Flegar, Ljerka (95362)
- Špalj, Srđan (162996)
- Grgić, Davor (114324)
Proceedings title: Proceedings ENS : Nuclear energy in Europe
Language: engleski
Place: Ljubljana, Slovenija
Year: 1993
Pages: from 260 to 267
Meeting: ENS: Nuclear energy in central Europe Annual Meeting of Nuclear Society of Slovenia
Held: from 06/13/93 to 06/16/93
Summary: Valve electrical motor in nuclear power plant has to
satisfy rigid requirements of nuclear 1E class and to work in all
conditions - normal and accidental. Qualufication testing ofmotor prototype
is preceeded by analog testing of similar scopeon models (motorettes) in
order to assess insulation systemquality and endurance to temperature,
humidity, radiation and vibration.
The results of insulation system testing on motorettes and theirevaluation
in the scope of the 1E motor development, as areplacement part in nuclear
power plant are presented in thepaper. Aging is observed in that point of
view.
Keywords: motor qualification,
- Type of paper
: Paper in proceedings
Title: The development of the class 1E valve electrical motor -
the impulse in the equipment participation of the equipment producers in
NPP
- Authors:
- Šaban, Ivka (45814)
- Grgić, Davor (114324)
- Špalj, Srđan (162996)
- Novosel, Nevenka (132021)
- Flegar, Ljerka (95362)
Proceedings title: Zbornik znansveno stručnih priopćenja
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from 99 to 105
Meeting: 2. Simpozijum hrvatskog nuklearnog društva
Held: from 11/22/93 to 11/23/93
Summary: Republic Croatia is now in position to search and to find
new energy sources in order to solve needs for energy taking into account
nuclear energy as an energy source in despite of public opinion to it. For
that purpose positive role is safety related equipment development and
producer qualification for the equipment production. An example of such
development is the development of the 1E valve electrical motor. The motor
development includes nuclear knowledge, technological knowledge,
production posibility and testing posibility.
The article describes previous results of the 1E motor and its further
trend.
Keywords: Motorettes, Insulation system Motor testing
- Type of paper
: Paper in proceedings
Title: Qualificatin testing of the 1E motor insulation system
- Authors:
- Flegar, Ljerka (95362)
- Šaban, Josip
- Šaban, Ivka (45814)
Proceedings title: Zbornik radova:1. Savjetovanje HK CIGRE
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from 343 to 353
Meeting: Hrvatski komitet međunarodne konferencije za velike električke sisteme,CIGRE
Held: from 11/10/93 to 11/13/93
Summary: Motor insulation system qualification program was made. As
a basic curriculum for program compilation we used IEEE Std.323-1983, IEEE
Std. 117-1974, IEEE Std.275-1981, IEEE 429-1972.
According to the qualification program we made testings for motor
insulation system on motor models - motorettes.
In the paper we presented results of testings and their explanations.
Keywords: Qualification program, Qualificatin testing, Motor insulation system,
- Type of paper
: Paper in proceedings
Title: Results of the ageing of the 1E valve motor
- Authors:
- Šaban, Ivka (45814)
- Grgić, Davor (114324)
- Špalj, Srđan (162996)
- Novosel, Nevenka (132021)
- Flegar, Ljerka (95362)
Language: hrvatski
Pages: from 1 to 7
Meeting: 2. Simpozijum hrvatskog nuklearnog društva
Held: from 11/16/94 to 11/17/94
Keywords: uclear qualification, qalification testing, class 1E motor,
Other: Članak ima sedam stranica, prezentiran je ali materijali 2.
Simpozijuma nije još tiskan.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Šaban, Ivka (45814)
- Grgić, Davor (114324)
- Špalj, Srđan (162996)
Proceedings title: Proceedings ENS: Nuclear Energy in Central Europe
Language: engleski
Place: Ljubljana, Slovenija
Year: 1994
Pages: from 127 to 134
Meeting: Annual Meeting of Nuclear society of Slovenia
Held: from 09/10/94 to 09/11/94
Summary: 1E qualifiction testing of the valve electrical motor
inclues various aging models (thermal,radiation,vibrational
stress,operational stresor models,etc.) according to the requirements of
the IEEE Std. 323-74(1983). The scope of the qualification testing,
procedures used to relize the testing and results of the testing are
presented in the paper.
Keywords: Aging, Ageing,
- Type of paper
: Summary in proceedings
Title: Nuclear energetc and technology
- Authors:
- Šaban, Ivka (45814)
- Novosel, Nevenka (132021)
- Flegar, Ljerka (95362)
- Zaharija, Dubravka (149686)
- Poljičanin, Ivan (129356)
- Smiljanić, Danijel (32792)
Proceedings title: Zbornik radova III Simpozij o novim tehnologijama
Language: hrvatski
Place: Zagreb
Year: 1991
Pages: from 9 to 9
Meeting: III Simpozij o novim tehnologijama
Held: from 11/10/91 to 11/13/91
Summary: In the article is given the scope of the developments in
the Project Nuclear energy and technology as the goals of the developments.
The main goal is the equipment development - the technology with the
quality higher than is it today. Such equipment is a valve motor electrical
motor as the NPP Krško has. The development ofthe accelerators technics
impose following the super conducting equipmnent thrugh analysis which
allow us to be capable toinclude in production when the conditon for them
start.
Keywords: Project, Project development,
- Type of paper
: Summary in proceedings
Title:
- Authors:
- Šaban, Ivka (45814)
- Grgić, Davor (114324)
- Špalj, Srđan (162996)
Proceedings title: Book of Apstracts : Annual Meeting of Nuclear society of Slovenia
Language: engleski
Place: Ljubljana, Slovenija
Year: 1994
Pages: from 94 to 94
Meeting: Annual Meeting of Nuclear society of Slovenia
Held: from 09/10/94 to 09/11/94
Summary: 1E qualification testing of the valve electrical motor is
the ageing process on the motor according to the requirements and
qualification program of the IEEE 323-74(R1983).
The motor testing according to the 1E qualification program are made after
the motorettes ageing. The motorettes ageing was made for testing of the
motor insulation system. The selected system for stator insulation system
has been class H, insulation type RH. The developed motor has the same
insulation system as motorettes have.
The developed valve electrical motor passed baseline funcional testing,
operating cycling, radiation ageing and thermal ageing. The seismic testing
of the motor are on the way. The results of the 1E motor qualification
testing and evaluation of the given results on developed valve elevtrical
motor is presented paper.
The tested valve elevtrical motor is 1.2kW, 2800rpm.
Keywords: Motorettes,Insulation system,Testing,
- Type of paper
: Summary in proceedings
Title:
- Authors:
- Fancev, Tomislav
- Šaban, Ivka (45814)
- Grgić, Davor (114324)
Proceedings title: Book of Apstracts 2.nd Regional Meeting Nuclear Energy in Central Europe
Language: engleski
Place: Ljubljana, Slovenija
Year: 1995
Pages: from 95 to 96
Meeting: ENS: Nuclear energy in central Europe
Held: from 09/18/95 to 09/19/95
Summary: IEEE has developed Std. 344-1975 for seismic qualification
of class 1E equipment for nuclear power generating stations, as the
supplement of IEEE Std.323-1974. Both standards cover basic requirements
and procedures (recommended practices) for seismic qualification of Class
1E electric equipment. As one can see, seismic qualification of class 1E
equipment is appropriate combination of test and analysis method. It should
demonstrate that the structural integrity of the equipment is maintained
during the appropriate number of Operating Basis Earthquake (OBE).
Additionally, the equipment's ability to perform its required Class 1E
function must not failed during and after the time it is subjected to the
forces resulting from Safe Shutdown Earthquake (SSE). The analysis method
is recommended for those simple equipment that can be easily modeled to
correctly predict its response. If structural integrity alone can assure
the design-intended equipment funcion, analysis without testing may be
acceptable. Testing is proposed for complex equipment and assemblies that
can't be analyzed relatively simple, or can't be adequately analyzed at
all.
As a part of long-term project dealing with the 1E qualificatin of small
motors, finite elements method (FEM) application possibility has been
analyzed. NISA II FEM program package has been used as a support of
analysis.
Keywords: Resonant frequencies, Earthquake,
- Type of paper
: Summary in proceedings
Title:
- Authors:
- Šaban, Ivka (45814)
- Flegar, Ljerka (95362)
- Špalj, Srđan (162996)
Proceedings title: Book of apstracts : 1. Regional Meeting Nuclear Energy in Central Europe
Language: engleski
Place: Ljubljana, Slovenija
Year: 1993
Pages: from 406 to 406
Meeting: ENS: Nuclear energy in central Europe
Held: from 06/13/93 to 06/16/93
Summary: A nalve electrical motor in nuclear power plant has to
satisfy the rigid requirements of the 1E class and to work under all
conditions-normal and accidental. Qualification testing of a motor
prototype is preceded by analogue testing of a similar scope of models
(motorettes) in order to assess the insulation system quality and its
endurance with respect to temperature, humidity, radiation and vibration.
The results of the insulation system testing of motorettes and their
evaluation in the scope of the 1E motor development, as a replacement part
in nuclear power plants are presented. Ageing is also observed in that
point of view.
Keywords: Motorettes, Testing,
- Type of paper
: Prototype
Title: Rotor of the electrical equipment with permanent magnet
exciter
- Authors:
- Šaban, Ivka (45814)
- Šaban, Josip
- Šaban, Ivan
- Šaban, Andrija
Institution of application: Državni zavod za patente Republike Hrvatske
Date of application: 11/12/93
Registration number of application: P920536A
Language: hrvatski
Summary: Patent is related to the permanent magnet sincronous
machines.
Keywords: Sincronous machine,
- Type of paper
: Survey/Study
Title: Nuclear energy and technology - Class 1E motor development
and QA development for class 1E motor production
1. year of the development
- Authors:
- Šaban, Ivka (45814)
- Novosel, Nevenka (132021)
- Flegar, Ljerka (95362)
- Zaharija, Dubravka (149686)
- Poljičanin, Ivan (129356)
- Grgić, Davor (114324)
Ordering party: Ministarsvo znanosti
Institution depot: Elektrotehnički fakultet
Year: 1991
Number of pages: 169
Language: hrvatski
Summary: The study contains all acctivities which has done thruogh
the first year of the Project development.
- Type of paper
: Survey/Study
Title: Nuclear energy and technology - The nuclear and
subnuclear equipment developments - 1. year of the development
- Authors:
- Smiljanić, Danijel (32792)
Ordering party: Ministarsvo znanosti
Institution depot: Elektrotehnički fakultet
Year: 1991
Number of pages: 56
Language: hrvatski
Summary: The report paper contains all developments acctivities made
in the first year of the Project.
Keywords: Superconductivity,
- Type of paper
: Survey/Study
Title: Nuclear enery and technology - 2. year of the developments
- Authors:
- Šaban, Ivka (45814)
- Flegar, Ljerka (95362)
- Zaharija, Dubravka (149686)
- Novosel, Nevenka (132021)
- Poljičanin, Ivan (129356)
- Šaban, Josip
- Smiljanić, Danijel (32792)
- Grgić, Davor (114324)
Ordering party: Ministarsvo znanosti
Institution depot: Elektrotehnički fakultet
Year: 1992
Number of pages: 237
Language: hrvatski
Summary: The report paper presents all acctivities made in the 2.
year of the Project.
Keywords: Qualification, Class 1E, Motor,
- Type of paper
: Survey/Study
Title: Nuclear enery and technology - 3. year of the development
- Authors:
- Šaban, Ivka (45814)
- Flegar, Ljerka (95362)
- Novosel, Nevenka (132021)
- Zaharija, Dubravka (149686)
- Grgić, Davor (114324)
- Šaban, Josip
Ordering party: Ministarsvo znanosti
Institution depot: Elektrotehnički fakultet
Year: 1993
Number of pages: 56
Language: hrvatski
Summary: The report paper describes all acctivities made in the 3.
year of the development.
Keywords: Testing, Qualification testing, Ageing, Aging,
- Type of paper
: Survey/Study
Title: Nuclear energy and technology - 4.th year of the
developoment
- Authors:
- Fancev, Tomislav
- Šaban, Ivka (45814)
- Grgić, Davor (114324)
Ordering party: Ministarsvo znanosti
Institution depot: Fakultet za elektrotehniku i računarstvo
Year: 1995
Number of pages: 39
Language: hrvatski
Summary: The report paper presents all acctivities made in 4. year
of the development.
Keywords: Seismic testing, Vibration testing,
- Type of paper
: Survey/Study
Title: Vibration analysis of the electromotor using finite
element
- Authors:
- Fancev, Tomislav
- Šaban, Ivka (45814)
- Grgić, Davor (114324)
Ordering party: Ministarsvo znanosti
Institution depot: Elektrotehnički fakultet
Year: 1995
Number of pages: 36
Language: hrvatski
Summary: The Study contain vibration analysis of the electromotor.
Keywords: Seismic testing,
- Type of paper
: Technical report
Title: The review of the 1E motor development and the 1E motor
qualification
- Authors:
- Šaban, Ivka (45814)
- Šaban, Josip
- Flegar, Ljerka (95362)
- Novosel, Nevenka (132021)
- Poljičanin, Ivan (129356)
- Zaharija, Dubravka (149686)
- Grgić, Davor (114324)
- Fancev, Tomislav
- Špalj, Srđan (162996)
- Grgić, Davor (114324)
Ordering party: Ministarsvo znanosti
Institution depot: Fakultet za elektrotehniku i računarstvo
Year: 1995
Number of pages: 5
Language: hrvatski
Summary: In the technical review are presented all activity in the
Project 2-05-281 and the results of the development. The object is the
motor class 1E and the qualification of the developed motor for the class
1E. At the end the evaluation of the result of the testing is given.
The result of the development is the motor which can put in the
qualification process for class 1EB. The purpose of the Project is entirely
achieved.
Keywords: The class 1E motor development, Motor qualification,
