Published papers on project 2-08-400

• Book 1
  
• Paper in journal 5
  
• Paper in proceedings 8
  
• Ph.D. 1
  
• Mentorship 10
  

1. Type of paper: Book
   

   Title:
   

   Authors:

   Deželić, Romeo (9601)

   Year: 1995
   Number of pages: 150
   Language: hrvatski
   

   ---

2. Type of paper: Paper in journal
   

   Title: Substitution of Electric Energy by the Fossil Fuel in the Steel Production
   

   Authors:

   Deželić, Romeo (9601)

   Journal: Metalurgija
   Number: 32
   Volume: 4
   Year: 1993
   Pages: from 0 to 0
   Language: hrvatski
   Summary: This survey paper gives a special review of the energy electricare furnaces for the steel scrap melting. This problem is ofparticular interest in our condiditions of the electric energyshortage. To way of solving the problem is considered by thepartial or complete substitution of electric energy by the fossilfuel energy because it is the recent trend in the developedworld.
   Keywords: electric energy, fossil fuel, steel production, energy saving
   

   ---

3. Type of paper: Paper in journal
   

   Title: Influence of Graphite Electrodes Cooling on the Course of the Temperature Field in Them
   

   Authors:

   Deželić, Romeo (9601)

   Lozina, Željan

   Šušnjar, Marko

   Journal: Metalurgija
   Number: 32
   Volume: 4
   Year: 1993
   Pages: from 0 to 0
   Language: hrvatski
   Summary: Colling of the electric furmace electrodes is recommended becauseof the electrodes material economy. This paper analysses thetemperature field in the electrode with or without colling by thefinite elements method.Testing and analysis refer to the capacityof the electric are furance of 25 t.
   Keywords: graphite electrode, cooling, tempetature field
   

   ---

4. Type of paper: Paper in journal
   

   Title: Prediction of Mechanical Properties from the Chemical Composition of the Heat for the Reinforcings Bars
   

   Authors:

   Deželić, Romeo (9601)

   Baletić, Frane

   Pages: from 0 to 0
   

   ---

5. Type of paper: Paper in journal
   

   Title: Tribologic Processes of Cereal Transporting Pipeline Wear
   

   Authors:

   Živković, Dražen (44701)

   Journal: Strojarstvo
   Number: 6
   ISSN: 0562-1887
   Volume: 34
   Year: 1992
   Pages: from 225 to 228
   Number of references: 3
   Language: hrvatski
   Summary: This work deals with finding the solution of prolonging the lifetime of cereal transporting pipeline. The specimen material wereselected according to avaliability of materials, practicabilityand acceptability of cost. Weat and barley were used as workingmedium. The conclustion is that the most critical parts ofpipeline can be manufactured by non-alloyed steels, whichincludes improved surface resistance by hard facing.
   Keywords: cereal transporting, pipeline, surface resistance, transporter, tribology, unalloyed steels
   

   ---

6. Type of paper: Paper in journal
   

   Title:
   

   Authors:

   Deželić, Romeo (9601)

   Journal: Energija
   Number: 1
   ISSN: 0013-7448
   Year: 1994
   Pages: from 23 to 28
   Number of references: 10
   Language: hrvatski
   

   ---

7. Type of paper: Paper in proceedings
   

   Title: Possibility of reparing of cereal transporting pipline
   

   Authors:

   Živković, Dražen (44701)

   Editors

   Filetin, Tomislav

   Proceedings title: Tribologija u agroindustrijskom kompleksu
   Language: hrvatski
   Place: Osijek
   Year: 1993
   Pages: from 88 to 93
   Held: from 09/23/93 to 09/23/93
   Summary: This work deals with finding the solution of reparing of cerealtransporting pipeline. According to existing literature thisproblem has not been adequately treated, thus the above mentionedtribological problem has not been sufficiently explored. Theresearch was done under laboratory conditions. The specimensmaterials were selected according to availability of materials,practicability and acceptability of cost. Obtained research showsthat the most critical parts of pipeline can be manufactured bynon-alloyed steels, which includes improved surface resistance byhard facing.
   Keywords: cereal transporting pipeline, reparing, unalloyed steels
   

   ---

8. Type of paper: Paper in proceedings
   

   Title: The effect of heat treatment of welded joints microalloyed steel NIOVAL 50 on some mechanical properties
   

   Editors

   Cebalo, Roko

   Proceedings title: Suvremeni trendovi proizvodnog strojarstva
   Language: hrvatski
   Place: Zagreb
   Year: 1992
   Pages: from 19 to 26
   Meeting: Znanstveno stručno savjetovanje "Tribologija u agroindustrijskom kompleksu"
   Held: from 05/21/92 to 05/23/92
   Summary: Some results of investigations about mechanical properties of thesteel NIOVAL 50 weldments are presented. The welding processapplied the MAG procedure. In other to relieve the residualstresses, the annealing was done at 450, at 550 and 650 C.
   Keywords: welded joints, heat treatment, microalloyed steel
   

   ---

9. Type of paper: Paper in proceedings
   

   Title: Influence of preheating and heat input during welding upon the properties of welded joint on N-A-XTRA 70 steel
   Proceedings title: Materijali i zavarivanje u naftnim i petrokemijskim postrojenjima
   Language: hrvatski
   Place: Sisak
   Year: 1992
   Pages: from 91 to 103
   Meeting: Međunarodno savjetovanje - Materijali i zavarivanje u naftnim i petrokemijskim postrojenjima
   Held: from 11/19/92 to 11/20/92
   Summary: Influence of preheat temperature and heat input during weldingupon the properties of a welded joint on a HSLA steel gradeN-A-XTRA 70 has been investigated. The experimental work was madeon 15 mm thick sheet, and MAG welding process with Fluxo-filcord42 wire was used.
   Keywords: welded joint, HSLA steel, heat input
   

   ---

10. Type of paper: Paper in proceedings
    

    Title: Welding technology of pipe fittings of reactors
    

    Authors:

    Deželić, Romeo (9601)

    Proceedings title: CIM 93
    Pages: from 0 to 0
    

    ---

11. Type of paper: Paper in proceedings
    

    Title: Current status and repair of fuel storage tanks in coastland region
    

    Authors:

    Jurić, Ljubomir (19321)

    Deželić, Romeo (9601)

    Editors

    Grubić, Kajo

    Proceedings title: Materijali i zavarivanje u naftnim i petrokemijskim postrojenjima
    Language: hrvatski
    Place: Sisak
    Year: 1992
    Pages: from 259 to 266
    Meeting: Međunarodno savjetovanje - Materijali i zavarivanje u naftnim i petrokemijskim postrojenjima
    Held: from 11/19/92 to 11/20/92
    Summary: Based on a several years monitoring of appearance of sheetscontained in the walls of fuel storage and transportion tanks incoastal region of Croatia (Dalmatia), interesting conclustionsare made. Influence of corrosive attacking media andmicroclimatic conditions upon the appearance of inner wallsurface and location of tank upon the outer side of walls isregistered. These findings may be used as useful recommendationsfor design of future tanks and maintenance of existing fuelstorage tanks in the coastland.
    Keywords: storage tanks, fuel, repair
    

    ---

12. Type of paper: Paper in proceedings
    

    Title: Thermal stability of clinker cooler segments
    

    Authors:

    Jurić, Ljubomir (19321)

    Proceedings title: XVI. Savjetovanje o tehnološkim dostignućima i ekološkim rješenjima u proizvodni
    Language: hrvatski
    Place: SOLIN, R. Hrvatska
    Year: 1995
    Pages: from 8/3 to 8/10
    Meeting: XVI. SAVJETOVANJE O TEHNOLOŠKIM DOSTIGNUĆIMA I EKOLOŠKIM RJEŠENJIMA U PROIZVODNJI CEMENTA I VLAKNO-CEMENTNIH PROIZVODA
    Held: from 03/09/95 to 03/11/95
    Summary: This analisys is performed on four steel specimens ČL.4577(AISI-305) somewhat different chemical composition within standard specification. Laboratory evaluation was performed taking in account empirical and literature data on operational parameters, thermal loading being the most important. Although Č. 4577 belongs to the group of extremely fire resistant materials, experiments showed that deterioration of structural integrity occours with corresponding change in mechanical properties.
    

    ---

13. Type of paper: Paper in proceedings
    

    Title: Quantification of Disturbace in structural integrity of machined surface of AISI 316 Ti austenitic steel
    

    Authors:

    Jurić, Ljubomir (19321)

    Proceedings title: CIM 95
    Language: hrvatski
    Place: Zagreb
    Year: 1995
    Meeting: 3. MEĐUNARODNO SAVJETOVANJE PROIZVODNOG STROJARSTVA
    Held: from 10/09/95 to 10/10/95
    Summary: In this work on the shaping machine austenitic steel AISI 316 Ti was machined ortogonally. Tool rake angle, feed or undeformed chip thickness and cutting spedd was varied. By using previously embossed grid method, quantification of disturbance in structural integrity of machined surface was possible. Measurements were made by metallographic microscope and microscope and microhardness tester. Results are shown in form of figures and diagrams. In addition, the cutting ratio was determined. Appearances of machined surface and chips by macropolished samples were verified. Based on observations and results of measurements corresponding conclusion for practical use are derived.
    Keywords: austenitic steel, machinability, structural integrity
    

    ---

14. Type of paper: Paper in proceedings
    

    Title: Recycling of material and products
    

    Authors:

    Deželić, Romeo (9601)

    Proceedings title: CIM 95
    Language: hrvatski
    Place: Zagreb
    Year: 1995
    Meeting: 3. MEĐUNARODNO SAVJETOVANJE PROIZVODNOG STROJARSTVA
    Held: from 10/09/95 to 10/11/95
    Summary: The importance of recycling for the environmental protection and the economy of a country. Processes and preparation of materials for recycling. The improvement of the product design process with the aim of facilitating the recycling procedure. The refrigerator recycling plant. The effect of fragmentary separation of scrap material on newly manufactured steel.
    Keywords: recycling process, methods, fragmentation, sorting process,improved design
    

    ---

15. Type of paper: Ph.D.
    

    Title: Investigation of influence of heat treatment upon the properties of welded joints microalloyed steels
    Faculty: Fakultet strojarstva i brodogradnje Sveučilište u Zagrebu
    Author: MIŠINA NEDJELJKO
    Date of defense: 06/24/92
    Language: hrvatski
    Number of pages: 183
    Summary: This work is focused on the research of the influence of stressrelief annealing upon the properties of microalloved steel weldedjoints. The tests were carried out by annealing the base metal,and welding and annealing of steel weldments NIOVAL 50, NIOBAL 43and N-A-XTRA 70. The welding process applied the MAG procedurewith various heat inputs. Stress relief heat treatment wasperformed at the temperatures of 450, 550, 650 C, during theperiod of four hours. The mechanical properties and the analysisof microstructure of weldments were tested and structural testswere performed by x-ray diffraction and scanning analysis.
    Keywords: microalloyed steel, heat treatment, weld joints
    

    ---

16. Type of paper: Mentorship
    

    Title:
    Faculty: ELEKTROTEHNIKE, STROJARSTVA I BRODOGRADNJE U SPLITU
    Mentor: MIŠINA NEDJELJKO
    Date of defense: 07/03/95
    Number of pages: 60
    Author: LOZANČIĆ DIPL.ING. LJUBICA
    Degree level: D.A.
    

    ---

17. Type of paper: Mentorship
    

    Title:
    Faculty: ELEKTROTEHNIKE, STROJARSTVA I BRODOGRADNJE U SPLITU
    Mentor: MIŠINA NEDJELJKO
    Date of defense: 02/04/94
    Number of pages: 38
    Author: BUĆAN DIPL. ING. MILI
    Degree level: D.A.
    

    ---

18. Type of paper: Mentorship
    

    Title:
    Faculty: ELEKTROTEHNIKE, STROJARSTVA I BRODOGRADNJE U SPLITU
    Date of defense: 10/05/94
    Number of pages: 32
    Author: DRAŽIĆ DIPL.ING. ROBERT
    Degree level: D.A.
    

    ---

19. Type of paper: Mentorship
    

    Title:
    Faculty: ELEKTROTEHNIKE, STROJARSTVA I BRODOGRADNJE U SPLITU
    Mentor: MIŠINA NEDJELJKO
    Date of defense: 01/05/95
    Number of pages: 40
    Author: TUCANOVIĆ DIPL.ING. PREDRAG
    Degree level: D.A.
    

    ---

20. Type of paper: Mentorship
    

    Title:
    Faculty: ELEKTROTEHNIKE, STROJARSTVA I BRODOGRADNJE U SPLITU
    Mentor: MIŠINA NEDJELJKO
    Date of defense: 04/20/94
    Number of pages: 35
    Author: RADEČIĆ DIPL.ING. DRAGAN
    Degree level: D.A.
    

    ---

21. Type of paper: Mentorship
    

    Title:
    Faculty: ELEKTROTEHNIKE, STROJARSTVA I BRODOGRADNJE U SPLITU
    Mentor: MIŠINA NEDJELJKO
    Date of defense: 04/04/95
    Number of pages: 30
    Author: MIHANOVIĆ LUKA
    Degree level: D.A.
    

    ---

22. Type of paper: Mentorship
    

    Title:
    Faculty: ELEKTROTEHNIKE, STROJARSTVA I BRODOGRADNJE U SPLITU
    Mentor: MIŠINA NEDJELJKO
    Date of defense: 10/05/94
    Number of pages: 27
    Author: TOKIĆ DIPL.ING. ŽELJKO
    Degree level: D.A.
    

    ---

23. Type of paper: Mentorship
    

    Title:
    Faculty: ELEKTROTEHNIKE, STROJARSTVA I BRODOGRADNJE U SPLITU
    Mentor: JURIĆ LJUBOMIR
    Date of defense: 07/05/94
    Number of pages: 94
    Author: BABIĆ DIPL.ING. IVO
    Degree level: D.A.
    

    ---

24. Type of paper: Mentorship
    

    Title:
    Faculty: ELEKTROTEHNIKE, STROJARSTVA I BRODOGRADNJE U SPLITU
    Mentor: JURIĆ LJUBOMIR
    Date of defense: 04/05/94
    Number of pages: 96
    Author: KUZMANIĆ DIPL.ING. ANDRO
    Degree level: D.A.
    

    ---

25. Type of paper: Mentorship
    

    Title:
    Faculty: ELEKTROTEHNIKE, STROJARSTVA I BRODOGRADNJE U SPLITU
    Mentor: DEŽELIĆ ROMEO
    Date of defense: 07/16/94
    Number of pages: 47
    Author: ŠIŠKO DIPL.ING. MARIJA
    Degree level: D.A.
    

    ---

Ministry of Science and Technology	Croatian language	Svibor homepage	Alphabetic list	Sorted on project code	Sorted on institutions	Search	Help