- Type of paper
: Book
Title:
- Authors:
- Raos, Pero (121221)
- Čatić, Igor (7792)
Publisher: Društvo plastičara i gumaraca
Year: 1993
Number of pages: 155
- Type of paper
: Book
Title: Injection Moulding Analysis by means of System Theory
- Authors:
- Čatić, Igor (7792)
- Razi, Nada (152475)
- Raos, Pero (121221)
Publisher: Društvo plastičara i gumaraca
ISBN: 86-7483-009-9
Year: 1991
Number of pages: 145
Number of references: 84
- Type of paper
: Book
Title: Selected topics in metal plastic working, Part I
- Authors:
- Povrzanović, Aleksandar (38401)
Publisher: suizdavač Fakultet strojarstva i brodogradnje, tiskanje čeka na financiranje, prihvaćeno kao sveuč. udžbenik
ISBN: nije određen
Year: 1993
Number of pages: 263
Number of references: 127
Summary: This book deals with fundametal topics in deformation
prosessing.The book is divided in six chapters. Ch.1: Fundamental laws
ofmetal working (inhomogenity of deformation and tool design). Ch.2: Stress
and strain analysis with Tresca shear-stress criterionof plastic flow and
Von Mises shear-strain energy criterion.Possibilities of metal working
theory applied to technology. Ch.3: Behaviour of metals during metal
forming: deformability,properties, influence of different factors,
superplasticity,fracture. Ch.4: Flow-stress curves, methods for determining
underdifferent conditions. Ch.5: Influence of temperature and strainrate on
deformability and properties of metal. Ch. 6: Frictiontheories, lubrication
in real deformation process, wear of tool.Appendix: 21 examples solved by
means of metal working theory.
Keywords: Theory of deformation processing, Metal forming plasticity
Other: Knjiga je povoljno recenzirana i preporučena za
objavljivanje.Recenzenti:
Dr. sc. Ivo Alfirević, red. prof. Fakulteta strojarstva ibrodogradnje u
Zagrebu,
Dr. sc. Igor Duplančić, docent Fakulteta elektrotehnike,strojarstva i
brodogradnje u Splitu,
Dr. sc. Franjo Kovačiček, red. prof. Fakulteta strojarstva ibrodogradnje u
Zagrebu.
- Type of paper
: Book
Title: Modern Grinding Technic
- Authors:
- Cebalo, Roko (59430)
Publisher: Školska knjiga
Year: 1991
Number of pages: 90
Number of references: 35
- Type of paper
: Book
Title: Atlas of Machine Tools
- Authors:
- Zdenković, Rudolf (54566)
Publisher: Sveučilišna naklada LIBER
Year: 1991
Number of pages: 285
Number of references: 193
- Type of paper
: Book
Title: Contemporary Grinding Technology
- Authors:
- Cebalo, Roko (59430)
Publisher: vlastita naklada
ISBN: nema
Year: 1993
Number of pages: 138
Number of references: 40
- Type of paper
: Book
Title: Flexible Manufacturing Systems
- Authors:
- Cebalo, Roko (59430)
Publisher: vlastita naklada
ISBN: nema
Year: 1993
Number of pages: 212
Number of references: 34
- Type of paper
: Book
Title: Technology of corrosion protection II - Preteatment for
coatings, aplcation and inspection of metallc coatings
- Authors:
- Esih, Ivan (11364)
- Dugi, Zvonimir
Publisher: Sveučilište u Zagrebu
ISBN: 86-7819-023-X
Year: 1992
Number of pages: 219
- Type of paper
: Paper in book
Title: Contribution to the Tesearch of Hot Tears in Steel
Castings
- Authors:
- Grozdanić, Vladimir (130280)
- Novosel-Radović, Vjera (33706)
- Dmitrović, Radana
- Editors
- Rasmussen, Wayne
Publisher: American Foundrymen Society
ISBN: 0-87433 115-3
Year: 1993
Pages: from 265 to 272
Number of references: 7
Summary: A semiquantitative model of hot tears in low-carbon
steelcastings of centerline symmetry has been presented in paper.Analytical
dependance between pouring temperature, freecontraction rate and
solidification time has been obtained. Acasting with a hot tear has been
examined metallograpically andby means of scanning electronic microscope,
and analyzed by x-raydiffraction.
Keywords: Hot Tears, Steel Casting, Semiquantitative model
- Type of paper
: Paper in book
Title: Martensite Steels with low Content of Carbon
- Authors:
- Novosel, Mladen (57005)
- Editors
- Kovačiček, Franjo
Publisher: Hrvatsko društvo za materijale i tribologiju
ISBN: 953-96038-0-3
Year: 1993
Pages: from 28 to 45
- Type of paper
: Paper in book
Title:
- Authors:
- Novosel, Mladen (57005)
Publisher: Hrvatsko društvo za materijale i tribologiju
ISBN: 953-96038-0-3
Year: 1993
Pages: from 17 to 28
- Type of paper
: Paper in book
Title: Production System Planning
- Authors:
- Vranješ, Božo (53161)
- Jerbić, Bojan (121164)
- Kunica, Zoran (162390)
- Editors
- Taboršak, Dragutin
Publisher: Školska knjiga
Year: 1995
- Type of paper
: Paper in book
Title: Assembly
- Authors:
- Vranješ, Božo (53161)
- Jerbić, Bojan (121164)
- Kunica, Zoran (162390)
- Editors
- Mulc, Andrija
Publisher: Školska knjiga
Year: 1995
- Type of paper
: Paper in book
Title: Contribution to Croatian Technical and Technological
Development
- Authors:
- Vranješ, Božo (53161)
- Jerbić, Bojan (121164)
- Kunica, Zoran (162390)
- Editors
- Maras, Mate
Publisher: Matica Hrvatska
Year: 1993
Pages: from 164 to 169
- Type of paper
: Paper in journal
Title: Polymer Testing
- Authors:
- Čatić, Igor (7792)
Journal: Polimeri
ISSN: 0351-1871
Volume: 12
Year: 1991
Pages: from 66 to 68
Language: hrvatski
- Type of paper
: Paper in journal
Title: Kalup kao šaržni reaktor pri proizvodnji polimernih
tvorevina
- Authors:
- Čatić, Igor (7792)
- Španiček, Đurđica
Journal: Plaste und Kautschuk
Volume: 39
Year: 1992
Pages: from 347 to 350
Language: njemački
- Type of paper
: Paper in journal
Title: The choice of the Croatian term for the cyclic procedure
of manufacturing the foamed product made from prefoamed polystyrene beads
- Authors:
- Čatić, Igor (7792)
Journal: Polimeri
ISSN: 0351-1871
Volume: 13
Year: 1992
Pages: from 195 to 198
Language: hrvatski
- Type of paper
: Paper in journal
Title: Heat Exchange in the Mould for Steam Moulding of
Expandable Poystyrene into Foam Blocks
- Authors:
- Jagodić, Igor
- Čatić, Igor (7792)
- Šercer, Mladen (77160)
Journal: Polimeri
ISSN: 0351-1871
Volume: 13
Year: 1992
Pages: from 42 to 47
Language: hrvatski
- Type of paper
: Paper in journal
Title: Influence of Rubber Moulding Geometry on Achieved Grade of
Crosslinking
- Authors:
- Kiš, Donald (173774)
- Buchenauer, Branka
Journal: Polimeri
ISSN: 0351-1871
Volume: 12
Year: 1991
Pages: from 45 to 50
Language: hrvatski
- Type of paper
: Paper in journal
Title: Simulation Improvement of Mould Cavity Filling by Means of
Segmentation Method
- Authors:
- Kiš, Donald (173774)
- Šantek, Damir
Journal: Polimeri
ISSN: 0351-1871
Volume: 13
Year: 1992
Pages: from 45 to 50
Language: hrvatski
- Type of paper
: Paper in journal
Title: Technological Designing in Contemporary Conception of
Development of Injection Moulded Polymeric Products
- Authors:
- Raos, Pero (121221)
Journal: Polimeri
ISSN: 0351-1871
Volume: 13
Year: 1992
Pages: from 3 to 10
Language: hrvatski
- Type of paper
: Paper in journal
Title: The Influence of Deformation Fields in the Modelling of
Mechanical Behaviour of Rubber Vulcanisate by Means of Modified van der
Waals Model
- Authors:
- Raos, Pero (121221)
Journal: Polimeri
ISSN: 0351-1871
Volume: 13
Year: 1992
Pages: from 147 to 152
Language: hrvatski
- Type of paper
: Paper in journal
Title: Modelling of Mechanical Behaviour of Rubber Vulcanisate
- Authors:
- Raos, Pero (121221)
Journal: Polimeri
ISSN: 0351-1871
Volume: 13
Year: 1992
Pages: from 48 to 55
Language: hrvatski
- Type of paper
: Paper in journal
Title: Proračun parametara modela za primjenu u analizi konačnih
elemenata
- Authors:
- Raos, Pero (121221)
Journal: Kautschuk + Gummi Kunststoffe
Volume: 45
Year: 1992
Pages: from 957 to 963
- Type of paper
: Paper in journal
Title: Influence of Specimen's Shape on Tensile Characteristics
of Rubber Vulcanisate
- Authors:
- Raos, Pero (121221)
Journal: Polimeri
ISSN: 0351-1871
Volume: 13
Year: 1992
Pages: from 13 to 19
Language: hrvatski
- Type of paper
: Paper in journal
Title: Numeričko modeliranje gumolikih materijala koristeći
podatke probe smicanja
- Authors:
- Raos, Pero (121221)
Journal: Engineering Modelling
Volume: 5
Year: 1992
Pages: from 37 to 44
- Type of paper
: Paper in journal
Title: Effects of the Mould Runner System and Process Parameters
on the Quality of Rubber Injection Mouldings
- Authors:
- Šercer, Mladen (77160)
Journal: Polimeri
ISSN: 0351-1871
Volume: 13
Year: 1992
Pages: from 7 to 12
Language: hrvatski
- Type of paper
: Paper in journal
Title: Quick Mould Change Systems
- Authors:
- Šercer, Mladen (77160)
- Buntak, Krešimir
Journal: Polimeri
ISSN: 0351-1871
Volume: 13
Year: 1992
Pages: from 123 to 126
Language: hrvatski
- Type of paper
: Paper in journal
Title: Quality Assurance of Thermoplastic Injection Mouldings
- Authors:
- Šercer, Mladen (77160)
- Reschner, Alfred
- Oroz, Srećko
Journal: Polimeri
ISSN: 0351-1871
Volume: 13
Year: 1992
Pages: from 30 to 34
Language: hrvatski
- Type of paper
: Paper in journal
Title: Theology and Technology - Two Superior Sciences
- Authors:
- Čatić, Igor (7792)
Journal: Treći program Hrvatskog radija
Number: 35
Year: 1992
Pages: from 132 to 137
Language: hrvatski
- Type of paper
: Paper in journal
Title: MOULDEXPERT 92 Expert System
- Authors:
- Šercer, Mladen (77160)
- Slavica, Mladen
- Čatić, Igor (7792)
Journal: Polimeri
Number: 2
ISSN: 0351-1871
Volume: 14
Year: 1993
Pages: from 45 to 49
Language: hrvatski
- Type of paper
: Paper in journal
Title: Systemic Analysis of the Stretching of Thermoplastic
Semi-Products
- Authors:
- Čatić, Igor (7792)
- Travica, Ozren
Journal: Polimeri
Number: 3
ISSN: 0351-1871
Volume: 14
Year: 1993
Pages: from 85 to 92
Language: hrvatski
- Type of paper
: Paper in journal
Title: Ekspertni sustav za uklanjanje vidljivih grešaka na toplo
oblikovanim proizvodima
- Authors:
- Čatić, Igor (7792)
- Slavica, Mladen
- Šercer, Mladen (77160)
Journal: Polimeri
Number: 6
ISSN: 0351-1871
Volume: 14
Year: 1993
Pages: from 297 to 298
Language: engleski
- Type of paper
: Paper in journal
Title: A Comparison of Analogue and Numerical Methods of
Optimizing the Cooling Channel Arrangement in the Mould for Injection
Moulding of Thermoplastics
- Authors:
- Raos, Pero (121221)
- Čatić, Igor (7792)
- Širac, Zlatko
Journal: Polimeri
Number: 1
ISSN: 0351-1871
Volume: 14
Year: 1993
Pages: from 19 to 22
Language: hrvatski
- Type of paper
: Paper in journal
Title: Production Polyamide 6 Casting by Anionic E-Caprolactam
Polymerization
- Authors:
- Mišćević, Marija (31954)
- Čatić, Igor (7792)
- Šercer, Mladen (77160)
Journal: Polimeri
Number: 3
ISSN: 0351-1871
Volume: 14
Year: 1993
Pages: from 125 to 132
Language: hrvatski
- Type of paper
: Paper in journal
Title: Training of Polymer Injection Moulding Manufasturers
- Authors:
- Rogić, Anica (153465)
- Čatić, Igor (7792)
Journal: Polimeri
Number: 3
ISSN: 0351-1871
Volume: 14
Year: 1993
Pages: from 133 to 136
Language: hrvatski
- Type of paper
: Paper in journal
Title: Extrusion Dies for Thermoplastic Profiles
- Authors:
- Čatić, Igor (7792)
- Smolčić, Mladen
Journal: Polimeri
Number: 3
ISSN: 0351-1871
Volume: 14
Year: 1993
Pages: from 133 to 136
Language: hrvatski
- Type of paper
: Paper in journal
Title: Unscrewing Force Calculation in Injection Moulding with
Internal Thread
- Authors:
- Čatić, Igor (7792)
- Ćurćija, N.
- Husnjak, M.
- Buchenauer, Branka
Journal: Polimeri
Number: 3
ISSN: 0351-1871
Volume: 14
Year: 1993
Pages: from 142 to 146
Language: hrvatski
- Type of paper
: Paper in journal
Title: Applicability Comparison of Mean Values Method and V-mask
Method by Controlling the Trend of the Thermoplastics Injection Moulding
Process
- Authors:
- Šercer, Mladen (77160)
- Čatić, Igor (7792)
- Perković, Domagoj
Journal: Polimeri
Number: 3
ISSN: 0351-1871
Volume: 14
Year: 1993
Pages: from 97 to 100
Language: hrvatski
- Type of paper
: Paper in journal
Title: Database of Product Fault Causes in the Thermoforming of
Thermoplastics
- Authors:
- Čatić, Igor (7792)
- Travica, Ozren
Journal: Polimeri
Number: 3
ISSN: 0351-1871
Volume: 14
Year: 1993
Pages: from 116 to 117
Language: hrvatski
- Type of paper
: Paper in journal
Title: Analysis, Diagnostics and Improvement in the Manufacturing
Process for the Production of PE-LD Carrier Bags with Cutouts
- Authors:
- Opsenica, Dane (152453)
- Čatić, Igor (7792)
Journal: Polimeri
Number: 3
ISSN: 0351-1871
Volume: 14
Year: 1993
Pages: from 118 to 124
Language: hrvatski
- Type of paper
: Paper in journal
Title: New PC-Versions of CADMOULD-MEFISTO Programm
- Authors:
- Kiš, Donald (173774)
Journal: Polimeri
ISSN: 0351-1871
Volume: 12
Year: 1991
Pages: from 129 to 130
Language: hrvatski
- Type of paper
: Paper in journal
Title:
- Authors:
- Kiš, Donald (173774)
- Martinez, Vedran
Journal: Polimeri
Number: 3
ISSN: 0351-1871
Volume: 14
Year: 1993
Pages: from 101 to 105
Language: hrvatski
- Type of paper
: Paper in journal
Title: Modeliranje elastičnog ponašanja gume i primjena u analizi
konačnih elemenata
- Authors:
- Raos, Pero (121221)
Journal: Plastics & Rubber Processing & Application
Volume: 19
Year: 1993
Pages: from 293 to 303
Language: engleski
- Type of paper
: Paper in journal
Title: Analiza povišenih deformacija gumenih materijala s pomoću
metode konačnih elemenata
- Authors:
- Raos, Pero (121221)
- Zhu, Y.Y.
- Cescotto, S.
Journal: Polimeri
ISSN: 0351-1871
Volume: 14
Year: 1993
Pages: from 290 to 296
Language: engleski
- Type of paper
: Paper in journal
Title: Manufacturing prices calculation method of polymeric
mouldings
- Authors:
- Raos, Pero (121221)
- Pisk, Darko
Journal: Polimeri
ISSN: 0351-1871
Volume: 13
Year: 1992
Pages: from 23 to 26
Language: hrvatski
- Type of paper
: Paper in journal
Title: Stanje opremljenosti prešaonica zaz injekcijsko prešanje
polimera u Republici Hrvatskoj
- Authors:
- Čatić, Igor (7792)
- Curić, Dijana
Journal: Polimeri
Number: 6
ISSN: 0351-1871
Volume: 14
Year: 1993
Pages: from 310 to 312
Language: engleski
- Type of paper
: Paper in journal
Title: Influence of Cleaning on Appearance of Internal Stresses
of Radiator Elements
- Authors:
- Budić, Ivan (162480)
- Bonačić-Mandinić, Zoran (4456)
- Momčinović, Davor (162410)
Journal: Strojarstvo
Number: 2
ISSN: 0562-1887
Volume: 33
Year: 1991
Pages: from 93 to 96
Number of references: 3
Summary: Blast cleanning has been considered as technological
operationwithout the influence on mechanical properties of castings. Bynow,
therefore, in terms of it there has not been specialresearch. However, the
recent research of radiator elements showthat multiple transits through
blast cleaning machine increaseinternal casting stresses and decrease
bursting stress of theradiator.
Keywords: Blast cleaning, Radiator cleaning, Stress, Internal
- Type of paper
: Paper in journal
Title: Foundry in New Production Circumstances
- Authors:
- Bonačić-Mandinić, Zoran (4456)
Journal: Ljevarstvo
Number: 2
ISSN: 1330-2132
Volume: 34
Year: 1992
Pages: from 31 to 35
Number of references: 10
Summary: In this paper the analysis of development periods in
castingindustries from the beginning of this century up to date isgiven,
with the purpose of the evaluation of the futureevolution. The first period
is based on the use of inherentadvantages of the casting process i.e. the
feasibility offormation, the replicating capability, and the fast
capitalaccumulation. The second period is characterised by thesatisfaction
of demands about quality, work conditions, ecologyand automatization. These
problems are successfuly solved so thatthe foundry has a stabile production
perspective.
Keywords: Foundry, Foundry equipment, Cast metals, Forecasting, Quality, CIM
- Type of paper
: Paper in journal
Title: Effect of Modifier in the Production of Gray Cast Iron
- Authors:
- Budić, Ivan (162480)
Journal: Ljevarstvo
Number: 3
ISSN: 1330-2132
Volume: 34
Year: 1992
Pages: from 73 to 77
Number of references: 5
Summary: Modified gray cast iron doesn't differ a lot in
chemicalstructure from the usual gray cast iron. However, the infusion
ofgray cast iron is done with the purpose to improve the qualityand
mechanical properties. This improvement extends the field ofapplication and
decreases the cast defection. The various ways ofinfusion with the use of
two kinds of modifiers are described inthis paper. The result of infusion
is the change of tensilestrength and hardness of the gray cast iron. On the
basis ofthose changes the most convenient way of infusion has
beendetermined, as well as the kind of modifier.
Keywords: Effect, modifier, Gray cast iron
- Type of paper
: Paper in journal
Title: Possibility of Inoculation of Gray Cast Iron on Mould
Lines Disamatic
- Authors:
- Budić, Ivan (162480)
Journal: Ljevarstvo
Number: 2
ISSN: 1330-2132
Volume: 34
Year: 1992
Pages: from 37 to 41
Number of references: 4
Summary: The characteristics of mould automats Disamatic is that
theymanufacture moulds without metal frame which fold in unbrokenseries,
and that requires the vertical division of moulds. Inregard of vertical
division of moulds and thereby with specificway of infusing, then about
relatively high speed of carryng theheat away some of the produced castings
don't have the neededquality. The improvement of quality and mechanical
properties isachieved with inoculation. In this paper the experience
withvarious equipment for inoculation has been described. The besthas
proved to be the pneumatic equipment.
Keywords: Inoculation, Mould automat Disamatic, Mechanical characteristics
- Type of paper
: Paper in journal
Title: Modification of Ni-Cu alloys with titanium
- Authors:
- Tounec, Sonja (82975)
- Unkić, Faruk (57790)
Journal: Livarstvo
Number: 4
ISSN: 1330-2132
Volume: 35
Year: 1993
Pages: from 87 to 92
Number of references: 4
Summary: The influence of the titanium addition as modification
agent inthe Ni-Cu alloy of nominal composition of 48-51% Ni and 45-38%
Cuwas tested. The modification with titanium was performed in
theconcentration range from zero to 0.2% Ti. Semiquantitativerelationship
between modifier addition and machanical featureswere obtained. Maximum
hardness and strength values were obtainedby addition from 0.05 to 0.1% Ti.
Precipitated particles on thegrain boundary were detected and the fracture
surface analysiswas performd by scanning electron microscope -
electronmicroanalyser. Higer Ti additions cause the strength and
hardnessdecrease, but the strain and contraction increase.
Keywords: Modification, Agent, Titanium
- Type of paper
: Paper in journal
Title: Melting of the cast iron in the electric arc furnace
- Authors:
- Unkić, Faruk (57790)
- Perković, Ivan
- Tounec, Sonja (82975)
Journal: Livarstvo
Number: 4
ISSN: 0024-5402
Volume: 34
Year: 1992
Pages: from 93 to 99
Number of references: 9
Summary: In the paper the cast iron melting features in the electric
arcfurnace have been deal with. The problem regarding the proces ofmelt
recarbonisation, disolution carburising materials and carbonrecoveries have
been presented. The charging procedure, meltingcontrol and melt inoculation
have been considered. The cast ironmelting practice in electric arc
furnaces with relevant dataregading material balance and charging sequence
have beenpresented. In consideration of this the charge,
carburisingmaterial, recoveries and melting technology anebleing
theobtaining of metallurgically qualitative cast iron melts withconsistent
chemical composition have been determinated.
Keywords: Electric arc furnace, Melting, Cast iron
- Type of paper
: Paper in journal
Title: Retained austenite in high-chromium white cast iron
- Authors:
- Unkić, Faruk (57790)
- Novosel-Radović, Vjera (33706)
- Šafar, Franjo
Journal: Livarski vestnik
Number: 3
ISSN: 0024-5135
Volume: 39
Year: 1992
Pages: from 83 to 91
Number of references: 10
Summary: Measuring of the residual austenite content by the
X-raydiffraction method was done on heat treated andmetallographically
prepared samples, dia. 25 mm. Heat treatementconsisted of isothermal
annealin of samples at temperatures from750 to 1250 C in 50 C intervals, 1
h duration and oil quenching.Use in test was CoK radiation on Philips
diffractometer at 45 KVload and 16 mA. Based on the experimentaly
establishedrelationship of residula austenite volume content and
theisothermal annealing temperature of alloyed cast iron sample, itwas
found that the austenitization temperature above 1050 C leadsto
discontinuous gama-phase increase in matrix microstructure,which is
accompained by significant fall in total microstructurehardness.
Keywords: High-chromium white cast iron, austenitization temperature, retained austenite content
- Type of paper
: Paper in journal
Title: Characteristics of tempered high-chromium white cast iron
- Authors:
- Unkić, Faruk (57790)
- Dmitrović, Radana
- Milić, Saša
Journal: Slevarenstvi
Number: 4
ISSN: 47-325
Volume: 40
Year: 1992
Pages: from 136 to 139
Number of references: 6
Summary: The works examines the influence of the tempering
temperature onthe microstructural and mechanical properties of
thehigh-chromium white cast iron. The initial microstructure wasobtained by
quenching high-chromium iron samples at temperaturerenging from 950 to 1250
C. The quenched microstructure wastempered in the 200-600 C interval. A
metalographic analysisexplaines the transformation occuring in quenching
and temperingprocedures.
Keywords: High-chromium white cast iron, qunched and tempered, transformations products
- Type of paper
: Paper in journal
Title: Research of Hot Tears in Steel Catings
- Authors:
- Grozdanić, Vladimir (130280)
Journal: Slevarenstvi
Number: 4
ISSN: 47-325
Volume: 40
Year: 1992
Pages: from 161 to 162
Number of references: 1
Summary: Semiquantitative model of hot tiers in steel castings has
beenpresented in the paper. By means of this model it is possible
todetermine the point of appearance as well as the prpagation ofhot tier.
The possibility of prevention and elimination of hottears can be pointed
out. Linear dependence between poringtemperature, free contraction rate,
and solidification time hasbeen established, and the optimization of
pouring temperature isan example of tear elimination.
Keywords: Steel Casting, Semiquantitative model, Hot Tiers
- Type of paper
: Paper in journal
Title: Mathematical model of solidification of cast steel and
gray iron flange in sand mold
- Authors:
- Grozdanić, Vladimir (130280)
Journal: Livarstvo
Number: 3
ISSN: 0024-5402
Volume: 34
Year: 1992
Pages: from 59 to 65
Number of references: 9
Summary: Formulated mathematical model and the numerical simulation
ofsolidification of casting of relatively comlex geometry,low-carbon steel
flange and grey iron flange of eutecticcomposition, have been presented in
the paper. Mthematical modelhas been based on physical realistic
assumptions, and has beensolved by finite difference method - implicit
alternatingdirections method. This method is chosen because of
greataccuracy and as is of second order with regard to the time andthe
space. Initial conditions are derived as analytical solutionof heat
conduction equation in the case of contact of twodifferent semi infinite
media (mold and metal). The latent heatof fusion incorporated in the
equation for specific heat ofmetal, and temperaturely dependent thermal
properties of allmaterials in the system mould-casting-core, enable to
numericallyaccuratly represent solidification of the flange, that is
thecasting which is common example in foundry pracice. Simulation
ofsolidification enables that in a modern and scientific way pointsto the
points in casting where defects occurence is possible.
Keywords: Solidification, Mathematical Model, Flange, Sand Mold
- Type of paper
: Paper in journal
Title: Methods and algorithms of casting feeding
- Authors:
- Grozdanić, Vladimir (130280)
Journal: Livarstvo
Number: 3
ISSN: 0024-5402
Volume: 35
Year: 1993
Pages: from 59 to 65
Number of references: 51
Summary: Classical and modern methods of casting feeding method
ofmodulus, simulation and method of thermal topological unit, havebeen
discussed in the paper. Method have been analysed in detaliand every method
unique algorithm of casting has beenestablished.
Keywords: Methods, Algorithm, Feeding, Casting
- Type of paper
: Paper in journal
Title: Numerical Simulation of Steel Casting Solidification in
Sand Mold
- Authors:
- Grozdanić, Vladimir (130280)
Journal: Metalurgija
Number: 1
ISSN: 0543-5846
Volume: 30
Year: 1991
Pages: from 47 to 50
Number of references: 3
Summary: Numerical simulation of solidificatiom of T shaped steel
castingin sand mold has been presented in the paper. An algorithm
isobtained by means of implicit alternating-direction method, andprogrammed
in computer language ASCII FORTRAN for UNIVAC 1100.Simulation is performed
for low-carbon steel casting and sandmold of known thermal properties. The
computed results agreedrelatively well with literature data for temperature
measurementthrough solidification of that casting in sand mold.
thediscrepancies were probable due to the fact that thermalproperties of
materials, especiallz mold material, were not wellcharacterized and the
error intrduced by the assumsution ofcomplete thermal contact at the
mold-casting interface.
Keywords: Numerical simulation, Solidification, Steel casting, Sand mold
- Type of paper
: Paper in journal
Title: Computer Simulation of Solidification of Complex Geometry
Castings
- Authors:
- Grozdanić, Vladimir (130280)
- Črnko, Josip
Journal: Železarski zbornik
Number: 4
ISSN: 0372-8633
Volume: 25
Year: 1991
Pages: from 149 to 158
Number of references: 3
Summary: The solidification simulation of casting of relatively
complexgeometry, low-carbon steel valve housing, has been presented inthe
paper. Mathematical model has been based on physicalrealistic assumptions,
and has been solved by finite differencemethod - implicit alternating
directions method. Thesolidification simulation of the casting of
relatively complexgeometry which is a common example in foundry practice,
enablesthe improvement of our knowledge about solidification process
inthese castings, and points in modern and scientific way to thepoints
where defects occurrence is possible and in this way thecasting is not
necessary.
Keywords: Castings, Solidification, Steel, Simulation
- Type of paper
: Paper in journal
Title: Solidification Simulation of Low-carbon Steel Gear Blank
in Sand Mold
- Authors:
- Grozdanić, Vladimir (130280)
Journal: Livarstvo
Number: 1
ISSN: 0024-5402
Volume: 34
Year: 1992
Pages: from 7 to 11
Number of references: 6
Summary: Solidification simulation of low-carbon steel gear blank in
sandmold has been presented in the paper. Mathematical model has
beennumerically solved and programmed in ASCII FORTRAN for thecomputer
SPERRY 1106. On the basis of simulation it is determinedtime of
solidification, way of solidification, and points ofpossible defects in
relatively complex casting which is a commonexample in foundry practice.
Keywords: Simulation, Solidification, Gear blank, Sand mold
- Type of paper
: Paper in journal
Title: Influence of chemical composition and coolin rate on
as-cast microstructure high-chromium white cast iron
- Authors:
- Unkić, Faruk (57790)
Journal: Livarstvo
Number: 3
ISSN: 0352-8936
Volume: 6
Year: 1991
Pages: from 33 to 41
Number of references: 4
Summary: In the work the relationship between independent variables
andmicrostructural and mecahnical properties of as-casthigh-chromium cast
iron structure has been experimenatallyinvestigated. Independently
variables parameters are: alloycomposition, given by ratio Cr/C and cooling
rate, dependent onsample diameter. By microstructure image analyzer the
influenceof composition on the volume precentage of eutectic and
eutecticcarbides has been determined. Using point microanalysis thechromium
distribution between the matrix and carbides has beendetermined. The
high-chromium cast iron microstructure has beenestablished and the
assessment of the dependence of as-caststructure hardness on composition
and cooling rate has beenobtained. The existance of the relationship
between thesevariables war established by metahematical statistic.
Keywords: High-chromium cast iron, Mechanical properties, Cooling rate
- Type of paper
: Paper in journal
Title: Applicability of the Slab Method of Stress Analysis for
Rotational-Symmetric Forging during Closed-Die Forging
- Authors:
- Ćosić, Predrag (94833)
Journal: Strojarstvo
Number: 2
ISSN: 0562-1887
Volume: 33
Year: 1991
Pages: from 143 to 150
Number of references: 12
Summary: As the main criterion for the critical analysis of the
slabmethod we used the significance of action of the followingobserved
factors: inclination angle for the upper and lower dies,fillet radius and
flash thickness on the related (response)variables such as components of
the stress distribution and theshape-difficulty factor. The used analysis
of variance anabled toestablish the potential problems in the validity of
applicationof the slab method, especially in the distribution of the
flowstress and friction factor for different deformation zones duringthe
process of closed die forging.
Keywords: Forge, Rotational-symmetric forging, Slab method, Stress
- Type of paper
: Paper in journal
Title: A Contribution to Application of Upper Bound Elemental
Method in Axisymetric Forging Process
- Authors:
- Math, Miljenko (29524)
Journal: Strojarstvo
Number: 2
ISSN: 0562-1887
Volume: 33
Year: 1991
Pages: from 69 to 74
Number of references: 7
Summary: Tha paper presents one variant of the upper bound method
based onthe limit analysis. The metod uses the sistem of severalelemental
regions and represents an analytical method ofinvestigation of the process
of plastic deformations. By theintroducing of four axisymmetric elemental
regions it is possibleto divide the complex shapes of the part being forged
and performthe procedure of analysis of the closed die forging. A review
oflimit analysis is given on which the method is based and also theway of
application for calculating the forging forces andpredicting of metal flow.
Mathematical model and computer programhave been established for the
complex analysis of forgingprocess.
Keywords: Elemental method, Closed die forging, Plastic deformation
- Type of paper
: Paper in journal
Title: Mathematical Model of Contact Rolling - Possibilities and
Limitations
- Authors:
- Ćosić, Predrag (94833)
Journal: Zbornik radova Fakulteta strojarstva i brodogradnje
Sveučilišta u Zagrebu
Number: 1
ISSN: 0350-3097
Volume: 17
Year: 1993
Pages: from 203 to 211
Number of references: 13
Summary: The influence of the controlling variables (v, Z),
detreminedvariables and accidental variables on the stress state for eachof
the seven distinctive regions in the deformation zone of therolling process
has been considered in the paper. The borders ofthe distinctive regions can
be defined by the bisectional andNewton-Raphson method. The values of back
tension depending on xin B and F regions are defined by Runge-Kutta method
andregression analysis.
Keywords: Contact rolling, Mathematical model, Rolling speed, Back tension
- Type of paper
: Paper in journal
Title: The Prediction of Metal Flow in an Axisymetric Forging
Process
- Authors:
- Math, Miljenko (29524)
Journal: Zbornik radova Fakulteta strojarstva i brodogradnje
Sveučilišta u Zagrebu
Number: 16
ISSN: 0350-3097
Volume: 16
Year: 1992
Pages: from 103 to 108
Number of references: 9
Summary: The paper presents one variant of the upper bound method
which isbased on the limit analysis. The method uses the system ofseveral
standardized elemental regions and represents ananalytical method of the
investigation of the process of plasticdeformations. By introducing four
axisymmetric elemental regions,it is possible to divide the complex shapes
of the part beingforged and perform the analysis of the closed die
forgingprocess. The mathematical model and computer program have
beenestablished for the complex analysis of a forging process.
Keywords: Limit analysis, Upper bound method, Die forging
- Type of paper
: Paper in journal
Title: Investigation of Pipe Steel Flow Stress and Limit
Deformability by Means of Hot and/or Cold Tensile Test
- Authors:
- Golja, Marijan (57764)
- Mamuzić, Ilija (27862)
Journal: Strojarstvo
Number: 1
ISSN: 0562-1887
Volume: 34
Year: 1992
Pages: from 31 to 36
Number of references: 12
Summary: This paper deals with the problems of flow stress and
limitdeformability investigation at elevated temperatures. Our
owninvestigation results of carbon and low-alloyed structural
steelsobtained by hot torsion test in temperature range from 1073 to1473 K
as well as by cold tensile test have been presented.
Keywords: Flow steress, Hot torsion test, Limit deformability, Pipe steel
- Type of paper
: Paper in journal
Title: Contribution to the Research of the Residual Elements
Influence on the Steel Plasticity
- Authors:
- Mamuzić, Ilija (27862)
- Golja, Marijan (57764)
- Križanić, Rade (23663)
Journal: Metalurgija
Number: 4
ISSN: 0543-5846
Volume: 30
Year: 1991
Pages: from 131 to 135
Number of references: 10
Summary: The work presents a short theoretical review of the
residualelement influence on the steel plasticity and gives thecomparison
of the relations of the allawed residual elementquantities in steel, given
in the world literature. Our research,carried out by tensile test and
torsion test methods in thetemperature range 800-1250řC, proved that
residuals had a badinfluence on the plasticity and yield stress, of the
castingstructure, depending on ingot size and the influence was moreobvious
on deformad structure.
Keywords: Residual Elements, Steel Plasticity, Deformed Structure, Casting Structure
- Type of paper
: Paper in journal
Title: Determination of Tensile Stress for Cold Drawing of Steel
Pipes
- Authors:
- Iharoš, Berislav (16913)
- Mamuzić, Ilija (27862)
Journal: Metalurgija
Number: 4
ISSN: 0543-5846
Volume: 30
Year: 1991
Pages: from 137 to 141
Number of references: 11
Summary: The cold flow line was determined for three grades of steel
pipeČ.1212, Č.3100 and Č.1402 by the tensile test method with anundeformed
sample (by M. Rheile). Yensile stress for steel pipecold drwang without a
plug, with a floating plug and with a longplug was measured by a extension
belt measuring transducer. Onthe basis of the test results tensile stress
analyticalexpression were determined for each grade of steel and each
steelpipe cold drawing method. The analytical expression are simpleand
easily applicable and their results are within satisfactorylimits for a
production plant.
Keywords: Tensile Stress, Cold Drawing, Steel Pipe
- Type of paper
: Paper in journal
Title: Stress Decrease Possibility in Tubes - Logarithmic Roll
Pas Design
- Authors:
- Kostelac, Marko (79305)
- Iharoš, Berislav (16913)
Journal: Metalurgija
Number: 4
ISSN: 0543-5846
Volume: 30
Year: 1991
Pages: from 143 to 147
Number of references: 13
Summary: This paper presents a possibility for lower residual
stresses ofcold roll tubes by the new roll pass design. The logarithmic
rollpass design is specified in detail, analysed by distribution
ofindividual true strain in the working section and compared
withMannesmann's.
Keywords: Stress Decrease, Tubes, Logarithmic Roll Pass Design.
- Type of paper
: Paper in journal
Title: Supplement to the Investigation of Two-Phase ŕ+á Titanium
Alloys
- Authors:
- Billy, Jozef
- Mamuzić, Ilija (27862)
Journal: Metalurgija
Number: 2
ISSN: 0543-5846
Volume: 31
Year: 1992
Pages: from 49 to 52
Number of references: 9
Summary: The article presents a brief survey of two-phase titanium
alloysand the reason for the presence of non-homogenous structures inafter
deformation by pressing and forging. On the basis ofinvestigations two
reasons were ascertained for the formation oflocalized deformation bands.
The firs reason is the occurence ofcooler and relatively rigid zones of
conical shape and second andmore frequent reason is the localized adiabatic
heating.
Keywords: Two-phase titanium alloys, Deformation by pressing and forging, Localized deformation bands.
- Type of paper
: Paper in journal
Title: Determination of Deformation Resistance of High-Strengt
Weldable Construction Steel with Bainitic Structure
- Authors:
- Križanić, Rade (23663)
- Hensel, Arno
- Mamuzić, Ilija (27862)
Journal: Metalurgija
Number: 2
ISSN: 0543-5846
Volume: 31
Year: 1992
Pages: from 61 to 66
Number of references: 10
- Type of paper
: Paper in journal
Title: Standard Technology Procedure for Cold Drawing of Steel
Tubes
- Authors:
- Iharoš, Berislav (16913)
Journal: Kovine, zlitine, tehnologije
Number: 1
ISSN: 1318-0010
Volume: 26
Year: 1992
Pages: from 97 to 99
Summary: The standard technology procedure for the cold drawing
process ofsteel tubes, different dimensions, quality and delivericondition,
was made on computer. This software make possiblechoise for the optimal
program of drawing process and dimensionof tools, planning and conducting
of production.
Keywords: Cold Drawing, Steel Tubes, Software.
- Type of paper
: Paper in journal
Title: Structural Changes in Low-Carbon Steels During
Thermomechanical Treatment
- Authors:
- Miranova, Olga
- Drujan, Vladimir
- Mamuzić, Ilija (27862)
Journal: Metalurgija
Number: 1
ISSN: 0543-5846
Volume: 32
Year: 1993
Pages: from 7 to 15
Number of references: 11
Summary: The new way of thermomechanical treatment (TMT) has
beeninvestigated in order to ensure the high value mechanicalproperties of
the finished cold deformed low-carbon steel tubes.During introduction of
the TMT dynamic deformation procedure(bending in the plasticity area,
number of cycles to 30) anessential change occurs in the steel structure
and thereby itbecomes uniform.
Keywords: Low-Carbon steel, Thermomechanical treatment, Mechanical properties, Dynamic deformation.
- Type of paper
: Paper in journal
Title: Application of Expert Systems in Production of Tubes by
Cold Working
- Authors:
- Mamuzić, Ilija (27862)
- Garan, Vyacheslav
- Drujan, Vladimir
Journal: Trasactions of the Technical University of Kosice
Number: 2
ISSN: 0960-6076
Volume: 2
Year: 1992
Pages: from 179 to 184
Number of references: 12
Summary: Problems of creation and application of expert systems on
theexamples of automatizing cold-worked tube productiontechnological
process designing are considered in this study. Anexpert system is capable
to model new decision accptancealgorithms by means of knowledge base
replenishment withtechnology, deformation theory, equipment and decision
choicemethods data which help to optimise production.
Keywords: Expers Sistems, Cold-Worked Tube, Knowledge Base
- Type of paper
: Paper in journal
Title: Optical Modelling of Non-Symmetric Rolling Process
- Authors:
- Šlomčak, Georg
- Mamuzić, Ilija (27862)
Journal: Metalurgija
Number: 3
ISSN: 0543-5846
Volume: 32
Year: 1993
Pages: from 77 to 80
Number of references: 9
Summary: This article gives modelling results of non-symmetric
striprolling between the rolls and the plane groand with adjustment
ofvarious rates and lubrication conditions.
Keywords: Optical Modelling, Rolling Process, Strip, Varions rates
- Type of paper
: Paper in journal
Title: Thermal Fatigue of Cast Steels
- Authors:
- Mamuzić, Ilija (27862)
Journal: Ljevarstvo
Number: 2
ISSN: 0024-5402
Volume: 35
Year: 1993
Pages: from 107 to 111
Number of references: 10
Summary: Thermal fatigue of cast steels, Carbon and
vanadiummicroalloyed was investigated by comparison of the number of
heatexchenges up to destruction in intervals 873-373K, 873-473Kand 873-573
K. The time up to the starting of the samplesdestruction at dynamic loading
of 100 MPa at temperatures 873 and973 K as well as the microstructure was
determined. It was provedthat vanadium microalloying prolog the life of the
samples onaccount of the ferrite deformation and the use of these steelsfor
the dynamic loaded parts at higher temperatures is morereliable.
Keywords: Cast steel, Thermal fatigue, Mechanical properties, Microstructure
- Type of paper
: Paper in journal
Title: Properties Analysis of the St 52-3 Grade Steel After
Thermo-Mechanical Treatment
- Authors:
- Buršak, Marjan
- Michel, Josef
- Mamuzić, Ilija (27862)
Journal: Metalurgija
Number: 3
ISSN: 0543-5846
Volume: 32
Year: 1993
Pages: from 135 to 140
Number of references: 6
Summary: In the present paper the mechanical properties and the
resistanceto brittle fracture are analyzed for a thermo-mechanicallytreated
St 52-3 grade steel. These properties were invwestigatedon three thickness
variants. Considering substructure theparticular reinforcement
contributions are analyzed. The aim ofthis paper is too, the verification
of the validity ofcorrelations derived for mixed structures.
Keywords: Properties of steel, Thermo-mechanical treatmen, Correlation, Structure
- Type of paper
: Paper in journal
Title: The Rheological Model of Deformation Nidus in the Process
of Rolling
- Authors:
- Šlomčak, Georg
- Mamuzić, Ilija (27862)
- Vodopivec, Franc
Journal: Kovine, zlitine, tehnologije
Number: 4
ISSN: 1018-0010
Volume: 27
Year: 1993
Pages: from 335 to 341
Number of references: 10
Summary: On the base of contemporary ideas of metal preeure shaping
theoryand investigation results of metal stress-strained state
duringrolling using variation principles of mechanics, authors studiesof
metals and alloys plastometric classification, aspectdevelopment of a new
model of high deformation nidus -reological,are biven in this study. The
model makes it possible to explainregularities in plastic deformation
intensity distribution innon-contact zones as well as conditions of front
end deformationdepending on plastometric properties of metals.
Confirmingexperimental data and mew regularities of metal
deformationdevelopment before input of feed into the rolls and the
outputare also given in this study.
Keywords: Stress-strained state, Model reological, Deformation, Non-contact zones
- Type of paper
: Paper in journal
Title: Modelling of Plastic Metal Processing
- Authors:
- Mamuzić, Ilija (27862)
- Turk, Radomir
- Balakin, Vladimir
Journal: Metalurgija
Number: 1
ISSN: 0543-5846
Volume: 31
Year: 1992
Pages: from 15 to 20
Number of references: 18
Summary: This paper bives a review of physical modelling. The
procedure ofhollow semi-product "cup" (one phase at seamless pipes
productionby Calmes) was examined by similarity theory in
laboratoryconditions and the real material flow was determined.Mathematical
modelling shows a number of stages which begin withthe problem definition
of the subject and end with the resultanalysis and recommendations for
implementation. The example ofhot rolling of compound wide strips (base
construction steel,addition Cr-Ni steel) was used for optimization of the
striprolling schedule applying the complex mathematical modelling.
Keywords: Physical modelling, Hollow shell, Material flow, Mathematical modelling, Rolling schedule
- Type of paper
: Paper in journal
Title: Formation of Knowledge Bases of Expert Systems for Applied
Problems in Ferrous Metallurgy
- Authors:
- Drujan, Vladimir
- Garan, Vyacheslav
- Mamuzić, Ilija (27862)
Journal: Metalurgija
Number: 1
ISSN: 0543-5846
Volume: 32
Year: 1993
Pages: from 27 to 30
Number of references: 4
Summary: The article deals with the experience in the formation and
use ofknowledge bases of expert systems such as an expert system
forcomputer-aided design of cold-worked tubes production. Problemsof
knowledge base structure and methods of its forming havebeendoscussed.
Keywords: Expert systems, Knowledge Base, Ferrous Metallurgy
- Type of paper
: Paper in journal
Title: Expert Systems and their Application to Metallurgy
- Authors:
- Garan, Vyacheslav
- Drujan, Vladimir
- Mamuzić, Ilija (27862)
Journal: Metalurgija
Number: 4
ISSN: 0543-5846
Volume: 31
Year: 1992
Pages: from 125 to 130
Number of references: 12
Keywords: Expert Systems, application to Metallurgy, Optimize the process
- Type of paper
: Paper in journal
Title: Metal Products to Oil- and Petrochemical Equipments
- Authors:
- Mamuzić, Ilija (27862)
Journal: Metalurgija
Number: 1
ISSN: 0543-5846
Volume: 32
Year: 1993
Pages: from 31 to 35
Number of references: 20
Summary: The demands for the metal products and tendencies
intechnological procedures development have been described. Thelatest
achievements in the combination of two or more processdegrees of quite
different characters have been stated. the stateand development of steel
tubes (seamless and welded) in the worldand the required tubes properties
and grades are particularlypresented. The tubes production procedures are
described, too.
Keywords: Metal products, Oil and Petochemical Equipment, State and development, tubes properties
- Type of paper
: Paper in journal
Title: Directions for Research and Technology of the Plastic
Metal and Alloy Forming
- Authors:
- Mamuzić, Ilija (27862)
- Turk, Radomir
Journal: Metalurgija
Number: 4
ISSN: 0543-5846
Volume: 32
Year: 1993
Pages: from 167 to 176
Number of references: 15
Summary: This paper presents the directions for the research at
theplastic metal and alloy forming, i.e. simulation methods ofresearch.
That refers to the interactionn of the researchsystems, as physical
modelling and simulation as well as computercontrolled simulation related
to the material, forming procedureand application. These directions of
plastic forming technologyemphasize the combination of two or more process
stages of quitedifferent character. They are also acknowledged in
thedevelopment of the technologies of CPS (Compact StripProduction), ISP
(Inline Strip Production) and CPR (Casting,Preeing, Rolling).
Keywords: Directions for Research, Technology of the Plastic Forming, Simulation methods, Development of the Technologie
- Type of paper
: Paper in journal
Title: Deformation Features of Highstrength Bainit Steel
- Authors:
- Križanić, Rade (23663)
- Hensel, Arno
- Mamuzić, Ilija (27862)
- Nikolić, Đurđica (82990)
Journal: Metalurgija
Number: 3
ISSN: 0543-5846
Volume: 32
Year: 1993
Pages: from 69 to 75
Number of references: 10
Summary: The paper deals with investigation of deformation values
ofhighstrength bainit steel; deformation resistence, criticaldeformation
and deformation up to the fracture depending ontesting temperature,
deformation speed and deformations.Investigations are performed on torsion
plastometers. Equationsare derived as dependance of deformation features on
influencingparameters.
Keywords: Deformation resistance, Deformation speed, Torsion plastometer
- Type of paper
: Paper in journal
Title: A Single Grinding Wheel for Rough and Finish Grinding
through Aimed Dressing
- Authors:
- Cebalo, Roko (59430)
Journal: Werkstatt und Betrieb
Number: 3
ISSN: 0043-2792
Volume: 125
Year: 1992
Pages: from 209 to 210
Number of references: 2
Summary: When dressing with a single point diamond, the roughness of
theground surface depends on the number of cutting edges on thegrinding
wheel surface, besides other factors. A mathematicalmodel for linear
dressing when grinding nickel alloy is presentedfor this purpose.
Keywords: grinding wheel surface, single point diamond, roughness of ground surface
- Type of paper
: Paper in journal
Title: Optimum Cutting Data for Machining of Hard Materials
- Authors:
- Wuhib, Yeshitila (134984)
Journal: Strojarstvo
Number: 1
ISSN: 0562-1887
Volume: 35
Year: 1993
Pages: from 5 to 9
Summary: This work deals with research and determination of
themachinability of hard materials with chip-type of machiningoperations.
The performance of tool life andsurface roughness has
been evaluated by turning material Č.4732 (45 HRC) by carbidetools. To
obtain statistically significant results and toestimate factor effects and
interactions, a four-factor two-level
experiment was applied. Experimental result is treated withregession
analysis and confermed with Equations of mathematicalmodel, which shows
dependency of tool life and surface roughnesson cutting speed feed, depth
of cut and tool nose radius.Optimisation of cutting parameters is achieved
by usinggeometric programming method.
Keywords: hard materials, machinability, mathematical models, optimization
- Type of paper
: Paper in journal
Title: The Effect of Tool Geometry and Cutting Data on Surface
Roughness
- Authors:
- Cebalo, Roko (59430)
- Wuhib, Yeshitila (134984)
- Udiljak, Toma (90974)
Journal: Zbornik radova Fakulteta strojarstva i brodogradnje
Sveučilišta u Zagrebu
Number: 12
ISSN: 0350-3097
Volume: 12
Year: 1993
Pages: from 213 to 220
Number of references: 9
Summary: The results of the research on surface roughness obtained
by turning material Č 4732 (45 HRC) is presented in this paper.To obtain
statistically significant results and to estimate
factor effects and interactions, a four-factor two levelexperiment was
applied. The experimental results were treatedwith regression analysis and
confirmed by the equation of
a mathematical model, which shows dependency of surface roughnesson tool
geometry (rî) and cutting data (vc, f, ap). The resultsare applicable to
industrial use.
Keywords: cutting data, tool geometry, surface roughness
- Type of paper
: Paper in journal
Title: Roughness of the Ground Surface by Various Ways of
Grinding
- Authors:
- Cebalo, Roko (59430)
Journal: Zbornik radova Fakulteta strojarstva i brodogradnje
Sveučilišta u Zagrebu
Number: 12
ISSN: 0350-3097
Volume: 12
Year: 1993
Pages: from 221 to 229
Number of references: 7
Summary: Roughness of the ground surface has significant influence
onexploatations characteristics of the part dinamically loaded. Thedepths
of surface roughness are vital, because cuts influence
concentratin stress possible resulting in the fracture of thepart. Since
the depth of surface roughness is an inverse pictureof the grinding wheel
cutting surface roughness, its increasewill increase the chip space and
reduced material removal rate.This paper presents roughness of the ground
surface, obtained bygrinding different materials using different types of
grinding
proceses. The linear dependence of roughness depth and averagearithmetical
roughness of ground surface have been found in allcases.
Keywords: roughness of the ground surface, depth of roughness, reduced material removal rate
- Type of paper
: Paper in journal
Title: CONTRIBUTION TO AUTOMATED ASSEMBLY SYSTEM PLANNING
- Authors:
- Vranješ, Božo (53161)
- Jerbić, Bojan (121164)
- Kunica, Zoran (162390)
Journal: Strojarstvo
Number: 2
ISSN: 0562-1887
Volume: 33
Year: 1991
Pages: from 97 to 110
- Type of paper
: Paper in journal
Title: ESTABLISHING OF QUALITY CIRCLES
- Authors:
- Mikšić, Dragutin (57176)
- Vranješ, Božo (53161)
Journal: Strojarstvo
Number: 5
ISSN: 0562-1887
Volume: 33
Year: 1991
Pages: from 337 to 342
Number of references: 8
- Type of paper
: Paper in journal
Title: QUALITY CIRCLES AS ALTERNATIVE WORKING FORM
- Authors:
- Mikšić, Dragutin (57176)
Journal: Organizacija rada
Number: 3
ISSN: 0471-9506
Volume: 40
Year: 1990
Pages: from 233 to 238
Number of references: 18
- Type of paper
: Paper in journal
Title: HISTORICAL DEVELOPMENT OF THE OF THE MEANING OF
ALTERNATIVE WORKING FORMS
- Authors:
- Mikšić, Dragutin (57176)
Journal: Strojarstvo
Number: 6
ISSN: 0562-1887
Volume: 32
Year: 1990
Pages: from 447 to 456
Number of references: 18
- Type of paper
: Paper in journal
Title: High Strengt low alloyed Steels-Reasons for Application
- Authors:
- Novosel, Mladen (57005)
- Kralj, Slobodan
Journal: Zavarivanje
ISSN: 0044-1902
Volume: 34
Year: 1991
Pages: from 101 to 108
- Type of paper
: Paper in journal
Title: Wear Phenomena in Polymer Production and Processing
- Authors:
- Novosel, Mladen (57005)
Journal: Polimeri
Number: 5
ISSN: 0351-1871
Volume: 13
Year: 1992
Pages: from 153 to 162
- Type of paper
: Paper in journal
Title: Austenite-Ferrite steel resistant to
corrosion(DUPLEX-STEEL), Part I.
- Authors:
- Novosel, Mladen (57005)
- Juraga, Ivan
Journal: Zavarivanje
ISSN: 0044-1902
Volume: 35
Year: 1992
Pages: from 19 to 35
- Type of paper
: Paper in journal
Title: Austenite-Ferrite Steels resistant to corrosion
(DUPLEX-STEELS), Part II
- Authors:
- Novosel, Mladen (57005)
- Juraga, Ivan
Journal: Zavarivanje
ISSN: 0044-1902
Volume: 35
Year: 1992
Pages: from 85 to 96
- Type of paper
: Paper in journal
Title: Influence of Microstrukture on Thermal Fatigue Resistance
of Hot-Work Tool Steels
- Authors:
- Cajner, Franjo (76181)
Journal: Strojarstvo
ISSN: 0562-1887
Volume: 33
Year: 1991
Pages: from 289 to 296
- Type of paper
: Paper in journal
Title: Examination of Phenomena During Tempering of Steel Č3840
- Authors:
- Cajner, Franjo (76181)
Journal: Metalurgija
ISSN: 0543-5846
Volume: 31
Year: 1992
Pages: from 117 to 123
- Type of paper
: Paper in journal
Title: Determining of Carbon Content in Steels by Means of
Optical-Emission- Spectrometric (OES) Methodes
- Authors:
- Turina, Srećko
- Stupnišek, Mladen (76754)
- Rumenjak, Roman
Journal: Strojarstvo
ISSN: 0562-1887
Volume: 35
Year: 1993
Pages: from 165 to 168
- Type of paper
: Paper in journal
Title: HSLA Steels- Machanismus of Strenghtening
- Authors:
- Novosel, Mladen (57005)
- Kralj, Slobodan
Journal: Zavarivanje
ISSN: 0044-1902
Volume: 35
Year: 1992
Pages: from 219 to 227
- Type of paper
: Paper in journal
Title: Investigation of carbon Steel Corrosion in a heterogeneous
Fluidn froman Oil Well
- Authors:
- Esih, Ivan (11364)
- Sorić, Tomslav
- Čabrajac, Stevo
Journal: Nafta
Number: 9
ISSN: -
Volume: 43
Year: 1992
Pages: from 213 to 224
- Type of paper
: Paper in journal
Title: Anorganische Korrosionsschutzschichten. Struktur und
Eigenschaften
Journal: Trasactions of the Technical University of Kosice
Number: 9
ISSN: 0022-9830
Volume: 041
Year: 1992
Pages: from 390 to 391
- Type of paper
: Paper in journal
Title: Properties and Test Methods of Austenitic Steel Welds
- Authors:
- Derniković, Boris
- Jarić, Marija
- Karlušić, Bernard (186453)
Journal: Strojarstvo
Number: 2
ISSN: 0562-1887
Volume: 35
Year: 1993
Pages: from 53 to 60
Number of references: 6
- Type of paper
: Paper in journal
Title: DETERMINATION OF THE OFFSET IMAGE AREAS WEAR BY IMPEDANCE
MEASUREMENTS
- Authors:
- Bosner, Ž
- Korelić, Olga
- Kunst, Melita (24686)
Journal: Acta graphica
Number: 3
Volume: 1
Year: 1991
Pages: from 1 to 5
Number of references: 7
- Type of paper
: Paper in journal
Title: A CONTRIBUTION TO THE OFFSET PRINTNG PLATES WEAR
INVESTIGATON
- Authors:
- Kunst, Melita (24686)
- Korelić, Olga
Journal: Acta graphica
Number: 3
Volume: 3
Year: 1991
Pages: from 113 to 118
Number of references: 4
- Type of paper
: Paper in journal
Title:
- Authors:
- Raos, Pero (121221)
- Čatić, Igor (7792)
Journal: Plaste und Kautschuk
Number: 2
Volume: 41
Year: 1994
Pages: from 77 to 83
Language: njemački
- Type of paper
: Paper in journal
Title: Systemic Analysis of Extrusion Coating of Webs
- Authors:
- Bakša, Krešimir (200634)
- Čatić, Igor (7792)
Journal: Polimeri
Number: 6
ISSN: 0351-1871
Volume: 15
Year: 1994
Pages: from 197 to 203
Language: hrvatski
- Type of paper
: Paper in journal
Title: Notes on System Analysis of the Croatian Language
- Authors:
- Čatić, Igor (7792)
- Šarić, Ljiljana
Journal: Rasprave Zavoda za hrvatski jezik
ISSN: 1330-1233
Volume: 20
Year: 1994
Pages: from 19 to 30
- Type of paper
: Paper in journal
Title: Cable coating Extrusion Analysis by Use of Statistical
Process Control
- Authors:
- Rujnić-Sokele, Maja
- Čatić, Igor (7792)
- Brajković, Nives
Journal: Polimeri
Number: 2
ISSN: 0351-1871
Volume: 16
Year: 1995
Pages: from 59 to 62
- Type of paper
: Paper in journal
Title: The Effects of Moulding and Gate Geometry on the Pressure
Curve in the Mould for Injection Moulding of Rubber Compounds
- Authors:
- Šercer, Mladen (77160)
Journal: Polimeri
Number: 3
ISSN: 0351-1871
Volume: 15
Year: 1994
Pages: from 73 to 77
- Type of paper
: Paper in journal
Title: Thermoplastic Elastomers - Properties, Application and
Processing
- Authors:
- Šercer, Mladen (77160)
Journal: Polimeri
Number: sup1
ISSN: 0351-1871
Volume: 13
Year: 1992
Pages: from 76 to 84
- Type of paper
: Paper in journal
Title: Injection Moulding of Engineering Ceramic
- Authors:
- Šercer, Mladen (77160)
Journal: Polimeri
Number: 1
ISSN: 0251-1871
Volume: 16
Year: 1995
Pages: from 19 to 22
- Type of paper
: Paper in journal
Title: Ponovno pougljičavanje razugljičenih preciznih odljevaka
- Authors:
- Stupnišek, Mladen (76754)
Journal: Gieserei
Number: 11
ISSN: 0016-9765
Volume: 82
Year: 1995
Pages: from 408 to 409
- Type of paper
: Paper in journal
Title: Termodinamičko vrednovanje atmosfera kod postupka
karbonitriranja
- Authors:
- Korušić, M.
- Stupnišek, Mladen (76754)
Journal: Steel resarch
Number: 8
Volume: 66
Year: 1995
Pages: from 349 to 352
Language: engleski
- Type of paper
: Paper in journal
Title: A study of the Properties of Conventional Quenched and
Tempered as well as Austempered Ductile Iron
- Authors:
- Unkić, Faruk (57790)
- Cajner, Franjo (76181)
- Krivohlavek, M.
Journal: Metalurgija
Number: 1
ISSN: 0543-5846
Volume: 33
Year: 1994
Pages: from 35 to 42
- Type of paper
: Paper in journal
Title: Contribution for research property of tempered martensite
and tempered bainite
- Authors:
- Cajner, Franjo (76181)
Journal: Kovine, zlitine, tehnologije
Number: 6
ISSN: 1318-0010
Volume: 28
Year: 1994
Pages: from 533 to 538
Language: hrvatski
- Type of paper
: Paper in journal
Title: Analysis of Contact Rolling Algorithm
- Authors:
- Ćosić, Predrag (94833)
Journal: Strojarstvo
Number: 3/4
Year: 1995
Keywords: Analysis, Algorithm, Contact Rolling
- Type of paper
: Paper in journal
Title: Resistance Simulation in Modul by Continuous Casting of
Steel
- Authors:
- Šešerin, Ivica
- Krajcar, Josip
- Ivanušić, Verica
- Stojadinović, Dragica
Journal: Metalurgija
Number: 4
ISSN: 0543-5846
Volume: 33
Year: 1994
Pages: from 155 to 159
- Type of paper
: Paper in journal
Title: Generalno rješenje zagrijavanja i/ili hlađenja zida
metalurških peći pomoću Jacobijeve 93 funkcije
- Authors:
- Grozdanić, Vladimir (130280)
Journal: Kovine, zlitine, tehnologije
Number: 6
ISSN: 1318-0010
Volume: 28
Year: 1994
Pages: from 239 to 541
- Type of paper
: Paper in journal
Title: Contribution to the steel casting risering and dimension
riser
- Authors:
- Grozdanić, Vladimir (130280)
Journal: Metalurgija
Number: 1/2
ISSN: 0543-5846
Volume: 34
Year: 1995
Pages: from 31 to 34
- Type of paper
: Paper in journal
Title: Influence of Heat Treatment on the features of
high-chromium White Cast Iron
- Authors:
- Unkić, Faruk (57790)
- Popović, Ivan (168611)
- Župan, Darko
Journal: Ljevarstvo
Number: 3
ISSN: 1330-2132
Volume: 36
Year: 1994
Pages: from 59 to 65
- Type of paper
: Paper in journal
Title: Microstructural and Mechanical Properties of the Modified
High-silicon Cast Iron
- Authors:
- Unkić, Faruk (57790)
- Tounec, Sonja (82975)
- Mikulić, Mario
Journal: Strojarstvo
Number: 5/6
ISSN: 0564-1887
Volume: 36
Year: 1994
Pages: from 241 to 245
- Type of paper
: Paper in journal
Title: Review of introduce the Computer Integrated Manufacturing
- CIM System Concept in Foundries
- Authors:
- Šešerin, Ivica
- Unkić, Faruk (57790)
Journal: Ljevarstvo
Number: 4
ISSN: 1330-2132
Volume: 36
Year: 1994
Pages: from 99 to 103
- Type of paper
: Paper in journal
Title: Resistance of Grey Iron to Thermal Fatigue
- Authors:
- Cajner, Franjo (76181)
- Unkić, Faruk (57790)
- Bartolić, J.
Journal: Ljevarstvo
Number: 2
ISSN: 1330-2132
Volume: 37
Year: 1995
Pages: from 31 to 37
- Type of paper
: Paper in journal
Title: Rheological Similarity of Metals and Alloys
- Authors:
- Šlomčak, Georg
- Mamuzić, Ilija (27862)
- Vodopivec, Franc
Journal: Materials Processing Technology
Number: 3
ISSN: 1318-0010
Volume: 40
Year: 1994
Pages: from 315 to 325
- Type of paper
: Paper in journal
Title: Lead as a rheological Model for Investigating Hot Roling
Processes
- Authors:
- Šlomčak, Georg
- Mamuzić, Ilija (27862)
- Vodopivec, Franc
Journal: Trasactions of the Technical University of Kosice
Number: 4
ISSN: 0960-6076
Volume: 3
Year: 1993
Pages: from 331 to 335
- Type of paper
: Paper in journal
Title: The Expert System in Ecology of Metallurgy
- Authors:
- Mamuzić, Ilija (27862)
- Garan, Vyacheslav
- Drujan, Vladimir
Journal: Hutnicke listy
Number: 6
ISSN: 0018-8069
Volume: 39
Year: 1994
Pages: from 5 to 7
- Type of paper
: Paper in journal
Title: The Role of Contact Friction and Rheology in the
Deformation at Plastomeric Tests of Rheologically Complex Materials
- Authors:
- Šlomčak, Georg
- Mamuzić, Ilija (27862)
- Vodopivec, Franc
Journal: Kovine, zlitine, tehnologije
Number: 4
ISSN: 1318-0010
Volume: 28
Year: 1994
Pages: from 579 to 582
- Type of paper
: Paper in journal
Title: Deformation Anomalies of Higher Order during the Plasatic
Extention
- Authors:
- Šlomčak, Georg
- Mamuzić, Ilija (27862)
- Vodopivec, Franc
Journal: Kovine, zlitine, tehnologije
Number: 4
ISSN: 1318-0010
Volume: 28
Year: 1994
Pages: from 583 to 587
- Type of paper
: Paper in journal
Title: Structure and Properties of Stripped Microalloyed Steel
with Yield Stress over 620 MPa
- Authors:
- Šimon, A.
- Mamuzić, Ilija (27862)
Journal: Metallurgy and new Materials researches
Number: 1/2
ISSN: 1221-5503
Volume: 2
Year: 1994
Pages: from 80 to 86
- Type of paper
: Paper in journal
Title: Structure and properties of the Metal of Tubes Produced
from Centrifugally Vacuum Cast Austenitic Stainless Steel Billets
- Authors:
- Lezinskaja, J.
- Mamuzić, Ilija (27862)
- Parilak, L.
- Vodopivec, Franc
Journal: Kovovy materiali
Number: 6
ISSN: 0023-432X
Year: 1994
Pages: from 517 to 521
- Type of paper
: Paper in journal
Title: Relations between Criteria Describing Resistance to
Brittle Fracture and their Utilization for Evaluation Micro-alloyed Steels
- Authors:
- Michel, Josef
- Mamuzić, Ilija (27862)
- Buršak, Marjan
Journal: Metallurgy and new Materials researches
Number: 4
ISSN: 1221-5503
Volume: 5
Year: 1994
Pages: from 11 to 22
- Type of paper
: Paper in journal
Title: Contribution to Investigation of Three-Dimensional Flow of
Materials and Deformation in Hollow Shell Crossrolling
- Authors:
- Golja, Marijan (57764)
- Mamuzić, Ilija (27862)
- Fridrih, H.
Journal: Metalurgija
Number: 1
ISSN: 0543-5846
Volume: 33
Year: 1994
Pages: from 19 to 22
- Type of paper
: Paper in journal
Title: Microstructure and Properties of microalloyed Steel Sheer
with Yield Strength exceeding 620 MPa
- Authors:
- Arpad, Š.
- Mamuzić, Ilija (27862)
Journal: Metalurgija
Number: 4
ISSN: 0543-5846
Volume: 33
Year: 1994
Pages: from 137 to 140
- Type of paper
: Paper in journal
Title: Contribution to designing of the mould for rolls Casting
- Authors:
- Mamuzić, Ilija (27862)
- Gorjanoj, Vj.
Journal: Ljevarstvo
Number: 2
ISSN: 0024-5402
Volume: 36
Year: 1994
Pages: from 37 to 40
- Type of paper
: Paper in journal
Title: Optical Modelling of Non-Stationary Rolling Process
- Authors:
- Šlomčak, Georg
- Mamuzić, Ilija (27862)
- Vodopivec, Franc
Journal: Materials Science and Technology
Number: 3
Volume: 11
Year: 1995
Pages: from 312 to 316
- Type of paper
: Paper in journal
Title: On the Creep Deformation on Single Cristal Ni Base
Superalloy CMSX-3
- Authors:
- Zrnik, J.
- Žitnansky, M.
- Mamuzić, Ilija (27862)
Journal: Metalurgija
Number: 1/2
ISSN: 0543-5846
Volume: 34
Year: 1995
Pages: from 7 to 12
- Type of paper
: Paper in journal
Title: Influnce of Cold Deformation on Mechanical Characteristics
of Aluminium Alloy Al-Cu-Bi-Pb
- Authors:
- Jakšić, D.
- Mamuzić, Ilija (27862)
- Golja, Marijan (57764)
- Curić, Dijana
Journal: Metalurgija
Number: 1/2
ISSN: 0543-5846
Volume: 34
Year: 1995
Pages: from 43 to 46
- Type of paper
: Paper in journal
Title: The Effect of Structural Characteristics of Strengtheming
Phase on Creep Fatique Behavior of Single Crystal Nickel Base Superalloys
- Authors:
- Zrnik, J.
- Hazfinger, M.
- Mamuzić, Ilija (27862)
- Žitnansky, M.
Journal: Metalurgija
Number: 3
ISSN: 0543-5846
Volume: 34
Year: 1995
Pages: from 61 to 66
- Type of paper
: Paper in journal
Title: Resistance to Britlle Fracture by Micro-Alloyed Steels
- Authors:
- Michel, Josef
- Mamuzić, Ilija (27862)
- Buršak, Marjan
Journal: Metalurgija
Number: 3
ISSN: 0543-5846
Volume: 34
Year: 1995
Pages: from 73 to 78
- Type of paper
: Paper in journal
Title: Technological development in Croatia: Restraints and
Prospects as Shown on the Example of Metallurgy
- Authors:
- Mamuzić, Ilija (27862)
Journal: Hrvatsko gospodarstvo
Number: 68
Volume: 5
Year: 1995
Pages: from 42 to 46
- Type of paper
: Paper in journal
Title: Motivation in Computer Integrated Manufacturing (CIM) and
in Human Integrated Manufacturing (HIM)
- Authors:
- Mikšić, Dragutin (57176)
Journal: Održavanje i eksploatacija
Number: 3
ISSN: 1330-4364
Volume: 1
Year: 1995
- Type of paper
: Paper in journal
Title:
- Authors:
- Esih, Ivan (11364)
- Kroneisl, Franjo
Journal: Zbornik radova Fakulteta strojarstva i brodogradnje
Sveučilišta u Zagrebu
Number: 16
Year: 1992
Pages: from 109 to 120
- Type of paper
: Paper in journal
Title:
- Authors:
- Esih, Ivan (11364)
- Kroneisl, Franjo
Journal: Zbornik radova Fakulteta strojarstva i brodogradnje
Sveučilišta u Zagrebu
Number: 16
Year: 1992
- Type of paper
: Paper in proceedings
Title: Sustavnosna analiza injekcijskog prešanja
- Authors:
- Čatić, Igor (7792)
- Raos, Pero (121221)
- Razi, Nada (152475)
Proceedings title: 2nd Mediterranean School on Science and Technology of Advanced Polymer-Based Mat
Language: engleski
Place: Capri, Italija
Year: 1991
Pages: from 0 to 20
Meeting: 2nd Mediterranean School on Science and Technology of Advanced Polymer-based Materials
Held: from 06/20/91 to 06/24/91
- Type of paper
: Paper in proceedings
Title: Izmjena topline u kalupima za parno pjenjenje
polistirenskih tvorevina
- Authors:
- Jagodić, Igor
- Čatić, Igor (7792)
- Šercer, Mladen (77160)
Proceedings title: 50th ANTEC
Language: engleski
Place: Detroit, SAD
Year: 1992
Pages: from 2344 to 2348
Meeting: 50th ANTEC
Held: from 05/06/92 to 05/09/92
- Type of paper
: Paper in proceedings
Title: Simulation of rheological lay-out in a mould cavity during
injection moulding process
- Authors:
- Kiš, Donald (173774)
Proceedings title: Modeliranje u znanosti, tehnici i društvu, Modeliranje neizotermnih procesa
Place: Zagreb
Year: 1992
Pages: from 107 to 115
Meeting: Modeliranje u znanosti, tehnici i društvu
Held: from 12/11/92 to 12/11/92
- Type of paper
: Paper in proceedings
Title: Foundry in New Production Circumstances
- Authors:
- Bonačić-Mandinić, Zoran (4456)
- Editors
- Cebalo, Roko (59430)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Place: Zagreb
Year: 1992
Pages: from 1 to 8
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/05/92 to 05/05/92
Summary: In this paper the analysis of development periods in
castingindustries from die begining of this century up to date is
given,with the purpose of the evaluation of the future evolution. Thefirst
period is based on the use of inherent advantages of thecasting process
i.e. the feasibility of formation, thereplicating capability, and the fast
capital accumulation. Thesecond period is characterised by the satisfaction
of demandsabout quality, work conditions, ecology and automatization.
Theseproblems are successfully solved so that the foundry has astabile
production perspective.
Keywords: foundry, foundry equipment, cast metals, forecasting, quality, CIM
Other: Objavljeno i u časopisu Ljevarstvo, 34,(1992), 31-35
- Type of paper
: Paper in proceedings
Title: Classification Problems of Casting Defects
- Authors:
- Bonačić-Mandinić, Zoran (4456)
- Benić, Dalibor
- Hren, Bogomir
- Momčinović, Davor (162410)
- Žagar, Zdravko (55376)
- Editors
- Cebalo, Roko (59430)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Place: Zagreb
Year: 1992
Pages: from 9 to 14
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/05/92 to 05/05/92
Summary: Computer program and data base for casting defects
according tointernational clasification are carried out. This data
basecontents the description of defects as well as possible causesand
remedial measures of these defects.
Keywords: foundry, casting defects, casting defects clasification, quality, CIM
- Type of paper
: Paper in proceedings
Title: Das Giessen der Radiatoren mit der Formmaschine Disamatic
- Authors:
- Budić, Ivan (162480)
- Editors
- Cebalo, Roko (59430)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Place: Zagreb
Year: 1992
Pages: from 23 to 28
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/05/92 to 05/05/92
Summary: Die Charakteristik der Formmaschinen Disamatic ist
dieHerstellung der Formen ohne Formrahmen, welche sich inunterbrochlicher
Reiche aneinanderfuegen, und welche damitsenkrechte Formverteilung
beanspruchen. Nach der Evidenz derFirma DISA-Kopenhagen ueber dem
Produktionszustand der bisherhergestelten Formanlagen, geht die Tatsache
hervor, dass niemandmit dieser Formmaschinen die Radiatoren produziert.
Trotzdemdieser Informationen, wegen sehr hocher Produktionsleistung
derFormmaschinen Disamatic, in der Firma PLAMEN Slavonska Požega
dieHerstellung der Radiatorengliedern Typ Pozega eingeleitet ist.Das
eingeleitete Verfahren der Giesen, ist bei der Bundesanstaltfuer die
Patenten in Beograd angemeldet. Im Anssatz ist dieKonstruktion der Formen,
mit besonderem Rueckblick auf dieKonstruktionsloesung des Einguss und
Kernentgasungsystemes,gegeben.
Keywords: Entgasung, Entlueftung, Eingussystems
- Type of paper
: Paper in proceedings
Title: A Flexible Foundry for Individual Production of Castings
- Authors:
- Žagar, Zdravko (55376)
- Bonačić-Mandinić, Zoran (4456)
- Editors
- Šurina, Tugomir (48562)
Proceedings title: XI. Međunarodno savjetovanje BIAM 92
Place: Zagreb
Year: 1992
Pages: from 1 to 6
Meeting: XI. međunarodno savjetovanje BIAM '92
Held: from 06/16/92 to 06/17/92
Summary: Foundry conditions of computer integrated production
isdescribed. A drawing of updated flexibile foundry for
individualproduction of castings is given.
Keywords: CIM, flexibility, specialized foundry, particular production
- Type of paper
: Paper in proceedings
Title: Possibility of Production Electric Heating Plates on the
Automatic Moulding Machine By Use Shell Moulds
- Authors:
- Budić, Ivan (162480)
- Bonačić-Mandinić, Zoran (4456)
- Editors
- Šurina, Tugomir (48562)
Proceedings title: XI Međunarodno savjetovanje BIAM 92
Place: Zagreb
Year: 1992
Pages: from 12 to 15
Meeting: XI. međunarodno savjetovanje BIAM '92
Held: from 06/16/92 to 06/17/92
Summary: In this paper production of the electric heating plates
areexplained. The plates are made on the automatic moulding
machineDisamatic byuse of shell moulds. Attained quality and defect
freecasting make this relatively costly process completely usefull.
- Type of paper
: Paper in proceedings
Title: Kontrolle der Modelen fuer die Serienherstellung der
Gusstuecken in den Formen fuer einmallige Anwendung
- Authors:
- Vidović, Drago
- Budić, Ivan (162480)
- Editors
- Šurina, Tugomir (48562)
Proceedings title: XI Međunarodno savjetovanje BIAM 92
Place: Zagreb
Year: 1992
Pages: from 21 to 26
Meeting: XI. međunarodno savjetovanje BIAM '92
Held: from 06/16/92 to 06/17/92
Summary: Unter dem Begriff der Model, versteht es das komplexe
Produkt,welches bilden mindestens zwei Haelften der Modelen, zusammen
mitModelplatten, aber sehr oft erscheinen Kernmodellen,Kerneinlegern,
Schablonen u.a. Der ModelenherstellungszyklusLauft in spezialisierten
Werkstaetten unter der zwischenphasigerund Endkontrolle, vorschriftmassiger
durch Werkstaettszeihnungen.Um das Formen und Auszeiehen vom Sand
zuerleichtern, dieModelenebenen sind schiefmaessig in Formrichtung
bearbeiteten,als auch die Raende sind rundig bearbeiteten. Dies erschwert
dieModelenkontrolle, so dass diese nach besonderer Weise ausfuehrenmuss,
unter Benutzung der Standarden Messzeugen, und speziellenMessaparaturen. In
diesem Schrifttum sind verschiedeneKontrollenarten in der Praxis, mit
Darstellung normalen undspezielen Messaparaturen, angegeben.
Keywords: Das Model, Die Kontrolle, Das Messwerkzeug
- Type of paper
: Paper in proceedings
Title: Methods for Determining Gas Content of Moulding Mixtures
- Authors:
- Bonačić-Mandinić, Zoran (4456)
- Budić, Ivan (162480)
Proceedings title: Hrvatski ljevački godišnji stručni skup Zagreb 93
Place: Zagreb
Year: 1993
Pages: from 43 to 52
Meeting: Hrvatski ljevački godišnji stručni skup Zagreb 93
Held: from 04/16/93 to 04/16/93
Summary: The causes of gas defects in castings are described, with
thespecial regard on the influence of moulding mixture. Differentmethods
for determining the content of gas in mold mixtures aregiven and compared.
Keywords: Gas defects, Moulding mixtures, Blowholes, Pinholes
- Type of paper
: Paper in proceedings
Title: Methods for Measuring the Feeding Efficiency of Castings
- Authors:
- Momčinović, Davor (162410)
Proceedings title: Hrvatski ljevački godišnji stručni skup Zagreb 93
Place: Zagreb
Year: 1993
Pages: from 101 to 110
Meeting: Hrvatski ljevački godišnji stručni skup Zagreb 93
Held: from 04/16/93 to 04/16/93
Summary: Methods for measuring the feeding efficiency of castings
aredescribed.
Keywords: foundry, feeding, measuring methods
- Type of paper
: Paper in proceedings
Title: Measuring of the Feeding Ability of Castings With an
Instrument on the Balance Principle
- Authors:
- Bonačić-Mandinić, Zoran (4456)
- Momčinović, Davor (162410)
- Editors
- Cebalo, Roko (59430)
Proceedings title: Drugo međunarodno savjetovanje proizvodnog strojarstva CIM 93
Place: Zagreb
Year: 1993
Pages: from 41 to 48
Meeting: Drugo međunarodno savjetovanje proizvodnog strojarstva CIM 93
Held: from 11/05/93 to 11/05/93
Summary: Equipment, instrument and principle of experimental
research ofthe feeding ability are described. The mold with the test
castingis put on the balanced table and its shift is registered by asensor.
After pouring the Al alloy soldification begins, and thevolume of the
casting diminishes causing the mass transportwithin the casting itself as
well as debalance of the balancedtable, that is registered by a sensor
related to the time passedfrom the beginning of pouring. That enables to
determine dynamicsand feeding ability.
Keywords: Feeding ability, measuring
- Type of paper
: Paper in proceedings
Title: Testing the Quantity of Developed Gas in Mould and Core
Mixtures Improved by Georg Fischer Method
- Authors:
- Budić, Ivan (162480)
- Bonačić-Mandinić, Zoran (4456)
- Editors
- Cebalo, Roko (59430)
Proceedings title: 2. savjetovanje proizvodnoga strojarstva
Place: Zagreb
Year: 1993
Pages: from 49 to 56
Meeting: Drugo međunarodno savjetovanje proizvodnog strojarstva CIM 93
Held: from 11/05/93 to 11/05/93
Summary: Testing the quantity of developed gas with the classical
GFmethod has many deficiencies in view of accuracy of measurementand
presentation of obtained results. The classification ofcasting binders
developed on the basis of that is not reliable,because the gas
characteristics of the core (the maximum quantyof gas) cannot be accepted
as the universal measure for theclassification of casting binders. Changes
in the standard GFinstruments have been described in this work. Testing of
thequantity of developed gas for several kinds of mixtures has beendone
with modified instruments. The new classification of castingbinders has
been suggested. That classification has taken intoconsideration the
produced pressure and the speed in which gasdevelopes.
Keywords: mould mixture, core mixture, the quantity of gas, porosity
- Type of paper
: Paper in proceedings
Title: The Use of Different Granulation of Silica Sand for Core
Making
- Authors:
- Beslić, Milan
- Budić, Ivan (162480)
- Editors
- Cebalo, Roko (59430)
Proceedings title: 2. međunarodno savjetovanje proizvodnog strojarstva
Place: Zagreb
Year: 1993
Pages: from 57 to 61
Meeting: Drugo međunarodno savjetovanje proizvodnog strojarstva CIM 93
Held: from 11/05/93 to 11/05/93
Summary: Core making is one of significant phases in the process of
columnradiators and boiler elements. The used silica sand
significantlyinfluences cast quality. The shape and the size of sand
grainsdetermine quantity of binder and other additives and conditionthe
design of tools for core making. Different designs of tools,technological
and economic analysis for three different coremixtures are presented in
this paper.
Keywords: silica sand, binder, cast, tools
- Type of paper
: Paper in proceedings
Title: Influence of cooling rate on transformation as-cast
highchrome white cast iron microstructure
- Authors:
- Unkić, Faruk (57790)
- Dmitrović, Radana
- Vučetić, Mirjana
- Editors
- Cebalo, Roko (59430)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Place: Zagreb
Year: 1992
Pages: from 15 to 22
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/14/92 to 05/15/92
Summary: The relationship between cooling rate of highchromium white
castiron sample and microstructural and mechanical properties ofas-cast
structure has been eksperimentally investigated.Transformation mechanism of
as-cast structure has been definedand nature of austenite decomposition has
been obtained. Theresults indicate that exemine variable has
influencedsignificently on kind, quontiti and microstructural
konstituentedistribution, which has determined work properties of
thismaterial castings.
Keywords: Highchrome cast iron, austenite transformation, as-cast microstructure, mehanical properties
- Type of paper
: Paper in proceedings
Title: Mathematical model of solidification of cast steel and
grey iron flange in sand mold
- Authors:
- Grozdanić, Vladimir (130280)
- Editors
- Cebalo, Roko (59430)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Place: Zagreb
Year: 1992
Pages: from 29 to 36
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/14/92 to 05/15/92
Summary: The solidification simulation of the casting of
relativelycomplex geometry, low-carbon steel flange and gray iron flange
ofeutectic composition has been presented in the paper.Mathematical model
has been based on physical realisticassumtions, and has been solved by
finite difference method.Simulation of solidification has been performed so
that thelatent heat of solidification has been incorporated in theequation
for specific heat of metal, and the temperaturedepedence of thermal
properties of all materials in the systemmould - casting - core has been
taken. The solidificationsimulation of flange, that is the casting of
relatively complexgeometry which is common example in foundfy practice,
enablesthet the improvement of our knowledge obout solidificationprocess in
thise castings, and points in a modern and scientificway to the ponts where
defects occurence is possible and in thisway the casting is not necessery.
Keywords: Solidification, mathematical model, flange, sand mold
- Type of paper
: Paper in proceedings
Title: Software for two-dimensional solidification simulation of
axi-symmetrical castings in sand mold
- Authors:
- Grozdanić, Vladimir (130280)
- Editors
- Trbižan, Milan
Proceedings title: Zbornik referatov 33. Livarskog posvetovanja
Place: Portorož, Slovenija
Year: 1992
Pages: from 45 to 53
Meeting: 33. Livarsko posvetovanje
Held: from 05/28/92 to 05/30/92
Summary: Software for solidification simulation of
axi-symmetricalcastings of diferent materials for computer SPERRY 1106 have
beenpresented in paper. Programs have been written in computerlanguage
ASCII FORTRAN and have been loded on floppy disc. Themain characteristic of
computor program is possibility to chosecasting geometry and dimensions,
material for casting, mold, coreand chill to obtain picture obout way of
solidification, themovement of isosolidus, time of solidification and exact
locationof possible defect in the real casting.
Keywords: Solidification, simulation, software program
- Type of paper
: Paper in proceedings
Title: Retained austenite in high-chromium white cast iron
- Authors:
- Unkić, Faruk (57790)
- Novosel-Radović, Vjera (33706)
- Šafar, Franjo
- Editors
- Trbižan, Milan
Proceedings title: Zbornik referatov 33. Livarskog posvetovanja
Place: Portorož, Slovenija
Year: 1992
Pages: from 159 to 171
Meeting: 33. Livarsko posvetovanje
Held: from 05/28/92 to 05/30/92
Summary: The volume content of retained austenite in the
microstructure oftested sample was determined on the basis of the
theoreticalrelationship of the retained austenite content and the
intensityquotient of austenite and martensite difraction lines. It wasfound
the intensity of diffraction lines 200, 220 i 211.Measuring of the X-ray
diffraction intensity was performed by thegraphic method and the electron
integration technique.
Keywords: High-chromium white cast iron, retained austenite, Microstructural and mechanical properties
- Type of paper
: Paper in proceedings
Title: Destabilization annealing of high-chromium white cast iron
- Authors:
- Unkić, Faruk (57790)
- Popović, Ivan (168611)
- Dmitrović, Radana
- Editors
- Trbižan, Milan
Proceedings title: Zbornik referata 32. Livarskog posvetovanja
Place: Portorož, Slovenija
Year: 1991
Pages: from 89 to 98
Meeting: 32. Livarsko strokovno posvetovanje
Held: from 05/23/91 to 05/25/91
Summary: The high-chromium cast iron microstructure has been
establishedas function of isothermal holding time temperature. The micro
andmacro hardness of relevant phases of have been investigated asthe
function of austenite destabilisation temperature. Thetemperature at which
maximum hardness is obtained depends on thecomposition, quenching agent and
wall thickness of the sample andvaries in the range from 920 to 1050 C.
Becouse of isothermalholding at temperature above 1050 C, spheroidization
of eutecticcarbides and leaping increase of volume percentage of
residualaustenite can be noticed in microstructure.
Keywords: High-chromium white cast iron, destabilization annealin temperature, mecahanical and microstructural features
- Type of paper
: Paper in proceedings
Title: Microstructural characteristic of quenched and tempered
high-chromium white cast iron
- Authors:
- Unkić, Faruk (57790)
- Editors
- Trbižan, Milan
Proceedings title: Zbornik referatov 34. Livarskog posvetovanja
Place: Portorož, Slovenija
Year: 1993
Pages: from 213 to 223
Meeting: 34. Livarsko strokovno posvetovanje s sodelovanjem držav heksagonale
Held: from 05/27/93 to 05/29/93
Summary: The work examines the influence of the quenching and
temperingtemperature on the microstructural and mechanical properies ofthe
high-chromium white cast iron. The initial microstructure wasobtained by
quenching high-chromium iron samples at temperatureranging from 950 to 1250
C. The quenched microstructure wastempered in 200-650 C interval. A
metallographic and scanningelectron microscope analysis explaines the
transformationsoccuring in quenching and tempereing procedures.
Keywords: High-chromium white cast iron, qunching, tempering, microstructural analysing
- Type of paper
: Paper in proceedings
Title: Experimantal verification of mathematical model of
solidification of steel casting
- Authors:
- Grozdanić, Vladimir (130280)
- Editors
- Trbižan, Milan
Proceedings title: Zbornik referatov 34. Livarskog posvetovanja
Place: Portorož, Slovenija
Year: 1993
Pages: from 82 to 89
Meeting: 34. Livarsko strokovno posvetovanje s sodelovanjem držav heksagonale
Held: from 05/27/93 to 05/29/93
Summary: Mathematical model of solidification of steel casting of
complexgeometry has been formulated in the paper. The model
wasexperimentaly verified by means of measuring temperatures in somepoint
in the casting and mold. Relative error of model was 4%,and has been
obtained as diference of relative errors between twomeasured points.
Keywords: Solidification, mathematical model, verification
- Type of paper
: Paper in proceedings
Title: Solidification mecanism of vermicular graphite cast iron
- Authors:
- Unkić, Faruk (57790)
- Popović, Ivan (168611)
- Editors
- Palčeka, Petra
Proceedings title: III. medzinarodne metalurgicke sympozium
Place: Žilina, Slovačka
Year: 1993
ISBN/ISSN: 80-7100-169-4
Pages: from 165 to 168
Meeting: III. medzinarodne metalurgicke sympozium
Held: from 11/02/93 to 11/03/93
Summary: The effect of antinodulizing elements, Ti and Al, on the
growthmechanism of vermicular graphite has been explained bymicrostructural
analysis of rapidly quenching samples, obtainedfrom the melt separately
treated with FeSiMgCe-MM alloy andTi+Al. The compact graphite forms mainly
in the course ofeutectic crystallization and the primary form is nodular.
Duringsolidification Ti and Al additions were rejected to the rest ofthe
melt and were piled up at eutectic cell boundary as well asthin liquid
channels. The growth of vermicular graphite developspreferably in the
directions of existing liquid channels, throughwhich graphit is almost in
the entire course of eutecticsolidification connected with interdendritic
residual melt.
Keywords: Vermicular graphite cast iron, effect Ti and Al, growrh mecanism
- Type of paper
: Paper in proceedings
Title: Specific in feeding of steel and cast iron castings
- Authors:
- Živčić, Miroslav
- Unkić, Faruk (57790)
- Editors
- Galić, Mile
Proceedings title: Zbornik predavanja Hrvatskog godišnjeg stručnog skupa
Place: Zagreb
Year: 1993
Pages: from 85 to 99
Meeting: Hrvatski ljevački godišnji stručni skup Zagreb 93
Held: from 04/16/93 to 04/16/93
- Type of paper
: Paper in proceedings
Title: Graphite growth from liquid solutions of cast iron
- Authors:
- Unkić, Faruk (57790)
- Editors
- Galić, Mile
Proceedings title: Zbornik predavanja Hrvatskog ljevačkog godišnjeg skupa
Place: Zagreb
Year: 1993
Pages: from 7 to 19
Meeting: Hrvatski ljevački godišnji stručni skup Zagreb 93
Held: from 04/16/93 to 04/16/93
- Type of paper
: Paper in proceedings
Title: Determinatiom of the friction force in the mould at
continuous casting of steel measuring the acceleration
- Authors:
- Krajcar, Josip
- Šešerin, Ivica
- Ivanušić, Verica
Proceedings title: Zbornik radova, 38. Međunarodni godišnji skup KoREMA
Place: Zagreb
Year: 1993
Pages: from 430 to 431
Meeting: 38. Međunarodni godišnji skup KoREMA
Held: from 04/26/93 to 04/28/93
Summary: The friction force at continuos casting of steel represents
thedifference between the force acting at the mould oscilationduring
casting and in the idle motion. For the measurement ofthis force more
methods are used; extension band, load cell andpower of the oscillator
motor. In this work the friction forcewas determined from the difference of
the accelaretion measuredby a vibrometer; at the idle oscillation, with
load of knownmass and during casting. The method does not require
theinsertension of sensors in the parts of the oscillation system.The
acchieved values of friction force depend on the asccilationparameter.
Keywords: Steel, continuous casting, friction force in the mould
- Type of paper
: Paper in proceedings
Title: Metalografic analysis of white cast iron
- Authors:
- Unkić, Faruk (57790)
- Editors
- Trbižan, Milan
Proceedings title: Metalografska analiza livnih zlitin
Place: Ljubljana, Slovenija
Year: 1992
Pages: from 31 to 41
Meeting: Metalografska analiza livnih zlitin
Held: from 02/07/92 to 02/08/92
Summary: The as-cast and heat treated microstructure of
high-chromiumwhite cast iron has been studyed. Metallographic research
ofas-cast and heat treated microstructure was performed byoptically
microscope MeF2 by means of analysis of polished andeteched samples.
Identification of relevant phases was done byselectively eteching and bz
scanning electrone microscope JOELJXA 50A. It was established that
precipitation of secundarycarbide and austenite decomposition start in zone
of primaryaustenite at eutectic M7C3 carbide, becouse segregation
ofalloying elements and lowering hardenability.
Keywords: White cast iron, metastable solidification, metallographic analysis
- Type of paper
: Paper in proceedings
Title: Solidification Simulation and Risering Algorithm for
Castings
- Authors:
- Grozdanić, Vladimir (130280)
Proceedings title: Zbornik radova KoREMA 37(92), 2. svezak
Place: Zagreb
Year: 1992
Pages: from 7 to 11
Meeting: XI. međunarodno savjetovanje BIAM '92
Held: from 06/16/92 to 06/17/92
Summary: Solidification simulation method has been presented in the
paper,and the one-dimensional mathematical model of solidification
ofcasting in the system sand mould-casting-chill has beendeveloped.
Mathematical model can be solved by finite differencemethod or by finite
element method. On the basis of simulationrisering algorithm for castings
has been established.
Keywords: Casting, Risering, Solidification Simulation
- Type of paper
: Paper in proceedings
Title: Trends in Research of Metal Deformations Technologies
- Authors:
- Povrzanović, Aleksandar (38401)
- Editors
- Šurina, Tugomir (48562)
Proceedings title: Zbornik radova XI međunarodnog savjetovanja BIAM 92
Place: Zagreb
Year: 1992
ISBN/ISSN: 86-81571-12-5
Pages: from 2 to 10
Meeting: Jedanaesto međunarodno savjetovanje BIAM '92, Zagreb1992
Held: from 06/16/92 to 06/17/92
Summary: This paper deals with research development in metal
deformationtheory and methods used for solving practical problems
oftechnology. One example of a simulation method as a result oflong-dated
research in forging technology is shown. A new complexsolution of stable
forging process as flexible production systemis made due to intensive
research. The results of recent researchwork in Croatia during the war in
1991 are given.
Keywords: Deformation processing, Research, Application
- Type of paper
: Paper in proceedings
Title: Introductory Review of Papers dealing with Metal
Deformation Processing
- Authors:
- Povrzanović, Aleksandar (38401)
- Editors
- Cebalo, Roko (59430)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva II.
Place: Zagreb
Year: 1992
ISBN/ISSN: nije određen
Pages: from 21 to 25
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/05/92 to 05/05/92
Summary: This paper deals with scientific and practical research in
metalworking processes done in Croatia during 1991.
Keywords: Metal Working, Research
- Type of paper
: Paper in proceedings
Title: Technology and production processes in metal plastic
working and founding aided by computer
- Authors:
- Povrzanović, Aleksandar (38401)
- Editors
- Cebalo, Roko (59430)
Proceedings title: CIM '93-Pozvana i uvodna predavanja
Place: Zagreb
Year: 1993
ISBN/ISSN: nije određen
Pages: from 1 to 12
Meeting: Drugo međunarodno savjetovanje proizvodnog strojarstva CIM 93
Held: from 11/18/93 to 11/18/93
Summary: This paper deals with CIM concept in metal deformation
processingand founding. Difficulties in CAM/CAD application in
thesetechnologies are discussed. A relatively small possibility ofprocess
planing by means of expert system in forming, forging andfoundry practice
is due to unstable caracteristics oftechnologies. A critical review of
papers dealing withdeformation processes and foundry practice presented is
given.
Keywords: CIM Concept, Metal Deforming Processing, Foundry Practice
- Type of paper
: Paper in proceedings
Title: The Analysis of the Slab Method of Stress Ananlysis for
Rotational-Symmetric Forging during Closed-Die Forging
- Authors:
- Ćosić, Predrag (94833)
- Editors
- Alfirević, Ivo (303)
Proceedings title: Zbornik radova 7. jugosl. simpozija o plastičnosti 1991
Place: Pula
Pages: from 196 to 201
Meeting: 7. Jugoslavenski simpozij o plastičnosti
Held: from 06/05/91 to 06/07/91
Summary: As the main criterion for a critical analysis of the slab
methodwe have used a significance of the action for the observedfactors
(flash width, flash thickness and coefficient offriction) on the depend
(response) variable like components ofthe stress distribution. The used
analysis of variance hasenabled us to establish the potential problems in
validity of theapplications of slab method, especially by reason of
thedistribution of the flow stress and coefficient of friction forthe
different deformation zones during process of closed-dieforging.
Keywords: Slab, Closed-die forging, Stress
- Type of paper
: Paper in proceedings
Title: Contribution of the Creation Mathematic Modell of the
Contact Rolling
- Authors:
- Ćosić, Predrag (94833)
- Editors
- Šurina, Tugomir (48562)
Proceedings title: Zbornik radova BIAM '92
Place: Zagreb
Year: 1992
ISBN/ISSN: 86-81571-12-5
Pages: from 16 to 21
Meeting: Jedanaesto međunarodno savjetovanje BIAM '92, Zagreb1992
Held: from 06/16/92 to 06/17/92
Summary: In the theoretical part back tension, variability of
frictionconditions, work hardening of metal and kinematic viscosity wereall
considered for defining the stress state for each of sevendistinct zones in
the roll bite. In the experimental partmeasuremets of the back tension as a
function of rolling force,thickness, flatness and rolling speed were
performed on aproduction four-high rolling mill. In the experimental
partmeasurements of the kinamtic viscosity as a function of alcohol,acid,
temperature werw performed too.
Keywords: Contact rolling, Back tension, Rolling speed, Flatness
- Type of paper
: Paper in proceedings
Title: Critical Comparison Slab Method and the Criteria of
Shape-Difficulty Factor for the Rotational-Symetric Forging
- Authors:
- Ćosić, Predrag (94833)
- Editors
- Cebalo, Roko (59430)
Proceedings title: Zbornik radova savjetovanja Suvremeni trendovi proizvodnog strojarstva
Place: Zagreb
Year: 1992
ISBN/ISSN: nije određen
Pages: from 17 to 23
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/05/92 to 05/05/92
Summary: The analysis used has enabled us to establish the
potentialproblems in validity of the application of slab method and
thecomparison by the application criteria of shape-difficultyfactor.
Keywords: Slab method, Criteria of shape-difficulty factor, Rotational-symetric forging
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Ćosić, Predrag (94833)
- Editors
- Kuljanić, Elzo
Proceedings title: Advanced Manufacturing Systems and Technology, Vol.II
Place: Udine, Italija
Year: 1993
Pages: from 211 to 218
Meeting: Third Internationa Conference on Advanced Manufacturing Systems and Technology AMST '93
Held: from 04/26/93 to 04/27/93
Summary: In the theoretical part, back tension, variability of
frictionconditions and kinematic viscosity are considered for definingthe
stress state for each of the seven distinct zones in the rollbite. The
possibility of application of obtained regressionequations in the real
production process is examined consideringtheir limitations, the influence
of uncontrolled variables, thedisturbance of production process, the
problem of generalizationof obtained regression equations and stabilization
of productionprocess. In the experimental part of the measurements of the
backtension as a function of rolling force, thickness, flatness androlling
speed performed on a production four-high rolling millare considered. The
measurements of the kinematic viscosity as afunction of lauryl alcohol,
lauryl acid and temperature areconsidered too.
Keywords: Contact rolling, Back tension, Rolling speed, Flatness
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Ćosić, Predrag (94833)
- Editors
- Jezernik, Anton
Proceedings title: Proceedings, Part 1, Intern. Conference Design to Manufacture in Modern Industry
Place: Bled, Slovenija
Year: 1993
Pages: from 283 to 291
Meeting: International Conference Design Manufacture in Modern Industry
Held: from 06/07/93 to 06/09/93
Summary: In the theoretical part, back tension, rolling speed,
workingroll roughness, work roll radius and variability of
frictionconditions are considered for defining the stress state.
Thepossibility of application of the regression equations obtainedin the
real production process is examined taking into accounttheir limitations,
the influence of uncontrolled variables, thedisturbance of production
process, the problem of obtainedregression equations generalization and
stabilization ofproduction process. The sensitivity of the original
algorithm inthe case when optimization techniques are used in order to
findout the fastest way of attaining the optimum values during
theproduction process is discussed.
Keywords: Contact rolling, Back tension, Rolling speed, Flatness, Optimization
- Type of paper
: Paper in proceedings
Title: Features of the Solution of Optimizing Contact Rolling of
Ultra Thin Foil
- Authors:
- Ćosić, Predrag (94833)
- Editors
- Cebalo, Roko (59430)
Proceedings title: Zbornik radova savjetovanja CIM '93
Place: Zagreb
Year: 1993
Pages: from 1 to 8
Meeting: Drugo međunarodno savjetovanje proizvodnog strojarstva CIM 93
Held: from 11/18/93 to 11/18/93
Summary: The possibility of application of the regression
equationsobtained in the real production process is examined taking
intoaccount their limitations, the influence of uncontrolledvariables, the
disturbance of production process, the problem ofthe obtained regression
equations, generalization andstabilization of production process. The
sensitivity of theoriginal algorithm in the case when optimization
techniques areused in order to find out the fastest way of attaining
theoptimum values during the production process is discussed.
Keywords: Contact rolling, Optimization, Back tension, Rolling speed, Flatness
- Type of paper
: Paper in proceedings
Title: The Simulation of the Flow Behaviour in an Axisymetric
Forging Process
- Authors:
- Math, Miljenko (29524)
- Editors
- Alfirević, Ivo (303)
Proceedings title: Zbornik radova 7. jugosl. simpozija o plastičnosti
Place: Pula
Year: 1991
Pages: from 151 to 156
Meeting: 7. Jugoslavenski simpozij o plastičnosti
Held: from 06/05/91 to 06/07/91
Summary: The paper considers the way of application of an
incrementalanalytical method for computing the forging force and energy
aswell as the prediction of metal flow. The method is based on theupper
bound elemental technique. Details and results for one typeof closed die
forging are given.
Keywords: Upper bound method, Elemental method, Die forging
- Type of paper
: Paper in proceedings
Title: The Application of Elemental Upper Bound Method in an
axisymmetric Forging Process
- Authors:
- Math, Miljenko (29524)
- Editors
- Cebalo, Roko (59430)
Proceedings title: Zbornik radova savjetovanja Suvremeni trendovi proizvodnog strojarstva
Place: Zagreb
Year: 1992
Pages: from 9 to 16
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/05/92 to 05/05/92
Summary: This paper presents one variant of upper bound method based
onthe limit analysis. Using several standardized geometricalelemental
regions to divide the billet, it is possible to analysethe process of
plastic flow, predict the forging force and flowof material.
Keywords: Limit analysis, Upper bound, Elemental method
- Type of paper
: Paper in proceedings
Title: The Simulation of Metal Flow and Prediction of its
Property in an axisymetric Forging Process
- Authors:
- Math, Miljenko (29524)
- Editors
- Šurina, Tugomir (48562)
Proceedings title: Zbornik radova XI. međunarodnog savjetovanja BIAM '92
Place: Zagreb
Year: 1992
ISBN/ISSN: 86-81571-12-5
Pages: from 28 to 34
Meeting: Jedanaesto međunarodno savjetovanje BIAM '92, Zagreb1992
Held: from 06/16/92 to 06/17/92
Summary: The paper presents one variant of the upper bound method
which isbased on the limit analysis. The method uses the system ofseveral
standardized elemental regions and represents ananalytical method in
investigation of the process of plasticdeformation. By the introduction of
four axisimmetric elementalregions it is possible to divide the complex
shapes of the partbeing forged, and perform the procedure of analysis of
the closedie forging. Mathematical model and computer program have
beenestablished for the complex analysis of forging process.
Keywords: Simulation, Elemental method, Axisymmetric forging
- Type of paper
: Paper in proceedings
Title: The Improvement the Process of Bending the Top of
Electrodes from Material VARMAT 3
- Authors:
- Math, Miljenko (29524)
- Editors
- Šurina, Tugomir (48562)
Proceedings title: Zbornik radova XI Međunaroodnog savjetovanja BIAM '92
Place: Zagreb
Year: 1992
ISBN/ISSN: 86-81571-12-5
Pages: from 34 to 39
Meeting: Jedanaesto međunarodno savjetovanje BIAM '92, Zagreb1992
Held: from 06/16/92 to 06/17/92
Summary: In this paper it is presented the result of investigation
thebending the tops of electrodes from material VARMAT 3. It ismaterial of
specifical physical and mechanical propertiesinconvenient for the
deformation treatment, and is in use as thecarrier of electrodes for
welding car and other sheet metal. As aresult of investigation it is found
the significantly improvementthe quality of the top of electrodes being
bended in thedifferent scheme of stresses, and owing to that
thesignificantly improvement of the process of bending the treatedalloy.
Keywords: Bending, VARMAT 3, Electrode
- Type of paper
: Paper in proceedings
Title: Model Investigation of Metal Flow trough Hollow-Die
- Authors:
- Duplančić, Igor (10940)
- Prgin, Jere (68474)
- Editors
- Cebalo, Roko (59430)
Proceedings title: Zbornik radova savjetovanja Suvremeni trendovi proizvodnog strojarstva
Place: Zagreb
Year: 1992
Pages: from 33 to 40
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/05/92 to 05/05/92
Summary: This paper presents an original method for model
investigation ofmetal flow through hollow die on a small hydraulic press.
Theinfluence of the mandrel support geometry and height of weldingchamber
on process of joining as well as metal flow was observedby using a special
die covered by glass. A different coloredplasticine was used as testing
material. Increasing of feed angleon the exit side of the bridges and
increasing of height ofwelding chamber have a significant contribution on
filling crosssection area and quality of longitudinal joints of the
hollowshapes.
Keywords: Metal flow, Hollow die
- Type of paper
: Paper in proceedings
Title: CONTRIBUTION INVESTIGATIONS STEEL FLOW STRESS BY HOLLOMANS
METOD
- Authors:
- Golja, Marijan (57764)
- Mamuzić, Ilija (27862)
- Kolar, Željka
Proceedings title: Zbornik 7. Jugoslavenskog simpozija o plastičnosti
Place: Pula
Year: 1991
Pages: from 238 to 242
Meeting: 7. Jugoslavenski simpozij o plastičnosti
Held: from 06/05/91 to 06/07/91
Summary: In the work the design of user programme for the analysis
ofexperimental data for metal flow stress and the results of
suchdeterminations of metal flow stress for several steel grades havebeen
presented.
Keywords: Steel Flow Stress,
- Type of paper
: Paper in proceedings
Title: Deformation Resistance of Highstrength Construction Bainit
Steel
- Authors:
- Križanić, Rade (23663)
- Mamuzić, Ilija (27862)
- Nikolić, Đurđica (82990)
Proceedings title: Zbornik 7. jugoslavenskog simpozija o plastičnosti
Place: Pula
Year: 1991
Pages: from 247 to 253
Meeting: 7. Jugoslavenski simpozij o plastičnosti
Held: from 06/05/91 to 06/07/91
Summary: At first was given a short teoretical rewiew of
highstrengthconstruction bainit steel with Rv up 600 MPa and Rm up 750
MPa.At various variants thermomechanical forming and criticaldeformation
was investigated.
Keywords: Deformation resistance, Bainit steel, Deformation speed
- Type of paper
: Paper in proceedings
Title: The Expert Systems in Ecology of Metallurgy
- Authors:
- Mamuzić, Ilija (27862)
- Drujan, Vladimir
- Garan, Vyacheslav
Proceedings title: International Conference Metallurgy EAST-WEST 93
Place: Košice, Slovačka
Year: 1993
Pages: from 170 to 179
Meeting: International Conference Metallurgy EAST-WEST 93
Held: from 10/11/93 to 10/14/93
Summary: Besides the paper on which the expert system is built, the
aim ofthe papers is to create the atomatized programme technicalobservation
ecological continuous system of formation andprediction of gaseous dust
consequences in technologicalaggregate of metalurgien plants. The are used
adaptedmathematical models.
Keywords: Expert system, Ecology, Automatized programme, Adapted mathematical model
- Type of paper
: Paper in proceedings
Title: Metal Products, with Special Concern to Pipes, Current
Achnements Related to Applications in Petrochemical Plants
- Authors:
- Mamuzić, Ilija (27862)
Proceedings title: Metali i zavarivanje u naftnim i petrokemijskim postrojenjima
Place: Sisak
Year: 1992
Pages: from 45 to 52
Meeting: Materijali i zavarivanje u naftnim i petrokemijskim postrojenjima
Held: from 11/19/92 to 11/20/92
Summary: Together with kinds of materials applied in oil and
petrochemicalplants, new changes in world metallurgical
production,requirements specified for metal products and future trends
indevelopment of technological processes are presented. Specialconcern has
been given to the curent state and development ofpipes in the world, both
seam and seamless
Keywords: Metal products, metallurgy, Properties of material, Working processes, Steel pipes
- Type of paper
: Paper in proceedings
Title: Thermomechanical Hightemperature Rolling Conditions of
Highstrength Construction Strip and Billet Bainit Steel
- Authors:
- Križanić, Rade (23663)
- Mamuzić, Ilija (27862)
- Nikolić, Đurđica (82990)
Proceedings title: Proceedings XI International Conference BIAM '92, Part 2
Place: Zagreb
Year: 1992
Pages: from 22 to 27
Meeting: KoREMA 37/1992 - Međunarodno savjetovanje
Held: from 06/16/92 to 06/17/92
Summary: The paper includes application of reseaching results on
plantsand in production process of rolled strips in the conditions
ofthermomechanical forming.
Keywords: Rolling, bainit steel, hot rolled strip, natural deformation resistance, real deformation resistance
- Type of paper
: Paper in proceedings
Title: Influence of Cutting Parameters and Cooling on Surface
Roughnes at Milling
- Authors:
- Šavar, Šime (46185)
- Udiljak, Toma (90974)
- Yeshitila, Wuhib (134984)
Proceedings title: YUTRIB-91
Place: Dubrovnik
Year: 1991
Pages: from 0 to 0
Meeting: YUTRIB'91
Summary: This work deals with testing of surface quality
obtained
by up-cut and down-cut milling as function of speed and feed
rate under different cooling conditions. By processing of
experimental results, the equations which describe dependency
of parameters Ra and Rmax on speed and feed rate were obtained.
The results are applicable for industrial use when applied on
material š 4730 and under conditions defined in the
experimental frame.
Keywords: slab milling, cutting data, cooling, suraface roughnes
- Type of paper
: Paper in proceedings
Title: An Overview of Research in the Area of Metal Cutting
- Authors:
- Šavar, Šime (46185)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva II
Place: Zagreb
Year: 1992
Pages: from 37 to 44
Meeting: Savjetovanje proizvodnog strojarstva
Held: from 05/09/92 to 05/09/92
Summary: The work gives an overview on state of the art in the area
ofmetal cutting. It emphasize the significance of development
andapplication of information technologies in meatal cutting. Itponits out
the requests on researcher at the end of 20th centuryand gives the current
reseach topics. In the second part articalpresents the works that were in
the section "Metal cutting".
Keywords: metal cutting, theory of cutting, technoeconomical aspects
- Type of paper
: Paper in proceedings
Title: Optimization of Cutting Data for Slab (up-cut and
down-cut) Milling
- Authors:
- Šavar, Šime (46185)
- Udiljak, Toma (90974)
- Yeshitila, Wuhib (134984)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Place: Zagreb
Year: 1992
Pages: from 1 to 12
Meeting: Savjetovanje proizvodnog strojarstva
Held: from 05/09/92 to 05/09/92
Summary: This paper treats the problems of surface roughness
obtained atslab (up-cut and down-cut) milling. By taking into
Considerationthe geometrical elements of machined surface and results
ofprevious experiments, the optimization of speed and feedrate atmachining
of Č4730 is done.
Keywords: slab milling, cutting data, optimization
- Type of paper
: Paper in proceedings
Title: Postprocesors at Programming of Numerically Controlled
Machine Tools
- Authors:
- Udiljak, Toma (90974)
Proceedings title: SUVREMENI TRENDOVI PROIZVODNOG STROJARSTVA
Place: Zagreb
Year: 1992
Pages: from 97 to 105
Meeting: Savjetovanje proizvodnog strojarstva
Held: from 05/09/92 to 05/09/92
Summary: This work deals with postprocesors at automatic programminh
ofnumerically controlled machine tools. It analyses the
influencingparameters, presents basic structure and design
possibilities,and gives the comparation of postprocesors considering
place,design procedure and application.
Keywords: NC machine tools, processors, postprocessors
- Type of paper
: Paper in proceedings
Title: Influence of Grinding Wheel cutting Surface Diameter on
Roughness of Grinding Surface in Internal Grinding
- Authors:
- Ciglar, Damir (121120)
Proceedings title: CIM'93
Place: Zagreb
Year: 1993
Pages: from 1 to 8
Meeting: Drugo međunarodno savjetovanje proizvodnog strojarstva CIM 93
Held: from 11/18/93 to 11/18/93
Summary: Ratio between grinding wheel surface diameter and work
surface
diameter Db / Do is one of the grinding parameter in internal
grinding proces. Literature recommend values for choosing ratio
Db / Do but range is too much wide. These article deals with the
influence of ratio Db / Do to roughness of grinding surface, to
investigate possibility of its optimization.
Keywords: internal grinding, ratio Db / Do, roughness of ground surface
- Type of paper
: Paper in proceedings
Title: Influence of the Grinding Wheel Contact Length on Grinding
Wheel Cutting Surface and Roughness of Grinding Surface
- Authors:
- Cebalo, Roko (59430)
- Ciglar, Damir (121120)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Place: Zagreb
Year: 1992
Pages: from 31 to 38
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/09/92 to 05/09/92
Summary: The important factor for grinding process is magnitude of
spaceon grinding wheel cutting surface needed to store the removedchips.
The bigger grinding contact length, the bigger space forremoved chips is
needed, or it is necessary to grind with reducedequivalent grinding
thickness. These article deals with problemof achieving the higher reduced
material removal rate at internalperipheral round grinding.
Keywords: grinding wheel contact length, equivalent grinding thichness, grinding wheel cutting surface
- Type of paper
: Paper in proceedings
Title: On Methods of Tool Life Testing and Tool Monitoring
- Authors:
- Udiljak, Toma (90974)
Proceedings title: CIM'93
Place: Zagreb
Year: 1993
Pages: from 87 to 94
Meeting: Savjetovanje proizvodnog strojarstva
Held: from 11/18/93 to 11/18/93
Summary: Considering growing number of workpiece materials, tool
materialsand tool geometry, the significance of reliable, fast
andeconomically feasible procedures for testing of tool life isbecoming
more important. Application of flexible manufacturingsystems and adaptive
control requires a reliable mathematicalmodels describing dependency
between measured values and toolcondition. This paper gives an short
overview on causes andeffects of tool wear, and overview of methods for
tool lifetesting and tool monitoring. It gives a description of procedure
which hypothesis is that part of tool wear could be substitutedby grinding,
what would enable faster and economically feasibleway to get data on tool
life and influence of tool wear oncutting forces and other cutting values.
Keywords: tool life, tool wear, tool monitoring, cutting forces
- Type of paper
: Paper in proceedings
Title: Retrospection of Poduction Engineering
- Authors:
- Cebalo, Roko (59430)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Place: Zagreb
Year: 1992
Pages: from 7 to 16
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/09/92 to 05/09/92
Summary: Work conditions which are in production engineering like in
othercases very important, should be significantly improved to ahigher
stage. In this case we can obtain creativity of allparticipators in
manufacturing process. That results in greaterprofit which gives high grade
stnadard of living. Introduction ofmodern technology and specialy
introduction of flexiblemanufacturing sistems may be of greatly help for
that.
Keywords: work conditions, standard of living, manufacture, flexibility, technology
- Type of paper
: Paper in proceedings
Title: Influence of Grinding Factors on Roughness Ground Surface
- Authors:
- Cebalo, Roko (59430)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Place: Zagreb
Year: 1992
Pages: from 13 to 20
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/09/92 to 05/09/92
Summary: Because grinding factors have significant influence on
roughnessof ground surface, there exists necessity to determine
theregularity of the influenced factors. In grinding process,roughness of
grining whell cutting surface has decisive role inachievement of roughness
ground surface, because of that, inadvance the number of static cutters
edges is tested. Dressing ofgrinding wheel cutting surface was performed
with a single pointdiamond with different speeds. By processing of
experimentalresults obtained at straight peripheral grinding of nickel
alloyNIMONIC 80A, the mathematical model is obtained which follow
theexperimental results with considerable probability.
Keywords: grinding, roughness of ground surface, single point diamond
- Type of paper
: Paper in proceedings
Title: Tool Life and Surface Quality of Drilling by
Fibre-reinforced Materials
- Authors:
- Cebalo, Roko (59430)
- Ivančić, Ivan (94855)
Proceedings title: uvremeni trendovi proizvodnog strojarstva
Place: Zagreb
Year: 1992
Pages: from 21 to 30
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/09/92 to 05/09/92
Summary: With the growing use of composite materials, there is also
anincrease in interest for suitable machining possibilities.Machining of
fiber strengthened plasics require tool materialswith higher wear
resistance. The basic investigations which arelied out in this paper are
describing application of differentcutting tool materials, considering
surface quality, cuttingforces and cutting temperature.
Keywords: drilling, fibre reinforced materials, tool life, surface quality.
- Type of paper
: Paper in proceedings
Title: Identification of Materials and Automaticaly Determing of
Cutting Data for Turning
- Authors:
- Cebalo, Roko (59430)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva II
Place: Zagreb
Year: 1992
Pages: from 1 to 14
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/09/92 to 05/09/92
Summary: There are many influencing factors and their interactions
incutting process. These factors can be only partialy identified.If
significant influence factors are selected with the evidenceof experiments,
it is possible to describe mathematically theflow process more than 90%
probability. Consideringdifferent materials status, it is impossible to
optimizecuuting process without experiment. In this paper is suggested anew
method which can be used to signalize the main specificcutting force to
activate data base and automatically chooseparameters of cutting elements,
considering the actual conditionof mechanical properties of materials.
Keywords: material, machinability, elements of cutt, turning
- Type of paper
: Paper in proceedings
Title: New Philosophy od Production Engineering
- Authors:
- Cebalo, Roko (59430)
- Škorić, Stephan (171410)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva II
Place: Zagreb
Year: 1992
Pages: from 1 to 14
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/09/92 to 05/09/92
Summary: Modern production system leaves more and more skillful
meaning
of technology and production by which its logistic was in the
hands of skilled workers in technology, quality and production
system. Modern philosophy of mechanical engineering, specially
production engineering is based on inviolable functionality and
on technology which begins on concepts. i.e. projects, even
before design. Thus formation of workpiece depends on technology
with which will be manufactured and assembled. Specially this is
important in flexible manufacturing system and in factory of the
future. In the future circumstances every solution and
responsibility lies in technology and program bureau. By
exploiting CAD/CAM integrates design with technology and all
works in computer integrated manufacturing.
Keywords: Philosophy, Production, CIM
- Type of paper
: Paper in proceedings
Title: Some of the Economical Solutions for Construction Primary
Drives of Machine Tools
- Authors:
- Motika, Romano (32503)
- Ciglar, Damir (121120)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Place: Zagreb
Year: 1992
Pages: from 9 to 20
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/09/92 to 05/09/92
Summary: To achive qualitative and economical chip removal process,
excepttool, material and information of the process, it is inportant
toinsure energy and adequate alternative motion (primary andauxiliary),
which can be achieved with special drives constitutetfrom electromotor (AC
or DC) and mainly added mechanical speedchanging mechanism. Some of
economical construction in dependenceof control, construction and type of
production a machine tool isused for, are shown in this work.
Keywords: machine tool, primary motion drive, economical construction
- Type of paper
: Paper in proceedings
Title: General Mathematical Expression of Some Transmission
Gearbox's Values for Optimization Pourposes
- Authors:
- Motika, Romano (32503)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Place: Zagreb
Year: 1992
Pages: from 171 to 184
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/09/92 to 05/09/92
Summary: To optain more simple optimization of the transmition
gearboxsome its numerical values are presented with general
mathematicalexpression depending of the parameters of gradual
steppedvariation, structure of transmission gearbox and loading capacity.
The level of their dependence of the mentioned parameters isgiven by
exponents presented in the form of tables.
Keywords: transmission gearbox, optimization, general mathematical expression
- Type of paper
: Paper in proceedings
Title: Machinability of Hard Materials with Coated Carbide Tools
- Authors:
- Yeshitila, Wuhib (134984)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Place: Zagreb
Year: 1992
Pages: from 123 to 130
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/09/92 to 05/09/92
Summary: This paper presents the research and determination of the
machinability of hard materials with a coated carbide tools.
The performance of tool life and surface roughness has been
evaluated by turning material Č. 4732 (45 HRC) with coated
carbide tools. To obtain statistically significant results and
to estimate factor effects and interactions, a four-factor two
level experiment was applied. Experimental result is treated
with regression analysis and confirmed with equation of
mathematical model, which shows dependency of tool life and
surface roughness on cutting speed (vc), feed (f), depth of
cut (ap) and tool nose radius (r). Machining steels in their
hardened condition is thus both tehnologically and
economically feasible.
Keywords: macinability, hard materials, mathematical model, tool life, surface roughness
- Type of paper
: Paper in proceedings
Title: Influence of Cutting Data and Tool Geometry on
Machinability of Materials
- Authors:
- Yeshitila, Wuhib (134984)
Proceedings title: BIAM'92
Place: Zagreb
Year: 1992
ISBN/ISSN: 86-81571-12-5
Pages: from 11 to 16
Meeting: XI. međunarodno savjetovanje BIAM '92
Held: from 06/16/92 to 06/17/92
Summary: This work deals with the influence of cutting data and tool
geometry on tool wear. Experimental research is performed by
machining quenched and tempered material using carbide tools.
The obtained result is treated with regression analysis and
the adequacy of mathematical model was confermed. Fanally, it
is shown corelation between experimental and calculated
results.
Keywords: cutting data, tool geometry, machinability of materials, tool wear
- Type of paper
: Paper in proceedings
Title: Roughness of Grinding Surface in Internal Peripheral
Grinding
- Authors:
- Ciglar, Damir (121120)
Proceedings title: BIAM'92 II
Place: Zagreb
Year: 1992
ISBN/ISSN: 86-81571-12-5
Pages: from 33 to 37
Meeting: XI. međunarodno savjetovanje BIAM '92
Held: from 06/16/92 to 06/17/92
Summary: Internal round peripheral grinding is a process in which
grindingwheel and workpeace have concave contact. It means that,comparing
with other peripheral grinding processes and with thesame conditions,
internal round peripheral grinding has thebiggest grinding wheel contact
length. These article deals withthe problem of influence of grinding wheel
contact length onroughness of grinding surface in internal round
peripheralgrinding with constant equivalent grinding thickness.
Keywords: internal peripheral grinding, grinding wheel contact length, roughness of ground surface
- Type of paper
: Paper in proceedings
Title: Programming Languages for Simulation of Flexible
Manufacturing Systems
- Authors:
- Ištef, Igor (186431)
- Udiljak, Toma (90974)
- Radić, Goran
Proceedings title: BIAM'92 II
Place: Zagreb
Year: 1992
ISBN/ISSN: 86-81571-12-5
Pages: from 49 to 54
Meeting: XI. međunarodno savjetovanje BIAM '92
Held: from 06/16/92 to 06/17/92
Summary: Analysis of Flexible Manufacturing Systems is more and more
(almost exclusively) carried out with simulation models of
observed system. But selection of programming language for design
of simulation model can vary because of more factors: from the
availability of input data to the desired degree of details in
modeling of particular system. Beside, selection depends on
application of simulation model: is it used in design phase for
new FMS, or in simulating of existing FMS. This article presents
an brief review on application of simulation models and basic
directions for selection of simulation language.
Keywords: simulation model, simulation language, flexible manufacturing system
- Type of paper
: Paper in proceedings
Title: Turn-milling
- Authors:
- Škorić, Stephan (171410)
- Udiljak, Toma (90974)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Place: Zagreb
Year: 1992
Pages: from 147 to 156
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/09/92 to 05/09/92
Summary: Optimization of cutting parameters sometimes, because
ofdimensions, shape and material, is not possiable to obtain.Because of
that, in some operations, it si advisable to apply aturn-milling.
Keywords: turn-milling, chip, machine tool
- Type of paper
: Paper in proceedings
Title: Teoretical Surface Roughness at Orthogonal Turn-milling
- Authors:
- Škorić, Stephan (171410)
Proceedings title: BIAM'92
Place: Zagreb
Year: 1992
ISBN/ISSN: 86-81571-12-5
Pages: from 14 to 20
Meeting: XI. međunarodno savjetovanje BIAM '92
Held: from 06/16/92 to 06/17/92
Summary: Turn-milling process does not give ideal circular,
i.e.cylindrical shape, but it leaves polygon section with bigger orsmaller
theoretical bulge (convexity), which formes theoreticalsurface roughness.
In different from turn-milling process withparallel shafts, orthogonal
turn-milling process are of newerdate and their theoretical surface
roughness is not sufficientlyresearched. This work presents the results of
researchedtheoretical surface roughness at orthogonal turn-milling.
- Type of paper
: Paper in proceedings
Title: Implementation the Graphic Monitoring and Controling
System at the Flexible Manufacturing System
- Authors:
- Ištef, Igor (186431)
Proceedings title: Savjetovanje proizvodnog strojarstva
Place: Zagreb
Year: 1992
Pages: from 39 to 47
Meeting: Savjetovanje proizvodnog strojarstva
Held: from 05/09/92 to 05/09/92
Summary: A modern graphical workstation for monitoring and
controllingcould be used for various industrial processes and among
themvery efficienty for Flexibile Manufacturing Systems. Theadvantages of
such application are easy to use and user orientedmonitoring over the FMS.
In addition, it release the maincomputer of working with graphical images
what enables betterefficiency in controling of FMS.
Keywords: graphical workstation, main computer,
- Type of paper
: Paper in proceedings
Title: Application of Flexible Automation in Machining of Electro
Motor Casing
- Authors:
- Cebalo, Roko (59430)
Proceedings title: 25th CIRP International Seminar on Manufacturing Systems
Language: engleski
Place: Bled, Slovenija
Year: 1993
Pages: from 213 to 220
Meeting: 25th CIRP International Seminar on Manufacturing Systems
Held: from 04/22/93 to 04/23/93
Summary: This work describes the procedure for designing of
flexible
manufacturing system for machining of electric motor casings. The
procedure has been applied at the factory "Mali elektriţni
strojevi" ("MES") in the Holding-factory "Rade Konţar". Firstpart of paper
encompass the analysis of workpieces. Analysis is
restricted on the workpieces with predominant share of metal
cutting operations. The electric motor casings of series 4 AZ (in
sizes 132, 160 and 180 and all subtypes) were selected as themost
significant. By applying the method of analysis ofworkpieces, detailed
recording of present state has been done.The data for the years 1991. and
1992. are used as the basis foranalysis and capacity planing.
The analysis of workpieces were a base for rough concept of
FMS. Considering a large number of possibilities for buildingFMS, the
simulation model were constructed. The simulation ismade on DEC Station
3100 by using SIMSCRIPT II.5 and selfdeveloped software. The results of
simulation enabling theoptimization the FMS in sense of number of machine
tools, palletsand sequencing of workpieces.
Keywords: flexible manufacturing systems, metal cutting, simulation
- Type of paper
: Paper in proceedings
Title: Significancy of Chip Space on Grinding Wheel Cutting
Surface
- Authors:
- Cebalo, Roko (59430)
Proceedings title: CIM'93
Place: Zagreb
Year: 1993
Pages: from 9 to 17
Meeting: Drugo međunarodno savjetovanje proizvodnog strojarstva CIM 93
Held: from 11/18/93 to 11/18/93
Summary: Chip space on grinding wheel cutting surface has
significant rolein grinding process. The achievable productivity, i. e.
reducedmaterial removal rate and the grinded surface quality depens onsize
of this space and its viability. Grinded surface quality isdecisive in
choise of the grinding wheel, condition of grindingand dressing of the
grinding wheel, specially in grinding partanticipated to work in condition
of dinamical load.
Keywords: grinding wheel cutting surface, chip space, grinding
- Type of paper
: Paper in proceedings
Title: The Optimization of Inlet Parameters in Electro-chemical
Machining (of the Compressor Gas Turbine Blade Airfoil)
- Authors:
- Cebalo, Roko (59430)
- Ivanišević, Robert
Proceedings title: CIM'93
Place: Zagreb
Year: 1993
Pages: from 19 to 31
Meeting: Drugo međunarodno savjetovanje proizvodnog strojarstva CIM 93
Held: from 11/18/93 to 11/18/93
Summary: By electro-chemical Machining, compressor gas turbin
bladeairfoil was machined from full prism shape sample followed
byresearching the influence of independed parameters upon machinigresults
in relation to approved surface roughness values anddeviations from defined
profile for critical section. Theanalisys of results was made according to
test plan and availableresults are for martensit steel with defined
structure.
Keywords: average aritmetical roughnesss of surface, roughness depth, deviation from defined blade profile
- Type of paper
: Paper in proceedings
Title: Efficiency Optimization at Wood Machining by Milling
- Authors:
- Cebalo, Roko (59430)
- Risović, Stjepan
- Goglia, V
Proceedings title: CIM'93
Place: Zagreb
Year: 1993
Pages: from 33 to 43
Meeting: Drugo međunarodno savjetovanje proizvodnog strojarstva CIM 93
Held: from 11/18/93 to 11/18/93
Summary: The paper deals with the optimization procedure of
thetechnological process of wood machining by milling. Only thefactors
having influence during the effective time (from
thetechnically-technological viewpoint) have been considered here.The goal
function has been examined with regard to the existingrestrictions.
Keywords: wood machining, milling, optimization, efficiency
- Type of paper
: Paper in proceedings
Title: Determination the Number of Palettes and the Minimum
Passing Time through the FMS by the Simulation
- Authors:
- Cebalo, Roko (59430)
- Ištef, Igor (186431)
Proceedings title: CIM'93
Place: Zagreb
Year: 1993
Pages: from 25 to 34
Meeting: Drugo međunarodno savjetovanje proizvodnog strojarstva CIM 93
Held: from 11/18/93 to 11/18/93
Summary: Simulation of FMS begin from the basic idea of its
configurationwhich is derived from the manufacturing plan. But, many
timesbasic assumption from the basic model are not realistic which canbe
seen from the preliminary model. After that we must createmore realistic
model, derived from results of preliminary model.
Keywords: simulation, model, time
- Type of paper
: Paper in proceedings
Title: 5-axis milling; Theory and Application
- Authors:
- Cebalo, Roko (59430)
- Ištef, Igor (186431)
Proceedings title: CIM'93
Place: Zagreb
Year: 1993
Pages: from 69 to 76
Meeting: Drugo međunarodno savjetovanje proizvodnog strojarstva CIM 93
Held: from 11/18/93 to 11/18/93
Summary: There are many ways of application 5-axis milling, but
because ofits expensive and many difficults in implementation ithas
constrains in application. Some of properties of 5-axismilling is
presenting in this paper.
Keywords: 5-axis milling, tool location, part sculptured surfaces, programming,
- Type of paper
: Paper in proceedings
Title: Computer's Optimization of Some Transmission Gearbox's
Magnitudes of Machine Tools
- Authors:
- Motika, Romano (32503)
Proceedings title: CIM'93
Place: Zagreb
Year: 1993
Pages: from 111 to 120
Meeting: Drugo međunarodno savjetovanje proizvodnog strojarstva CIM 93
Held: from 11/18/93 to 11/18/93
Summary: The work shows the computer's optimization of some
geometrical,mass and kinetial magnitudes of gearbox on the basis of
thegeneral mathematical expression, in which the mentionedmagnitudes are
presented with the parameters of gradual steppedvariation, structure of
gearbox and loading capacity of gearpair.
Keywords: machine tool, gearbox, optimization, computer
- Type of paper
: Paper in proceedings
Title: Effect of Cutting Data on Surface Roughness
- Authors:
- Yeshitila, Wuhib (134984)
Proceedings title: CIM'93
Place: Zagreb
Year: 1993
Pages: from 95 to 102
Meeting: Drugo međunarodno savjetovanje proizvodnog strojarstva CIM 93
Held: from 11/18/93 to 11/18/93
Summary: This work deals with the effect of cutting data on
surface roughness. Experimental research is performed by
machining material Č5432 (220 HB) using carbide tools. The
obtained result is treated with regression analysis and the
adequacy of mathematical model was confermed. Finally, it is
shown corelation between experimental and calculated results,
and influence of particular cutting data on surface roughness.
Keywords: machinability, surface roughness, turning, carbide tools, cutting data
- Type of paper
: Paper in proceedings
Title: Theoretical influencing faktors on the geometry of the
machined surface at the orthogonal turn-milling
- Authors:
- Škorić, Stephan (171410)
Proceedings title: CIM'93
Place: Zagreb
Year: 1993
Pages: from 79 to 86
Meeting: Drugo međunarodno savjetovanje proizvodnog strojarstva CIM 93
Held: from 11/18/93 to 11/18/93
Summary: Turn-milling process does not give ideal circular,
i.e.cylindrical shape, but it leaves polygon section with bigger orsmaller
theoretical uneveness. In different from turn-millingprocess with parallel
shafts, orthogonal turn-milling process isnot sufficiently researched. This
work presents the result oftheoretical influencing factors on the geometry
of the machinedsurface ( theoretical surface roughness) at the
orthogonalturn-milling.
Keywords: turn-milling, polygon section, theoretical surface roughnes
- Type of paper
: Paper in proceedings
Title: Maintenance of Flexible Manufacturing Systems
- Authors:
- Ivančić, Ivan (94855)
Proceedings title: CIM'93
Place: Zagreb
Year: 1993
Pages: from 121 to 128
Meeting: Drugo međunarodno savjetovanje proizvodnog strojarstva CIM 93
Held: from 11/18/93 to 11/18/93
Summary: Contemporary market is characterized by smaller batch size
andincreasing number of product variants. It demands a manufacturingsystems
with high degree of flexibility. With automation ofmachine tools, the
complex manufacturing equipment has beendeveloped which enables a high
productivity and high flexibilityat the same time. The complexity of
manufacturing system have anegative influence on their availability which
need to beimproved because of: introduction of production-shift
"withoutdirect human labor", JIT production, realization, of
shorterdelivery times and a guaranty of high production efficiency.
Themaintenance tasks starts with planing of manufacturing system andends
with ultimate retirement of manufacturing system.
Keywords: maintenance, availability, maintainability, reliability
- Type of paper
: Paper in proceedings
Title: Maintenance become Task of the Management
- Authors:
- Ivančić, Ivan (94855)
Proceedings title: Održavanje industrijske opreme 90/91
Place: Osijek
Year: 1992
Pages: from 95 to 102
Keywords: maintanance, expence, norm, education
- Type of paper
: Paper in proceedings
Title: Negotiation and taking over work systems at the view point
of maintenance
- Authors:
- Ivančić, Ivan (94855)
Proceedings title: Održavanje industrijske opreme '92.
Place: Osijek
Year: 1992
Pages: from 16 to 21
Keywords: negotiation, taking over, work systems, maintenance
- Type of paper
: Paper in proceedings
Title: Planing, Following up and Corrective action in Maintenance
- Authors:
- Ivančić, Ivan (94855)
Proceedings title: Održavanje industrijske opreme '93
Place: Osijek
Year: 1993
ISBN/ISSN: 953-6032-06-6
Pages: from 63 to 76
Keywords: planned maintenance, corrective action, purpose of maintenance
- Type of paper
: Paper in proceedings
Title: Maintenance Strategy in the company of "Nikola Tesla"
- Authors:
- Ivančić, Ivan (94855)
Proceedings title: Suvremeni elektromotorni pogoni i suvremena strategija održavanja
Place: Zagreb
Year: 1993
Pages: from 17 to 25
Held: from 11/19/93 to 11/19/93
Keywords: strategy, maintenance, work system
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Jerbić, Bojan (121164)
- Vranješ, Božo (53161)
- Kunica, Zoran (162390)
- Editors
- Adey, Robert
- Rzevski, George
Proceedings title: AIENG 91, Computational Mechanics Institute & Elsevier Applied Sciences
Place: Southampton, UK
Year: 1991
Pages: from 125 to 141
Meeting: Applications of Artificial Intelligence in Engineering 6 (AIENG 91)
Held: from 07/02/91 to 07/04/91
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Kunica, Zoran (162390)
- Vranješ, Božo (53161)
- Jerbić, Bojan (121164)
Proceedings title: ICCIM 91, World Scientific Publishing
Place: Singapore, Singapore
Year: 1991
Pages: from 349 to 352
Meeting: 1st International Conference on Computer Integrated Manufacturing (ICCIM 91) - Manufacturing Enterprises of the 21st Century
Held: from 10/02/91 to 10/04/91
- Type of paper
: Paper in proceedings
Title: PERSPECTIVES OF ASSEMBLY DEVELOPMENT
- Authors:
- Vranješ, Božo (53161)
- Editors
- Srb, Neven
Proceedings title: Zbornik radova SONT 91
Place: Opatija
Year: 1991
Pages: from 15 to 18
Meeting: 3. međunarodni simpozij o novim tehnologijama SONT 91
Held: from 10/15/91 to 10/17/91
- Type of paper
: Paper in proceedings
Title: POSSIBILITY OF APPLICATION OF DFA IN ELECTRONIC INDUSTRY
- Authors:
- Lisičar, Josip (52193)
- Editors
- Srb, Neven
Proceedings title: SONT 91
Place: Opatija
Year: 1991
Pages: from 58 to 61
Meeting: 3. međunarodni simpozij o novim tehnologijama SONT 91
Held: from 10/15/91 to 10/17/91
- Type of paper
: Paper in proceedings
Title: CONTRIBUTION TO AUTOMATED ASSEMBLY SYSTEM PLANNING USING
SIMULATION
- Authors:
- Kunica, Zoran (162390)
- Editors
- Srb, Neven
Proceedings title: Zbornik SONT 91
Place: Opatija
Year: 1991
Pages: from 55 to 57
Meeting: 3. međunarodni simpozij o novim tehnologijama SONT 91
Held: from 10/15/91 to 10/17/91
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Kunica, Zoran (162390)
- Vranješ, Božo (53161)
- Jerbić, Bojan (121164)
- Editors
- Liebowitz, Jay
Proceedings title: WCES 91, Pergamon Press
Place: New York, USA
Year: 1991
Pages: from 2067 to 2074
Meeting: The World Congress on Expert Systems
Held: from 12/16/91 to 12/19/91
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Jerbić, Bojan (121164)
- Vranješ, Božo (53161)
- Kunica, Zoran (162390)
- Editors
- Liebowitz, Jay
Proceedings title: WCES 91, Pergamon Press
Place: New York, USA
Year: 1991
Pages: from 2038 to 2046
Meeting: The World Congress on Expert Systems
Held: from 12/16/91 to 12/19/91
- Type of paper
: Paper in proceedings
Title: INTEGRATED AUTOMATED ASSEMBLY SYSTEM PLANNING
- Authors:
- Vranješ, Božo (53161)
- Jerbić, Bojan (121164)
- Kunica, Zoran (162390)
- Editors
- Cebalo, Roko (59430)
Proceedings title: Zbornik radova Suvremeni trendovi proizv. strojarstva
Place: Zagreb
Year: 1992
Pages: from 57 to 63
Meeting: Savjetovanje Suvremeni trendovi proizvodnog strojarstva, Zagreb, 1992
Held: from 05/08/92 to 05/08/92
- Type of paper
: Paper in proceedings
Title: APPROACH TO THE CHOICE OF PRODUCT DESIGN RULES FOR
AUTOMATIC ASSEMBLY
- Authors:
- Lisičar, Josip (52193)
- Editors
- Cebalo, Roko (59430)
Proceedings title: Zbornik Suvremeni trendovi proizvodnog strojarstva
Place: Zagreb
Year: 1992
Pages: from 1 to 7
Meeting: Savjetovanje Suvremeni trendovi proizvodnog strojarstva, Zagreb, 1992
Held: from 05/08/92 to 05/08/92
- Type of paper
: Paper in proceedings
Title: ROBOT CONTROL ALGORITHM IN SPACE OF EXTERNAL COORDINATES
- Authors:
- Crneković, Mladen
- Vrtodušić, Dražen
- Editors
- Cebalo, Roko (59430)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Place: Zagreb
Year: 1992
Pages: from 135 to 142
Meeting: Savjetovanje Suvremeni trendovi proizvodnog strojarstva, Zagreb, 1992
Held: from 05/08/92 to 05/08/92
- Type of paper
: Paper in proceedings
Title: DIDACTIC FLEXIBLE ASSEMBLY SYSTEM
- Authors:
- Nikolić, Gojko
- Vranješ, Božo (53161)
- Editors
- Šurina, Tugomir (48562)
Proceedings title: BIAM 92
Place: Zagreb
Year: 1992
Pages: from 1 to 6
Meeting: 11. međunarodno savjetovanje BIAM 92
Held: from 06/16/92 to 06/17/92
- Type of paper
: Paper in proceedings
Title: ANALYSIS OF CAD MODEL TOPOLOGY
- Authors:
- Jerbić, Bojan (121164)
- Editors
- Šurina, Tugomir (48562)
Proceedings title: BIAM 92
Place: Zagreb
Year: 1992
Pages: from 7 to 14
Meeting: 11. međunarodno savjetovanje BIAM 92
Held: from 06/16/92 to 06/17/92
- Type of paper
: Paper in proceedings
Title: SYSTEM FOR PLAN GENERATING OF AUTOMATIC ASSEMBLY
- Authors:
- Kunica, Zoran (162390)
- Editors
- Šurina, Tugomir (48562)
Proceedings title: BIAM 92
Place: Zagreb
Year: 1992
Pages: from 15 to 20
Meeting: 11. međunarodno savjetovanje BIAM 92
Held: from 06/16/92 to 06/17/92
- Type of paper
: Paper in proceedings
Title: ESTIMATING THE NATURAL ORIENTATION OF PART FOR AUTOMATIC
ASSEMBLY WITH ENERGY METHOD
- Authors:
- Vrtodušić, Dražen
- Editors
- Šurina, Tugomir (48562)
Proceedings title: BIAM 92
Place: Zagreb
Year: 1992
Pages: from 21 to 26
Meeting: 11. međunarodno savjetovanje BIAM 92
Held: from 06/16/92 to 06/17/92
- Type of paper
: Paper in proceedings
Title: CAD INTEGRATION IN MANUFACTURING SYSTEM PLANNING
- Authors:
- Vranješ, Božo (53161)
- Jerbić, Bojan (121164)
- Kunica, Zoran (162390)
- Gregurić, Goran
- Editors
- Cebalo, Roko (59430)
Proceedings title: CIM 93, Svezak 2
Place: Zagreb
Year: 1993
Pages: from 9 to 16
Meeting: Drugo međunarodno savjetovanje proizvodnog strojarstva CIM 93
Held: from 11/18/93 to 11/18/93
- Type of paper
: Paper in proceedings
Title: SITUATION IN THE FIELDS OF ROBOTICS AND ASSEMBLY
AUTOMATION
- Authors:
- Novaković, Branko
- Vranješ, Božo (53161)
- Editors
- Cebalo, Roko (59430)
Proceedings title: CIM 93, Svezak 1
Place: Zagreb
Year: 1993
Pages: from 1 to 13
Meeting: Drugo međunarodno savjetovanje proizvodnog strojarstva CIM 93
Held: from 11/18/93 to 11/18/93
- Type of paper
: Paper in proceedings
Title: APPLICATION OF THE SYSTEM FOR AUTOMATIC ASSEMBLY PROCESS
PLANNING
- Authors:
- Vranješ, Božo (53161)
- Jerbić, Bojan (121164)
- Kunica, Zoran (162390)
- Editors
- Cebalo, Roko (59430)
Proceedings title: CIM 93, Svezak 2
Place: Zagreb
Year: 1993
Pages: from 57 to 66
Meeting: Drugo međunarodno savjetovanje proizvodnog strojarstva CIM 93
Held: from 11/18/93 to 11/18/93
- Type of paper
: Paper in proceedings
Title: POSSIBILITY OF INTEGRATED DESIGNING OF PARTS AND THEIR
ORDERING DEVICES
- Authors:
- Vrtodušić, Dražen
- Editors
- Cebalo, Roko (59430)
Proceedings title: CIM 93, Svezak 2
Place: Zagreb
Year: 1993
Pages: from 67 to 74
Meeting: Drugo međunarodno savjetovanje proizvodnog strojarstva CIM 93
Held: from 11/18/93 to 11/18/93
- Type of paper
: Paper in proceedings
Title:
Proceedings title: AIENG 94 (u tisku)
Place: Southampton, UK
Year: 1993
Pages: from 0 to 0
Meeting: Applications of Artificial Intelligence in Engineering 9 (AIENG 94)
Held: from 07/19/94 to 07/21/94
- Type of paper
: Paper in proceedings
Title: VIBRATORY BOWL FEEDER ANALYSIS AND NUMERICAL CALCULUS
- Authors:
- Zubović, Dražen
- Editors
- Srb, Neven
Proceedings title: SONT 91
Place: Opatija
Year: 1991
Pages: from 88 to 92
Meeting: 3. međunarodni simpozij o novim tehnologijama SONT 91
Held: from 10/15/91 to 10/17/91
- Type of paper
: Paper in proceedings
Title: QUALITY CIRCLES AS ONE OF NEW TECHNOLOGIES
- Authors:
- Mikšić, Dragutin (57176)
Proceedings title: Zbornik radova Memorijal Aleksandar Đurašević
Place: Karlovac
Year: 1991
Pages: from 19 to 30
Held: from 05/22/91 to 05/24/91
- Type of paper
: Paper in proceedings
Title: ORGANISATION OF WORK IN THE INTEGRATED PRODUCTION
- Authors:
- Mikšić, Dragutin (57176)
Proceedings title: Suvremeni trendovi strojarstva I
Place: Zagreb
Year: 1992
Pages: from 41 to 55
Meeting: Suvremeni trendovi strojarstva
Held: from 05/01/92 to 05/01/92
- Type of paper
: Paper in proceedings
Title: DISCUSSIONS SUPPLEMENT TO THEME: "ORGANISATION OF WORK IN
THE INTEGRATED PRODUCTION
- Authors:
- Mikšić, Dragutin (57176)
Proceedings title: Suvremeni trendovi strojarstva II
Place: Zagreb
Year: 1992
Pages: from 23 to 28
Meeting: Suvremeni trendovi strojarstva
Held: from 05/01/92 to 05/01/92
- Type of paper
: Paper in proceedings
Title: SOCIAL ECOLOGY AND ORGANISATION
- Authors:
- Dubreta, Nikša (172332)
Proceedings title: Suvremeni trendovi strojarstva I
Place: Zagreb
Year: 1992
Pages: from 77 to 83
Meeting: Suvremeni trendovi strojarstva
Held: from 05/01/92 to 05/01/92
- Type of paper
: Paper in proceedings
Title: TECHNOLOGY AND VALUES
- Authors:
- Mikšić, Dragutin (57176)
Proceedings title: CIM 93
Place: Zagreb
Year: 1993
Pages: from 25 to 31
Meeting: Drugo međunarodno savjetovanje proizvodnog strojarstva CIM 93
Held: from 11/18/93 to 11/18/93
- Type of paper
: Paper in proceedings
Title: THE DIMENSIONS OF ECOLOGICAL CONSCIONSNESS OF STUDENT AND
EMPLOYERS
- Authors:
- Dubreta, Nikša (172332)
- Vukelić, Anton
Proceedings title: Zbornik radova Fakulteta strojarstva i brodogradnje Sveučilišta u Zagrebu
Place: Zagreb
Year: 1993
ISBN/ISSN: 0350-3097
Pages: from 257 to 267
- Type of paper
: Paper in proceedings
Title: Investigation of Carburising Effects on high Alloy Styeels
- Authors:
- Novosel, Mladen (57005)
Proceedings title: Znanstveno stručno savjetovanje "Toplinska obradba materijala"
Place: Zagreb
Year: 1992
Pages: from 47 to 54
Meeting: Znanstveno-stručno savjetovanje"Toplinska obradba materijala"
Held: from 06/17/92 to 06/18/22
- Type of paper
: Paper in proceedings
Title: EFFECT OF CARBURISATION OF HIGH-SPEED STEELS
- Authors:
- Cajner, Franjo (76181)
- Matijević, Božidar (171386)
- Oršanić, Želimir
- Editors
- Stupnišek, Mladen (76754)
Proceedings title: ZNANSTVENO-STRUČNO SAVJETOVANJE"TOPLINSKA OBRADBA MATERIJALA"
Place: Zagreb
Year: 1992
Pages: from 55 to 64
Meeting: Znanstveno-stručno savjetovanje"Toplinska obradba materijala"
Held: from 06/17/92 to 06/18/92
- Type of paper
: Paper in proceedings
Title: Mathematic Modelling of Thermo-Chemical Procesess of Steel
- Authors:
- Stupnišek, Mladen (76754)
Proceedings title: Znanstveno stručno savjetovanje"Toplinska obradba materijala"
Place: Zagreb
Year: 1992
Pages: from 75 to 84
Meeting: Znanstveno-stručno savjetovanje"Toplinska obradba materijala"
Held: from 06/17/92 to 06/18/92
- Type of paper
: Paper in proceedings
Title: Methods for determination of Boride layers thickness
- Authors:
- Matijević, Božidar (171386)
- Stupnišek, Mladen (76754)
- Cajner, Franjo (76181)
- Editors
- Bonačić-Mandinić, Zoran (4456)
- Cebalo, Roko (59430)
- Dusman, Federico
- Kralj, Slobodan
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Place: Zagreb
Year: 1992
Pages: from 53 to 62
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/09/92 to 05/09/92
- Type of paper
: Paper in proceedings
Title: D
- Authors:
- Novosel, Mladen (57005)
- Editors
- Esih, Ivan (11364)
Proceedings title: Zbirka referata
Place: Zagreb
Year: 1990
Pages: from 19 to 28
Meeting: 9. Savjetovanje o dostignućima i tendencijama razvoja na području zaštite materijala i industrijskog finiša
Held: from 06/13/90 to 06/15/90
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Novosel, Mladen (57005)
- Editors
- Filetin, Tomislav
- Ivušić, Vinko
- Franz, Mladen
- Ugarković, Mirjana
Proceedings title: Materijali u strojarstvu
Place: Zagreb
Year: 1992
Pages: from 9 to 24
Meeting: Znanstveno stručni kolokvij
Held: from 02/19/92 to 02/19/92
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Novosel, Mladen (57005)
- Editors
- Esih, Ivan (11364)
- Kunst, Melita (24686)
Proceedings title: Zbirka referata
Place: Zagreb
Year: 1992
Pages: from 75 to 87
Meeting: 10. savjetovanje o zaštiti materijala i industrijskom finišu
Held: from 06/18/92 to 06/19/92
- Type of paper
: Paper in proceedings
Title: PROTECTIVE AND DECORATIVE EFFECT OF ANODIZATION AND
ELECTROLYTIC OR CHEMICAL COLOURING OF ALUMINIUM
- Authors:
- Esih, Ivan (11364)
- Jurac, Zlatko
- Čavara, Luka
Proceedings title: Zbirka referata 10. savjetovanja o zaštiti materijala i industrijskom finišu
Place: Zagreb
Year: 1992
Pages: from 27 to 32
Meeting: 10. savjetovanje o zaštiti materijala i industrijskom finišu
Held: from 06/18/92 to 06/19/92
- Type of paper
: Paper in proceedings
Title: INFLUENCE OF WELDING ON CHEMICAL RESISTANCE OF AUSTENITIC
STEELS
- Authors:
- Karlušić, Bernard (186453)
- Jarić, Marija
- Derniković, Boris
Proceedings title: 10. Savjetovanje o zaštiti materijala i industrijskom finišu
Place: Zagreb
Year: 1992
Pages: from 51 to 58
Meeting: 10. savjetovanje o zaštiti materijala i industrijskom finišu
Held: from 06/18/92 to 06/19/92
- Type of paper
: Paper in proceedings
Title: DATA BANKS AND INFORMATION SYSTEMS IN CORROSIONS
ENGINEERING
- Authors:
- Žagar-Maričić, Alemka (55365)
- Matasić, Susanna (187136)
Proceedings title: 10. Savjetovanje o zaštiti materijala i industrijskom finišu
Place: Zagreb
Year: 1992
Pages: from 101 to 106
Meeting: 10. savjetovanje o zaštiti materijala i industrijskom finišu
Held: from 06/18/92 to 06/19/92
- Type of paper
: Paper in proceedings
Title: Proučavanje korozivnosti slane vode iz naftnog izvora
- Authors:
- Esih, Ivan (11364)
- Sorić, Tomslav
- Čabrajac, Stevo
Proceedings title: Europski kolokvij u kemijskim i parakemijskim tvornicama
Place: Lyon, Francuska
Year: 1991
Pages: from 1 to 6
Meeting: Europski kolokvij u kemijskim i parakemijskim tvornicama
Held: from 05/15/91 to 05/17/91
- Type of paper
: Paper in proceedings
Title: THE FMEA ANALYSIS OF SOLDERING RESISTANT VARNISH QUALTY ON
THE PRINTED CIRCUIT BOARDS
- Authors:
- Esih, Ivan (11364)
Proceedings title: 10. Savjetovanje o zaštiti materijala i industrijskom finišu
Place: Zagreb
Year: 1992
Pages: from 15 to 20
Meeting: 10. savjetovanje o zaštiti materijala i industrijskom finišu
Held: from 06/18/92 to 06/19/92
Other: Recenzija: Prof. dr. sc. Ivan Esih
- Type of paper
: Paper in proceedings
Title: ELABORATION OF STANDARDS DEALING WITH CORROSION PROTECTION
- Authors:
- Esih, Ivan (11364)
Proceedings title: Zbirka referata 10. savjetovanja o zaštiti materijala i industrijskom finišu
Place: Zagreb
Year: 1992
Pages: from 21 to 26
Meeting: 10. savjetovanje o zaštiti materijala i industrijskom finišu
Held: from 06/18/92 to 06/19/92
Other: Recenzija: Prof. dr. sc. Ivan Esih
- Type of paper
: Paper in proceedings
Title: NEW VIEWS IN GUIDE LINES FOR WORKINGS MEDIUM OF HIGH
PRESSURE STEAM GENERATORS
- Authors:
- Esih, Ivan (11364)
Proceedings title: Zbirka referata 10. savjetovanje o zaštiti materijala i industrijskom finišu
Place: Zagreb
Year: 1992
Pages: from 39 to 43
Meeting: 10. savjetovanje o zaštiti materijala i industrijskom finišu
Held: from 06/18/92 to 06/19/92
Other: Recenzija: Prof. dr. sc. Ivan Esih
- Type of paper
: Paper in proceedings
Title: USE OF AC IMPEDANCE MEASUREMENTS IN CORROSION
INVESTIGATIONS
- Authors:
- Esih, Ivan (11364)
Proceedings title: Zbirka referata 10. savjetovanja o zaštiti materijala i industrijskom finišu
Place: Zagreb
Year: 1992
Pages: from 45 to 50
Meeting: 10. savjetovanje o zaštiti materijala i industrijskom finišu
Held: from 06/18/92 to 06/19/92
Other: Recenzija: Prof. dr. sc. Ivan Esih
- Type of paper
: Paper in proceedings
Title: PROTECTION OF CORRODED STEEL BY INHIBITORS
- Authors:
- Esih, Ivan (11364)
Proceedings title: Zbirka referata 10. savjetovanja o zaštiti materijala i industrijskom finišu
Place: Zagreb
Year: 1992
Pages: from 59 to 63
Meeting: 10. savjetovanje o zaštiti materijala i industrijskom finišu
Held: from 06/18/92 to 06/19/92
Other: Recenzija: Prof. dr. sc. Ivan Esih
- Type of paper
: Paper in proceedings
Title: A SURVEY OF THE SCIENTIFIC PROJECT "EKO-ECO RATIONAL
DEVELOPMENT OF PRINTED CIRCUIT BOARDS TECHNOLOGIES"
- Authors:
- Esih, Ivan (11364)
Proceedings title: Zbirka referata 10. savjetovanja o zaštiti materijala i industrijskom finišu
Place: Zagreb
Year: 1992
Pages: from 65 to 68
Meeting: 10. savjetovanje o zaštiti materijala i industrijskom finišu
Held: from 06/18/92 to 06/19/92
Other: Recenzija: Prof. dr. sc. Ivan Esih
- Type of paper
: Paper in proceedings
Title: SOME ASPECTS OF DEVELOPMENT OF STEELS WITH IMPROVED
CORROSIONS PROPERTES FOR THE USE IN AGRESSIVE CONDITIONS
- Authors:
- Esih, Ivan (11364)
Proceedings title: Zbirka referata 10. savjetovanja o zaštiti materijala i industrijskom finišu
Place: Zagreb
Year: 1992
Pages: from 69 to 73
Meeting: 10. savjetovanje o zaštiti materijala i industrijskom finišu
Held: from 06/18/92 to 06/19/92
Other: Recenzija: Prof. dr. sc. Ivan Esih
- Type of paper
: Paper in proceedings
Title: SUPERFERRITIC STEELS
- Authors:
- Esih, Ivan (11364)
Proceedings title: Zbirka referata 10. savjetovanja o zaštiti materijala i industrijskom finišu
Place: Zagreb
Year: 1992
Pages: from 69 to 73
Meeting: 10. savjetovanje o zaštiti materijala i industrijskom finišu
Held: from 06/18/92 to 06/19/92
Other: Recenzija: Prof. dr. sc. Melita Kunst
- Type of paper
: Paper in proceedings
Title: ELECTROPLATED METAL COATINGS IN ELECTRONICS
- Authors:
- Esih, Ivan (11364)
Proceedings title: Zbirka referata 10. savjetovanja o zaštiti materijala i inustrijskom fnišu
Place: Zagreb
Year: 1992
Pages: from 89 to 94
Meeting: 10. savjetovanje o zaštiti materijala i industrijskom finišu
Held: from 06/18/92 to 06/19/92
Other: Recenzija: Prof. dr. sc. Melita Kunst
- Type of paper
: Paper in proceedings
Title: Systemic Approach to the Production of Polymeric Parts
- Authors:
- Čatić, Igor (7792)
- Editors
- Glavič, Peter
- Trajbarić, Štefan
- Musil, Vojko
Proceedings title: Zbornik referatov strokovnih obsejemskih prireditev, PLAGKEM '95
Place: Maribor, Slovenija
Year: 1995
Meeting: Strokovne obsejemske prireditve PLAGKEM '95
Held: from 04/19/95 to 04/22/95
- Type of paper
: Paper in proceedings
Title: Uklanjanje grešaka pri injekcijskom prešanju plastomera s
pomoću expertnog sustava
- Authors:
- Slavica, Mladen
- Šercer, Mladen (77160)
- Čatić, Igor (7792)
Place: Pula
Year: 1995
ISBN/ISSN: 1330-1012
Meeting: 17th International Conference ITI'95
Held: from 06/13/95 to 06/16/95
- Type of paper
: Paper in proceedings
Title: Expert System Aided Troubleshooting on Injection mouldings
- Authors:
- Slavica, Mladen
- Šercer, Mladen (77160)
- Čatić, Igor (7792)
Proceedings title: Zbornik radova KOI'95
Place: Rab, Hrvatska
Year: 1994
ISBN/ISSN: 953-96256-0-2
Pages: from 269 to 276
Meeting: 4. Konferencija iz operacijskih istraživanja
Held: from 10/04/94 to 10/06/94
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Čatić, Igor (7792)
Place: Zagreb
Year: 1994
Pages: from 18 to 20
Meeting: Ekološki podobna ambalaža
Held: from 05/17/94 to 05/18/94
- Type of paper
: Paper in proceedings
Title: Material and Spiritual Culture Connecting - the New Aim of
Technical Functioning
- Authors:
- Razi, Nada (152475)
- Čatić, Igor (7792)
- Editors
- Čatić, Igor (7792)
Proceedings title: 12. dani Društva plastičara i gumaraca
Place: Zagreb
Year: 1994
Pages: from 65 to 70
Meeting: 12. savjetovanje o proizvodnji, primjeni i preradbi plastike i gume
Held: from 06/21/94 to 06/24/94
- Type of paper
: Paper in proceedings
Title: Production of Polymer Composites
- Authors:
- Čatić, Igor (7792)
Proceedings title: Kompoziti - materijali današnjice i sutrašnjice
Place: Zagreb
Year: 1994
Pages: from 1 to 15
Meeting: Kompoziti - materijali današnjice i sutrašnjice
Held: from 09/26/94 to 09/27/94
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Čatić, Igor (7792)
Proceedings title: Aktivnosti mladeži u znanosti i tehnici
Place: Zagreb
Year: 1994
Pages: from 134 to 139
Meeting: Aktivnosti mladeži u znanosti i tehnici
Held: from 06/26/94 to 06/26/94
- Type of paper
: Paper in proceedings
Title: Quality Assurance in Cable Insulations Extrusion
- Authors:
- Rujnić-Sokele, Maja
- Brajković, Nives
- Čatić, Igor (7792)
- Editors
- Krstelj, Vjera
Proceedings title: Zbornik radova međunarodnog savjetovanja KBR u sustavu kvalitete
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-96225-0-6
Pages: from 375 to 381
Meeting: KBR u sustavu kvalitete
Held: from 06/16/94 to 06/17/94
- Type of paper
: Paper in proceedings
Title: Corrosion Protection of Systems for Supplying Consumers
with Warm Water
- Authors:
- Esih, Ivan (11364)
- Kolumbić, Zvonimir
- Editors
- Esih, Ivan (11364)
Proceedings title: Zbirka referata 11. savjetovanja o zaštiti materijala i industrijskom finišu
Place: Zagreb
Year: 1994
Pages: from 120 to 126
Meeting: 11. savjetovanje o zaštiti materijala i industrijskom finišu
Held: from 06/23/94 to 06/24/94
- Type of paper
: Paper in proceedings
Title: What is Medium Aggressivity?
- Authors:
- Esih, Ivan (11364)
- Editors
- Esih, Ivan (11364)
Proceedings title: Zbornik radova
Place: Slavonski Brod
Year: 1994
Pages: from 57 to 63
Meeting: Znanstveno-stručni skup in memoriam Anici Belić: Agresivnost medija i pouzdanost opreme
Held: from 10/06/94 to 10/06/94
- Type of paper
: Paper in proceedings
Title: Thermographic Testing of Protective Coatings
- Authors:
- Švaić, Srećko
- Žagar-Maričić, Alemka (55365)
- Editors
- Krstelj, Vjera
Proceedings title: Zbornik radova međunarodnog savjetovanja KBR u sustavu kvalitete
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-96225-0-6
Pages: from 307 to 313
Meeting: KBR u sustavu kvalitete
Held: from 06/16/94 to 06/17/94
- Type of paper
: Paper in proceedings
Title: Non-destructive Testing in Quality Assurance of Protective
Coatings
- Authors:
- Žagar-Maričić, Alemka (55365)
- Editors
- Krstelj, Vjera
Proceedings title: Zbornik radova međunarodnog savjetovanja KBR u sustavu kvalitete
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-96225-0-6
Pages: from 99 to 106
Meeting: KBR u sustavu kvalitete
Held: from 06/16/94 to 06/17/94
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Šercer, Mladen (77160)
- Slavica, Mladen
- Čatić, Igor (7792)
Proceedings title: Zbornik referata a anotaci z 5. mezinarodni konference
Place: Prag, Češka
Year: 1994
Pages: from 33 to 41
Meeting: 5. mezinarodna konferenca, Society of Plastics Engineers
Held: from 04/26/94 to 04/28/94
- Type of paper
: Paper in proceedings
Title: Computer Aided Troubleshooting on Injection Mouldings
- Authors:
- Slavica, Mladen
- Šercer, Mladen (77160)
- Čatić, Igor (7792)
Proceedings title: Zbornik radova KOREMA 40
Place: Zagreb
Year: 1995
ISBN/ISSN: 953-6037-08-4
Pages: from 197 to 201
Meeting: 40. jubilarni godišnji skup KOREMA
Held: from 04/19/95 to 04/21/95
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Perković, Domagoj
- Kiš, Donald (173774)
- Šercer, Mladen (77160)
Proceedings title: Zbornik radova KOREMA 40
Place: Zagreb
Year: 1995
Pages: from 341 to 344
Meeting: 40. jubilarni godišnji skup KOREMA
Held: from 04/19/95 to 04/21/95
- Type of paper
: Paper in proceedings
Title: Expert System for Removing Visible Faults on Injection
Mouldings
- Authors:
- Šercer, Mladen (77160)
- Slavica, Mladen
- Čatić, Igor (7792)
Proceedings title: Zbornik radova 2. znanstvenog skupa Umjetna inteligencija pri mjerenju i vođenju
Place: Zagreb
Year: 1993
Meeting: 2. znanstveni skup Umjetna inteligencija pri mjerenju i vođenju, CROSS
Held: from 11/05/93 to 11/05/93
- Type of paper
: Paper in proceedings
Title: Injection Moulding of Polymers
- Authors:
- Šercer, Mladen (77160)
- Šercer, Mladen (77160)
Place: Zagreb
Year: 1994
Meeting: Konstruiranje i izradba kalupa za preradu polimera postupcima prešanja
Held: from 04/11/94 to 04/15/94
- Type of paper
: Paper in proceedings
Title: Mixing and Diffusion of Metal Elements in Stellite Laser
Cladding
- Authors:
- Matijević, Božidar (171386)
- Stupnišek, Mladen (76754)
Proceedings title: Zbornik radova međunarodnog savjetovanja: Obradba materijala laserom
Language: hrvatski
Place: Opatija
Year: 1995
ISBN/ISSN: 953-96459-0-5
Pages: from 195 to 204
Meeting: Obrada materijala laserom
Held: from 06/01/95 to 06/03/95
- Type of paper
: Paper in proceedings
Title: Tribological Properties of Steel Treated with different
Surface Treatments
- Authors:
- Matijević, Božidar (171386)
- Ivušić, Vinko
- Oršanić, Želimir
Proceedings title: Zbornik radova međunarodnog savjetovanja: Obradba materijala laserom
Language: hrvatski
Place: Opatija
Year: 1995
ISBN/ISSN: 953-96459-0-5
Pages: from 173 to 182
Meeting: Obrada materijala laserom
Held: from 06/01/95 to 06/03/95
- Type of paper
: Paper in proceedings
Title: Tribological Properties and Kinetics of boride Layer
Formation an Steel
- Authors:
- Matijević, Božidar (171386)
- Oršanić, Želimir
- Karlušić, Bernard (186453)
Proceedings title: Zbornik radova Fakulteta strojarstva i brodogradnje
Language: hrvatski
Place: Zagreb
Year: 1994
ISBN/ISSN: 1330-4364
Pages: from 113 to 122
Meeting: Fakultet strojarstva i brodogradnje
- Type of paper
: Paper in proceedings
Title: Einflus des Stahlausgangszustandes auf die Nitriertiefe
- Authors:
- Cajner, Franjo (76181)
Proceedings title: Zbornik radova međunarodnog savjetovanja: Toplinska obradba metala
Language: hrvatski
Place: Zagreb
Year: 1994
Pages: from 9 to 19
Meeting: Toplinska obradba metala
Held: from 06/23/94
- Type of paper
: Paper in proceedings
Title: Laser Hardening of Grey Iron
- Authors:
- Cajner, Franjo (76181)
- Landek, D.
Proceedings title: Zbornik radova međunarodne konferencije: Obradba materijala laserom
Language: hrvatski
Place: Opatija
Year: 1995
ISBN/ISSN: 953-96459-0-5
Pages: from 205 to 213
Meeting: Obrada materijala laserom
Held: from 06/01/95 to 06/03/95
- Type of paper
: Paper in proceedings
Title: Utjecaj mikrostrukture sivog lijeva na otpornost
toplinskom umoru
- Authors:
- Unkić, Faruk (57790)
- Cajner, Franjo (76181)
- Bartolić, J.
Proceedings title: Zbornik referatov 36. Livarskega posvetovanja
Language: engleski
Place: Portorož, Slovenija
Year: 1995
ISBN/ISSN: 961-90130-1-8
Pages: from 114 to 122
Meeting: 36. Livarsko posvetovanje
Held: from 05/29/95 to 05/30/95
- Type of paper
: Paper in proceedings
Title: Dimansional Changes of Gray Iron During Nitriding
- Authors:
- Cajner, Franjo (76181)
- Božić, T.
Proceedings title: Zbornik radova: Znanstveno stručni ljevački skup
Language: hrvatski
Place: Zagreb
Year: 1994
Pages: from 1 to 11
Meeting: Znanstveno stručni ljevački skup
Held: from 04/15/95 to 04/15/95
- Type of paper
: Paper in proceedings
Title: Resistance of Gray Iron to Thermal Fetigue
- Authors:
- Cajner, Franjo (76181)
- Unkić, Faruk (57790)
- Bartolić, J.
Proceedings title: Zbornik radova: Znanstveno stručni ljevački skup
Language: hrvatski
Place: Zagreb
Year: 1995
Pages: from 35 to 48
Meeting: Znanstveno stručni ljevački skup
Held: from 04/21/95 to 04/21/95
- Type of paper
: Paper in proceedings
Title: A Study of the Properties of Austempered Ductitle Iron
- Authors:
- Unkić, Faruk (57790)
- Cajner, Franjo (76181)
- Krivohlavek, M.
Proceedings title: Zbornik radova: Znanstveno stručni ljevački skup
Language: hrvatski
Place: Zagreb
Year: 1994
Pages: from 23 to 34
Meeting: Znanstveno stručni ljevački skup
Held: from 04/21/95 to 04/21/95
- Type of paper
: Paper in proceedings
Title: Computer-aided Determination of Austenitization Parameters
- Authors:
- Šitum, Ž.
- Cajner, Franjo (76181)
- Essert, M.
Proceedings title: Zbornik radova:KoREMA
Language: bugarski
Year: 1995
ISBN/ISSN: 935-6037-08-4
Pages: from 5339 to 542
Meeting: KoREMA 40/1995
Held: from 04/19/95 to 04/21/95
- Type of paper
: Paper in proceedings
Title: Maraging Steels Containing 12% Chromium for the
Application in Corrosive Environment
- Authors:
- Novosel, Mladen (57005)
- Cajner, Franjo (76181)
Proceedings title: Zbornik radova znanstveno stručnog skupa: Agresivnost medija i pouzdanost opreme
Language: hrvatski
Place: Slavonski Brod
Year: 1994
Pages: from 27 to 42
Meeting: Agresivnost medija i pouzdanost opreme
Held: from 10/06/94 to 10/06/94
- Type of paper
: Paper in proceedings
Title: Computer Application in the Process of Cold Forging in the
Open Die
- Authors:
- Math, Miljenko (29524)
Proceedings title: Zbornik radova: KoREMA 39
Language: hrvatski
Place: Zagreb
Year: 1994
Pages: from 460 to 463
Meeting: KoREMA 39/1994
Keywords: UBET, FEM, Cold Forging
- Type of paper
: Paper in proceedings
Title: The Analysis of Cold Forging Process using two Incremental
Methods
- Authors:
- Math, Miljenko (29524)
Proceedings title: Zbornik radova:12SAVJETOVANJA BIAM
Language: hrvatski
Place: Zagreb
Year: 1995
Pages: from D9 to D12
Meeting: BIAM 94
Held: from 06/23/94 to 06/24/94
Keywords: UBETH, FEM, Closed Die Forging
- Type of paper
: Paper in proceedings
Title: Computer Application in the Process of Cold Closed Die
Forging
- Authors:
- Math, Miljenko (29524)
Proceedings title: Zbornik radova: KoREMA 40
Language: hrvatski
Place: Zagreb
Year: 1995
Pages: from 521 to 524
Meeting: KoREMA 40/1995
Held: from 04/19/95 to 04/21/95
Keywords: UBET, FEM, Closed Die Forging
- Type of paper
: Paper in proceedings
Title: Qualitaetssicherung beim automatischen Giessen elektischer
Waermeplatten mit dem Formenautomat Disamatic
- Authors:
- Budić, Ivan (162480)
Proceedings title: 4. Internationales DAAAM Symposium, Brno, 1993
Place: Brno, Czeshia
Year: 1993
Pages: from 47 to 48
Meeting: 4. INTERNATIONAL DAAAM SYMPOSIUM
Held: from 09/16/93 to 09/18/93
- Type of paper
: Paper in proceedings
Title: The Speed of Developing gas as the Measure for Mold and
Core Mixtures Classification
- Authors:
- Bonačić-Mandinić, Zoran (4456)
- Budić, Ivan (162480)
- Momčinović, Davor (162410)
- Editors
- Galić, Mile
Proceedings title: Zbornik radova: Znanstveno-stručni ljevački skup Zagreb 94
Place: Zagreb
Year: 1994
Pages: from 83 to 94
Meeting: Znanstveno stručni ljevački skup
Held: from 04/15/94 to 04/15/94
- Type of paper
: Paper in proceedings
Title: The Influence of Freezing Range of Aluminium Alloys on
Feeding Efficiency
- Authors:
- Bonačić-Mandinić, Zoran (4456)
- Momčinović, Davor (162410)
- Editors
- Galić, Mile
Proceedings title: Zbornik radova: Znanstveno stručni ljevački skup
Place: Zagreb
Year: 1994
Pages: from 95 to 106
Meeting: Znanstveno stručni ljevački skup
Held: from 04/15/94 to 04/15/94
- Type of paper
: Paper in proceedings
Title: Founding in transmision countries - forecasting for
Croatia
- Authors:
- Bonačić-Mandinić, Zoran (4456)
- Editors
- Galić, Mile
Proceedings title: Zbornik radova: Znanstveno-stručni ljevački skup
Place: Zagreb
Year: 1995
Pages: from 5 to 12
Meeting: Znanstveno stručni ljevački skup
Held: from 04/21/95 to 04/21/95
- Type of paper
: Paper in proceedings
Title: Casting Defects-Possibility of NDT Aplication
- Authors:
- Žagar, Zdravko (55376)
- Editors
- Krstelj, Vjera
Proceedings title: Međunarodno savjetovanje KBR u sustavu kvalitete
Place: Opatija
Year: 1994
Pages: from 149 to 155
Meeting: Međunarodno savjetovanje KBR u sustavu kvalitete
Held: from 06/16/94 to 06/17/94
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Vranješ, Božo (53161)
- Kunica, Zoran (162390)
- Editors
- Srb, Neven
Proceedings title: 5th International Symposium on New Technologies
Place: Poreč
Year: 1995
Pages: from 152 to 154
Meeting: 5th International Symposium on New Technologies
Held: from 09/25/95 to 09/27/95
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Vranješ, Božo (53161)
- Kunica, Zoran (162390)
- Jerbić, Bojan (121164)
- Editors
- Srb, Neven
Proceedings title: 5th International Symposium on New Technologies
Place: Poreč
Year: 1995
Pages: from 167 to 171
Meeting: 5th International Symposium on New Technologies
Held: from 09/25/95 to 09/27/95
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Kunica, Zoran (162390)
- Editors
- Srb, Neven
Proceedings title: 5th International Symposium on New Technologies
Place: Poreč
Year: 1995
Pages: from 155 to 158
Meeting: 5th International Symposium on New Technologies
Held: from 09/25/95 to 09/27/95
- Type of paper
: Paper in proceedings
Title: DESINGNIG OF ORIJENTING DEVICE WITH CONCURRENT ENGINEERING
APPROACH
- Authors:
- Vrtodušić, Dražen
- Editors
- Srb, Neven
Proceedings title: 5th International Symposium on New Technologies
Place: Poreč
Year: 1995
Pages: from 159 to 162
Meeting: 5th International Symposium on New Technologies
Held: from 09/25/95 to 09/27/95
- Type of paper
: Paper in proceedings
Title: STRUCTURE FLEXIBLE MANUFACTURING STATION BY SIMULATION
- Authors:
- Grolinger, K.
- Editors
- Srb, Neven
Proceedings title: 5th InternationaL Symposium on New Technologies
Place: Poreč
Year: 1995
Pages: from 163 to 166
Meeting: 5th International Symposium on New Technologies
Held: from 09/25/95 to 09/27/95
- Type of paper
: Paper in proceedings
Title: INDUCTIVE METHOD FOR LEARNING GEOMETRY STRUCTURES
- Authors:
- Jerbić, Bojan (121164)
- Editors
- Šurina, Tugomir (48562)
Proceedings title: Zbornik radova BIAM 94
Place: Zagreb
Year: 1994
Pages: from 5 to 8
Meeting: 12. međunarodno savjetovanje BIAM 94
Held: from 06/23/94 to 06/24/94
- Type of paper
: Paper in proceedings
Title: METHOD FOR DEFINING THE PART ORIENTATION
- Authors:
- Vrtodušić, Dražen
- Editors
- Šurina, Tugomir (48562)
Proceedings title: Zbornik BIAM 94
Place: Zagreb
Year: 1994
Pages: from 21 to 24
Meeting: 12. međunarodno savjetovanje BIAM 94
Held: from 06/23/94 to 06/24/94
- Type of paper
: Paper in proceedings
Title: ALGORITAM FOR ASSEMBLY SEQUENCE DEFINING
- Authors:
- Kunica, Zoran (162390)
- Ezgeta, Tonći
- Editors
- Šurina, Tugomir (48562)
Proceedings title: 12. međunarodno savjetovanje BIAM 94
Place: Zagreb
Year: 1994
Pages: from 13 to 16
Meeting: BIAM 94
Held: from 06/23/94 to 06/24/94
- Type of paper
: Paper in proceedings
Title: PLAN GENERATING OF AUTOMATIC ASSEMBLY USING CAD
- Authors:
- Kunica, Zoran (162390)
- Editors
- Šurina, Tugomir (48562)
Proceedings title: Zbornik radova BIAM 94
Place: Zagreb
Year: 1994
Pages: from 17 to 20
Meeting: 12. međunarodno savjetovanje BIAM 94
Held: from 06/23/94 to 06/24/94
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Jerbić, Bojan (121164)
- Vrtodušić, Dražen
- Vranješ, Božo (53161)
- Editors
- Rzevski, George
- Adey, Robert
- Russel, D.W:
Proceedings title: AIENG IX
Place: Boston, SAD
Year: 1994
Pages: from 479 to 486
Meeting: Applications of Artificial Intelligence in Engineering 9 (AIENG 94)
Held: from 07/19/94 to 07/21/94
- Type of paper
: Paper in proceedings
Title: ASSEMBLY-THE FIELD OF ACTUAL RATIONALISATIONS
- Authors:
- Vranješ, Božo (53161)
- Editors
- VEŽA, IVICA
- ROVAN, MARIO
Proceedings title: Zbornik radova PS 95
Place: Split
Year: 1995
Pages: from 77 to 93
Meeting: 2. međunarodni seminar Proizvodni sustavi PS 95
Held: from 09/21/95 to 09/22/95
- Type of paper
: Paper in proceedings
Title: Technical and Technological Development and Croatian
Industry
- Authors:
- Vranješ, Božo (53161)
- Editors
- Šurina, Tugomir (48562)
Proceedings title: 12. Međunarodno savjetovanje BIAM 94
Place: Zagreb
Year: 1994
Pages: from 1 to 4
Meeting: 12. međunarodno savjetovanje BIAM 94
Held: from 06/23/94 to 06/24/94
- Type of paper
: Paper in proceedings
Title: Contribution to the Quantitative analysis of Hot Tears in
steel Casting
- Authors:
- Grozdanić, Vladimir (130280)
- Editors
- Šurina, Tugomir (48562)
Proceedings title: 12. Međunarodno savjetovanje BIAM'94
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-6037-03-3
Pages: from I5 to I7
Meeting: 12. međunarodno savjetovanje BIAM 94
Held: from 06/23/94 to 06/24/94
- Type of paper
: Paper in proceedings
Title: Study of SiCa Modifited Highsilicon Cast Iron Properties
- Authors:
- Unkić, Faruk (57790)
- Tounec, Sonja (82975)
- Mikulić, Mario
- Editors
- Šurina, Tugomir (48562)
Proceedings title: 12. Međunarodno savjetovanje BIAM'94
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-6027-03-3
Pages: from I-12 to I-16
Meeting: 12. međunarodno savjetovanje BIAM 94
Held: from 06/23/94 to 06/24/94
- Type of paper
: Paper in proceedings
Title: Corrosion Stability of Modificated Silicon Cast Iron
- Authors:
- Malina, Jadranka
- Unkić, Faruk (57790)
- Kolarević, Ž.
- Editors
- Esih, Ivan (11364)
Proceedings title: 11. Savjetovanje o zaštiti materijala i industrijskom finišu
Place: Zagreb
Year: 1994
Pages: from 94 to 102
Meeting: 11. savjetovanje o zaštiti materijala i industrijskom finišu
Held: from 06/23/94 to 06/24/94
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Unkić, Faruk (57790)
- Editors
- Trbižan, Milan
Proceedings title: 35. livarskeg strokovneg posvetovanja s sodelovanjem držav eksagonale
Place: Portorož, Slovenija
Year: 1994
ISBN/ISSN: 961-90130-0-X
Pages: from 96 to 105
Meeting: 35. Livarsko strokovno posvetovanje
Held: from 09/29/94 to 09/30/94
- Type of paper
: Paper in proceedings
Title: Research of resistance to wear of Cast rolls
- Authors:
- Mamuzić, Ilija (27862)
- Gorjanoj, Vj.
Proceedings title: 12. Međunarodno savjetovanje BIAM'94
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-6037-03-3
Pages: from I-8 to I-11
Meeting: 12. međunarodno savjetovanje BIAM 94
Held: from 06/23/94 to 03/24/94
- Type of paper
: Paper in proceedings
Title: Research of deformation resistance of highhard weldable
structual Steel
- Authors:
- Križanić, Rade (23663)
- Hensel, Arno
- Mamuzić, Ilija (27862)
- Nikolić, Đurđica (82990)
Proceedings title: 12. Međunarodno savjetovanje BIAM'94
Place: Zagreb
Year: 1994
ISBN/ISSN: 9536037-03-3
Pages: from I-17 to I-21
Meeting: 12. međunarodno savjetovanje BIAM 94
Held: from 06/23/94 to 06/24/94
- Type of paper
: Paper in proceedings
Title: The Investigation of the Metal Forming Processes Using
Nonlinear Progamming Technique
- Authors:
- Binkevich, I.
- Mamuzić, Ilija (27862)
- Medvedeva, L.
Proceedings title: 1st Congress of Croatian Society of Mechanics
Place: Pula
Year: 1994
ISBN/ISSN: 953-96243-4
Pages: from 505 to 510
Meeting: 1st Congress of Croatian Society of Mechanics
Held: from 09/14/94 to 09/17/94
- Type of paper
: Paper in proceedings
Title: The Determination of the Plain Strain Plastic-Flow
Parameters Using
- Authors:
- Mamuzić, Ilija (27862)
- Binkevich, I.
- Medvedeva, L.
Proceedings title: 6th International Conference of FORMABILITY 94
Place: Ostrava
Year: 1994
Pages: from 382 to 389
Meeting: 6th International Conference of FORMABILITY 94
Held: from 10/21/94 to 10/24/94
- Type of paper
: Paper in proceedings
Title: Mathematical model of steel hollow shell cooling
- Authors:
- Golja, Marijan (57764)
- Mamuzić, Ilija (27862)
Proceedings title: KoREMA 39
Place: Zagreb
Year: 1994
ISBN/ISSN: 9536037-02-5
Pages: from 471 to 474
Meeting: KoREMA 39/1994
Held: from 04/25/94 to 04/27/94
- Type of paper
: Paper in proceedings
Title: 6000 Years of Metallurgy in Croatia
- Authors:
- Mamuzić, Ilija (27862)
- Editors
- Muljević, Vladimir
Proceedings title: Razvitak i dostignuća tehničkih područja u Hrvatskoj
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-6002-01-9
Pages: from 233 to 259
Meeting: Razvitak i dostignuća tehničkih područja u Hrvatskoj
Held: from 09/23/94 to 09/23/94
- Type of paper
: Paper in proceedings
Title: On Creep Deformation Behaviour of Wrough Nickel Base
Superalloy
- Authors:
- Zrnik, J.
- Vrchovinski, V.
- Mamuzić, Ilija (27862)
Proceedings title: 9th Symposium of Metallography "Metallography 95"
Place: Košice, Slovačka
Year: 1995
ISBN/ISSN: 80-7099-2
Pages: from 226 to 229
Meeting: 9th Symposium of Metallography
Held: from 04/26/95 to 04/28/95
- Type of paper
: Paper in proceedings
Title: Not Computer Integrated Manufacturing (CIM) but Human
Integrated Manufacturing (HIM)
- Authors:
- Mikšić, Dragutin (57176)
Proceedings title: Zbornik radova FSB
Place: Zagreb
Year: 1994
ISBN/ISSN: 1330-4364
- Type of paper
: Summary in proceedings
Title: Environment quality - part of product development
- Authors:
- Čatić, Igor (7792)
- Širović, Ivana
- ,
Proceedings title: Uloga znanosti u održivom razvoju
Place: Zagreb
Year: 1993
Pages: from 0 to 0
- Type of paper
: Summary in proceedings
Title: How Particle Foam and Formulation of Thermoplastics Blends
Influence Some Properties of Low Density Polyethilene Tubular Film
- Authors:
- Čatić, Igor (7792)
Proceedings title: 11. dani plastičara i gumaraca
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from 44 to 45
Meeting: 11. dani plastičara i gumaraca
Held: from 06/15/93 to 06/18/93
- Type of paper
: Summary in proceedings
Title: Systemic Analysis of Polymerprimary Shaping - Scientific
and Educational Aspects
- Authors:
- Čatić, Igor (7792)
Proceedings title: 11. dani plastičara i gumaraca
Place: Zagreb
Year: 1993
Pages: from 53 to 53
Meeting: 11. dani plastičara i gumaraca
Held: from 06/15/93 to 06/18/93
- Type of paper
: Summary in proceedings
Title: Design of Moulds for Injection Moulding by Using the Modul
for Mould Standard Base
- Authors:
- Čatić, Igor (7792)
- Buntak, Krešimir
Proceedings title: 11. dani plastičara i gumaraca
Place: Zagreb
Year: 1993
Pages: from 54 to 54
Meeting: 11. dani plastičara i gumaraca
Held: from 06/15/93 to 06/18/93
- Type of paper
: Summary in proceedings
Title: Production Properties of Rubber Compounds
- Authors:
- Szabo, Tereza
- Čatić, Igor (7792)
- Šercer, Mladen (77160)
Proceedings title: 11. dani plastičara i gumaraca
Place: Zagreb
Year: 1993
Pages: from 56 to 56
Meeting: 11. dani plastičara i gumaraca
Held: from 06/15/93 to 06/18/93
- Type of paper
: Summary in proceedings
Title: HEFEST - Expert System for Fault Removing on Thermoforming
Parts
- Authors:
- Slavica, Mladen
- Čatić, Igor (7792)
Proceedings title: 11. dani plastičara i gumaraca
Place: Zagreb
Year: 1993
Pages: from 58 to 59
Meeting: 11. dani plastičara i gumaraca
Held: from 06/15/93 to 06/18/93
- Type of paper
: Summary in proceedings
Title: Expert System for Removing of Visible Moulding Faults
- Authors:
- Šercer, Mladen (77160)
- Slavica, Mladen
- Čatić, Igor (7792)
Proceedings title: 11. dani plastičara i gumaraca
Place: Zagreb
Year: 1993
Pages: from 63 to 63
Meeting: 11. dani plastičara i gumaraca
Held: from 06/15/93 to 06/18/93
- Type of paper
: Summary in proceedings
Title: State of Equiping in the Injection Moulding Shops in
Croatia
- Authors:
- Čatić, Igor (7792)
- Curić, Dijana
Proceedings title: 11. dani plastičara i gumaraca
Place: Zagreb
Year: 1993
Pages: from 64 to 64
Meeting: 11. dani plastičara i gumaraca
Held: from 06/15/93 to 06/18/93
- Type of paper
: Summary in proceedings
Title: Analiza konačnih elemenata primjenjena na gumu
- Authors:
- Raos, Pero (121221)
- Michaeli, W.
- Mohr-Matuschek, U.
Proceedings title: Eighth Annual Meeting of Polymer Processing Society
Place: New Delhi, Indija
Year: 1992
Pages: from 0 to 0
Meeting: 8th Annual Meeting of Polymer Processing Society
- Type of paper
: Summary in proceedings
Title: Modeli elastičnog ponašanja gume i njihova uporaba u
analizi konačnih elemenata
- Authors:
- Raos, Pero (121221)
- Michaeli, W.
- Mohr-Matuschek, U.
Proceedings title: Rubbercon 92
Place: Brighton, Velika Britanija
Year: 1992
Pages: from 0 to 0
- Type of paper
: Summary in proceedings
Title: Dimensioning of Moulding by Means of Finite Elements
Method
- Authors:
- Kiš, Donald (173774)
- Škevin, Igor
Proceedings title: 11. dani plastičara i gumaraca
Place: Zagreb
Year: 1993
Pages: from 63 to 64
Meeting: 11. dani plastičara i gumaraca
Held: from 06/15/93 to 06/18/93
- Type of paper
: Summary in proceedings
Title: Usporedba analogne i numeričke simulacije temperaturnog
polja u kalupu za injekcijsko prešanje plastomera
- Authors:
- Raos, Pero (121221)
- Čatić, Igor (7792)
Proceedings title: Ninth Annual Meeting of Polymer Processing Society (PPS 9)
Place: Manchester, Velika Britanija
Year: 1993
Pages: from 407 to 408
Meeting: 9th Annual Meeting of Polymer Processing Society
Held: from 04/05/93 to 04/08/93
- Type of paper
: Summary in proceedings
Title: Ekspertni sustav za uklanjanje grešaka pri injekcijskom
prešanju
- Authors:
- Šercer, Mladen (77160)
- Slavica, Mladen
- Čatić, Igor (7792)
Proceedings title: Ninth Annual Meeting of Polymer Processing Society (PPS-9)
Place: Manchester, Velika Britanija
Year: 1993
Pages: from 0 to 0
Meeting: 9th Annual Meeting of Polymer Processing Society
Held: from 04/05/93 to 04/08/93
- Type of paper
: Summary in proceedings
Title: The influence of electrolyte composition on new phase
deposition at steel surface
- Authors:
- Šešerin, Ivica
- Malina, Jadranka
- Marjanović, Tihana
Proceedings title: Second symposium Ecologically rational development of chemical technologies
Place: Zagreb
Year: 1993
Pages: from 219 to 219
Meeting: XIII. Skup Hrvatskih kemičara
Held: from 02/10/93 to 02/11/93
- Type of paper
: Summary in proceedings
Title: Investigation of Steel Flow Stress and Limit Deformability
by Means of Hot Torsion Test
- Authors:
- Golja, Marijan (57764)
Proceedings title: Materijali i metalurgija, Sažeci predavanja
Place: Sisak
Year: 1993
ISBN/ISSN: 0543-5846
Pages: from 185 to 199
Meeting: Simpozij Hrvatskih Metalurga
Held: from 02/16/94 to 02/18/94
Summary: This papir deals with the problems of steel flow stress and
limitdeformability investigation at elevated temperatures.
Keywords: Steel flow stress, Limit deformability
- Type of paper
: Summary in proceedings
Title: Dressing or Chrushing a Cutting Surface of Grinding Wheel
- Authors:
- Cebalo, Roko (59430)
Proceedings title: 3. DAAAM
Language: engleski
Place: Budapest, Hungary
Year: 1992
Pages: from 41 to 42
Meeting: 3.International DAAAM Symposium
Held: from 11/04/92 to 11/06/92
Summary: Dressing of grinding wheel cutting surface has significant
rolein forming the grinding-wheel characteristics, especially on
highmaterial removal rate. The selection of the grinding-wheelspecification
is very significant for obtainig higher materialremoval rate and desired
ground-surface quality, but inconnection with conditions and ways of
grinding-wheel cuttingsurface dressing.
Keywords: grinding wheel cutting surface, dressing, crushing, grinding
- Type of paper
: Summary in proceedings
Title: A Contribution to Methods for Monitoring of Tool Condition
- Authors:
- Udiljak, Toma (90974)
Proceedings title: 3. DAAAM
Language: engleski
Place: Budapest, Hungary
Year: 1992
Pages: from 0 to 0
Meeting: 3.International DAAAM Symposium
Held: from 11/04/92 to 11/06/92
Summary: This paper describes the procedure for detection of tool
flank
wear in limited class of machining operations and results of
initial investigation for establishing the relation F=f(B), where
F is a force, and B is tool flank wear. Tool wear is obtained by
"imitating" natural tool wear with grinding.
Keywords: tool life testing, tool monitoring
- Type of paper
: Summary in proceedings
Title: Machinability of Hard Materials
- Authors:
- Yeshitila, Wuhib (134984)
Proceedings title: 3. DAAAM
Language: engleski
Place: Budapest, Hungary
Year: 1992
Pages: from 195 to 196
Meeting: 3.International DAAAM Symposium
Held: from 11/04/92 to 11/06/92
Summary: This work shows the posibilities to find the definition
ofmachinability of hard materials. The performance of tool life andsurface
roughness has been evaluated by turning hard materialswith coated carbide
tools. To obtain statistically significantresults, a four-factor two level
experiment was applied.Experimental results were treated with regression
analysis. Thepurpose of this research work was to lay the foundation for
toolmanagement in the machinability of hard materials.
Keywords: machinability, hard materials, tool management
- Type of paper
: Summary in proceedings
Title: Influence of Ratio Db/Do on Roughness of Grinding Surface
in Internal Grinding
- Authors:
- Ciglar, Damir (121120)
Proceedings title: 4. DAAAM
Place: Brno, Czeshia
Year: 1993
Pages: from 59 to 61
Meeting: 4. INTERNATIONAL DAAAM SYMPOSIUM
Held: from 09/16/93 to 09/18/93
Keywords: internal grinding, ratio Db/Do, roughness
- Type of paper
: Summary in proceedings
Title: CAD/CAM System for Prosthetic Sockets
- Authors:
- Yeshitila, Wuhib (134984)
Proceedings title: 4. DAAAM
Language: engleski
Place: Brno, Czeshia
Year: 1993
Pages: from 387 to 388
Meeting: 4. INTERNATIONAL DAAAM SYMPOSIUM
Held: from 09/16/93 to 09/18/93
Summary: With the increasing number of people who need prosthetics,
it isessential to be involved in high level technology to increase
thequality and capacity of the prosthetic service. Camputer AidedDesign and
Computer Aided Manufacturing (CAD/CAM is analternative method of socket
design and fabrication which isbeginning to enter clinical practice in
using the method of themicrocomputer to automate repetitive portions of the
fabricationprocess. Future generation of CAD/CAM systems may change the
faceof prosthetics because the use of computer enebles those withfewer
manual skills to make properly fitting sockets.
Keywords: prosthetics, CAD/CAM, socket
- Type of paper
: Summary in proceedings
Title: On Possibilities for Investigating the Influence of Tool
Wear on Cutting Forces
- Authors:
- Udiljak, Toma (90974)
Proceedings title: 4. DAAAM
Language: engleski
Place: Brno, Czeshia
Year: 1993
Pages: from 0 to 0
Meeting: 4. INTERNATIONAL DAAAM SYMPOSIUM
Held: from 09/16/93 to 09/18/93
Summary: The importance of in-process tool monitoring grows with
thedegree of automation, because tool wear reflects tool geometry,workpiece
dimension, surface roughness and parameters of cuttingprocess. Sensing of
cutting forces is the most used method forindirect, in-process detection of
tool condition. Esatblishing ofadequate mathematical model for relation
between tool wear andcutting forces demands a lot of experimental work.
This workpresents the result of investigation based on simulation of
toolwear by grinding. By using this procedure it is possible to
reachconsiderable savings in time, material, and energy.
Keywords: tool life, tool wear, cutting forces
- Type of paper
: Summary in proceedings
Title: General Mathematical Expression of Some Transmission
Gearbox's Magnitudes for Computer Optimization
- Authors:
- Motika, Romano (32503)
Proceedings title: 4. DAAAM
Place: Brno, Czeshia
Year: 1993
Pages: from 201 to 202
Meeting: 4. INTERNATIONAL DAAAM SYMPOSIUM
Held: from 09/16/93 to 09/18/93
Keywords: general mathematical expression, transmission gearbox, computer optimization
- Type of paper
: Summary in proceedings
Title: Optimization of Electrochemical Machining
- Authors:
- Cebalo, Roko (59430)
- Rast, Ivan
- Ivanišević, Robert
Proceedings title: 4. DAAAM
Place: Brno, Czeshia
Year: 1993
Pages: from 53 to 54
Meeting: 4. INTERNATIONAL DAAAM SYMPOSIUM
Held: from 09/16/93 to 09/18/93
Summary: By electro-chemical Machining, compressor gas turbin
bladeairfoil was machined from full prism shape sample followed
byresearching the influence of independed parameters upon machinigresults
in relation to approved surface roughness values anddeviations from defined
profile for critical section. Theanalisys of results was made according to
test plan and availableresults are for martensit steel with defined
structure.
Keywords: average arithmetical roughness of surface, roughness depth of surface, deviation from define blade profile
- Type of paper
: Summary in proceedings
Title: Continuous and Discontinuous dressing of Grinding Wheel
Cutting Surface
- Authors:
- Cebalo, Roko (59430)
Proceedings title: 4. DAAAM
Place: Brno, Czeshia
Year: 1993
Pages: from 53 to 54
Meeting: 4. INTERNATIONAL DAAAM SYMPOSIUM
Held: from 09/16/93 to 09/18/93
- Type of paper
: Summary in proceedings
Title: Odnos između optimalnih brojeva sklopova kod optimizacije
zupčastih prigona
- Authors:
- Ivančić, Ivan (94855)
Place: Budapest, Hungary
Year: 1992
Pages: from 0 to 0
Meeting: 3.International DAAAM Symposium
Held: from 11/04/92 to 11/06/92
Keywords: gear transmission, optimization, number of transmission groups
- Type of paper
: Summary in proceedings
Title: Mogućnosti i granice smanjivanja zastoja kod FPS-a
- Authors:
- Ivančić, Ivan (94855)
Place: Brno, Czeshia
Year: 1993
Pages: from 127 to 128
Meeting: 4. INTERNATIONAL DAAAM SYMPOSIUM
Held: from 09/16/93 to 09/18/93
- Type of paper
: Summary in proceedings
Title:
- Authors:
- Lisičar, Josip (52193)
Proceedings title: DAAAM 92
Place: Budapest, Hungary
Year: 1992
Pages: from 0 to 0
Meeting: 3.International DAAAM Symposium
Held: from 11/04/92 to 11/06/92
- Type of paper
: Summary in proceedings
Title: Analysis of absic Fields in Favrication of Polymeric
Composites
- Authors:
- Čatić, Igor (7792)
- Editors
- Čatić, Igor (7792)
Proceedings title: 12. dani Društva plastčara i gumaraca
Place: Zagreb
Year: 1994
Pages: from 5
Meeting: 8. savjetovanje Vlaknima ojačani polimerni kompoziti
Held: from 06/21/94 to 06/24/94
- Type of paper
: Summary in proceedings
Title: Application of Insulation Barriers in Moulds for Injection
Moulding of Polymers
- Authors:
- Čatić, Igor (7792)
- Godec, Damir
- Editors
- Čatić, Igor (7792)
Proceedings title: 12. dani Društva plastičara i gumaraca
Place: Zagreb
Year: 1994
Pages: from 45 to 48
Meeting: 12. savjetovanje o proizvodnji, primjeni i preradbi plastike i gume
Held: from 06/21/94 to 06/24/94
- Type of paper
: Summary in proceedings
Title: Description of Injection Moulding by Input and output
Trajectories
- Authors:
- Čatić, Igor (7792)
- Grbić, Nives
- Editors
- Čatić, Igor (7792)
Proceedings title: 12. dani Društva plastičara i gumaraca
Place: Zagreb
Year: 1994
Pages: from 54 to 57
Meeting: 12. savjetovanje o proizvodnji, primjeni i preradbi plastike i gume
Held: from 06/21/94 to 06/24/94
- Type of paper
: Summary in proceedings
Title: analysis of Injection Mould Damages
- Authors:
- Čatić, Igor (7792)
- Juračić, Ivica
- Editors
- Čatić, Igor (7792)
Proceedings title: 12. dani društva plastičara i gumaraca
Place: Zagreb
Year: 1994
Pages: from 58
Meeting: 12. savjetovanje o proizvodnji, primjeni i preradbi plastike i gume
Held: from 06/21/94 to 06/24/94
- Type of paper
: Summary in proceedings
Title: Analysis of Reactive Casting Process during Production of
PA6 Castings by Anionic Polymerization of Epsylon-caprolactame
- Authors:
- Mišćević, Marija (31954)
- Šercer, Mladen (77160)
- Čatić, Igor (7792)
- Editors
- Čatić, Igor (7792)
Proceedings title: 12. dani Društva plastičara i gumaraca
Place: Zagreb
Year: 1994
Pages: from 71
Meeting: 12. savjetovanje o proizvodnji, primjeni i preradbi plastike i gume
Held: from 06/21/94 to 06/24/94
- Type of paper
: Summary in proceedings
Title: Systematic Approach in Troubleshooting of Injection
Moulded Polymer Parts
- Authors:
- Slavica, Mladen
- Šercer, Mladen (77160)
- Čatić, Igor (7792)
- Editors
- Čatić, Igor (7792)
Proceedings title: 12. dani Društva plastičara i gumaraca
Place: Zagreb
Year: 1994
Pages: from 36 to 39
Meeting: 1. savjetovanje Jamstvo kakvoće u polimerstvu
Held: from 06/21/94 to 06/24/94
- Type of paper
: Summary in proceedings
Title: Systematization of Moulds for Injection Moulding of
Thermoplastics Based on Partial-Function Approach
- Authors:
- Čatić, Igor (7792)
- Vince, Ira
- Editors
- Čatić, Igor (7792)
Proceedings title: 12. dani društva plastičara i gumaraca
Place: Zagreb
Year: 1994
Pages: from 42 to 44
Meeting: 12. savjetovanje o proizvodnji, primjeni i preradbi plastike i gume
Held: from 06/21/99 to 06/24/94
- Type of paper
: Summary in proceedings
Title:
- Authors:
- Čatić, Igor (7792)
- Španiček, Đurđica
Place: Zagreb
Year: 1995
Pages: from 403
Meeting: 4. simpozij o kemiji i tehnologiji makromolekula
Held: from 02/04/95 to 02/06/95
- Type of paper
: Summary in proceedings
Title: Statistical Quality Control in Cable Insulations Extrusion
- Authors:
- Rujnić-Sokele, Maja
- Brajković, Nives
- Čatić, Igor (7792)
- Editors
- Čatić, Igor (7792)
Proceedings title: 12. dani Društva plastičara i gumaraca
Place: Zagreb
Year: 1994
Pages: from 32 to 35
Meeting: 1. savjetovanje Jamstvo kakvoće u polimerstvu
Held: from 06/21/94 to 06/24/94
- Type of paper
: Summary in proceedings
Title: Fuzzy Control of Injection Moulding Process
- Authors:
- Kiš, Donald (173774)
- Perković, Domagoj
- Editors
- Čatić, Igor (7792)
Proceedings title: 12. dani Društva plastičara i gumaraca
Place: Zagreb
Year: 1994
Pages: from 49 to 53
Meeting: 12. savjetovanje o proizvodnji, primjeni i preradbi plastike i gume
Held: from 06/21/94 to 06/24/94
- Type of paper
: Summary in proceedings
Title: Quality Assurance of Polymeric Parts
- Authors:
- Šercer, Mladen (77160)
- Editors
- Čatić, Igor (7792)
Proceedings title: 12. dani Društva plastičara i gumaraca
Place: Zagreb
Year: 1994
Pages: from 22 to 22
Meeting: 1. savjetovanje Jamstvo kakvoće u polimerstvu
Held: from 06/21/94 to 06/24/94
- Type of paper
: Summary in proceedings
Title:
- Authors:
- Vranješ, Božo (53161)
- Kunica, Zoran (162390)
- Jerbić, Bojan (121164)
Proceedings title: 6th Internacional DAAAM Symposium
Place: Krakow, Poljska
Year: 1995
Meeting: 6th International DAAAM Symposium
Held: from 10/26/95 to 09/28/95
- Type of paper
: Summary in proceedings
Title:
- Authors:
- Jerbić, Bojan (121164)
- Vranješ, Božo (53161)
- Kunica, Zoran (162390)
Proceedings title: 6th International DAAAM Symposium
Place: Krakow, Poljska
Year: 1995
Meeting: 6th International DAAAM Symposium
Held: from 10/26/95 to 10/28/95
- Type of paper
: Summary in proceedings
Title: Determination of Relative Influence of Factors on Final
Value
- Authors:
- Čatić, Igor (7792)
- Šercer, Mladen (77160)
Proceedings title: Zbornik sažetaka radova
Place: Zagreb
Year: 1993
Pages: from 44 to 44
Meeting: Od uzoraka do podataka i informacije, CROSS
Held: from 10/20/93 to 10/23/93
- Type of paper
: Summary in proceedings
Title: On-line Control of the Injection Moulding Process
- Authors:
- Šercer, Mladen (77160)
Proceedings title: Zbornik sažetaka radova
Place: Zagreb
Year: 1993
Pages: from 68 to 68
Meeting: Od uzoraka do podataka i informacije, CROSS
Held: from 10/20/93 to 10/23/93
- Type of paper
: Ph.D.
Title: Tree-dimensional Mathematical Model of Solidification and
Possibility to Predict Shrinkage Cavity in Steel Casting of Complex
Geometry.
Faculty: Metalurški fakultet, Sisak Zagreb
Author: GROZDANIĆ VLADIMIR
Date of defense: 12/20/93
Number of pages: 226
Summary: Three-dimensional mathematical model of solidification of
steelcasting of complex geometry in sand mold has been presented inthe
paper. An algorithm is obtained by means of numerical imlicitBrian method,
and programmed in computer language ASCII FORTRANfor Sperry 1106.
Simulation of solidification process isperformed for low-carbon steel
casting with 0.25% carbon and sandmold of known thermal properties. On the
basis of simulation thesolidification time and the way of solidification
can bedeterminated, and together with model of temperature gradient
thepoint of occurrence and dimebnsions of shrinkage cavity in thecasting.
Mathematical models were experimentally verified bymeans of measurement of
temperature in casting and sand mold, andvisuallz (location and dimension
of shrinkage cavity). Thecomputed results agreed relatively well with the
experiment. Theresults obtained enable to point in modern and scientific
way tothe point of occurrence and dimensions of shrinkage cavity incasting
of complex geometry.
Keywords: Three-dimensional mathematical model, Solidification, Steel casting, Sand mold, Shrinkage cavity
- Type of paper
: Ph.D.
Title: Contribution for Optimization of Machine Tool Tranmitters
According toDifferent Criterions of Design and Work by General Presentation
Faculty: Fakultet strojarstva i brodogradnje Zagreb
Date of defense: 02/22/91
Number of pages: 131
Summary: So far, optimization of transmission gearbox as an integral
partof machine tool is partially solved, i.e. each criteria has been
considered separately and even in the scope of same criteria,
different approaches were applied. This can cause certain
problems when verifying the obtained results of optimization.Most of
article include a problem called "geometricoptimization". Although other
criteria are represented insome articles, they include the simplest
realizations of thetranssmision gearbox.
Because of this, the mentioned problem is treated in its
complexity. All the numerical quantities are presented in general
mathematical expressions, depending on the parameters of gradual
stepped variation, sructure of transmission gearbox and loading
capacity. The level of their deppedence on the mentioned
parameters is given by exponents presented in the form of tables.
On the basis of general mathematical expression, the
optimization method is adapted for computer application. Thisoffers quick
finding of optimal values of the considered criteria
for a certain range of overall transmission gear ratio (i0). Allthe design
variants and coresponding subcriteria for the strengthof materials are
taken into consideration. The reults for each
criteria are given in the form of tables and graphs.
A simple and quick way of evaluation for the obtained
results is made by comparing the values of the mentioned solution
to the values obtained for transmission gearbox with equally
distributed transmission ratio.
Keywords: optimization of the transmission gearbox, general mathematical expression
- Type of paper
: Ph.D.
Title: CAD MODEL GEOMETRY INTERPRETATION IN PLANNING OF AUTOMATED
ASSEMBLY BY EXPERT SYSTEM
Faculty: Fakultet strojarstva i brodogradnje Zagreb
Author: JERBIĆ BOJAN
Date of defense: 05/27/93
Number of pages: 179
- Type of paper
: Ph.D.
Title: A Contribution to the Creation of a Matematical Model of
Al-Foil Contact Rolling
Faculty: Fakultet strojarstva i brodogradnje Zagreb
Author: ĆOSIĆ PREDRAG
Date of defense: 06/28/94
Number of pages: 164
Keywords: Contact Rolling, Optimization, Algorithm
- Type of paper
: Ph.D.
Title: Beitrag zur Kenntnis des Blasenbildungsmechanismus in den
Abguessen
Faculty: Fakultet strojarstva i brodogradnje Zagreb
Author: BUDIĆ IVAN
Date of defense: 09/22/94
Number of pages: 294
- Type of paper
: Ph.D.
Title: The Characteristics Properties Processing of Materials by
High Temperature Thermomechanical Processing
Faculty: Metalurški fakultet, Sisak Zagreb
Author: KRIŽANIĆ RADE
Date of defense: 02/20/95
- Type of paper
: M.A.
Title: The Influence of Grinding Wheel Contact Length to
Roughness of Grinding Surface
Faculty: Fakultet strojarstva i brodogradnje Zagreb
Date of defense: 12/02/93
Number of pages: 111
Summary: In this work, the influence of contact length (between
grinding
wheel and workpiece) to the roughness of grounded surface for
process of internal round peripheral grinding, is investigated.
Geometric contact length is dependent parameter and it can
be varied at three different ways: by changing grinding wheel
diameter, by changing workpiece diameter and by changing grinding
depth.
In changing of grinding wheel diameter, research shoes that
there is a range of values for geometric contact length in which
roughness of the grounded surface is minimal. These results can
be applied in smooth internal grinding process because in these
research reduced material removal rate is constant.
In changing of workpiece diameter, influence of geometric
contact length to the roughness of the grounded surface is
similar as in previous investigation, but these way of change the
geometric contact length has no practical meaning.
The third way of changing values of geometric contact
length, by changing grinding depth, causes increase in roughness
of grounded surface with increase of geometric contact length.
This results can be applied in rough internal grinding
process, because reduced material removal rate increase with
increase in geometric contact length.
The results of factorial experiment shoes that roughness of
the grounded surface increase by increasing speed of ground
surface, axial table feed speed, diamond feed and geometric
contact length. These research confirm the previous statement
that, for rough internal grinding process, there is no range of
values for geometric contact length in which roughness of the
grounded surface is minimal.
Keywords: internal grinding, roughness of ground surface, grinding wheel contact length
- Type of paper
: M.A.
Title: GENERATING OF FUNCTIONAL STRUCTURE OF AUTOMATED ASSEMBLY
SYSTEMS
Faculty: Fakultet strojarstva i brodogradnje Zagreb
Author: KUNICA ZORAN
Date of defense: 03/20/92
Number of pages: 107
- Type of paper
: M.A.
Title: Heat Diffussion Proces Boriding of Steels
Faculty: Fakultet strojarstva i brodogradnje Zagreb
Author: MATIJEVIĆ BOŽIDAR
Date of defense: 09/15/92
Number of pages: 91
- Type of paper
: M.A.
Title: Influence of Working Parameters on the Feeding Efficiency
of Castings
Faculty: Fakultet strojarstva i brodogradnje Zagreb
Author: MOMČINOVIĆ DAVOR
Date of defense: 06/30/94
Number of pages: 99
- Type of paper
: Mentorship
Title: Contribution for Optimization of Machine Tool Transmitters
According to Different Criterions of Design and Work by General
Presentation
Faculty: Fakultet strojarstva i brodogradnje Zagreb
Number of pages: 0
Author: Motika Romano
Degree level: Ph.D.
- Type of paper
: Mentorship
Title: Contribution for Improvement of Spiral Drill Cutting
Conditions
Faculty: Fakultet strojarstva i brodogradnje Zagreb
Number of pages: 0
Author: Nikolić Đurđica
Degree level: Ph.D.
- Type of paper
: Mentorship
Title: Efficiency Optimization of Wood Machining by Multispindle
Milling Machines
Faculty: Fakultet strojarstva i brodogradnje Zagreb
Number of pages: 0
Author: Risović Stjepan
Degree level: M.A.
- Type of paper
: Mentorship
Title: Influence of Grinding Wheel Contact Length to Roughness of
Grinding Surface
Faculty: Fakultet strojarstva i brodogradnje Zagreb
Date of defense: 12/02/93
Number of pages: 111
Author: Ciglar Damir
Degree level: M.A.
- Type of paper
: Mentorship
Title: GENERATING OF FUNCTIONAL STRUCTURE OF AUTOMATED ASSEMBLY
SYSTEMS
Faculty: Fakultet strojarstva i brodogradnje Zagreb
Mentor: VRANJEŠ BOŽO
Date of defense: 03/20/92
Number of pages: 107
Author: Kunica Zoran
Degree level: M.A.
- Type of paper
: Mentorship
Title: CAD MODEL GEOMETRY INTERPRETATION IN PLANNING OF AUTOMATED
ASSEMBLY BY EXPERT SYSTEM
Faculty: Fakultet strojarstva i brodogradnje Zagreb
Mentor: VRANJEŠ BOŽO
Date of defense: 05/27/93
Number of pages: 171
Author: Jerbić Bojan
Degree level: Ph.D.
- Type of paper
: Mentorship
Title: Heat Diffussion Proces Boriding of Steels
Faculty: Fakultet strojarstva i brodogradnje Zagreb
Mentor: STUPNIŠEK MLADEN
Date of defense: 09/15/92
Number of pages: 91
Author: Matijević Božidar
Degree level: M.A.
- Type of paper
: Mentorship
Title:
Faculty: Fakultet strojarstva i brodogradnje Zagreb
Mentor: ESIH IVAN
Number of pages: 148
Author: Pllana dipl. ing. Vehbi
Degree level: M.A.
- Type of paper
: Mentorship
Title:
Faculty: Tehnološki fakultet Zagrebačko
Mentor: ESIH IVAN
Number of pages: 105
Author: Jurac Zlatko
Degree level: M.A.
- Type of paper
: Mentorship
Title:
Faculty: Fakultet kemijskog inženjerstva i tehnologije Zagreb
Mentor: ESIH IVAN
Author: Štambuk Maja
Degree level: M.A.
- Type of paper
: Mentorship
Title:
Faculty: Fakultet strojarstva i brodogradnje Zagreb
Mentor: POVRZANOVIĆ ALEKSANDAR
Date of defense: 06/28/94
Number of pages: 164
Author: Ćosić Predrag
Degree level: Ph.D.
- Type of paper
: Mentorship
Title:
Faculty: Fakultet strojarstva i brodogradnje Zagreb
Mentor: POVRZANOVIĆ ALEKSANDAR
Date of defense: 02/23/95
Number of pages: 199
Author: Grizelj dr.sc Branko
Degree level: Ph.D.
- Type of paper
: Mentorship
Title: Influence of Working Parmetars on the feeding Efficiency
of Castings
Faculty: Fakultet strojarstva i brodogradnje Zagreb
Mentor: BONAČIĆ-MANDINIĆ ZORAN
Date of defense: 06/30/94
Number of pages: 99
Author: Momčinović Davor
Degree level: M.A.
- Type of paper
: Mentorship
Title: Beitrag zur Kenntnis des Blasenbildungsmechanismus in den
Abguessen
Faculty: Fakultet strojarstva i brodogradnje Zagreb
Mentor: BONAČIĆ-MANDINIĆ ZORAN
Date of defense: 09/22/94
Number of pages: 294
Author: Budić Ivan
Degree level: Ph.D.
- Type of paper
: Mentorship
Title:
Faculty: Fakultet strojarstva i brodogradnje Zagreb
Mentor: VRANJEŠ BOŽO
Date of defense: 06/24/94
Number of pages: 97
Author: Bilić Boženko
Degree level: M.A.
- Type of paper
: Mentorship
Title: The Charecteristics Properties Processing of Materials by
High Temperature Thermomechanical Processing
Faculty: Metalurški fakultet, Sisak Zagreb
Mentor: MAMUZIĆ ILIJA
Date of defense: 02/20/95
Number of pages: 157
Author: Križanić Rade
Degree level: Ph.D.
- Type of paper
: Computer program
Title: MOULDEXPERT 92
- Authors:
- Slavica, Mladen
- Šercer, Mladen (77160)
- Čatić, Igor (7792)
Institution depot: Fakultet strojarstva i brodogradnje
HW platform: PC 386
Operating system: DOS
Programming language: CLIPPER
Year: 1992
- Type of paper
: Computer program
Title: TREND
- Authors:
- Šercer, Mladen (77160)
- Perković, Domagoj
Institution depot: Fakultet strojarstva i brodogradnje
HW platform: PC 386
Operating system: DOS
Programming language: C
Year: 1993
- Type of paper
: Computer program
Title: PROKUM
- Authors:
- Kiš, Donald (173774)
- Martinez, Vedran
Institution depot: Fakultet strojarstva i brodogradnje
HW platform: PC 386
Operating system: DOS
Programming language: C
Year: 1993
- Type of paper
: Computer program
Title: HEFEST
- Authors:
- Slavica, Mladen
- Čatić, Igor (7792)
Institution depot: Fakultet strojarstva i brodogradnje
HW platform: PC 386
Operating system: DOS
Programming language: CLIPPER
Year: 1993
- Type of paper
: Computer program
Title: Database of Fault Causes on Thermoforming Parts
- Authors:
- Čatić, Igor (7792)
- Travica, Ozren
Institution depot: Fakultet strojarstva i brodogradnje
HW platform: PC 386
Operating system: DOS
Programming language: Pascal
Year: 1992
- Type of paper
: Computer program
Title: EKSPO
- Authors:
- Oroz, Srećko
- Šercer, Mladen (77160)
- Reschner, Alfred
Institution depot: Fakultet strojarstva i brodogradnje
HW platform: PC 386
Operating system: DOS
Programming language: Basic
Year: 1991
- Type of paper
: Computer program
Title: META
- Authors:
- Čatić, Igor (7792)
- Gemić, Dražen
Institution depot: Fakultet strojarstva i brodogradnje
HW platform: PC 386
Operating system: DOS
Programming language: Pascal
Year: 1991
- Type of paper
: Computer program
Title: Part position in mould cavity
- Authors:
- Čatić, Igor (7792)
- Gemić, Dražen
Institution depot: Fakultet strojarstva i brodogradnje
HW platform: PC
Operating system: DOS
Programming language: C
- Type of paper
: Computer program
Title: Stress Analysis in Contact Rolling
- Authors:
- Ćosić, Predrag (94833)
- Krenčić, Danko
Institution depot: FSB-ZG, Zavod za tehnologiju, Katedra za oblikovanje metala deformiranjem
HW platform: PC 386DX-40MHz/8MB/120MB
Operating system: DOS 5.0
Programming language: Turbo Pascal 5.0
Year: 1993
Summary: The influence of the controling variables (rolling speed,
backtension), determined variables (foil width, work roll radius,kinematic
viscosity, additive percentage in lubricant, work rollroughness and true
strain) and accidental variables (roughnessand flatness of the foil) on the
stress state in thedeformation zone of rolling process has been considered
in thesoftware product.
Keywords: Contact rolling, Stress distribution
Other: Program je nastao u toku istraživanja na projektu i nema
posebnognaručioca.
- Type of paper
: Computer program
Title: Slab Method - Rotational-Symetric Forging
- Authors:
- Ćosić, Predrag (94833)
Institution depot: FSB-ZG, Zavod za tehnologiju, Katedra za oblikovanje metala deformiranjem
HW platform: PC 386SX-16MHz/2MB/40MB
Operating system: DOS 5.0
Programming language: Turbo Basic 1.1
Year: 1991
Summary: Using the slab method the software gives the possibility
toestablish the significance of action of observed factors asinclination
angle of dies, fillet radius, flash thickness andcoefficient of friction on
the stress distribution in forging andshape-difficulty factor.
Keywords: Slab method, Rotational-symetric forging
Other: Program je nastao kao rezultat istraživanja na projektu i
nemaposebnog naručioca.
- Type of paper
: Computer program
Title: NC-SIM
Odering party: Tvornica plinskih turbina
Institution depot: Tvornica plinskih turbina
HW platform: PC (osobna) računala
Operating system: MS DOS
Programming language: C++
Year: 1993
Summary: This program enables aimulation of tool path for manualy
preparedprograms for CNC lathes. As input it accepts a manualy
writenprogram according to ISO 1056 or DIN 66025. It also containesdata
base for standard turning tools (in graphical form). Forbetter presentation
of row part and finish part, it has a modulefor accepting DXF format.
Keywords: CNC lathes, manual programming, simulation
- Type of paper
: Computer program
Title: PROGRAMME PACKAGE FOR MANUFACTURING SYSTEM PLANNING PPS
- Authors:
- Vranješ, Božo (53161)
- Jerbić, Bojan (121164)
- Kunica, Zoran (162390)
- Lisičar, Josip (52193)
- Gregurić, Goran
Odering party: RH - MINISTARSTVO ZNANOSTI I TEHNOLOGIJE
Institution depot: Fakultet strojarstva i brodogradnje
HW platform: VAX 8530, DECstation3100
Operating system: VMS, UNIX
Programming language: FORTRAN, Pascal
Year: 1991
Other: 47 modula, 9800 redova, priručnik 101 stranica
- Type of paper
: Computer program
Title: GPP - PROGRAMME PACKAGE FOR PROCESS PLAN GENERATING OF
AUTOMATED ASSEMBLY
- Authors:
- Kunica, Zoran (162390)
Odering party: RH - MINISTARSTVO ZNANOSTI I TEHNOLOGIJE
Institution depot: Fakultet strojarstva i brodogradnje
HW platform: PC
Operating system: DOS
Programming language: Prolog
Year: 1992
Other: 7 modula, 1011 redova, priručnik 16 stranica
- Type of paper
: Computer program
Title: PROGRAM FOR INTEGRATION OF PROGRAM PACKAGE FOR
MANUFACTURING SYSTEM PLANNING PPS AND CAD SYSTEM
- Authors:
- Vranješ, Božo (53161)
- Jerbić, Bojan (121164)
- Gregurić, Goran
Odering party: RH - MINISTARSTVO ZNANOSTI I TEHNOLOGIJE
Institution depot: Fakultet strojarstva i brodogradnje
HW platform: DECstation 3100, VAX 8530
Operating system: UNIX
Programming language: I-DEAL
Year: 1992
Other: 2 modula, 250 redova
- Type of paper
: Computer program
Title: VISUALISATION OF CAD GEOMETRY INTERPRETATION RESULTS
- Authors:
- Jerbić, Bojan (121164)
Odering party: RH - MINISTARSTVO ZNANOSTI I TEHNOLOGIJE
Institution depot: Fakultet strojarstva i brodogradnje
HW platform: DECstation 3100
Operating system: UNIX
Programming language: C
Year: 1993
Other: 34 modula, 3200 redova
- Type of paper
: Computer program
Title: SYSTEM FOR PLAN GENERATING OF AUTOMATED ASSEMBLY
- Authors:
- Kunica, Zoran (162390)
- Ezgeta, Tonći
Odering party: RH - MINISTARSTVO ZNANOSTI I TEHNOLOGIJE
Institution depot: Fakultet strojarstva i brodogradnje
HW platform: DECstation3100
Operating system: UNIX
Programming language: I-DEAL
Year: 1993
Other: 5 modula, 1400 redova
- Type of paper
: Computer program
Title: PROGRAM FOR ORIENTING DEVICE DESIGN
- Authors:
- Vrtodušić, Dražen
Odering party: RH - MINISTARSTVO ZNANOSTI I TEHNOLOGIJE
Institution depot: Fakultet strojarstva i brodogradnje
HW platform: DECstation3100
Operating system: UNIX
Programming language: C
Year: 1993
Other: 1 modul, 800 redova
- Type of paper
: Computer program
Title:
- Authors:
- Slavica, Mladen
- Šercer, Mladen (77160)
- Čatić, Igor (7792)
Institution depot: Fakultet strojarstva i brodogradnje
Operating system: DOS
Year: 1994
- Type of paper
: Computer program
Title: FORMEX
Institution depot: Fakultet strojarstva i brodogradnje
HW platform: PC 386
Operating system: DOS
Programming language: CLIPPER
Year: 1995
- Type of paper
: Survey/Study
Title: Evaluation of Extrusion Line in Vinilplastika
- Authors:
- Čatić, Igor (7792)
Ordering party: Okružni sud
Institution depot: Fakultet strojarstva i brodogradnje
Year: 1993
Number of pages: 0
- Type of paper
: Survey/Study
Title: Reseaching Result Applied on rolling conditions of strips
in strip and billet rolling mill Željezara Sisak
- Authors:
- Križanić, Rade (23663)
- Mamuzić, Ilija (27862)
- Nikolić, Đurđica (82990)
Ordering party: Valjaonica traka i gradica Željezara Sisak
Institution depot: Valjaonica traka i gradica Željezara Sisak
Year: 1991
Number of pages: 58
Summary: Technological process of strip rolling in strip, billet
andseamless tube rolling mill in Željezara Sisak are defined. It
wasestablishmed that the most favorable conditions are acheavedwhile
rolling the strips in 6 rolling mill stands.
Keywords: Roling of strips and billets, bainit steels, deformation resistence, deformation, rolling programme
- Type of paper
: Survey/Study
Title: Results of Research on Torsion Plastometer Conditions of
Construction Bainit Steel H-75
- Authors:
- Mamuzić, Ilija (27862)
Ordering party: Valjaonica traka i gradica Željezara Sisak
Institution depot: Istraživačko razvojni institut, Željezara Sisak
Year: 1991
Number of pages: 60
Summary: The investigating results of steel, grade H-75,
deformationresistance obtained on torsion plastometer, formulas
forcalculation and tehnological conditions for performing of rollingprocess
on continuous train in Željezara Sisak in Sisak areshown.
Keywords: Torsion Plastometer, Construction Steel, Bainit Steel, Deformation Resistance
- Type of paper
: Survey/Study
Title:
- Authors:
- Čatić, Igor (7792)
- Šercer, Mladen (77160)
Ordering party: Croatia osiguranje
Institution depot: Fakultet strojarstva i brodogradnje
Year: 1991
- Type of paper
: Survey/Study
Title: Rolling of Stripes and Pipes with Higher Quality
Requirements
- Authors:
- Križanić, Rade (23663)
Ordering party: Željezara Sisak "METAVAL" d.o.o. Sisak
Institution depot: Željezara Sisak, Sektor za razvoj
Year: 1995
Number of pages: 99
- Type of paper
: Technical report
Title: Symposium of Croatian Metallurgists
- Authors:
- Hensel, Arno
- Mamuzić, Ilija (27862)
Ordering party: Hrvatsko metalurško društvo
Institution depot: Hrvatsko metalurško društvo
Year: 1994
- Type of paper
: Technical report
Title: 2nd International Symposium of Croatian Metallurgists
- Authors:
- Mamuzić, Ilija (27862)
Ordering party: Hrvatsko metalurško društvo
Institution depot: Hrvatsko metalurško društvo
Year: 1995
- Type of paper
: Project
Title:
- Authors:
- Vranješ, Božo (53161)
- Jerbić, Bojan (121164)
- Lisičar, Josip (52193)
- Kunica, Zoran (162390)
- Krznar, Marko
- Jurjević, Jadranko
Ordering party: KONČAR - MALI KUĆANSKI APARATI
Institution depot: Fakultet strojarstva i brodogradnje
Year: 1991
Number of pages: 342
- Type of paper
: Project
Title: DEVELOPMENT OF AUTOMATIC ASSEMBLY SYSTEM FOR TERMINAL
BLOCKS NER 25131 AND 25141
- Authors:
- Vranješ, Božo (53161)
- Jerbić, Bojan (121164)
- Kunica, Zoran (162390)
- Vrtodušić, Dražen
- MEDVEDEC, NEDELJKO
Ordering party: ERICSSON NIKOLA TESLA
Institution depot: Fakultet strojarstva i brodogradnje
Year: 1995
- Type of paper
: Project
Title: COOPERATION ON DEVELOPMENT OF MOLDING TOOL AND STAFF
TRAINING CAD/CAM EQUIPMENT
- Authors:
- Jerbić, Bojan (121164)
- Kunica, Zoran (162390)
- Vrtodušić, Dražen
Ordering party: ERICSSON NIKOLA TESLA
Institution depot: Fakultet strojarstva i brodogradnje
Year: 1994
Number of pages: 41
- Type of paper
: Project
Title: LAYOUT PLANNING OF THE SYSTEM FOR TRANSFORMER TANK
PRODUCTION
- Authors:
- Kunica, Zoran (162390)
- Pongrac, Stjepan
Institution depot: Fakultet strojarstva i brodogradnje
Year: 1995
Number of pages: 40
- Type of paper
: Project
Title: PROJECT OF THE CENTRAL LIBRARY OF THE FACULTY OF
MECHANICAL ENGINEERING AND NAVAL ARCHITECTURE, UNIVERSITY OF ZAGREB
- Authors:
- Vranješ, Božo (53161)
- Kunica, Zoran (162390)
- Jerbić, Bojan (121164)
Ordering party: Fakultet strojarstva i brodogradnje
Institution depot: Fakultet strojarstva i brodogradnje
Year: 1995
- Type of paper
: New product
Title: Circulating pump for aggressive media made from heigh
alloyed steel casting
- Authors:
- Tounec, Sonja (82975)
- Unkić, Faruk (57790)
Approved by institution: Organizacioni odbor INOVE'93, 2. Hrvatskog salona inovacija (Zlatna plaketa)
Institution depot: Željezara Sisak - IRI d.o.o., Ispitivanje kakvoće materijala
Date of approval: 05/23/93
- Type of paper
: Radio broadcast
Title: Theology and Technology
- Authors:
- Čatić, Igor (7792)
Radio station: Hrvatski radio, III program
Name of emission (broadcast): Eppour si muove
Year: 1991
- Type of paper
: Radio broadcast
Title: Trilingual Polymer Engineering Dictionary
- Authors:
- Čatić, Igor (7792)
Radio station: Hrvatski radio, III program
Name of emission (broadcast): Eppour si muove
Year: 1991
- Type of paper
: Radio broadcast
Title: What Sciences Interlace Material and Spiritual Culture?
- Authors:
- Čatić, Igor (7792)
Radio station: Hrvatski radio, III program
Name of emission (broadcast): Eppour si muove
Year: 1992
- Type of paper
: Radio broadcast
Title: Founding of the Croatian Humboldt Club
- Authors:
- Čatić, Igor (7792)
Radio station: Hrvatski radio, III program
Name of emission (broadcast): Eppour si muove
Year: 1992
- Type of paper
: Radio broadcast
Title: Polymer Engineering in Germany
- Authors:
- Čatić, Igor (7792)
Radio station: Hrvatski radio, III program
Name of emission (broadcast): Eppour si muove
Year: 1992
- Type of paper
: Radio broadcast
Title: Ecological Aspects of Polymer Engineering
- Authors:
- Čatić, Igor (7792)
Radio station: Hrvatski radio, III program
Name of emission (broadcast): Eppur si muove
Year: 1993
- Type of paper
: Radio broadcast
Title: Some Questions of Application of Polymers and their
Ecological Aspect
- Authors:
- Čatić, Igor (7792)
Radio station: Hrvatski radio, I program
Year: 1993
- Type of paper
: Radio broadcast
Title: The Ecological Forum
- Authors:
- Čatić, Igor (7792)
- Klasinc, L.
Radio station: Hrvatski radio, III program
Name of emission (broadcast): Forum III. programa Hrvatskog radija
Year: 1993
- Type of paper
: Radio broadcast
Title: The Position of Plastics and Recycling
- Authors:
- Čatić, Igor (7792)
- Švob, A.
Radio station: Hrvatski radio, postaja Sljeme
Year: 1993
- Type of paper
: Radio broadcast
Title: ASSEMBLY - THE FINAL ACTIVITY IN PRODUCTION OF COMPLEX
PRODUCTS
- Authors:
- Vranješ, Božo (53161)
Radio station: HRTV - Radio postaja Zagreb 3
Name of emission (broadcast): EPUR SI MUOVE
Year: 1991
- Type of paper
: Radio broadcast
Title: Production, where are you going?
- Authors:
- Čatić, Igor (7792)
Radio station: Hrvatski radio, III program
Year: 1994
- Type of paper
: Radio broadcast
Title: Scientific Magazines in Croatia
- Authors:
- Čatić, Igor (7792)
Radio station: Hrvatski radio, III program
Name of emission (broadcast): Forum III. programa Hrvatskog radija
Year: 1995
- Type of paper
: Radio broadcast
Title: Twenty five years of Society of Plastics and Rubber
Engineers
- Authors:
- Čatić, Igor (7792)
Radio station: Hrvatski radio, III program
Name of emission (broadcast): Forum
Year: 1995
- Type of paper
: TV broadcast
Title: Production Engineers and Reconstruction
- Authors:
- Čatić, Igor (7792)
TV station: Hrvatska televizija
Year: 1991
- Type of paper
: TV broadcast
Title: The Strategy of Croatian Development
- Authors:
- Čatić, Igor (7792)
TV station: Hrvatska televizija
Name of emission (broadcast): Znanstveno zborište
Year: 1992
- Type of paper
: TV broadcast
Title:
- Authors:
- Čatić, Igor (7792)
TV station: Hrvatska televizija
Name of emission (broadcast): TV-mislilište
Year: 1995
- Type of paper
: Manuscript
Title: ECOLOGY IN THE CONTEMPORARY PRODUCTION
- Authors:
- Mikšić, Dragutin (57176)
- Type of paper
: Manuscript
Title: THE ELEMENTS OF ECOLOGICAL CONSCIONSNESS OF STUDENT
- Authors:
- Dubreta, Nikša (172332)
- Šućur, Zoran
- Type of paper
: Manuscript
Title: ALTERNATIVE WORKING FORMS IN INTEGRATED MANUFACTURING
- Authors:
- Mikšić, Dragutin (57176)
- Type of paper
: Manuscript
Title: CONTRIBUTION TO PLAN GENERATING FOR AUTOMATIC ASSEMBLY
- Authors:
- Kunica, Zoran (162390)
- Type of paper
: Manuscript
Title: Introduction to Ergonomics
- Authors:
- Mikšić, Dragutin (57176)
- Type of paper
: Manuscript
Title: Man and Work II
- Authors:
- Mikšić, Dragutin (57176)
- Type of paper
: Invited lecture
Title:
Institution: Institut fuer Kunstoffverarbeitung
Year: 1993
- Type of paper
: Invited lecture
Title:
Institution: Plagkem '95
Year: 1995
- Type of paper
: Invited lecture
Title:
Institution: Društvo plastičara i gumaraca, 10. dani DPG-a
Year: 1992
- Type of paper
: Invited lecture
Title:
Institution: Društvo plastičara i gumaraca, 11. dani DPG-a
Year: 1993
- Type of paper
: Invited lecture
Title:
Institution: DPG, Konstruiranje i izradba kalupa za preradbu polimera postupcima prešanja
Year: 1994
- Type of paper
: Invited lecture
Title:
Institution: Društvo plastičara i gumaraca, 8. savj. Vlaknima ojačani polimerni kompoziti
Year: 1994
- Type of paper
: Invited lecture
Title:
Institution: 12. BIAM
Year: 1994
- Type of paper
: Invited lecture
Title:
Institution: Hrvatsko društvo za materijale i tribologiju
Year: 1994
- Type of paper
: Invited lecture
Title: Injection Moulding
Institution: DPG, Konstruiranje i izradba kalupa za preradbu polimera postupcima prešanja
Year: 1994
- Type of paper
: Invited lecture
Title:
Institution: DPG, Konstruiranje i izradba kalupa za preradbu polimera postupcima prešanja
Year: 1994
- Type of paper
: Invited lecture
Title:
Institution: Hrvatsko farmaceutsko društvo i DPG, Ekološki podobna ambalaža
Year: 1994
- Type of paper
: Invited lecture
Title:
Institution: Hrvatsko društvo za sustave
Year: 1994
- Type of paper
: Invited lecture
Title:
Institution: Klub hrvatskih humboldtovaca
Year: 1994
- Type of paper
: Invited lecture
Title:
Institution: Hrvatsko društvo za sustave
Year: 1994
- Type of paper
: Invited lecture
Title:
Institution: Hrvatsko kemijsko društvo
Year: 1994
- Type of paper
: Invited lecture
Title:
Institution: Tehnički muzej
Year: 1994
- Type of paper
: Invited lecture
Title:
Institution: Društvo kemijskih inženjera i tehnologa Hrvatske, 4. simpozij o kemiji i tehnologiji makromolekula
Year: 1995
- Type of paper
: Invited lecture
Title:
Institution: Građevinski fakultet, 2. savjetovanje Društvo i tehnologija
Year: 1995
- Type of paper
: Invited lecture
Title:
Institution: DIT
Year: 1995
- Type of paper
: Invited lecture
Title:
Institution: Društvo polimerijskih inženjera
Year: 1995
- Type of paper
: Invited lecture
Title:
Institution: Strojarski fakultet
Year: 1995
- Type of paper
: Invited lecture
Title: Quality Assurance of Polymeric Parts
Institution: DPG, 1. savjetovanje Jamstvo kakvoće u polimerstvu
Year: 1994
- Type of paper
: Invited lecture
Title:
Institution: 12. BIAM
Year: 1994
- Type of paper
: Invited lecture
Title:
Institution: Savjetovanje Elektrokemija u metalurgiji, ljevarstvu i toplinskoj obradi Jurema
Year: 1991
- Type of paper
: Invited lecture
Title:
Institution: Savjetovanje proizvodnog strojarstva, Hrvatska zajednica proizvodnog strojarstva
Year: 1992
- Type of paper
: Invited lecture
Title: Assembly Automation
Institution: 2. međunarodno savjetovanje CIM '93
Year: 1993
- Type of paper
: Invited lecture
Title: Location Choosing and Layout Defining
Institution: Zagrebačka poslovna škola
Year: 1992
- Type of paper
: Invited lecture
Title: Today's Production Systems and Their Planning
Institution: Hrvatska gospodarska komora, Seminar Logističko-informatički pristup org. proizvodnje
Year: 1993
- Type of paper
: Other
Title: Profit for Company, Catastrophy for Society
- Authors:
- Čatić, Igor (7792)
Type of work: Znanstveno-popularizacijski članak u Vjesniku, 13.05.1991.
- Type of paper
: Other
Title: Production with Risk Trap
- Authors:
- Čatić, Igor (7792)
Type of work: Znanstveno-popularizacijski članak u Vjesniku, 20.05.1991.
- Type of paper
: Other
Title: Steel Looses the Race
- Authors:
- Vukotić, Hrvoje
- Čatić, Igor (7792)
Type of work: Znanstveno-popularizacijski članak u Vjesniku, 17.09.1992.
- Type of paper
: Other
Title: Plastics that will still be driven
- Authors:
- Vukotić, Hrvoje
- Čatić, Igor (7792)
Type of work: Znanstveno-popularizacijski članak u Vjesniku, 24.09.1992.
- Type of paper
: Other
Title: Sample and Specimen
- Authors:
- Čatić, Igor (7792)
Type of work: Napis u časopisu Polimeri, 13(1992)5, 171
- Type of paper
: Other
Title: They Create Mass Hysteria
- Authors:
- Čatić, Igor (7792)
- Šercer, Mladen (77160)
Type of work: Znanstveno-popularizacijski članak u Vjesniku, 06.05.1993.
- Type of paper
: Other
Title: Eco-Brahmans Punish Industrial Caste
- Authors:
- Čatić, Igor (7792)
Type of work: Znanstveno-popularizacijski članak u Vjesniku, 17.05.1993.
- Type of paper
: Other
Title: From Idea to Finished Product
- Authors:
- Čatić, Igor (7792)
Type of work: Napis u časopisu Polimeri, 14(1993)6, 236-238
- Type of paper
: Other
Title: Life is somewhere else on technical studies
- Authors:
- Čatić, Igor (7792)
- Taboršak, Dragutin
Type of work: Znanstveno-popularizacijski članak u Vjesniku, 22.12.1993.
- Type of paper
: Other
Title: Thirty years later
- Authors:
- Čatić, Igor (7792)
Type of work: Članak o stručnoj terminologiji, Polimeri 13(1992)2, 61
- Type of paper
: Other
Title: Technology isn't everything
- Authors:
- Čatić, Igor (7792)
Type of work: Članak o stručnoj termonologiji, Vjesnik-Danica, 18.12.1993.
- Type of paper
: Other
Title: Polymer Engineering Dictionary
- Authors:
- Čatić, Igor (7792)
- Čatić, Ranka
- Kostial-Štambuk, Aleksandra
- Jarm, Vida
Type of work: Članci o stručnoj terminologiji, Polimeri 13(1992), 14(1993), 15(1994), 16(1995)
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Komentar u časopisu Polimeri, 14(1993)2, 44
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Komentar u EGE Energetika, okoliš, etika, 1(1993)4, 32-33
- Type of paper
: Other
Title:
- Authors:
- Mamuzić, Ilija (27862)
Type of work: Napis u časopisu Metalurgija, 31(1991)1, 57-61
- Type of paper
: Other
Title:
- Authors:
- Mamuzić, Ilija (27862)
Type of work: Napis u časopisu Metalurgija 32(1993)1/2, 55-56
- Type of paper
: Other
Title:
- Authors:
- Mamuzić, Ilija (27862)
Type of work: Napis u časopisu Metalurgija, 32(1993)4, 122
- Type of paper
: Other
Title: G. Boothroyd, P. Dewhurst: DESIGN FOR ASSEMBLY - A
DESIGNER'S HANDBOOK, University of Massachusetts, Amherst, 1983
- Authors:
- Kunica, Zoran (162390)
Type of work: Prijevod, preradba i priprema za tisak knjige.
- Type of paper
: Other
Title:
- Authors:
- Vranješ, Božo (53161)
Type of work: Prikaz knjige objavljen u časopisu POLIMERI, 14 (1993), 4, str.193.
- Type of paper
: Other
Title:
- Authors:
- Vranješ, Božo (53161)
- Jerbić, Bojan (121164)
- Kunica, Zoran (162390)
Type of work: Definiran, ali neostvaren projekt u sklopu TEMPUS-PHARE programa.22 stranice
- Type of paper
: Other
Title: Technique of playing the trumpet
- Authors:
- Čatić, Igor (7792)
Type of work: Znanstveno-popularizacijski članak u Vjesniku-Danica , 07.05.1994.
- Type of paper
: Other
Title: Thirty three years later
- Authors:
- Čatić, Igor (7792)
Type of work: Članak o stručnoj terminologiji, Polimeri 16(1995)2, 80
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: urednik zbornika
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: urednik časopisa Polimeri 13(SUPPL 1) 1-94 (1992), 1. dio
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: urednik Zbornika sažetaka, 1993.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: gost urednik
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: gost urednik
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: urednik Zbornika proširenih sažetaka, 1994.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: recenzija monografije
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: recenzija monografije
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: recenzija monografije
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: recenzija monografije
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: recenzija monografije
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: recenzija monografije
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: recenzija monografije
- Type of paper
: Other
Title: Let's buy the new knowlwdge
- Authors:
- Čatić, Igor (7792)
Type of work: Znanstveno-popularizacijski članak u Vjesniku, 30.01.1992.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Znanstveno-popularizacijski članak u Vjesniku, 19.11.1992.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Znanstveno-popularizacijski članak u Vjesniku, 14.01.1993.
- Type of paper
: Other
Title: Culture on top of the pyramid
- Authors:
- Čatić, Igor (7792)
Type of work: Znanstveno-popularizacijski članak u Večernjem listu, 01.1993.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Znanstveno-popularizacijski članak u Vjesniku, 05.01.1994.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Znanstveno-popularizacijski članak u Vjesniku, 06.01.1994.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Znanstveno-popularizacijski članak u Vjesniku, 28.01.1994.
- Type of paper
: Other
Title: Dangerous hole in Montreal Protocol
- Authors:
- Čatić, Igor (7792)
Type of work: Znanstveno-popularizacijski članak u Vjesniku, 10.04.1994.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Znanstveno-popularizacijski članak u Privrednom vjesniku, 07.11.1994.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Znanstveno-popularizacijski članak u Vjesniku, 09.02.1995.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Znanstveno-popularizacijski članak u Vjesniku, 18.03.1995.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Znanstveno-popularizacijski članak u Vjesniku, 05.06.1995.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Znanstveno-popularizacijski članak u Vjesniku, 06.06.1995.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Znanstveno-popularizacijksi članak u Vjesniku, 21. i 22. lipnja 1995.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Znanstveno-popularizacijksi članak u Vjesniku, 14.07.1995.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Znanstveno-popularizacijski članak u Vjesniku, 29.08.1995.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 12(1991)1-2, 45.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 12(1991)1-2, 45.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 12(1991)1-2, 45.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 12(1991)3-4, 83.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 12(1991)3-4, 83.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 12(1991)3-4, 83.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 12(1991)9-12, 134.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 12(1991)9-12, 134.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 13(1992)1, 2.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 13(1992)1, 27.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 13(1992)1, 27.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 13(1992)1, 27.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige , Polimeri 13(1992)1, 30.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 13(1992)1, 30.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 13(1992)5, 146.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 13(1992)5, 173.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 13(1992)6, 214.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 14(1993)1, 31.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 14(1993)2, 74.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 14(1993)5, 216.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 14(1993)5, 216.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 14(1993)5, 216.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 148199395, 216.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 14(199395, 216.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 14(1993)5, 224.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 14(1993)5, 233.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 14(1993)5, 233.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 14(1993)5, 233.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 15(1994)2, 58.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 15(1994)2, 58.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 15(194493, 88.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 15(199493, 88.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 15(1994)5, 152.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 15(1994)5, 152.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 15(1994)5, 152.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Croatica Chemica Acta 67(1994)3, A27-28.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 16(1995)1, 31.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 16(1995)1, 31.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 16(1995)1, 31.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 16(1995)1, 31.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
- Čatić, Ranka
Type of work: Prikaz knjige, Polimeri 16(1995)1, 32.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Prikaz knjige, Polimeri 16(1995)1, 32.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
- Čatić, Ranka
Type of work: Prikaz knjige, Polimeri 16(1995)1, 32.
- Type of paper
: Other
Title:
- Authors:
- Barić, Gordana
Type of work: Prikaz knjige, Polimeri 16(1995)3, 136.
- Type of paper
: Other
Title:
- Authors:
- Barić, Gordana
Type of work: Prikaz knjige, Polimeri 16(1995)3, 136.
- Type of paper
: Other
Title:
- Authors:
- Barić, Gordana
Type of work: Prikaz knjige, Polimeri 16(1995)3, 136.
- Type of paper
: Other
Title:
- Authors:
- Barić, Gordana
Type of work: Javno predavanje, DPG, DPI i Katedra za preradu polimera, 15.05.1995.
- Type of paper
: Other
Title:
- Authors:
- Rujnić-Sokele, Maja
- Šercer, Mladen (77160)
Type of work: Prikaz izložbe
- Type of paper
: Other
Title:
- Authors:
- Rujnić-Sokele, Maja
Type of work: Prikaz knjige, Polimeri 15(1994)2, 58.
- Type of paper
: Other
Title:
- Authors:
- Rujnić-Sokele, Maja
Type of work: Prikaz knjige, Polimeri 16(1995)2, 71.
- Type of paper
: Other
Title:
- Authors:
- Rujnić-Sokele, Maja
Type of work: Napis u časopisu Polimeri 16(1995)2, 63-64.
- Type of paper
: Other
Title:
- Authors:
- Širović, Ivan (106834)
- Rujnić-Sokele, Maja
Type of work: Napis u časopisu Polimeri 16(1995)3, 125-127.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Napis u časopisu Polimeri 13(1992)(suppl 1), 1.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
- Čatić, Ranka
- Kiš, Donald (173774)
- Raos, Pero (121221)
- Šercer, Mladen (77160)
Type of work: Prikaz izložbe u časopisu Polimeri 13(1992)6, 203-211.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Napis u časopisu Polimeri 13(1992)6, 212-214.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
- Čatić, Ranka
Type of work: Napis u časopisu Polimeri 14(1993)2, 74.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Napis u časopisu Polimeri 15(1994)1, 29.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Napis u časopisu Polimeri 15(1994)1, 29-30.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
- Jelčić, Želimir
- Širović, Ivan (106834)
Type of work: Prikaz izložbe, Polimeri 15(1994)2, 93-97.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Napis u časopisu Strojarstvo 36(1994)3-4, 115-118.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Napis u časopisu Polimeri 15(1994)6, 224-229.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Napis u časopisu Polimeri 16(1995)1, 30.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
- Čatić, Ranka
Type of work: Napis u časopisu Polimeri 16(1995)1, 30.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Napis u časopisu Polimeri 16(1995)2, 67-68.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Komentar u časopisu Polimeri 12(1991)9-12, 134.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Komentar u časopisu Polimeri 13(1992)1, 2.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Komentar u časopisu Strojarstvo 35(1993)3-4, 95-96.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Komentar u časopisu Strojarstvo 35(1993)3-4, 168-169.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Komentar u časopisu Polimeri 15(1994)3, 72.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Komentar u časopisu Hrvatske vode 2(1994)5, 352-354.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Priprema za tisak, Polimeri 12(1991)3-4, 51-55.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Priprema za tisak, polimeri 12(1991)3-4, 56-61.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Priprema za tisak, Polimeri 12(1991)3-4, 56-61.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Priprema za tisak, Polimeri 12(1991)9-12, 152-154.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Priprema za tisak, Polimeri 13(1992)2, 32-37.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Priprema za tisak, Polimeri 13(1992)2, 32-37.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Priprema za tisak, Polimeri 13(1992)3, 69-74.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Priprema za tisak, Polimeri 13(1992)3, 97-100.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Priprema za tisak, Polimeri 13(1992)5, 174-176.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Priprema za tisak, Polimeri 14(1993)1, 7-12.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Priprema za tisak, Polimeri 14(1993)2, 50-55.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Priprema za tisak, Polimeri 14(1993)3, 106-108.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Priprema za tisak, Polimeri 14(1993)5, 207-213.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Priprema za tisak, Polimeri 15(1994)1, 11-16.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Priprema za tisak, Polimeri 15(1994)5, 153-160.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
Type of work: Priprema za tisak, Polimeri 15(1994)6, 220-223.
- Type of paper
: Other
Title:
- Authors:
- Čatić, Igor (7792)
- Žgombić, Aida
Type of work: Priprema za tisak, Polimeri 16(1995)3, 95-101.
- Type of paper
: Other
Title:
- Authors:
- Esih, Ivan (11364)
Type of work: Urednik i recenzent zbornika radova
- Type of paper
: Other
Title:
- Authors:
- Esih, Ivan (11364)
Type of work: Urednik zbirke referata
- Type of paper
: Other
Title: Analysis of Extrusion Process Control during Cable
Insulations Manufacturing
- Authors:
- Rujnić-Sokele, Maja
Type of work: Javno predavnaje, DPG, DPI i Katedra za preradu polimera, 21.02.1994.
- Type of paper
: Other
Title: Thermoplastic Elastomers
- Authors:
- Šercer, Mladen (77160)
Type of work: Javno predavanje na savjetovanju Injekcijsko prešanje, 1991.
- Type of paper
: Other
Title:
- Authors:
- Šercer, Mladen (77160)
Type of work: Glavni i odgovorni urednik znanstvene monografije
- Type of paper
: Other
Title:
- Authors:
- Šercer, Mladen (77160)
Type of work: Glavni i odgovorni urednik znanstvene monografije
- Type of paper
: Other
Title:
- Authors:
- Šercer, Mladen (77160)
Type of work: Prikaz knjige u časopisu Polimeri 12(1991)9-12, 158.
- Type of paper
: Other
Title:
- Authors:
- Šercer, Mladen (77160)
Type of work: Prikaz knjige u časopisu Polimeri 13(1992)1, 27.
- Type of paper
: Other
Title: Expert System for Removing Visible Faults on Injection
Mouldings
- Authors:
- Šercer, Mladen (77160)
Type of work: Predavanje na skupu Umjetna intelig. pri mjerenju i vođenju, CROSS, 05.11.1993.
- Type of paper
: Other
Title: TECHNICAL AND TECHNOLOGICAL DEVELOPMENT OF ASSEMBLY AND
CROATIAN INDUSTRY
- Authors:
- Vranješ, Božo (53161)
Type of work: Pozvano predavanje, BIAM 94
- Type of paper
: Other
Title: ASSEMBLY - A FIELD OF ACTUAL RATIONALISATIONS
- Authors:
- Vranješ, Božo (53161)
Type of work: Pozvano predavanje, Seminar Proizvodni sustavi 95, Split
- Type of paper
: Other
Title:
- Authors:
- Jerbić, Bojan (121164)
Type of work: Pozvano predavnaje, Rochester Institute of Technology, Rochester, USA
- Type of paper
: Other
Title: GEOMETRY REASONING BY COMPUTER
- Authors:
- Jerbić, Bojan (121164)
Type of work: Pozvano predavanje, Hrvatska akademija znanosti i umjetnosti, Zagreb
- Type of paper
: Other
Title: FROM IDEA OF A PRODUCT TO PRODUCTION SYSTEM
- Authors:
- Vranješ, Božo (53161)
- Jerbić, Bojan (121164)
- Kunica, Zoran (162390)
- Vrtodušić, Dražen
Type of work: Izložba povodom 75-te godiš. tehničkih fakulteta, Tehnički muzej, Zagreb, 1994.
- Type of paper
: Other
Title:
- Authors:
- Vranješ, Božo (53161)
- Jerbić, Bojan (121164)
- Kunica, Zoran (162390)
- Vrtodušić, Dražen
Type of work: Demonstracija računalne podrške, BIAM 94, Zagreb 94
- Type of paper
: Other
Title:
- Authors:
- Vranješ, Božo (53161)
- Jerbić, Bojan (121164)
- Kunica, Zoran (162390)
- Vrtodušić, Dražen
Type of work: Demonstracija računalne podrške, I. Memorijal F. Bošnjakovića, FSB, Zagreb 1994.
- Type of paper
: Other
Title: SYSTEM FOR INTEGRATED PLANNING OF AUTOMATIC ASSEMBLY
- Authors:
- Vranješ, Božo (53161)
- Jerbić, Bojan (121164)
- Kunica, Zoran (162390)
- Zubović, Dražen
Type of work: 1.kolokvij projekta Optimiranje integrirane proizvodnje tvorevina, FSB,ZG
- Type of paper
: Other
Title: SYSTEM FOR INEGRATED PLANNING OF AUTOMATIC ASSEMBLY
- Authors:
- Vranješ, Božo (53161)
- Jerbić, Bojan (121164)
- Kunica, Zoran (162390)
- Vrtodušić, Dražen
Type of work: 2.kolokvij projekta Optimiranje integrirane proizvodnje tvorevina, FSB, ZG
- Type of paper
: Other
Title:
- Authors:
- Mikšić, Dragutin (57176)
Type of work: Prikaz u časopisu Polimeri 16(1995)4
- Type of paper
: Other
Title:
- Authors:
- Esih, Ivan (11364)
Type of work: Prikaz knjige, Kemija u industriji 41(1992)9, 390-391.
- Type of paper
: Other
Title:
- Authors:
- Šavar, Šime (46185)
Type of work: mentorstvo doktorske disertacije
- Type of paper
: Other
Title:
- Authors:
- Motika, Romano (32503)
Type of work: doktorska disertacija, FSB, 22.02.1991. 131 str.
- Type of paper
: Other
Title:
- Authors:
- Ciglar, Damir (121120)
Type of work: magistarski rad, FSB, 02.12.1993. 111 str.
- Type of paper
: Other
Title:
- Authors:
- Cebalo, Roko (59430)
Type of work: mentorstvo doktorske disertacije