- Type of paper
: Paper in journal
Title: Lumber defect detection as an element of automated
elements production
- Authors:
- Babunović, Krešimir (153952)
Journal: Drvna industrija
Number: 2
ISSN: 0012-6772
Volume: 43
Year: 1992
Pages: from 71 to 77
Number of references: 16
Language: hrvatski
Summary: The system of automated lumber defect detection is of
crucialimportance for a future system of automated element production.The
defect detection system must be sensitive to changes inexternal and
internal qualities of lumber and capable ofoperating under plant
conditions. This paper defines andclassifies lumber defects, specifies the
requirements for anautomated defect detection system and briefly describes
variousdetection methods (optical, ultrasonic, microwave, X-ray andneutron
method). The study also describes lumber defect detectionmethods in today's
plant conditions.
Keywords: Lumber defect detection, board cutting, element production
- Type of paper
: Paper in journal
Title: Computer grading of southern pine lumber
- Authors:
- Wagner, Francis G.
- Steele, Philip H.
- Kumar, Lalit
- Butković, Jurica (70022)
Journal: Forest Products Journal
Number: 2
ISSN: 0015-7473
Volume: 41
Year: 1991
Pages: from 27 to 29
Number of references: 14
Language: engleski
Summary: This paper describes a computer program to grade southern
pinelumber. The program was developed as part of research
projectinvestigating the benefits of scanning southern pine logs
forinterior defects. It evaluates two-dimensional andthree-dimensional
lumber defects as described in Southern PineInspection Bureau Grading Rules
for Finish,Boards,StructuralLight Framing,and Structural Joists and Planks.
Potentialapplications include evaluation and process control
atheadrigs,resaws,edgers,and trimsaws in sawmills.Application mayalso
include on-line lumber grading in mills and the training oflumber graders.
- Type of paper
: Paper in journal
Title: Quantity yield as a criterion for computer determination
of the method of furniture parts production from boards
- Authors:
- Babunović, Krešimir (153952)
Journal: Drvna industrija
Number: 4
ISSN: 0012-6772
Volume: 43
Year: 1992
Pages: from 136 to 144
Number of references: 25
Language: hrvatski
Summary: The main objective of this study is to find possibilities
forautomatic determination of the methjod of furniture partsproduction from
boards.The study proves such automateddetermination possible by means of
corresponding computer programfor simulated cutting of boards.The computer
program optimizesfurniture parts production on thje basis of board defects
(numberof defects and their disposition) and the required dimensions ofthe
corresponding furniture parts.Following the input of data onboard defects
and dimensions,the computer optimizescrosscutting-ripping and
ripping-crosscutting of the board,and bycomparing the two best optimization
solutions (with regard toquantity yield),chooses one of the two,suggests
the cuttingmethod and the coordinates of cuttings,and predicts theresults.
Keywords: Elements production, cutting of boards, optimization, quantity yield.
- Type of paper
: Paper in journal
Title: Improvement of the economy of sawmill production without
high investment costs
- Authors:
- Brežnjak, Marijan (5446)
Journal: Drvna industrija
Number: 3
ISSN: 0012-6772
Volume: 42
Year: 1991
Pages: from 47 to 48
Language: hrvatski
- Type of paper
: Paper in journal
Title: Product quality and the continuous production process in
the sawmill
- Authors:
- Brežnjak, Marijan (5446)
Journal: Drvna industrija
Number: 3
ISSN: 0012-6772
Volume: 43
Year: 1992
Pages: from 113 to 114
Language: hrvatski
- Type of paper
: Paper in journal
Title: Norwegian "sawmill of the year"
- Authors:
- Brežnjak, Marijan (5446)
Journal: Drvna industrija
Number: 4
ISSN: 0012-6772
Volume: 43
Year: 1992
Pages: from 169 to 170
Number of references: 4
Language: hrvatski
- Type of paper
: Paper in journal
Title: Influence of some log sawing methods of fir/spruce on
yield in sawmill
- Authors:
- Butković, Jurica (70022)
Journal: Drvna industrija
Number: 3
ISSN: 0012-6772
Volume: 44
Year: 1993
Pages: from 85 to 89
Number of references: 23
Language: hrvatski
Keywords: sawing methods, fir/spruce, yield
- Type of paper
: Paper in journal
Title: A contribution to the issue of oversizing sawn wood due to
sawing inaccuracy
- Authors:
- Babunović, Krešimir (153952)
Journal: Drvna industrija
Number: 2
ISSN: 0012-6772
Volume: 45
Year: 1994
Pages: from 68 to 71
Number of references: 19
Language: hrvatski
Summary: The difference between the dimensions in which boards are
produced,
and the dimensions in which they are sold is called oversizes. In
spite of huge significance for sawmilling, the problems of oversizes
are often neglected. The oversizes are dimensions that cannot be sold,
but they must given in order to ensure the selling dimensions of
boards. Except with oversizes for shrinkage, considerable savings may
be realized by correct giving of other oversizes, especially the
oversizes due to sawing inaccuracy. Regardless of possible savings,
the employers on many sawmills do not care about the sawing
inaccuracy, although this is a factor that can do significant
financial damage, and on the other hand produce significant financial
profits.
Keywords: oversizes of sawn wood, sawing inaccuracy
- Type of paper
: Paper in journal
Title: Influence of the fir/spruce saw log quality on the
sawmilling efficiency
- Authors:
- Brežnjak, Marijan (5446)
Journal: Mehanizacija šumarstva
Number: 3
ISSN: 0352-5406
Volume: 19
Year: 1994
Pages: from 173 to 180
Number of references: 5
Language: hrvatski
Summary: SUMMARY: In this study are analyzed most important factors
of the
sawlog quality of spruce and fir spicies. The "log quality" is here
understood in a wide sence: as the quality and the defects of the wood
itself, as the log sizes, log form, and the degree and way of it's
preparation for sawing in a sawmill. The purpose of the study is to
show how big influence has the quality of logs for a successful
sawmilling production as a effect of previous silvicultural and
logging operations.
Keywords: log quality, sawmilling efficiency, fir/spruce
- Type of paper
: Paper in proceedings
Title: Computers in Sawn Element Manufacture Technology
- Authors:
- Babunović, Krešimir (153952)
- Editors
- Grbac, Ivica
Proceedings title: Razvoj i perspektive finalne obrade drva
Language: hrvatski
Place: Zagreb
Year: 1991
Pages: from 103 to 108
Meeting: Ambienta, 18.međunarodni sajam namještaja
Held: from 04/18/91 to 04/18/91
Summary: Electronic engineering has become an integral part of
woodworkingindustry. Specific characteristics of raw materials used in
themanufacture of elements, and relatively complex technologyinvolved have
called for new methods in determining whichproduction procedures to use. In
order to optimize productivityand raw material utilization,technological
production lines todayare equipped with computers which can quickly
determine how tooptimally utilize parts of logs (offcuts or
strips).Lettingcomputers make decision how to produce various elements will
bethe next step towards the automatization of the process ofmanufacturing
elements.
Keywords: Sawn elements, cutting up boards, computer
- Type of paper
: Paper in proceedings
Title: From Log Preparation to Final Product
- Authors:
- Butković, Jurica (70022)
- Editors
- Grbac, Ivica
Proceedings title: Razvoj i perspektive finalne obrade drva
Language: hrvatski
Place: Zagreb
Year: 1991
Pages: from 33 to 37
Meeting: Ambienta, 18.međunarodni sajam namještaja
Held: from 04/18/91 to 04/18/91
Summary: The traditional sawmilling industry has become history. In
orderto survive, sawmilling industry must know in advance what toproduce
and who is going to buy its products. The result is aclose link between
sawmills and manufacturers of furniture andother end products.Sawmills will
adapt the degree of processingto the requirements of end users,so that the
choice of products,i.e. the quality of various forest timber assortments
will be amatter of joint consideration.
- Type of paper
: Paper in proceedings
Title: The influence of thickness variations on yield of sawlogs
- Authors:
- Babunović, Krešimir (153952)
- Editors
- Butković, Jurica (70022)
Proceedings title: Uključivanje znanosti u gospodarski sustav preradbe drva u Hrvatskoj
Language: hrvatski
Place: Zagreb
Year: 1994
Pages: from 42 to 44
Meeting: Uključivanje znanosti u gospodarski sustav preradbe drva u Hrvatskoj
Held: from 05/11/94 to 05/12/94
Summary: SUMMARY: In spite of huge significance for sawmilling, the
problems of
oversizes are often neglected. The meaning of sawn wood oversizes has
a huge significance, because they guaranted (if they given correctly)
the selling dimensions of boards. On the other hand, the oversizes has
a negative effect for sawlogs yield, because this dimensions cannot be
sold, but they must be given. Except with oversizes for shrinkage,
considerable savings may be realized by correct giving of other
oversizes, especially the oversizes due to sawing inaccuracy.
Regardless of possible savings, the employers on many sawmills do not
care about the sawing inaccuracy, although this is a factor that can
do significant financial damage, and on the other hand produce
significant financial profits.
Keywords: oversizes of sawn wood, thickness variations of boards, sawing inaccuracy
- Type of paper
: Paper in proceedings
Title: Sawmilling: what and how to go further
- Authors:
- Butković, Jurica (70022)
- Editors
- Butković, Jurica (70022)
Proceedings title: Uključivanje znanosti u gospodarski sustav preradbe drva u Hrvatskoj
Language: hrvatski
Place: Novi Vinodolski, Hrvatska
Year: 1994
Pages: from 6 to 7
Meeting: Uključivanje znanosti u gospodarski sustav preradbe drva u Hrvatskoj
Held: from 05/11/94 to 05/12/94
Summary: SUMMARY: The more evident problem in relationship between
forestry and
sawmilling makes huge difficulties in sawmill and final wood industry.
On the decreasing of raw quality addings are conditions of purchasing
and payment in a short term. With a known time terms of kapital
turning in wood industry, this problem becomes bigger. In this
conditions works not only sawmilling, but whole department 122 (veneer
production, board production, cellulose industry). In this reasons it
is necessery to solve the problems between forestry and wood industry
on both pleasures, because this is in interest for forestry and wood
industry, and the whole society.
Keywords: relationship between forestry and wood industry, raw material price, state of sawmilling
- Type of paper
: Paper in proceedings
Title: Optimization of furniture parts production based on
computer program simulation
- Authors:
- Babunović, Krešimir (153952)
- Butković, Jurica (70022)
- Editors
- Pellerin, Roy
Proceedings title: Proceedings of the 8th symposium on nondestructive testing of wood
Language: engleski
Place: Madison, Wisconsin, U.S.A.
Year: 1992
Pages: from 263 to 264
Meeting: 8th symposium on nondestructive testing of wood
Held: from 09/23/91 to 09/25/91
Summary: The computer program gives the best solution of two
possible industrial methods for board cutting. After the
crosscutting-ripping and ripping-crosscutting optimization of
board cutting simulation, the computer gives the decision and scheme of
board cutting based on higher yield.
- Type of paper
: M.A.
Title: Optimization of furniture parts production based on
computer program simulation
Faculty: Šumarski fakultet Sveučilište u Zagrebu
Date of defense: 05/04/92
Language: hrvatski
Number of pages: 140
Summary: The main objective of this study is to find possibilities
forautomatic determination iof the method of furniture partsproduction from
boards.This study proves the possibility ofautomated determination of the
method of furniture partysproduction from boards,by corresponding computer
program forsimulated cutting of board.This computer program
makesoptimization of furniture parts production based on board
defects(number of defects and their disposition) and correspondingfurniture
parts. After the input of the board defects anddimensions of the board, the
computer must optimize thecrosscutting-ripping and ripping-crosscutting of
board,and bycomparing the two best optimization solutions (through
quantityyield),choose one of the two,suggest the cuttingmethod, coordinates
of cuttings and assume the results.Withcorresponding defect detection,it is
possible to make atechnological line for automatic production of furniture
parts.
Keywords: Optimization, cutting of boards, furniture parts production, simulation
- Type of paper
: M.A.
Title: Quantity and quality yield of beech logs with smaller
diameter sawed on band saw
Faculty: Šumarski fakultet Sveučilište u Zagrebu
Date of defense: 07/27/93
Language: hrvatski
Number of pages: 108
- Type of paper
: M.A.
Title: Some technological features of sawmill transport means on
the log and lumber storage
Faculty: Šumarski fakultet Sveučilište u Zagrebu
Date of defense: 07/28/93
Language: hrvatski
Number of pages: 129
- Type of paper
: Mentorship
Title: Optimization of furniture parts production based on
computer program simulation
Faculty: Šumarski fakultet Sveučilište u Zagrebu
Date of defense: 05/04/92
Number of pages: 140
Author: Babunović Mr.sc. Krešimir
Degree level: M.A.
- Type of paper
: Mentorship
Title: Quantity and quality yield of beech logs with smaller
diameter sawed on band saw
Faculty: Šumarski fakultet Sveučilište u Zagrebu
Mentor: ADLER NEVENKA
Date of defense: 07/27/93
Number of pages: 108
Author: Tanušev Mr.sc. Vasil
Degree level: M.A.
- Type of paper
: Mentorship
Title: Some technological features of sawmill transport means on
the log and lumber storage
Faculty: Šumarski fakultet Sveučilište u Zagrebu
Date of defense: 07/28/93
Number of pages: 129
Author: Beljo Mr.sc. Ružica
- Type of paper
: Computer program
Title: Crosscutting-ripping/Ripping-Crosscutting
- Authors:
- Babunović, Krešimir (153952)
- Butković, Jurica (70022)
HW platform: IBM PC
Operating system: DOS 3.30
Programming language: Quck Basic
Year: 1995
Summary: The program makes decision based on optimization of
crosscutting-ripping method
and ripping-crosscutting method of boards cutting. Based on higher yield
the program gives the decision and scheme of board cutting.
Keywords: board cutting, ripping-crosscutting, crosscutting-ripping, yield
- Type of paper
: Project
Title: The idea-project of reconstruction of sawmill and
rough-mill
- Authors:
- Butković, Jurica (70022)
- Babunović, Krešimir (153952)
Ordering party: "Bilokalnik" Holding p.o., "DRVO", d.o.o.
Institution depot: "Bilokalnik" Holding p.o., "DRVO", d.o.o.
Year: 1992
Number of pages: 33
Language: hrvatski
- Type of paper
: Project
Title: Technological project of sawmill in Lokve
- Authors:
- Butković, Jurica (70022)
Ordering party: "Mihteh"- poduzeće za građevinarstvo i trgovinu,d.o.o.
Institution depot: "Mihteh"- poduzeće za građevinarstvo i trgovinu,d.o.o.
Year: 1993
Number of pages: 26
Language: hrvatski
- Type of paper
: Invited lecture
Title: Sawmilling through rough mill technology
Year: 1995
- Type of paper
: Invited lecture
Title: Sawmilling in U.S.A.
Institution: "Bilokalnik" Holding p.o., "DRVO", d.o.o.
Year: 1992
- Type of paper
: Invited lecture
Title: Sawmill and rough mill new technologies
Institution: "Bilokalnik" Holding p.o., "DRVO", d.o.o.
Year: 1993
- Type of paper
: Invited lecture
Title: Using of computer in decision of board cutting
Institution: "Bilokalnik" Holding p.o., "DRVO", d.o.o.
Year: 1992
- Type of paper
: Invited lecture
Title: Yield as a criteria for board cutting decision
Institution: "Bilokalnik" Holding p.o., "DRVO", d.o.o.
Year: 1993