- Type of paper
: Paper in journal
Title: Relationship of hardness and impact toughness towards the
cooling time at simulation of single pass welding
- Authors:
- Stoić, Antun (190286)
- Samardžić, Ivan (165270)
Journal: Zavarivanje
Number: 1
ISSN: 0044-1902
Volume: 36
Year: 1993
Pages: from 255 to 258
Number of references: 5
Language: hrvatski
Summary: An investigation of relationship of hardness and impact
toughnesstowards the t8/5 cooling time is described. Testing has been
madeon the samples subjected to the simulation of a single passwelding on a
weld thermal cycle simulator "Smitweld TCS 1405".The t8/5 cooling time was
varied within the 4 to 52sec.range. Based on the experimentally determined
values ofhardness and impact toughness, the HV=f(t8/5) and Kv=f(t8/5)curves
have been plotted.
Keywords: HSLA steel, weldability, t8/5 cooling time, hardness, impact toughness.
- Type of paper
: Paper in journal
Title:
- Authors:
- Budić, Ivan (162480)
Journal: Elektrotechnik und Informationstechnik
Number: 6
ISSN: 0932-383X
Year: 1994
Pages: from 299 to 301
Number of references: 5
Language: njemački
- Type of paper
: Paper in journal
Title:
- Authors:
- Katalini', Branko
Journal: MANUFACTURING SYSTEMS
Number: 1
Volume: 23
Year: 1994
Pages: from 65 to 70
Number of references: 48
Language: engleski
Summary: Modern FMS are composed from standard system components
(machine tools, AGV, robots, storage, tools, ...) which are possible to buy
on the world market. But the system components alone cannot guarantee the
funkctionality of FMS. The efficiency of FMS directly depend on FMS
hardware and software design and on the ideas which are implemented. To
realize the most complex FMS with limited resources and a lot of
bottlenecks it is necessary to design and implement sophisticated
algorithms to build up FMS working-scenarious and to solve the conflict
situation and control such a system. This paper describes one new
concept/method of designing control structures for most complex modern FMS.
The method is successfully implemented and verified in practice in one new
Austrian factory as a part of CIM solution. The method is based on queue
theory and priotity structure.
Keywords: FMS, CIM, design, control structure, optimisation, expert system, scheduling strategies, planning, logistic, control strategy.
- Type of paper
: Paper in journal
Title: Design of Control Structures and Scheduling Strategies of
Complex Flexible Manufacturing System
- Authors:
- Katalini', Branko
Journal: Tehnički vjesnik
Number: 1,2
ISSN: 1330-3651
Volume: 1
Year: 1994
Pages: from 13 to 48
Number of references: 60
Language: njemački
Summary: Modern FMS are composed of standard system components
(machine tools, AGV, robots, storage, tools, ...) which it is possible to
buy on the world market. But the system components guarantee the
functionality of FMS. The efficiency of FMS directly depends on FMS
hardware and software design and on the ideas which are implemented. To
realize the most complex FMS with limited resources and a lot of
bottlenecks it is necessary to design and implement intelligent
sophisticated algorithms to build up FMS working-scenarious and to solve
the conflict situation and control such a system. This paper describes one
new concept/method of designing control structures for most complex modern
FMS. The method is successfully implemented and verified in practice in one
new Austrian factory as a part of CIM solution. The method is based on
queue theory and priority structure. The modified method in now in the
phase of implementation on one flexible assembly system for assembling of
electrical motors.
Keywords: FMS, CIM, design, control structure, optimisation, expert system, scheduling strategies, plasnning, logistic, control strategy, flexible assembly system
- Type of paper
: Paper in journal
Title:
- Authors:
- Balić, Jože
- Čuš, Franci
- Prašnički, Martin
- Katalini', Branko
Journal: 3rd International Conference on Automation Technology
Volume: 1
Year: 1994
Pages: from 303 to 306
Number of references: 4
Language: engleski
Keywords: The strategic orientation of Central and East European industry is focused on small and medium sized enterprises which have to be dynamic, flexible and adaptable to the demands of the cooperative market. In order to attain this objective it is necessary to manage a manufacturing system so that flow times from the idea and the design to the manufacture of the product are reduced. Consequently, CIM systems must be introduced and adapted to the needs of small and medium sized enterprises (limited hardware, material and manufacturing resources). According to above started facts, the tool and die production, which is a very important support for a broaad spectrum of industries (like automotive, electric, audio/video, ...) is under pressure. The demands for different tools are increasing and delivery times are shortened. It is not possible to use the method of trials and errors, with a lot of interventions, unapredicted or unexpected works. The paper presents the Computer-Aided Engineering System, done for this type of enterprises.
- Type of paper
: Paper in journal
Title:
- Authors:
- Katalini', Branko
Journal: Elektrotechnik und Informationstechnik
ISSN: 0932-383X
Volume: 111
Year: 1994
Pages: from 257 to 261
Number of references: 14
Language: njemački
- Type of paper
: Paper in journal
Title:
- Authors:
- Cus, F.
- Balić, Jože
- Katalini', Branko
Journal: Revija za aktualna gospodarska vprasanja
Number: 5
ISSN: 0547-3101
Volume: 40
Year: 1994
Pages: from 575 to 576
- Type of paper
: Paper in journal
Title:
- Authors:
- Katalini', Branko
Journal: Elektrotechnik und Informationstechnik
Number: 4
ISSN: 0932-383X
Volume: 112
Year: 1995
Pages: from 169 to 171
Language: njemački
- Type of paper
: Paper in journal
Title: THE FIRST LASER-BEAM CUTTING IN SLAVONSKI BROD
- Authors:
- Lukačević, Zvonimir
- Milinović, Nedeljko
- Stoić, Antun (190286)
Journal: EGE
Number: 5
ISSN: 1330-0628
Volume: 2
Year: 1994
Pages: from 30 to 31
Number of references: 5
Language: hrvatski
Summary: Material and time efficlency is a basic concepiton of a
modern production. Search for optimal utilization of resources has resulted
in finding out various solutions in the concept of manufacture of metal
workpieces. This paper presents a principle and possibilities of laser-beam
cuting of materials and a comparison to the existing cutting technologies.
Keywords: laser, cutting, application
- Type of paper
: Paper in proceedings
Title: Approach to integration educational numerically controlled
machine tool in flexible manufacturing system
- Authors:
- Cvjetičanin, Mirko (7441)
Proceedings title: Zbornik radova XI međunarodno savjetovanje BIAM '92
Language: hrvatski
Place: Zagreb
Year: 1992
ISBN/ISSN: 86-81571-12-5
Pages: from 32 to 36
Meeting: XI međunarodno savjetovanje BIAM '92
Held: from 06/16/92 to 06/20/92
Summary: Paper discusses and analyzes three possible ways inflexible
manufacturing system integration. First based onnetworking but expensive,
second hard-wired but not reliable andthird based on software logical
switches suitable for educationalnumerically controlled machine tools. The
full range of simplepart program preparation commands has been presented
too.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Stefanović, Predrag (73896)
Proceedings title: Zbornik radova XI Međunarodno savjetovanje BIAM' 92
Language: hrvatski
Place: Zagreb
Year: 1992
ISBN/ISSN: 86-81571-12-5
Pages: from 1 to 6
Meeting: XI međunarodno savjetovanje BIAM '92
Held: from 06/16/92 to 06/20/92
- Type of paper
: Paper in proceedings
Title: Tool driven turret head for educational numerically
controlled machine tools
- Editors
- Pandžić, Jerko (176691)
- Cvjetičanin, Mirko (7441)
Proceedings title: Zbornik radova XI Međunarodno savjetovanje BIAM' 92
Language: hrvatski
Place: Zagreb
Year: 1992
ISBN/ISSN: 86-81571-12-5
Pages: from 7 to 10
Meeting: XI međunarodno savjetovanje BIAM '92
Held: from 06/16/92 to 06/20/92
Summary: Paper describes approach to tool driven turret head design
foreducational numerically controlled lathe. For this design twogeneral
requestshave been made:
- solution has to be based on electrical power only (withouthydraulic or
pneumatic source supply)
- small size of turret head beacuse educational lathe workingarea room
restriction
Realized solution has four places for outside turning tool andfour places
for fixed and/or drven tool for inside turning withpossibility for
continues speed regulation.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Cvjetičanin, Mirko (7441)
Pages: from 0 to 0
Meeting: XXIII savjetovanje proizvodnog strojarstva Jugoslavije s međunarodnim učešćem
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Bona:i"-Mandi", Zoran
- Budić, Ivan (162480)
- Mom:inovi', Davor
Proceedings title: ZNANSTVENO-STRUČNI LJEVAČKI SKUP ZAGREB '94
Language: hrvatski
Place: Zagreb
Year: 1994
Pages: from 83 to 93
Meeting: ZNANSTVENO-STRUČNI LJEVAČKI SKUP
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Budić, Ivan (162480)
- Editors
- Gali", Mile
Proceedings title: ZNANSTVENO-STRUČNI LJEVAČKI SKUP ZAGREB 95
Language: hrvatski
Place: Zagreb
Year: 1995
Pages: from 13 to 22
Meeting: ZNANSTVENO-STRUČNI LJEVAČKI SKUP
Held: from 04/21/95 to 04/21/95
- Type of paper
: Paper in proceedings
Title: DURCHLAESSIGKEIT DER FORMEN UND KERNMISCHUNGEN IN
BETRIEBSBEDINGUNGEN
- Authors:
- Budić, Ivan (162480)
- Editors
- Šurina, Tugomir
Proceedings title: ZBORNIK RADOVA 12. MEĐUNARODNO SAVJETOVANJE BIAM 94
Language: hrvatski
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-6037-03-3
Pages: from I-1 to I-4
Meeting: 12. MEĐUNARODNO SAVJETOVANJE BIAM 94
Held: from 06/23/94 to 06/24/94
Summary: Untersuchungen auf Drucklaessigkeit der Formen und Kern
mischungen werden in einem Laboratorium an den Standartprobestuecken
durchgefuehrt mit bekanten Methoden, bei der Normaltemperatur. Unterdessen
geschieht der Prozesss der Abguessegestaltung in Sandformen bei der
erholten Temperatur, wodurch sich auch die Durchlaessigkeit aendert. In der
Arbeit sind einige Methoden und Resultate der Untersuchungen auf
Mischungendurch-laessigkeit bei erhoelten Temperaturen dargestellt, und die
erzeiten Resultaten der Untersuchungen bei der Normaltemperatur
vergleichen.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Katalini', Branko
- Nanasi, Jozef
- Editors
- Šurina, Tugomir
Proceedings title: 12. MEĐUNARODNO SAVJETOVANJE BIAM'94
Language: njemački
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-6037-03-3
Pages: from C-57 to C-60
Meeting: 12. MEĐUNARODNO SAVJETOVANJE BIAM 94
Held: from 06/23/94 to 06/24/94
Summary: Arbeit beschreibt die theoretischen und praktischen Aspekte
der Auslegung und des Einsatzes von Expertensystemen fur moderne flexible
Fertigungssysteme (FFS). Jedes neue Expertensysteme ist in Prinzip, wie
auch jedes FFS Unikat. Bei der Arbeit eines komplexen FFS gibt es eine
Vielfalt von alternativen Ablaufszenarien. Um das bestpassende
Arbeitsszenario zu realisieren ist es notwendig intelligente Entscheidungen
zu treffen. Diese Entscheidungen beeinflussen die Steuerungsstrategie. Beim
Einsatz von Expertensystemen werden die Entscheidungen auf der Wissensbasis
aufgebaut. Hier wird ein Konzept eines Expertensystem dargestellt. Dieses
Expertensystem beruht auf den praktischen Erfahrungen des
Bedienungspersonals bei der Arbeit mit dem FFS.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Katalini', Branko
- Čelar, Stipe
- Editors
- Šurina, Tugomir
Proceedings title: 12. MEĐUNARODNO SAVJETOVANJE BIAM'94
Language: njemački
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-6037-03-3
Pages: from E-9 to E-12
Meeting: 12. MEĐUNARODNO SAVJETOVANJE BIAM 94
Held: from 06/23/94 to 06/24/94
Summary: Die neue Fabrik eines fuhrenden europaischen Herstellers
von Aufzugen wurde in CIM Technologie und Just-In-Time Konzeption
konzipiert. Am Anfang der Produktionskette befindet sich ein komplexes
Fertigungssystem fur Blechbearbeitung. Moderne FFS fur Blechbearbeitung
haben im Vergleich zur spanabhebenden Bearbeitung in ihrer Entwicklung
einen 1-jahrigen Ruckstand. Mangels praktischer Erfahrung muss bei der
Auslegung des Systems zu anderen Methoden gegriffen werden. Bei der
Ausiegung des Systems werden die einzelnen Komponenten des Systems an
SIMAN-CINEMA durchgefuhrten Computersimulationen dahingehend uberpruft, ob
sie einen Engpass darstellen konnen. Anhand der Ergebnisse der Simulation
werden die Systemkomponenten ausgewahlt und die Grundsteuerungsstrategien
festigelegt.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Čuš, Franci
- Balić, Jože
- Katalini', Branko
Proceedings title: Journal fur Betriebswirtschaft
Language: njemački
Place: WIEN, AUSTRIJA
Year: 1994
ISBN/ISSN: 3-85122-437-X
Pages: from 155 to 157
Summary: CIM, TQM, Lean production, kaizen, Simultaneous Engineering
or Fractal Enterprise are notions which represent industrial and
sociological-cultural changes on the crossing to year 2000 in the
enterprises in transition. For the implementation of concrete compatitive
preferences the look of corresponding resources in the enterprises is often
present.
Keywords: flexibility, CIM-philosophy, solutions, profitability
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Drstvenšek, Igor
- Katalini', Branko
Proceedings title: Zbornik radova KoREMA 40
Language: engleski
Place: Zagreb
Year: 1995
Pages: from 517 to 520
Meeting: 40. jubilarni godišnji skup KoREMA
Summary: Many of modern production systems can be presented or
reduced to one-queue based production systems. One queue production systems
means that each single essential subsystem (machine, automatic transport
system, etc.) has at a time one unique queue of orders. Queues are
generated on a central control unit called production conducting desk. The
paper describes the production conducting desk as a unit for controlling
the queues and performing the process planing and process maintaining
actions. It consists of four modules which are joining planing and
maintaining tasks. A scheduling module is a connection between gueues and a
production system. It launches the queued working orders and disturbed
situations.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Katalini', Branko
- Nanasi, Jozef
- Čelar, Stipe
Proceedings title: Zbornik radova KoREMA 40
Language: njemački
Place: Zagreb
Year: 1995
Pages: from 508 to 511
Meeting: 40. jubilarni godišnji skup KoREMA
Summary: Die Funktionsfahigkeit und Effizienz des FFS sind die zwei
wichtigsten Anforderungen an ein FFS. Das kann man durch intelligenete
Losungen von Konfliktsituationen bzw. inteligente Entscheidungen erreichen.
Die wichtigsten Entscheidungen innerhalb des FFS werden am Leitstand
getroffen. In dieser Arbeit ist eine neue Struktur des Leitstandes
dargestellt. Neben klasischen Steuerungsstrukturen sind
Simulationswerkzeuge und wissensbasierte Systeme integriert. Strategische
Entscheidungen werden vom Systemoperator getroffen. Weitere Forschungen
sollen in die Richtungen Diagnostik, Intelligenz und Einbindung von
intelligenten Sensoren fuhren.
- Type of paper
: Paper in proceedings
Title: APPLICATION OF LASER TECHNOLOGY IN MATERIAL CUTTING
PROCESS
- Authors:
- Stoić, Antun (190286)
- Editors
- Šurina, Tugomir
Proceedings title: Zbornik radova 12. međunarodno savjetovanje BIAM'94
Language: hrvatski
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-6037-03-3
Pages: from F-28 to F-31
Meeting: 12. MEĐUNARODNO SAVJETOVANJE BIAM 94
Held: from 06/23/94 to 06/24/94
Summary: Today lase cutting is one of the most important application
of laser technology in production. To provide high cut edge quality, it's
necessary to take care about many influencing parameters. In this paper,
possibility of adjustment of laser beam (centriciy and focal plane
position) by laser cutting system with flying optics and selection of
process cutting parameters (power, cutting speed, gas type and gas
pressure) using base of technological tables, will be analyzed.
- Type of paper
: Paper in proceedings
Title: ANALYSIS OF INFLUENCE FACTORS OF LASER BEAM CUTTING ON CUT
EDGE QUALITY
- Authors:
- Cebalo, Roko
- Stoić, Antun (190286)
- Editors
- Liščić, Božidar
Proceedings title: Obrada materijala laserom
Language: hrvatski
Place: Zagreb
Year: 1995
ISBN/ISSN: 953-96459-0-5
Pages: from 71 to 77
Meeting: Međunarodna konferencija Obrada materijala laserom
Held: from 06/01/95 to 06/03/95
Summary: With significante reducing of total production time, lase
beam cutting have some more advantages comparing to altrnative processes by
which is possible to obtain required cut quality, and these advantages are:
geometrical accurance; narrow HAZ (Heat Effected Zone); very thin oxide
layer; processing without mechanical force. In this paper, influence of
laser power, cutting speed, gas pressure on surface roughness and drops
height, have been considered.
Keywords: Laser, Cut edge quality, Influence factors
- Type of paper
: Paper in proceedings
Title: NC PROGRAMMING AND OPTIMIZING OF LASER BEAM CUTTING
- Authors:
- Cebalo, Roko
- Stoić, Antun (190286)
- Editors
- Liščić, Božidar
Proceedings title: Obrada materijala laserom
Language: hrvatski
Place: Zagreb
Year: 1995
ISBN/ISSN: 953-96459-0-5
Pages: from 95 to 102
Meeting: Međunarodna konferencija Obrada materijala laserom
Held: from 06/01/95 to 06/03/95
Summary: Base approach of modern production is rationally managing
with material and time. Production demands have caused taht jobs in
technological preparation of production, because of its extensiveness and
short terms, have to be automated on acceptable level. Structural elements
of CAPP system and possibilities of NC programming for laser beam cutting
process are described in this paper. Process of automatization and
optimizing possibilities have been analyzed.
Keywords: Laser, CAPP, NC programming, Optimizing
- Type of paper
: Summary in proceedings
Title:
- Authors:
- Budić, Ivan (162480)
- Editors
- Katalini', Branko
Proceedings title: 5. INTERNATIONALES DAAAM SYMPOSIUM
Language: njemački
Place: MARIBOR, SLOVENIJA
Year: 1994
ISBN/ISSN: 3-901509-00-3
Pages: from 061 to 062
Meeting: 5. INTERNATIONALES DAAAM SYMPOSIUM
Held: from 10/27/94 to 10/29/94
- Type of paper
: Summary in proceedings
Title:
- Authors:
- Katalini', Branko
- Editors
- Katalini', Branko
Proceedings title: 5. Internationales DAAAM Symposium
Language: njemački
Place: MARIBOR, SLOVENIJA
Year: 1994
ISBN/ISSN: 3-901509-00-3
Pages: from 197 to 198
Meeting: 5. INTERNATIONALES DAAAM SYMPOSIUM
Held: from 10/27/94 to 10/29/94
- Type of paper
: Summary in proceedings
Title:
- Authors:
- Katalini', Branko
- Editors
- Katalini', Branko
Proceedings title: 5.Internationales DAAAM Symposium
Language: njemački
Place: MARIBOR, SLOVENIJA
Year: 1994
ISBN/ISSN: 3-901509-00-3
Pages: from 199 to 200
Meeting: 5. INTERNATIONALES DAAAM SYMPOSIUM
Held: from 10/27/94 to 10/29/94
- Type of paper
: Summary in proceedings
Title:
- Authors:
- Katalini', Branko
- Čelar, Stipe
- Editors
- Katalini', Branko
Proceedings title: 5. Internationales DAAAM Symposium
Language: njemački
Place: MARIBOR, SLOVENIJA
Year: 1994
ISBN/ISSN: 3-901509-00-3
Pages: from 201 to 202
Meeting: 5. INTERNATIONALES DAAAM SYMPOSIUM
Held: from 10/27/94 to 10/29/94
- Type of paper
: Summary in proceedings
Title:
- Authors:
- Katalini', Branko
- Nanasi, Jozef
- Editors
- Katalini', Branko
Proceedings title: 5. Internationales DAAAM Symposium
Language: njemački
Place: MARIBOR, SLOVENIJA
Year: 1994
ISBN/ISSN: 3-901509-00-3
Pages: from 203 to 204
Meeting: 5. INTERNATIONALES DAAAM SYMPOSIUM
Held: from 10/27/94 to 10/29/94
- Type of paper
: Summary in proceedings
Title:
- Authors:
- Samardžić, Ivan (165270)
- Stoić, Antun (190286)
- Editors
- Katalini', Branko
Proceedings title: 5. Internationales DAAAM Symposium
Language: engleski
Place: MARIBOR, SLOVENIJA
Year: 1994
ISBN/ISSN: 3-901509-00-3
Pages: from 379 to 380
Meeting: 5. INTERNATIONALES DAAAM SYMPOSIUM
Held: from 10/27/94 to 10/29/94
- Type of paper
: Ph.D.
Title:
Faculty: Fakultet strojarstva i brodogradnje ZAGREBAČKO
Author: BUDIĆ IVAN
Date of defense: 09/22/94
Language: hrvatski
Number of pages: 152
Summary: In der Arbeit unter dem Titel "Beitrag zur Kenntnis des
Blasenbildungsmechanismus in den Abguessen" wurde durch systematische
Schrifttumerforschung der jetzige Stand der Kenntnisse ueber
Blasenerscheinung in Abguessen eroertet. Danach stellte man mit Hilfe eines
mathematischen am Rechengeraet bearbeiteten Modells die Verbindung zwischen
einigen Einflussparametern und dem Abguesseblasen fest. Durch eine
experimentale Erforschung der besonderen Probeabguesse wurde die
Zuverlaessgkeit des angewandten Simulationsmodells bestaetigt. Die
Probeabguesse wurden in die Sandformen gegossen unter der Veraenderung der
folgenden Einflussparameter: Feuchtigkeit im Kern, Eingiessenstemperatur
und metallostatischer Hoeche. Auf Grund der Erforschung schlaegt man die
Einfuehrung des Blasen indexes als Mass fuer die Abguessqualitaet vor, die
mit den relevanten Parametern der Fehlerentstehung verbunden ist. Auch
schlaegt man, den Blasenindex in Betracht ziehend, eine
Klassifikationsergaenzung der Giessensfehler vor.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet, Slavonski Brod Osiječko
Mentor: BUDIĆ IVAN
Date of defense: 01/13/95
Author: Pavković Ivan
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet, Slavonski Brod Osiječko
Mentor: BUDIĆ IVAN
Date of defense: 01/25/95
Author: Bekić Anto
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet, Slavonski Brod Osiječko
Mentor: BUDIĆ IVAN
Date of defense: 04/28/95
Author: ŠIMUNIĆ DAMIR
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet, Slavonski Brod Osiječko
Mentor: BUDIĆ IVAN
Author: ŽIVATOVIĆ BOJAN
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet, Slavonski Brod Osiječko
Mentor: BUDIĆ IVAN
Date of defense: 07/17/95
Author: FICI DAMIR
Degree level: D.A.
