- Type of paper
: Book
Title:
- Authors:
- Kolobarić, Ferdo (19593)
- Majdandžić, Niko (69793)
- Kavgić, Petar (61123)
- Kach, Ivan (110320)
- Jurić, Miroslav (155741)
- Editors
- Kolobarić, Ferdo (19593)
Publisher: Republički Zavod za društveno planiranje Hrvatske
Year: 1990
Number of pages: 205
- Type of paper
: Book
Title:
- Authors:
- Majdandžić, Niko (69793)
Publisher: Strojarski fakultet u Slavonskom Brodu
ISBN: 953-6048-01-9
Year: 1994
Number of pages: 368
Language: hrvatski
- Type of paper
: Book
Title:
- Authors:
- Majdandžić, Niko (69793)
- Damjanović, Dobrila (130785)
Publisher: Strojarski fakultet u Slavonskom Brodu
Year: 1993
Number of pages: 112
Language: hrvatski
- Type of paper
: Book
Title:
- Authors:
- Majdandžić, Niko (69793)
- Čuljak, Slavko (194770)
Publisher: Strojarski fakultet u Slavonskom Brodu
Year: 1991
Number of pages: 254
Language: hrvatski
- Type of paper
: Book
Title:
- Authors:
- Majdandžić, Niko (69793)
- Čuljak, Slavko (194770)
Publisher: Strojarski fakultet u Slavonskom Brodu
Year: 1991
Number of pages: 88
Language: hrvatski
- Type of paper
: Book
Title:
- Authors:
- Majdandžić, Niko (69793)
- Čuljak, Slavko (194770)
Publisher: Strojarski fakultet u Slavonskom Brodu
Year: 1991
Number of pages: 88
Language: hrvatski
- Type of paper
: Paper in journal
Title: Designing with respect to maintenance
- Authors:
- Sebastijanović, Slavko (176505)
Journal: Nafta
Number: 3
ISSN: 0027-755
Volume: 41
Year: 1990
Pages: from 141 to 145
Number of references: 8
Language: hrvatski
Summary: The designing science as an independent scientific
discipline isa rather new one and it is taking the place and scope
itdeserves with much difficulties. Proper designing with respect
tomaintenance is a part of designing science.
Seeking for an optimum solution in designing is being donethrough a gradual
procedure of elaboration of the causeand -effect relacion between designing
and the factors influencing the quality of the design.The information
required to verify thecorrectness of the design is partly obtained
throught monitoring the operation of the unit and optimum maintenance. This
articlegives an example of a change of the reactor heater floorthrought
operation as well as on the need for economical andrealible maintenance.
Keywords: Designing, Reactor Heater, Heater Floor Plates, Maintenance
- Type of paper
: Paper in journal
Title: Sequence of eliminating the weak spots
- Authors:
- Sebastijanović, Slavko (176505)
Journal: Nafta
Number: 4
ISSN: 0027-755
Volume: 41
Year: 1990
Pages: from 211 to 216
Number of references: 6
Language: hrvatski
Summary: The annual turnaround is a regular activity in petroleum
refining plants maintenance. The timing of the begining and the duration of
the turnaround depends on the plant's functionality, crude supply, market
demand for refined products, spare parts stocks,as well as the availability
of tools, machines and labour.
If one or more of the above factors cause the turnaround to be apartial
turnaround of a process unit its part, it is necessary then, based on
certain defined criteria, to determin the sequence of performing the
turnaround over a longer period of time with interruptions of refining
process.
Keywords: Turnaround, Failure, Reliabilitz, Processing
- Type of paper
: Paper in journal
Title: Social-historical and political-juristic aspect of human
right to work
- Authors:
- Jurić, Miroslav (155741)
Journal: Privreda
Number: 5
ISSN: 0350-9427
Volume: 34
Year: 1990
Pages: from 583 to 590
Number of references: 36
Language: hrvatski
Summary: In contenporary days it is very difficult to find any other
legal institute which is more actual than right to get employment (theright
to work). The reason for this is, no doubt, in the factthat there are no
sufficient possibilities for realisation of theright. Unfortunately,
recessional ambient of our reality willaggravate the situation even more.
If we wish to analyse all changes trought the history of mankindrelating to
the right to work, we are going to have thissituation: from the very first
pretension that work is guaranteedto every human being, up to the modern
constitutionalright,-always prevails the fact that every man, under very
sameterms, can get every working position and function.
- Type of paper
: Paper in journal
Title:
- Authors:
- Jurić, Miroslav (155741)
Journal: Pravni vijesnik
Number: 1
ISSN: 0352-5317
Volume: 6
Year: 1990
Pages: from 95 to 114
Number of references: 107
Language: hrvatski
- Type of paper
: Paper in journal
Title: Technology of informatics - accelerators of technical -
technologic changes in industry
- Authors:
- Kavgić, Petar (61123)
Journal: Ekonomski vjesnik
Number: 2
Volume: 35
Year: 1991
Pages: from 143 to 152
Number of references: 28
Language: hrvatski
Summary: Deterioration of the economy of Slavonia and Baranja in the
period from 1972-1978, was caused by some objective and subjective
factors,but also, it happened from the reason of rather "old-time"
productive capacities in industry.Informatization, automatization and
robotization of productive capacities will become the main factor for
revitalization and obtaining of higher levels of production.
Technology of informatization is of predominant influence for diminuation
of the use of the use of raw materials, energy and transport costs and it
influences greatly improvement of social product per one investment unit.
- Type of paper
: Paper in journal
Title: Flexibility and production systems
- Authors:
- Jurić, Miroslav (155741)
Journal: Ekonomski vjesnik
Number: 2
Volume: 4
Year: 1991
Pages: from 247 to 257
Number of references: 20
Language: hrvatski
Summary: In the adaptation to the external circumstances the
production system will react with many-sided flexibility processes to more
and more numerous and subtle impulses coming from the surroundings, with
the processes which can be discussed in three essential aspects: technical
aspect, organizational one and social one.
- Type of paper
: Paper in journal
Title:
- Authors:
- Jurić, Miroslav (155741)
Journal: Energija
Number: 14
Volume: 7
Year: 1991
Pages: from 229 to 238
Number of references: 18
Language: hrvatski
- Type of paper
: Paper in journal
Title:
- Authors:
- Majdandžić, Franjo (193982)
Journal: Energija
Number: 3
ISSN: 0013-7448
Volume: 7
Year: 1993
Pages: from 141 to 151
Language: hrvatski
- Type of paper
: Paper in journal
Title:
- Authors:
- Majdandžić, Franjo (193982)
Journal: Elektrotehnika
Number: 3
ISSN: 0013-5848
Volume: 8
Year: 1993
Pages: from 123 to 131
Language: hrvatski
- Type of paper
: Paper in journal
Title:
- Authors:
- Majdandžić, Franjo (193982)
Journal: Energija
Number: 5
ISSN: 0013-7448
Volume: 8
Year: 1994
Pages: from 0 to 0
Language: hrvatski
- Type of paper
: Paper in journal
Title:
- Authors:
- Majdandžić, Franjo (193982)
Journal: Energija
Number: 6
ISSN: 0013-7448
Volume: 7
Year: 1993
Pages: from 363 to 371
Language: hrvatski
- Type of paper
: Paper in journal
Title: Increase of System reliability by Doubling with Renewal
- Authors:
- Perše, Dragutin (92030)
Journal: Tehnički vjesnik
Number: 2
Year: 1995
Pages: from 33 to 39
Language: hrvatski
Summary: The paper sets out to explain the operating system
reliability
increase model by the method of doubling operating elements with the
possibility of renewal.Particulary shown are the doubling systems operating
till the first failure,as well as doubling of multiple use systems with one
or two renewal teams.At the end,
table illustrated is the relation between particular coefficients
of readiness for "cold" and "hot" reserves.
Keywords: System reliability, Doubling, Renewal
- Type of paper
: Paper in journal
Title:
- Authors:
- Jurić, Miroslav (155741)
Journal: Pravni vijesnik
Number: 1-4
Year: 1991
Language: hrvatski
- Type of paper
: Paper in journal
Title: Verschleissprufung der Pflanzenolschneckenpressen
- Authors:
- Marušić, Vlatko (155730)
- Krumes, Dragomir (60515)
Journal: Journal of OIL SOAP Cosmetics
Number: N.5
Year: 1995
Language: njemački
- Type of paper
: Paper in journal
Title: Volume of Liquid in Cistern
- Authors:
- Pavić, Zlatko (127986)
- Šeper, Kajetan
Journal: Tehnički vjesnik
Number: 1,2
Year: 1995
Pages: from 53 to 56
Language: hrvatski
Summary: The authors investigated a concrete practical problem
concerning
the volume V(h;d,r,R) of liquid contained in a partially filled cistern of
given shape and size.The exact volume is expressed rather simply by
well-known elementary functions and the integral
J(h;r,R),besides.However,the integral is at least practically
a new non-elementary special function,therefore a numerical integration
algorithm and computer program as well are needed to obtain a practical
solution V(h).On the other hand,the problem can be solved empirically by
means of particular measurement
of functionally dependent values h and V for each choice of parameter
values d,r and R separately,which is a weak side of the experimental
procedure.
Keywords: Cistern,Volume,Integration
- Type of paper
: Paper in journal
Title:
- Authors:
- Majdandžić, Niko (69793)
Journal: INFOTREND
Number: 38
Year: 1995
Pages: from 52 to 58
Language: hrvatski
- Type of paper
: Paper in journal
Title:
- Authors:
- Majdandžić, Niko (69793)
Journal: Privreda
Number: 5
Year: 1991
Pages: from 135 to 142
Language: hrvatski
Summary: This paper deals with some problems of
development,introduction
and application of the informatic-management system in enterprises of metal
industry.Performed is,also,the analysis of efficiency of applicationand
here is defined a possible way of development,introduction of some
applications and subsystems through Information system to the system of
Computer Integrated
Manufacturing.
Here ara explained four separate but interrelated projects:
SCDB-Shared Common Date Base,CIM-Computer Integrated
Manufacturing,MRPII-Manufacturing Resource Planning,and
CLAS-Computer-aided logistics Support.
- Type of paper
: Paper in journal
Title: Models of Informations Systems
- Authors:
- Majdandžić, Niko (69793)
Journal: Tehnički vjesnik
Number: 1-2
ISSN: 1330-3651
Volume: 1
Year: 1994
Pages: from 69 to 85
Language: hrvatski
Summary: Research results into the models of the manufacturing firms
information system are given in the paper.Methodology is defined of the
development of an Automatic information system project end the results are
presented of the designed Automatic information system for various types of
firms.Examples are also given of realized software integration,the
integration being the basis for the design of computer integrated
manufacturing system(CIM).
Keywords: Data managament technologies, Information systems, Software integration
- Type of paper
: Paper in journal
Title:
- Authors:
- Majdandžić, Niko (69793)
Journal: EGE Energetika.Gospodarstvo.Ekologija.Etika
Number: 7
Year: 1994
Pages: from 44 to 45
Language: hrvatski
Summary: Today there are developed softwares in the world as a
programming suport of maintenance.An automatic repair and maintenance
control system(ASUR) designed by Faculty of Mechanical Engineering from
Slavonski Brod for Balakovo Nuclear Power Plant in Russia is described in
this article.
- Type of paper
: Paper in journal
Title:
- Authors:
- Majdandžić, Niko (69793)
Journal: INFOTREND
Number: 14
Year: 1993
Pages: from 58 to 64
Language: hrvatski
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Jurić, Miroslav (155741)
Proceedings title: Ergonomijski aspekti novih tehnologija
Language: hrvatski
Place: Zagreb
Year: 1991
Pages: from 29 to 36
Meeting: Ergonomijski aspekti novih tehnologija
Held: from 12/21/90 to 12/22/90
- Type of paper
: Paper in proceedings
Title: ASUR - Automation Management Maintenance System
- Authors:
- Majdandžić, Niko (69793)
- Damjanović, Dobrila (130785)
- Editors
- Damjanović, Dobrila (130785)
Proceedings title: Zbornik radova djelatnika Strojarskog fakulteta u 1991.godini
Language: engleski
Place: Slavonski Brod
Year: 1991
Pages: from 137 to 143
Meeting: Western Multiconference on Computer Simulation
Held: from 01/23/91 to 01/25/91
Summary: Dynamic development of humanity,particulary progressive
these last few decades,has led to the development of complex technical
systems which besides reliability in operation and availability in
exploitation have to meet the ever increasing demands for human environment
protection.Moreover,it is becoming more important to foresse the future
events and to simulate the expected behavior of certain technical systems
and components
designed for operation in special circumstances and to prepare maintenance
functions for operation under existing conditions.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Obnova i razvoj Istočne Hrvatske
Language: hrvatski
Place: Osijek
Year: 1992
Pages: from 48 to 49
Meeting: Obnova i razvoj Istočne Hrvatske
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: XV savjetovanje
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 226 to 239
Meeting: XV Savjetovanje o tehničkim dostignućima i ekološkim rješenjima u proizvodnji cementa i azbest-vlakno cementa
Held: from 11/05/92 to 11/07/92
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Održavanje industrijske opreme
Language: hrvatski
Place: Osijek
Year: 1992
Pages: from 64 to 76
- Type of paper
: Paper in proceedings
Title: Pressure vessels reliability eveluation module
- Authors:
- Sebastijanović, Slavko (176505)
Proceedings title: Zbornik objavljenih radova djelatnika SF u 1990.godini
Language: hrvatski
Place: Slavonski Brod
Year: 1991
Pages: from 217 to 223
Meeting: Industrijski sistemi IS'90
Held: from 06/21/90 to 06/23/90
Summary: The problem of reactor-type pressure vessels reliable
preformance exists in countries dealing with petroleum and nuclear plants
designing, as well as in these vessels has been installed.
This article shows a proposed module the phases of which represent a
procedure for determing the designed and there maining life of the vessel
with required reliability.
- Type of paper
: Paper in proceedings
Title: Hydrocracking process as a basis for lube stock production
- Authors:
- Sebastijanović, Slavko (176505)
Proceedings title: Zbornik radova djelatnika SF u 1991. godini
Language: hrvatski
Place: Slavonski Brod
Year: 1992
Pages: from 253 to 266
Summary: Tribology covers the field of scientific knowledge and also
includes all events and materials in close vicinity of the contacting
surfaces in reciprocal relative motion.
The major portion of modern lubricants is being made from waxylube stocks
that are derived from crude oil by means of different procedures.
Successful towards optimizing the existing technologies or/and towards the
changes in their purposes along with the introduction of the new operating
regime.
The article shows an example of a changed purpose of ahydrocracing process
and the deficiencies that occured due to this change for lube stock
production. The hydrocracing process concerned, in an Isomax unit,
originally had been designed for fuels production out of a fully
convertible feed, was supposed to operate under the conditions with a
residue having the distillation range same as the one of the feed, and to
be furterused for lube stock production. The change in physical and
chemical characteristics required a calculation of the new process
parameters for stabilization and fractionation sections.
Keywords: Lubrication, crude oil, hydrocracking, destillation, lube stock
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Sebastijanović, Slavko (176505)
Proceedings title: Zbornik radova djelatnika SF u 1991. godini
Language: hrvatski
Place: Slavonski Brod
Year: 1992
Pages: from 267 to 286
- Type of paper
: Paper in proceedings
Title: Market dynamism and production systems
- Authors:
- Jurić, Miroslav (155741)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 57 to 66
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/09/92 to 05/09/92
Summary: Marketing dynamism with all its ensuing implications has to
be considered as a distinctive feature of a period fully developed to
undertake the synthesis of the physical manupulative capabilities of
mechanical systems, sophisticated management and flexibility of present-day
technical structures. The question is about the epochmaking events which
even surpass the usual understanding of the syntagm: "new production
philosophy".
Keywords: Environment, market, production systems, fixed automation, inherent flexibility
- Type of paper
: Paper in proceedings
Title: About the organizing principles of current technical
structures
- Authors:
- Jurić, Miroslav (155741)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 67 to 76
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/09/92 to 05/09/92
Summary: Industrial organization is continuously "in persuit" of
different forms of disfunctional, wasteful effects of energy, matter and
information. Bringing these processes to an end became possible and quite
real for the fundamental principles have already been built into their
functioning schemata, i.e. immanent to the technical structures.
Keywords: Organization, information, technique, hierarchy
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Nikolaš, Ante (140551)
Proceedings title: Održavanje industrijske opreme
Language: hrvatski
Place: Osijek
Year: 1992
Pages: from 25 to 31
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Perše, Dragutin (92030)
Proceedings title: Zbornik radova djelatnika SF u 1991.
Language: hrvatski
Place: Slavonski Brod
Year: 1991
Pages: from 245 to 252
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Perše, Dragutin (92030)
Proceedings title: Održavanje industrijske opreme
Language: hrvatski
Place: Osijek
Year: 1992
Pages: from 142 to 148
- Type of paper
: Paper in proceedings
Title: Planning and Controlling of General Repair in a Nuclear
Power Plant
- Authors:
- Damjanović, Dobrila (130785)
- Majdandžić, Niko (69793)
Proceedings title: 1993 Simulation MultiConference
Language: engleski
Place: San Diego, U.S.A
Year: 1993
Pages: from 125 to 129
Meeting: 1993 Simulation MultiConference
Held: from 03/29/93 to 04/01/93
Summary: The basic concept of the Automation System for Planning and
Controlling (ASUP) developed for the application in the nuclear power plant
in the town of Balakovo, Russia, is show in this paper. In relation to
todays know information systems for planning (Optim,
Superproject,Presidence) the ASUP information system can solve some
specific problems and tasks connected with the organization and control of
general repair in complex power units:
- connections between plans by the technological dependence of repair
realization,
- automatic verification and reservation of spare parts and components in
store houses,
- shift reporting on finished works and calculation on work completion,
- controlling of planned and realized costs,
- connection between the repair activity plan and day - to day plan of
operations,
- automatic rebalance of plan.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Zbornik radova stručnog kolokvija Informatizacija održavanja
Language: hrvatski
Place: Osijek
Year: 1993
Pages: from 5-3 to 5-10
Meeting: Informatizacija održavanja
Held: from 02/12/93 to 02/12/93
- Type of paper
: Paper in proceedings
Title: Computerized repair and maintenance management system -
ASUR
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Zbornik radova 38. međunarodni skup KOREMA
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from 488 to 491
Meeting: 38. Međunarodni godišnji skup KOREMA
Held: from 04/26/93 to 04/28/93
Summary: The paper deals with the cocneption of the repair and
maintenance computerized system - ASUR, developed for the needs of the
Balakovo nuclear power station in Russia. In relation to todays known
information system for maintenance the ASUR displays the following
advantages:
- repair technology defined to the level of operations with anticipated
duration, required tools, materials and performance capacities,
- illustrations and schemes of some equipment given,
- interactive plan updating based on readiness report,
- reliability and mean working time between two breakdowns automatically
calculated.
- Type of paper
: Paper in proceedings
Title: Reliability of the system with constant recovery time
- Authors:
- Perše, Dragutin (92030)
Proceedings title: Zbornik radova 12.Međunarodno savjetovanje BIAM'94
Language: hrvatski
Place: Zagreb
Year: 1994
Pages: from G-23 to G-26
Meeting: 12.Međunarodno savjetovanje BIAM'94.
Held: from 06/23/94 to 06/24/94
Summary: In reservation systems the lowest probability boundary
value of the operating system with continuous (constant) recovery time is
known.By a long-term usage of the system this boundary value becomes equal
to the same value in the recovery of the system eith variable time of
recovery.This property is used in the paper and the solution for the
Poisson's process is given.At the end the theoretically obtained results
are illustrated with duplicated and triplicated systems.
- Type of paper
: Paper in proceedings
Title: CIM and some aspects of the working position of a man
- Authors:
- Jurić, Miroslav (155741)
Proceedings title: CIM '93
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from I-107 to I-114
Meeting: 2.međunarodno savjetovanje proizvodnoga strojarstva
Held: from 11/18/93 to 11/18/93
Summary: The actual working processes suggest that the conditions or
the standard labour force will be essentially reduced and that the man's
work will suffer from changes and uncertainty.It is owr intention here to
sum up the evidence into one of the possible directions to be expected with
the new technical-technological system.
Keywords: CIM, Integrations, Work
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Marušić, Vlatko (155730)
Proceedings title: Zbornik radova Tribologija u agroindustrijskom kompleksu
Language: hrvatski
Place: Osijek
Year: 1993
Pages: from 13 to 20
Meeting: Tribologija u agroindustrijskom kompleksu
Held: from 09/23/93 to 09/23/93
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Marušić, Vlatko (155730)
- Krumes, Dragomir (60515)
Proceedings title: Zbornik radova,Tribologija u agroindustrijskom kompleksu
Language: hrvatski
Place: Osijek
Year: 1993
Pages: from 27 to 33
Meeting: Tribologija u agroindustrijskom kompleksu
Held: from 09/23/93 to 09/23/93
- Type of paper
: Paper in proceedings
Title: The effect of the work parameters on the wear of
protective coatings of screw presses in vegetable-oil straining
- Authors:
- Marušić, Vlatko (155730)
- Krumes, Dragomir (60515)
- Lukačević, Jadranka
Proceedings title: CIM '93
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from B-55 to B-61
Meeting: 2.međunarodno savjetovanje proizvodnoga strojarstva
Held: from 11/18/93 to 11/18/93
Summary: Testing of imported and domestic spare parts was conducted
on screw presses of one of the European manufacturers.Original
carbonitrided and domestic spare parts were mass loss tested in laboratory
conditions by simulating the screw press operation in contact with
sunflower seeds.Higher resistance to wear of carbonitrided parts in
relation to cemented ones has been proved.
It has been found that,apart from a kind of protective coating, the loss of
mass was significantly affected by the proportion of the seed shells and
that the velocity of relative motion does not to any extent affect the
wear.
Keywords: Screw press, Protective coating, Work parameters, Wear
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Kolobarić, Ferdo (19593)
Language: hrvatski
Year: 1995
Meeting: II Međunarodni naučno-stručni skup
Held: from 10/05/95 to 10/07/95
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Majdandžić, Niko (69793)
- Editors
- Majdandžić, Niko (69793)
Proceedings title: Zbornik radova djelatnika SF u 1991.godini
Language: hrvatski
Place: Slavonski Brod
Year: 1992
Pages: from 99 to 115
- Type of paper
: Paper in proceedings
Title: Information technology of production systems-current state
and trends
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from H-21 to H-30
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/09/92 to 05/09/92
Summary: The work present the principal problems the prodaction
systems have in realization of the information technology plans.The results
achieved in our country are given and the methodis suggested for the
estemation of the information technology level of a production system.In
addition,one of implemented conceptions of the computerised data proccesing
system is also given together with the development plan of its integration
into the CIM system.
An example is presented of the realized integration in the product
definition,technologics and materials subsystem-DEPTO.
Keywords: Information technology, Information system, Computer intergrated manufacture
- Type of paper
: Paper in proceedings
Title: From individual programmes to computer integrated
manufacture
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from H-1 to H-20
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/09/92 to 05/09/92
Summary: The paper deals with basic trends in information
technologies
and with concepts for development of computer integrated manufacture in
industries and institutions of developed countries.Evolution of the
situation here is given and analysis
made of the papers presented for the CIM section of the meeting.From the
analysis the expected trends of development have been defined for various
manufacturing system in our country.
Keywords: Information technology, Information system, Computer integrated manufacture
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Majdandžić, Niko (69793)
- Damjanović, Dobrila (130785)
- Mazurek, Miroslav
Proceedings title: Zbornik radova djelatnika Strojarskog fakultete u 1991.godini
Language: hrvatski
Place: Slavonski Brod
Year: 1992
Pages: from 143 to 149
Meeting: VII simpozijum UPOS '91
Summary: In the work are given problems of development,introduction
and application of informational-management system in enterprises of metal
industry.Also it was performed analisys effectivity of application and
defined possibly way of development and introduction of some application
and undersystems through Information system to the system Computer
Integrated Manufacturing.
- Type of paper
: Paper in proceedings
Title: Information system for production management(ASIP)
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: 15.International Conference on Information Technology Interfaces
Language: engleski
Place: Zagreb
Year: 1993
Pages: from 129 to 134
Meeting: ITI'93
Held: from 06/15/93 to 06/18/93
Summary: The concept of the information system for production
management (ASIP) that was developed for the apllication in the machinery
industry production systems is shown in the article.Automation system for
production and assembling management in the engineering and designe
firms.It is used for repair planning and monitoring as a part of the
maintenance control computerized data processing system-ASUR implemented in
Balakovskaja nuclear power plant in Russia.
Keywords: Management information system, Planning introduction
- Type of paper
: Paper in proceedings
Title: CAD/CAM package integration into the management
information system of a firm
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: DAAAM International
Language: engleski
Place: Wien, Austrija
Year: 1993
Pages: from 183 to 185
Meeting: 4.Internationals DAAAM Symposium
Held: from 09/16/93 to 09/18/93
- Type of paper
: Paper in proceedings
Title: Common Modules in the Maintenance Information Systems
- Authors:
- Majdandžić, Niko (69793)
- Šarić, Tomislav
Proceedings title: DAAAM International
Language: engleski
Place: Wien, Austrija
Year: 1994
Pages: from 261 to 262
Meeting: 5.Internationals DAAAM Symposium
Held: from 10/27/94 to 10/29/94
Summary: The paper presents the concept of the maintenance
information system for town heating plants-AISOT,and definies the modules
which can be used as common for various forms and functions of maintenance
in manufacturing companies.One of the possible concepts of development of
computer integrated maintenance for the Croatian economy needs is
described.
Keywords: Computer integration maintenance, Maintenance information system
- Type of paper
: Paper in proceedings
Title: Integration of existing program packages into computerized
information procesing system of a firm
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: 12.Međunarodno savjetovanje BIAM'94
Language: hrvatski
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-6037-03-3
Pages: from B-1 to B-5
Meeting: 12.Međunarodno savjetovanje BIAM'94.
Held: from 06/23/94 to 06/24/94
Summary: The paper presents experience in the computerization of our
firms,gives evaluation of achieved results and points out problems
connected with development and introduction of automated information
management systems.It offers classification of information management
systems and defines common subsystems for groups of information management
systems.In particular it points out the problem of integrating existing
program packages of universal type into a computerized information
proccesing system and gives examples of acheved integration,the integration
being one of the prerequisites for the development of computer integrated
manufacturing(CIM).
- Type of paper
: Paper in proceedings
Title: Computerization of firms-prerequisite for the CIM strategy
development
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: CIM'93
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from I-71 to I-79
Meeting: 2.međunarodno savjetovanje proizvodnoga strojarstva
Held: from 11/18/93 to 11/18/93
Summary: In the strategies of development of firms one of the most
important tasks today is the design of information systems at a higer level
of automation.The results in designing and constructing management
information systems(AIS) together with the division into types according to
the firm's main line of business are shown in the paper.For the management
information systems of production and assembly works,tasks are defined
connected with the necessary integration of existing program
packages(CAD,CAM) into AIS,this being a prerequisite for the CIM system
strategy development.
Keywords: Computer integrated manufacturing, Management information system, Software integration
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Cebalo, Roko
- Majdandžić, Niko (69793)
Proceedings title: CIM'93,Pozvana i uvodna predavanja
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from I-1 to I-17
Meeting: 2.Međunarodno savjetovanje proizvodnog strojarstva
Held: from 11/18/93 to 11/18/93
- Type of paper
: Paper in proceedings
Title: Office management in automation information system of an
enterprise
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Informacijske i komunikacijske tehnologije u uredskom poslovanju '93
Language: hrvatski
Place: Varaždin, Hrvatska
Year: 1993
Pages: from 35 to 39
Meeting: IV međunarodni simpozij Informacijske i komunikacijske tehnologije u uredskom poslovanju
Held: from 10/28/93 to 10/29/93
Summary: The work deals with conception of AIS - management
information system(MIS) for industrial enterprise involved in
metal,electricty and timber works.
Particular emphasis is on problems of integrating book-keeping and
technical data subsystem as well as on integrating existing program
packages (CAD,CAM) into AIS.
The content is given of the common data base -BAZAP which links AIS
subsystems and represents the software for the operation of the firm's
manager office.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Održavanje industrijske opreme
Language: hrvatski
Place: Osijek
Year: 1993
Pages: from 39 to 53
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Zbornik udruženja održavatelja Hrvatske
Language: hrvatski
Place: Opatija
Year: 1994
Pages: from 45 to 64
Meeting: Suvremeni pristup u eksploataciji i održavanju osnovnih sredstava
- Type of paper
: Paper in proceedings
Title: Information systems models for different factories
- Authors:
- Majdandžić, Niko (69793)
- Damjanović, Dobrila (130785)
Proceedings title: IFAC '95
Language: hrvatski
Place: Cost Gold, Australia
Year: 1995
Meeting: IFAC '95
Held: from 07/02/95 to 07/05/95
Summary: The paper presents experience in the designe of Information
Systems(IS) and their introduction into production companies, the companies
being divided into groups characterized by their common requirements as to
the Information System.Research has shown that it is possible to develop
subsystems and modules which can be created as common all groups of
companies.The paper provides an explanation of the planning and scheduling
module which satisfies a broad range of requirements of this function in
various companies.
Keywords: Production system, Information system, JIT manufacturing, Scheduling(algorithms)
- Type of paper
: Paper in proceedings
Title: Development of the subsystems and modules common to the
information systems
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Zbornik radova 40.jubilarni godišnji skup KoREMA
Language: hrvatski
Place: Zagreb
Year: 1995
ISBN/ISSN: 953-6037-08-4
Pages: from 185 to 189
Meeting: 40.jubilarni godišnji skup KoREMA
Held: from 04/19/95 to 04/21/95
Summary: The paper present experience in the design of Management
Information Systems (MIS) and their introduction into production
companies,the companies being devided into groups characterized by their
common requirments as to the Management Information System.Research has
shown that it is possible to develop subsystems and modules which can be
created as common to all groups of companies. The paper provides an
explanation of the planning and scheduling module which satisfies a broad
range of requirements of this function in various companies.
- Type of paper
: Paper in proceedings
Title: Common model of the planning of preparation,assembly and
scheduling of prodaction
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: ITI'95
Language: engleski
Place: Zagreb
Year: 1995
Pages: from 449 to 454
Meeting: 17the International Conference ITI'95
Held: from 06/13/95 to 06/16/95
Summary: The paper presents the model of connected
planning,preparation and product assembly with scheduling of parts of
units.The existing models,solving either planning or schedulin,have been
analysed and the need for combining these two models has been pointed out
so that the necessary terms can be obtain from the planning model.The
elaboration of parts and units has been scheduled according to "JUST IN
TIME" method,Japanese production philosophy.Short proposition of the
Planning and Sceduling model,developed at the Faculty of Mechanical
Engineering in Slavonski Brod,have been given in this paper.
Keywords: Production management, Prodaction planning, Operations scheduling
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Kolobarić, Ferdo (19593)
Proceedings title: Održavanje industrijske opreme
Language: hrvatski
Place: Osijek
Year: 1993
Pages: from 147 to 154
- Type of paper
: Paper in proceedings
Title: Conception and Results The ASUP Programme System in the
Planning and Monitoring of Manufacture,Assembly and Project
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: AMST '93
Language: engleski
Place: Udine, Italija
Year: 1993
Pages: from 311 to 319
Meeting: 3rd International Connference on AMST'93
Held: from 04/26/93 to 04/27/93
Summary: The paper deals with the conception, mathematical model
andstructure of the ASUP data base - the computerized system forproject
management - developed at the University of OsijekMechanical Engineering
Faculty. Developed on our own analyticmodel based on graphic metod know as
gray-Kidd algorithm, theASUP systems has numerous advantages over the
available worldknow programme packages for the planning and monitoring
ofprojects. They are:
- automatic control and selection of equipment, material andtools at stock
according to schedule, definition of activities(required docimentation,
equipment, mechanization, tools andcontivances) and requirments plans in
accordance with expirationdates,
- definition of operations of activities and in this wayconnection of
planning of activities and schedulling ofoperations (assembly and
manufacture, maintenance etc.),
- automatic plan updating in accordance with the aggregate statusof the
project realization by reporting on job completion,
- optimization of project duration.
The experience acquired from the programme implementation anduse is also
described in the paper. The programme is used as anindependent system for
project management in engineering anddesign firms. In companies engaged in
erection of objects theASUP system in built into the site computerized data
processingsystem. In engine factories the programme in used integrated
intothe factory computerized data processing system - ASUP forplanning the
activities of all departments and for preparation,manufacturing and
assembly of products. It is also in the processof development as a planning
and monitoring concept for CIMsystems. Apart from this the programme is
intended for repairplanning and monitoring as a part of the maintennance
controlcomputerized data processing system - ASUR implemented and usedin
Balakovskaja nuclear power plant in Russia.
Keywords: Computerized system, Project management, Planing
- Type of paper
: Paper in proceedings
Title: Common Modules in the Maintenance Information Systems
- Authors:
- Majdandžić, Niko (69793)
- Šarić, Tomislav
Proceedings title: 5th SONT
Language: engleski
Place: Zagreb
Year: 1995
ISBN/ISSN: 953-6228-00-9
Pages: from 249 to 250
Meeting: 5th International Simposium on New Technologies
Held: from 09/25/95 to 09/27/95
Summary: The paper presents the concept of the maintenance
information system for town heating plants-AISOT,and definies the modules
which can be used as common for various forms and functions of maintenance
in manufacturing companies.One of the possible concepts of development of
computer integrated maintenance for the Croatian economy needs is
described.
Keywords: Computer integration maintenance, Maintenance information system
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Zbornik udruženja održavatelja Hrvatske
Language: hrvatski
Place: Opatija
Year: 1994
Pages: from 45 to 64
Meeting: Suvremeni pristup u eksploataciji i održavanju osnovnih sredstava
- Type of paper
: Paper in proceedings
Title: Interval Evalution of Intensity of Failure of Subsystems
Connected in Series
- Authors:
- Perše, Dragutin (92030)
Proceedings title: 5th SONT
Language: hrvatski
Place: Zagreb
Year: 1995
ISBN/ISSN: 953-6228-00-9
Pages: from 103 to 107
Meeting: 5th International Simposium on New Technologies
Held: from 09/25/95 to 09/27/95
Summary: The paper determines the intervals with exact value of
q-quantil of intensity of failure (lambda)q of N elements (of subsystem)
connected in series.The exact value of the quantil can be determined from
the equation
q=(interval)o-x f(t)dt , where f(t)
is N-tuple convolution of W distribution (WEIBULL) whith known parameters a
and b for simple cases (ie when all parameters are mutually
equal).However,for complex structures the calculation is extremely
difficult so the method of evaluation is used.Consequently the paper
determines the exactness interval for the intensity of failure (lambda)q
as:
<=(lambda)q<=
In adition lower and upper limit of exactness for (lambda)q is determined,
ie.:
(lambda)q>= and (lambda)>=
At the end the theoretically obtained results are illustrated with example.
Keywords: Quantil, Intensity of failure, System, Subsystem, Interval, Lower limit, Upper limit
- Type of paper
: M.A.
Title:
Faculty: Prirodoslovni-matematički fakultet Sveučilišta u Zagrebu Sveučilište u Zagrebu
Author: PAVIĆ ZLATKO
Language: hrvatski
Number of pages: 142
Summary: The work mostly represents section through p-adic
analysis,and less,an application of p-adic analysis.
At the beginning of the work,the field of p-adic numbers Qp is defined as a
completion of the field of rational numbers Q with respect to p-norm.Some
elementary algebraic and topological characteristics of a field Qp are
mentioned.The part of p-adic analysis of field Qp,related to p-adic measure
and integral,was investigated.This part of p-adic analysis is then applied
to the problem of p-adic interploation of the Riemann zeta-function.
In the field (omega)p,which is completion of algebraic closure of Qp,there
is considered a part of analysis mostly related to the domain of power
series.Basic properties of p-adic power series are exposed,several p-adic
elementary functions are defined,and by means of Newton polygons more
significant results,such as the p-adic Weirstrass Preparation Theorem,are
proved.
Finally,Dwork's rationality theorem of the zeta-function of a hypersurface
over a finite field is completelly exposed.
- Type of paper
: M.A.
Title:
Faculty: Fakultet strojarstva i brodogradnje Sveučilište u Zagrebu
Author: MARUŠIĆ VLATKO
Date of defense: 02/22/94
Language: hrvatski
Summary: The former use of the screw oil presses of three great
European oil productin has been analysed.
Comparing the quantity of extracted sunflower seeds during the operating
period after which the parts of the presses have to be replaced,it has been
concluded that the original imported carbonitrated parts and Stellit-6
surface welded parts have the greatest relative wear resistance.Domestic
cemented parts have lower relative wear resistance,and the lowest
resistance has been found for the parts with the surface hardened
protective coat.
The thickness of protective coats has been found by means of chemical and
metalografic analysis and by hardness measuring.
Wearing of the screw press parts as well as the parts with different
protective coats has been found unequal.This proves that the vessel wall
knives are worn out sooner than the other screw parts.
If we take into consideration the costs of the new parts of the press which
are used to replace the worn out ones and the indirect loss in the press
operation,we may prove the importance
of exploring the possibility to prolong the working period of screw press
parts.
Three own various processes for the protection of screw operating surface
have been chosen for the analysis : carbonitriding,Stellit-1 surface
welding and Cr-Mo surface welding.
Specimens of the surface welded layers on the edible oil screw presses in
exploitation have been tested in a laboratory simulator and the weight loss
of those specimens have been compared.It has been confirmed that the chosen
elements for the the experiment were correct.Comparing SiO2 microabrasion
of sunflower seed shells on the specimens from the operation and the
specimens from the experiment it has been found no difference betwen them.
It has been proved statisticaly ,that the loss of specimens mass was
significantly affected by the quantity of the seed shells in raw material
and kind of protective coat and that the velocity of relative motion does
not to any extant affect the wear.
Analysing the contact surfaces by means of light and SEM,the same dominant
wearing mechanism has been established on the specimens in exploitation as
well as after the laboratory testing.Hard structures (carbides and
carbonitrides) must be as tonah as possible.
Protective coat made by carbonitride is suggested as the most satisfactory
treatment concerning the wearing of the presses,edible oilquality
etc.Stellit-1 is suggested for revitalisation of the worn out parts.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 01/13/95
Number of pages: 65
Author: Škuljević ing.strojarstva Ivan
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 02/08/95
Number of pages: 92
Author: Đurđević Nenad
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 02/08/95
Number of pages: 99
Author: Đurđević Predrag
Degree level: M.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 01/12/95
Number of pages: 51
Author: Mitrović Antonio
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 01/13/95
Number of pages: 69
Author: Baotić Vladimir
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 02/08/95
Number of pages: 48
Author: Marsenić Tihomir
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 01/12/95
Number of pages: 70
Author: Kruljac Božica
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 12/21/94
Number of pages: 60
Author: Kovačević Željko
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 07/05/94
Number of pages: 65
Author: Mirković Katica
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 06/07/94
Number of pages: 65
Author: Vinković Zoran
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 06/07/94
Number of pages: 58
Author: Petranović Božidar
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 01/13/94
Number of pages: 53
Author: Gunčević Davor
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 01/13/94
Number of pages: 59
Author: Soldo Mario
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 01/13/95
Number of pages: 64
Author: Kuterovac Josip
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 05/11/95
Number of pages: 76
Author: Pavelić Ružica
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 05/25/95
Number of pages: 73
Author: Šestić Ante
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 07/07/95
Number of pages: 69
Author: Zeba Zoran
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 07/05/95
Number of pages: 74
Author: Galić Vjekoslav
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 07/07/95
Number of pages: 61
Author: Katinić Perica
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 06/07/95
Number of pages: 51
Author: Đurašinović Šimo
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 07/05/95
Number of pages: 63
Author: Đaković Dalibor
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 07/05/95
Number of pages: 63
Author: Beuk Mladen
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 02/02/95
Number of pages: 71
Author: Markotić Željko
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 06/10/92
Number of pages: 38
Author: Briški Vesna
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 04/27/95
Author: Veverec Vlado
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 06/23/95
Number of pages: 71
Author: Vidović Marin
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 06/22/91
Number of pages: 76
Author: Zeba Gordana
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 02/24/95
Number of pages: 63
Author: Maoduš Igor
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 05/04/93
Number of pages: 68
Author: Gusak Jadranka
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 02/24/95
Number of pages: 71
Author: Ćurković Ljubica
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 06/23/95
Number of pages: 84
Author: Čaldarević Leo
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 05/25/95
Number of pages: 57
Author: Čačija Marinko
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 03/28/91
Number of pages: 70
Author: Barišić Josip
Degree level: D.A.
- Type of paper
: Computer program
Title:
- Authors:
- Kristek, Željko (130763)
- Onukijević, Josip (144386)
- Sedmak, Mladen (128030)
- Krijan, Mirjana (130774)
Odering party: Nuklearna elektrana Balakovskaja u Balakovu Rusija putem Atomenergoeksporta
Institution depot: Nuklearna elektrana Balakovskaja u Balakovu Rusija putem Atomenergoeksporta
HW platform: 4 LAN mreže 115 PC računala
Operating system: MS-DOS
Programming language: Clipper,FORTRAN
Year: 1992
- Type of paper
: Computer program
Title:
- Authors:
- Majdandžić, Niko (69793)
Odering party: JP Toplina Slavonski Brod
Institution depot: JP Toplina Slavonski Brod
HW platform: PC
Operating system: MS-DOS
Programming language: PARADOX
Year: 1994
- Type of paper
: Computer program
Title:
- Authors:
- Majdandžić, Niko (69793)
Odering party: MGK Rijeka
Institution depot: MGK Rijeka
HW platform: PC
Operating system: MS-DOS
Programming language: PARADOX
Year: 1995
- Type of paper
: Computer program
Title: Production capacities maintenance-ODKAP
- Authors:
- Majdandžić, Niko (69793)
- Mazurek, Miroslav
Odering party: TANG Nova Gradiška
Institution depot: Strojarski fakultet Slavonski Brod
HW platform: PC
Operating system: MS-DOS
Programming language: Clipper
Year: 1992
Summary: Inder this function we think of work performed in order to
assurethe correctness ie. functional usability of means of work. Thesemeans
of work include mechines, devices, installations, tools,even buildings,
factories and paths, and other infastructuralequipment of the firm.
The production organization is to pay special attention to
bettermaintenance of basic (production) means, in order to realize
thereqired production. ASIP system gives opportunity to put undercontrol
the production equipment maintenance (machenes, devices,tools) ,with the
help of:
- composing and recording the data on means and technology ofmaintenance,
- elaboration and following of maintenance plans,
- controlling the supplies of spare parts, components, tools,accesories and
auxiliary means,
- following of defects,
- management of maintenance works,
-management of maintenance expenses.
The system gives to the staff resposible for the production
meansmaintenance as insight into:
- maintenance plans (preventive checks-upspare, parts,lubrication,
adjustement , cleaning, protection, etc.),
- plans of necessary labour considering the structure and number,
- plans and state of spare parts, components, tools,instrumentation, main
and consumable mmaterial,
- reliability of spare parts,
- place where the spare parts are to be used.
-
- Type of paper
: Survey/Study
Title:
- Authors:
- Majdandžić, Niko (69793)
- Kolobarić, Ferdo (19593)
- Kavgić, Petar (61123)
- Jurić, Miroslav (155741)
- Kach, Ivan (110320)
Ordering party: Samoupravna interesna zajednica
Institution depot: Samoupravna interesna zajednica
Year: 1990
Number of pages: 198
Language: hrvatski
- Type of paper
: Project
Title:
- Authors:
- Majdandžić, Niko (69793)
- Damjanović, Dobrila (130785)
- Filep, Radovan (144114)
- Kristek, Željko (130763)
- Onukijević, Josip (144386)
- Sedmak, Mladen (128030)
Ordering party: Nuklearna elektrana Balakovskaja u Balakovu Rusija putem Atomenergoeksporta
Institution depot: Nuklearna elektrana Balakovskaja u Balakovu Rusija putem Atomenergoeksporta
Year: 1990
Number of pages: 800
Language: Ruski
Other: Softver urađen po ovom projektu dobio je priznanje za novitet
na
međunarodnoj izložbi Interbiro-informatika u Zagrebu 1992.godine.
- Type of paper
: Project
Title:
- Authors:
- Majdandžić, Niko (69793)
- Kekez, Franjo
- Nikolaš, Ante (140551)
- Filep, Radovan (144114)
Ordering party: Tvornica cementa Našice
Institution depot: Tvornica cementa Našice
Year: 1992
Number of pages: 400
Language: hrvatski
- Type of paper
: Project
Title:
- Authors:
- Majdandžić, Niko (69793)
- Kekez, Franjo
- Damjanović, Dobrila (130785)
Ordering party: Poduzeće "ĐĐ"-Montaža
Institution depot: Poduzeće "ĐĐ"-Montaža
Year: 1992
Number of pages: 725
Language: hrvatski
- Type of paper
: Project
Title:
- Authors:
- Majdandžić, Niko (69793)
- Damjanović, Dobrila (130785)
- Filep, Radovan (144114)
- Čuljak, Slavko (194770)
Ordering party: Poduzeće "Plamen-International" Požega
Institution depot: Poduzeće "Plamen-International" Požega
Year: 1992
Number of pages: 600
Language: hrvatski
- Type of paper
: Project
Title:
- Authors:
- Majdandžić, Niko (69793)
Ordering party: MGK Rijeka
Institution depot: MGK Rijeka
Year: 1993
Number of pages: 280
Language: hrvatski
Other: Dobio priznanje za novitet na međunarodnoj izložbi Info'93 u
Zagrebu.Proglašen najboljim cjelovitim softverom za proizvodna poduzeća u
Hrvatskoj po izboru časopisa Infotrend i Gospodarske Komore Hrvatske.
- Type of paper
: Project
Title:
- Authors:
- Majdandžić, Niko (69793)
Ordering party: Poduzeće "Požežanka" u Požegi
Institution depot: Poduzeće "Požežanka" u Požegi
Year: 1994
Number of pages: 300
Language: hrvatski
- Type of paper
: Project
Title:
- Authors:
- Majdandžić, Niko (69793)
Ordering party: Poduzeće "Papuk" u Požegi
Institution depot: Poduzeće "Papuk" u Požegi
Year: 1994
Number of pages: 250
Language: hrvatski
- Type of paper
: Project
Title:
- Authors:
- Majdandžić, Niko (69793)
Ordering party: Poduzeće "Končar-TPS" u Požegi
Institution depot: Poduzeće "Končar-TPS" u Požegi
Year: 1994
Number of pages: 280
Language: hrvatski
- Type of paper
: Project
Title:
- Authors:
- Majdandžić, Niko (69793)
Ordering party: Poduzeće "Dorada" u Kutjevu
Institution depot: Poduzeće "Dorada" u Kutjevu
Year: 1995
Number of pages: 200
Language: hrvatski
- Type of paper
: Project
Title:
- Authors:
- Majdandžić, Niko (69793)
- Damjanović, Dobrila (130785)
- Filep, Radovan (144114)
- Čuljak, Slavko (194770)
Ordering party: Poljoprivredno prehrambreni kombinat Kutjevo
Institution depot: Poljoprivredno prehrambreni kombinat Kutjevo
Year: 1993
Number of pages: 183
Language: hrvatski
- Type of paper
: Invited lecture
Title:
Institution: Hrvatska akademija znanosti i umjetnosti
Year: 1993
- Type of paper
: Invited lecture
Title:
Institution: Sveučilišni računski centar,Zagreb
Year: 1994
- Type of paper
: Invited lecture
Title:
Year: 1994
- Type of paper
: Other
Title:
- Authors:
- Majdandžić, Niko (69793)
Type of work: Izlaganje na seminaru "Računalom integrirana proizvodnja", Mostar ,11.07.1995.
Language: hrvatski
- Type of paper
: Other
Title:
- Authors:
- Majdandžić, Niko (69793)
Type of work: Izlaganje na seminaru "Računalom integrirana proizvodnja " ,Mostar ,11.07.1995.
Language: hrvatski
- Type of paper
: Other
Title:
- Authors:
- Majdandžić, Niko (69793)
Type of work: Izlaganje na seminaru "Računalom integrirana proizvodnja" ,Mostar, 11.07.1995.
Language: hrvatski
- Type of paper
: Other
Title:
- Authors:
- Majdandžić, Niko (69793)
Type of work: Izlaganje na seminaru "Računalom integrirana proizvodnja", Mostar, 11.07.1995.
Language: hrvatski
- Type of paper
: Other
Title:
- Authors:
- Majdandžić, Niko (69793)
Type of work: Izlaganje na seminaru "Računalom integrirana proizvodnja", Mostar, 11.07.1995.
Language: hrvatski