- Type of paper
: Paper in journal
Title: AN EFFICIENT ALGORITHM FOR SAVING ORDERED SETS IN A
COMPACTED FORM
- Authors:
- Essert, Mario (73841)
Journal: International Journal of Computer Mathemtics
ISSN: 0020-7160
Volume: 34
Year: 1990
Pages: from 65 to 70
Language: engleski
Summary: Although developed for saving the large number of lines
thatoccur in the construction of biplanes, the algorithm described inthis
article has a general significance. The algorithm takes anyset of ordered
elements and converts it into an array of symbolsbased on a number base
with a factorial base. This array is thenpartitioned and saved as one or
more numbers. In this way asaving of more than 50% can be achieved.
Keywords: compression, factorial base, ordered sets
- Type of paper
: Paper in journal
Title: THE ALGORITHM FOR ELIMINATION OF ISOMORPHIC ORBITAL
STRUCTURES
- Authors:
- Essert, Mario (73841)
Journal: International Journal of Computer Mathemtics
ISSN: 0020-7160
Volume: 42
Year: 1992
Pages: from 1 to 5
Language: engleski
Summary: In the method of consruction of block designs introduced by
V.Cepulic one of the main problems is the elimination of isomorphicorbital
structures. The algorithm described in this articlesolves this problem by a
conception of canonical matrix form.
Keywords: block designs, orbital structures, canonical matrix form
- Type of paper
: Paper in journal
Title: How to Overcome the Combinatorial Explosion in the
Construction of Block Designs
- Authors:
- Essert, Mario (73841)
Journal: Journal of Computing and Information Technology - CIT
Number: 1
ISSN: 1330-1136
Volume: 2
Year: 1994
Pages: from 9 to 13
Number of references: 12
Language: engleski
Summary: The construction of the symmetric block design (v,k,l) with
larger parameters (k>9) is a huge computational problem. This article
describes one method which improves the computational task of the
construction in regard to the computer memory and time requirements. This
method has been described for the construction of the (71,21,6) block
design on which operates the Frobenius group of order 21.
Keywords: incidence structure, indexing, prepared vectors
- Type of paper
: Paper in proceedings
Title: The Automatization of Setting Austenitization Parameters
in the Heat Treatment of Steal
- Authors:
- Šitum, Željko
- Cajner, Franjo
- Essert, Mario (73841)
Proceedings title: Zbornik radova KoREMA
Language: engleski
Place: Zagreb
Year: 1995
ISBN/ISSN: 953-6037-08-4
Pages: from 539 to 542
Meeting: 40. jubilarni godišnji skup KoREMA
Held: from 04/19/95 to 04/21/95
Summary: The austenitization is the procedure of the heat treatment
which usually procedes other procedures like hardening, anneiling etc. In
order to make the procedure successful it is necessary to set the following
parameters: the austenitizing temperature, the regulations of heating up to
austenitizing temperature, the austenitizing time. The setting of these
parameters is worth for the conventional heating (in the assumption that
the chamber furnace or salt bath are on constant temperature). The user
friendly program written in the programming language Matlab is used to
setting the austenitization time by the means of three methods: Ordinanz,
Smoljnikov and Newton. It is used in laboratory practices in the subjects
of the Heat treatment.
Keywords: austenitization, mathematical modeling, Matlab program
- Type of paper
: Paper in proceedings
Title: A NEW APPROACH TO THE EDUCATION OF THE CONTROL ENGINEERING
- Authors:
- Šavor, Željko
- Essert, Mario (73841)
Proceedings title: Zbornik radova 39. godišnji skup KoREMA
Language: engleski
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-6037-02-5
Pages: from 421 to 426
Meeting: 39. godišnji skup KoREMA
Held: from 04/25/94 to 04/27/94
Summary: Under the project "The Computational Mathematics in the
technical environment" the computer program for teaching and studying
classical and modern control theory has been developed. The program is
written in MATLAB programming language. For its use it is not necessary to
have previous knowledge and experience in the programming. Tested on the
group of 28 senior students from our Faculty it turned out to be an
extraordinary educational tool.
Keywords: Control system theory, MATLAB program, educational tool
- Type of paper
: Computer program
Title: THE BIBLE BOOK WITH THE INTERACTIVE CONCORDANCE
- Authors:
- Essert, Mario (73841)
- Botički, Damir
Odering party: Kršćanska Sadašnjost
Institution depot: Kršćanska Sadašnjost
HW platform: PC XT/AT/386/486/P5
Operating system: DOS
Programming language: C/C++
Year: 1995
Summary: For the first time in Croatia: The Bible Book with the
interactive concordance on the PC computer. There are 3 instalation
floppies and 80 pages useržs manual. Very user friendly menu driven
program. The source code contains more than 20.000 lines.
Keywords: The Bible Book, concordance, interactive program
Other: (C)opyright by KS, Marulićev trg 14, 10000 ZAGREB, Croatia
- Type of paper
: Computer program
Title: THE GENERAL TESTING PROGRAM FOR EDUCATION AND COMPETITION
- Authors:
- Essert, Mario (73841)
- Botički, Damir
Odering party: Samostan sestara milosrdnica
Institution depot: Samostan sestara milosrdnica
HW platform: PC XT/AT/386/486/P5
Operating system: DOS
Programming language: C/C++
Year: 1995
Summary: This is a general computer program for testing of knowledge
in secondary schools (gymnasium) and for the various kinds of competitions.
It is very user friendly menu driven program. The source code contains more
than 5000 lines.
Keywords: test program, education and competitions
Other: (C)opyright by Samostan sestara milosrdnica, Frankopanska 17,
10000 ZAGREB, Croatia
