- Type of paper
: Book
Title:
- Authors:
- Majdandžić, Niko (69793)
- Čuljak, Slavko (194770)
Publisher: Sveučilište u Osijeku - Strojarski fakultet Slavonski Brod
Year: 1991
Number of pages: 254
Language: hrvatski
- Type of paper
: Book
Title:
- Authors:
- Damjanović-Živić, Dobrila (130785)
- Mazurek, Miroslav (187204)
- Čičak, Mirjana (127826)
Publisher: Sveučilište u Osijeku - Strojarski fakultet Slavonski Brod
Year: 1992
Number of pages: 77
Language: hrvatski
- Type of paper
: Book
Title:
- Authors:
- Kovačić, Branimir (102152)
Publisher: Elektrotehnički fakultet u Osijeku
Year: 1991
Number of pages: 61
Language: hrvatski
- Type of paper
: Book
Title:
- Authors:
- Kovačić, Branimir (102152)
Publisher: Elektrotehnički fakultet u Osijeku
Year: 1992
Number of pages: 118
Language: hrvatski
- Type of paper
: Book
Title:
- Authors:
- Majdandžić, Niko (69793)
- Čuljak, Slavko (194770)
Publisher: Sveučilište u Osijeku - Strojarski fakultet Slavonski Brod
Year: 1991
Number of pages: 88
Language: hrvatski
- Type of paper
: Book
Title:
- Authors:
- Majdandžić, Niko (69793)
- Čuljak, Slavko (194770)
Publisher: Sveučilište u Osijeku - Strojarski fakultet Slavonski Brod
Year: 1991
Number of pages: 310
Language: hrvatski
- Type of paper
: Book
Title:
- Authors:
- Damjanović-Živić, Dobrila (130785)
- Čičak, Mirjana (127826)
- Mazurek, Miroslav (187204)
Publisher: Sveučilište u Osijeku - Strojarski fakultet Slavonski Brod
Year: 1993
Number of pages: 63
Language: hrvatski
- Type of paper
: Book
Title: CIM und flexibile Fertigungssysteme
- Authors:
- Katalinić, Branko (73512)
Publisher: Technische Fakultat der Universitat Maribor
Year: 1995
Language: njemački
- Type of paper
: Book
Title:
- Authors:
- Majdandžić, Niko (69793)
- Damjanović-Živić, Dobrila (130785)
Publisher: Sveučilište u Osijeku - Strojarski fakultet Slavonski Brod
Year: 1993
Number of pages: 112
Language: hrvatski
- Type of paper
: Book
Title:
- Authors:
- Majdandžić, Niko (69793)
Publisher: Sveučilište u Osijeku - Strojarski fakultet Slavonski Brod
ISBN: 953-6048-01-9
Year: 1994
Number of pages: 368
Language: hrvatski
- Type of paper
: Paper in journal
Title:
- Authors:
- Krumes, Dragomir (60515)
Journal: Zaštita materijala
Volume: 31
Year: 1990
Pages: from 31 to 57
Language: hrvatski
- Type of paper
: Paper in journal
Title: Analysis of Informatization of Productive Systems and
future Progress Concept
- Authors:
- Majdandžić, Niko (69793)
Journal: Privreda
Number: 2
Volume: 35
Year: 1991
Pages: from 135 to 142
Number of references: 7
Language: hrvatski
Summary: This paper deals with some problems of development,
indructionand application of the informatic-management systems
inenterprises of metal industry. Performed is, also, the analysisof
efficiency of application and here is defined a possible wayof development,
indtroduction of some applications and subsystemsthrought Information
system to the system of Computer IntegratedManufacturing.
Here are explained four separate but interrelated projects:SCDB-Shared
Common Date Base, CIM-Computer IntegratedManufacturing, MRPII-Manufacturing
Resource, andCLAS-Computer-aided logistics Support.
- Type of paper
: Paper in journal
Title: Computer aided welding Technology Expert System for aec
welding Technology Election
- Authors:
- Petti, Darko (128004)
Journal: Privreda
Number: 2
Volume: 35
Year: 1991
Pages: from 177 to 182
Language: hrvatski
Summary: Here is given the paralled analysis of data for
completedescription and determination of welding technology, and at
theother side, possibilities of software tools.
Also, here is discussed the date distribution with reference totechnology
determination stages, and convenient PC softwaredistribution.
Describe are, as well, the connections between twotechnologies-welding
technology as domain and computerapplication technology as funcion. The
most important goal is tocombine the mosaic as the base for computer
integratedmanufacturing.
- Type of paper
: Paper in journal
Title: The new Technologies'importance and Part in Production
Systems
- Authors:
- Damjanović-Živić, Dobrila (130785)
Journal: Privreda
Number: 2
Volume: 35
Year: 1991
Pages: from 169 to 176
Number of references: 8
Language: hrvatski
Summary: This paper describe Artifical Intelligence application in
CIMsystem. Specially, here is a discussed production experience inthe
experted system application as the most important part of theArtifical
Intelligence Technology.
- Type of paper
: Paper in journal
Title: Application of Programme Entity "ASUP"
- Authors:
- Filep, Radovan (144114)
- Sedmak, Mladen (128030)
Journal: Privreda
Number: 2
Volume: 35
Year: 1991
Pages: from 183 to 190
Language: hrvatski
Summary: This paper presents the organisation for project management
basedon the principle of "Project team". Also, here is displayed
theprogramme "ASUP", which is efficient tool for informationtreatment in
the course of business decision making.
- Type of paper
: Paper in journal
Title: Application of CAD-CAM System in Product Design
- Authors:
- Lebar, Ivan (127916)
- Onukijević, Josip (144386)
- Sigurnjak, Željko (128041)
Journal: Privreda
Number: 2
Volume: 35
Year: 1991
Pages: from 191 to 196
Language: hrvatski
Summary: This paper gives the contents and conception of CAD-CAM
System.Two explicite examples of CAD-CAM System in the Holding
Co."ĐuroĐakoviĆ" are giving characteristics of application of such systemin
so called "our terms".
- Type of paper
: Paper in journal
Title:
- Authors:
- Majdandžić, Niko (69793)
Journal: Poslovni časopis za informatiku info trend
Number: 14
Year: 1993
Pages: from 58 to 64
Language: hrvatski
- Type of paper
: Paper in journal
Title:
- Authors:
- Krumes, Dragomir (60515)
Journal: Tehnički vjesnik
Number: 3/4
ISSN: 1330-3651
Volume: 1
Year: 1994
Pages: from 17 to 24
Language: hrvatski
Summary: The paper examines the alloying elements temperature and
processing time influence upon corrosion resistance of austenite
stainless steel. The expected corrosion process mechanism has been proves
and it follows from the results that the influence of carbide sets along
the austenite grain boundary is assential
for the decrease of corrosion resistance of austenite steel
ASTM A 240, type 316.
Keywords: Stainless steel Corrosion rate Heat treatment parameters
- Type of paper
: Paper in journal
Title: Verschleisprufung der Pflanzenolschneckenpressen
- Authors:
- Krumes, Dragomir (60515)
Journal: Journal of oil soap Cosmetics
Year: 1995
- Type of paper
: Paper in journal
Title: CIM-Konzept als integraler Bestandteil der
Produktionsstrategie
- Authors:
- Katalinić, Branko (73512)
- Katalinić, Branko (73512)
Journal: Journal fur Betriebswirtschaft
Year: 1994
Pages: from 155 to 157
- Type of paper
: Paper in journal
Title: Steuerungsstrategien und Ablaufplanung fur komplexe
flexibile Fertigungssysteme
- Authors:
- Katalinić, Branko (73512)
Journal: Zeitschrift des Osterrichischen Verbandes fur
Elektrotechnik
Number: 3
Year: 1993
Pages: from 113 to 122
Language: njemački
- Type of paper
: Paper in journal
Title: Anpassungsfahigkeit, Effektivitatdrei Kriterien zur
Bewertung der Flexibilitat von flexiblen Fertigungssystemen
- Authors:
- Katalinić, Branko (73512)
Journal: Zeitschrift des Osterrichischen Verbandes fur
Elektrotechnik
Number: 3
Year: 1993
Pages: from 138 to 140
Language: njemački
- Type of paper
: Paper in journal
Title: Complex Flexible Manufacturing Systems
- Authors:
- Katalinić, Branko (73512)
Journal: Design of Control Structures and Scheduling Strategies
Year: 1993
Pages: from 107 to 117
Language: engleski
- Type of paper
: Paper in journal
Title: Optimisation of Use and Management of Production Resources
in complex FMS
- Authors:
- Katalinić, Branko (73512)
Journal: Manufacturing Resource Planning
Number: 7
ISSN: -
Year: 1993
Language: engleski
- Type of paper
: Paper in journal
Title: Complex Flexible Manufacturing Systems
- Authors:
- Katalinić, Branko (73512)
Journal: Annals of CIRP
Number: 1
ISSN: 0176-3377
Volume: 23
Year: 1994
Pages: from 65 to 70
Language: engleski
- Type of paper
: Paper in journal
Title: Auslegung von Steuerungsstrukturen und Strategien fur die
Steuerung von komplexen flexiblen Fertigungssystemen
- Authors:
- Katalinić, Branko (73512)
Journal: Tehnički vjesnik
ISSN: 1330-3651
Volume: 1&2
Year: 1994
Pages: from 13 to 48
Language: njemački
- Type of paper
: Paper in journal
Title: Preparatory Actions for An Efficient, Useful and Quick
Introduction of Information Technology in Manufacturing Companies
- Authors:
- Kekez, Franjo (90682)
Journal: Tehnički vjesnik
Number: 1,2
ISSN: 1330-3651
Volume: 2
Year: 1995
Pages: from 25 to 31
Language: hrvatski
Summary: The paper presents the results of the research into
preparatory
actions that have to be considered when an efficient, useful and
quick introduction of information technology in manufacturing
companies is necessary. These actions include descriptions of
states and their causes, requirements and operational specifications,
activities to be taken, solutions to be found
and warnings to be observed.
Keywords: Information technology Information system Manufacturing company
- Type of paper
: Paper in journal
Title: Models of Information Systems
- Authors:
- Majdandžić, Niko (69793)
Journal: Tehnički vjesnik
Number: 1,2
ISSN: 1330-3651
Volume: 1
Year: 1994
Pages: from 69 to 85
Language: hrvatski
Summary: Reasrch results into the models of the manufacturing firms
information system are given in the paper.Methodology is defined
of the development of an Automatic information system project
and the results are presented of the designed Automatic information system
for various types of firmes.Examples are also
given of realized software integration, the integration being the basis for
the computer integrated manufacturing system (CIM).
Keywords: Data managament technologies Information systems Software integration
- Type of paper
: Paper in journal
Title:
- Authors:
- Majdandžić, Niko (69793)
Journal: EGE Energetika.Gospodarstvo.Ekologija.Etika
Number: 7
ISSN: 1330-0628
Year: 1994
Pages: from 44 to 45
Language: hrvatski
Summary: Today there are developed softwares in the world as a
programming
suport of maintenance.An automatic repair and maintenance control system
(ASUR) designed by the Faculty of Mechanical Engineering from Slavonski
Brod for Balakovo Nuclear Power Plant in Russia is described in this
article.
- Type of paper
: Paper in journal
Title:
- Authors:
- Majdandžić, Niko (69793)
Journal: INFOTREND
Number: 38
Year: 1995
Pages: from 52 to 58
Language: hrvatski
- Type of paper
: Paper in proceedings
Title: Computer aided welding technology working places for
pressure vessel manufacturing facility
- Authors:
- Petti, Darko (128004)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 53 to 62
Meeting: Suvremeni trendovi proizvodnog strojarstva
Summary: This article describes the approach to computer aided
workingplaces for welding technologist, whose task is to define
weldingjoints and groves for pressure vessels, welding parameters,
weldfiller material selection, and welding proces and welderqualification.
Technical, technological and organizing tasks inwelding technology
department are discussed, mutualy withcomputer science demands to reach the
final alm, to use computeron every working place, and in whole process. The
access to theproblem solving is in modules creation for working tasks
inwelding technology department and computer programming tasks. Thesecond
step is to join modules on the base of computerprogramming technology. At
the end the rewiew of joing modules isgiven.
Keywords: Computer aided working place, welding technology, pressure vessel, working efficiency
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Vnučec, Zdravko (52733)
Proceedings title: Zbornik radova Strojarskog fakulteta u 1991. godini
Language: hrvatski
Place: Slavonski Brod
Year: 1992
Pages: from 287 to 297
- Type of paper
: Paper in proceedings
Title: Control on persolan computer bending defloctions of work
piece by turning cutting processes
- Authors:
- Vnučec, Zdravko (52733)
Proceedings title: XI međunarodno savjetovanje BIAM 92
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 30 to 35
Meeting: XI Međunarodno savjetovanje BIAM '92
Held: from 06/16/92 to 06/17/92
Summary: Control of bending deflections of work pieces by turning
cutting processes is described. Propcessing on personal computer was
developed for control of the optimal parameters by turningcutting
processes.
Keywords: Bending deflection,turning cutting, software system
- Type of paper
: Paper in proceedings
Title: Computer application in steel structure load-carrying
capacity control
- Authors:
- Vnučec, Zdravko (52733)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 185 to 192
Meeting: Suvremeni trendovi proizvodnog strojarstva
Summary: Computer (PC) data processing of the tensometer stress
measurements on load-carrying structures makes it possibile to get the
results quickly and easily. An application of the TORANJ system is
presented in this paper.
Keywords: Load-carrying capacity, of the steel structure, tensometer-measurement, data processing, software system
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Ergić, Todor (61426)
Proceedings title: Zbornik radova Strojarskog fakukteta u 1991. godini
Language: hrvatski
Place: Slavonski Brod
Year: 1992
Pages: from 175 to 186
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Ergić, Todor (61426)
Proceedings title: Zbornik objavljenih radova djelatnika SF u 1990.godini
Language: hrvatski
Place: Slavonski Brod
Year: 1991
Pages: from 99 to 104
Meeting: Jugoslavenski kongres teorijske i primjenjene mehanike
Held: from 05/28/90 to 06/01/90
- Type of paper
: Paper in proceedings
Title: New Informations Technologies-Manufacturing Management
- Authors:
- Damjanović-Živić, Dobrila (130785)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 39 to 46
Meeting: Suvremeni trendovi proizvodnog strojarstva
Summary: The importante of the new informtion technologies in
production system is discussed in this work. The sub-system for the dynamic
monitoring of a production processes and its role in decision making
strategies is particulary explained.
Keywords: Manufacturing management, new information, technologies, expert systems
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Damjanović-Živić, Dobrila (130785)
Proceedings title: Održavanje industrijske opreme
Language: hrvatski
Place: Osijek
Year: 1992
Pages: from 76 to 85
Meeting: Jugoslavenski kongres teorijske i primjenjene mehanike
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Lukačević, Zvonimir (30953)
- Gajzler, Zdenko (144125)
Proceedings title: Zbornik radova XI Međunarodno savjetovanje BIAM'92
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 1 to 7
Meeting: XI Međunarodno savjetovanje BIAM '92
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Lukačević, Zvonimir (30953)
- Gajzler, Zdenko (144125)
Proceedings title: Zbornik radova Međunarodno savjetovanje Materijali i zavarivanje u naftnim....
Language: hrvatski
Year: 1992
Pages: from 285 to 294
Meeting: Međunarodno savjetovanje Materijali i zavarivanje u naftnim i petrokemijskim postrojenjima
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Trifunović, Borislav (176531)
Proceedings title: Zbornik objavljenih radova djelatnika SF u 1990.godini
Language: hrvatski
Place: Slavonski Brod
Year: 1991
Pages: from 105 to 110
Meeting: Jugoslavenski kongres teorijske i primjenjene mehanike
Held: from 05/28/90 to 06/01/90
- Type of paper
: Paper in proceedings
Title: Computer aided System for Production and assembly
Management-ASUPIM
- Authors:
- Majdandžić, Niko (69793)
- Filep, Radovan (144114)
- Damjanović-Živić, Dobrila (130785)
Proceedings title: Industrijski sistemi - IS'90
Language: hrvatski
Place: Novi Sad, Jugoslavija
Year: 1990
Pages: from 705 to 709
Meeting: Naučna konferencija Industrijski sistemi - IS'90
Held: from 06/21/90 to 06/23/90
Summary: This program product automates the process of
planning,terminating and assembly on the shop-floor level,
controllingresources and material used bz a method of making better use
ofresources. ASUPIM manages to reduce the manufacturing costs bymore
precise matching of subcontractors delivery terms with thoseplanned.
The user is led throught the product by a menu, and hasadditional choice of
instructions and program descriptions of thegeneral kind, along with a set
of HELP functions.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Majdandžić, Niko (69793)
- Nikolaš, Ante (140551)
Proceedings title: Proceedings of the 1990 International conference on engineering design
Language: engleski
Place: Zagreb
Year: 1990
Pages: from 734 to 749
Meeting: ICED'90
Held: from 08/28/90 to 08/31/90
Summary: The concept of the information system for production
management(ASIP) that was developed for the application in the macinery
industry production systems if shown in the article.
The devision on subsystems was made and contect and fuctions of subsystem
werw described.
Automation systems for production and assembling management was separately
performed, (ASUPIM), as well as experiences in it's five years application.
- Type of paper
: Paper in proceedings
Title: Abour some problems of development information-management
system in enterprises
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Industrijski sistemi-IS'90
Language: hrvatski
Place: Novi Sad, Jugoslavija
Year: 1990
Pages: from 107 to 112
Meeting: Naučna konferencija Industrijski sistemi - IS'90
Held: from 06/21/90 to 06/23/90
Summary: In the work are given problems of development, introduction
and application of Informational-management systems in enterprises of metal
industry. Also, it was perfomed analysis effectivity of application and
defined possibly way of development and introduction of some application
and undersystems throught Information system to the system Computer
Integrated Manufacturing.
- Type of paper
: Paper in proceedings
Title: Results and experience in production management and
production planning computer assisted instruction of students at the
faculty of mechanical engineering in Slavonski Brod
- Authors:
- Majdandžić, Niko (69793)
- Damjanović-Živić, Dobrila (130785)
- Sedmak, Mladen (128030)
Proceedings title: Tehnologije suvremenog komuniciranja
Language: hrvatski
Year: 1990
Pages: from 170 to 187
Meeting: VI. savjetovanje sith o informacijskim sustavima u tehnološkom razvoju
Summary: Owing to the rapid development of production system in the
world and over increasing use of technologies in production processes of
developed countries specialists in the fields are confronted with the need
to keep well informed of the basic principles of world accepted
technologies and with their inventiveness and creativity to carry the
responsibility for their progress in the future.
This work gives the results of application of interactive work of students
in all phases of computer assisted educational process.Within the framework
of this process a teaching software has been developed and the results of
the two types of instruction,traditional and computer based, are presented
in this work.
In order to get students ascquanted with the highly developedtechnologies
with the software packages,laboratories have beencontinually developed.
Some of them are:PC-laboratory-specialized classroom for this type of
instructionwith 10 PC computers in Novell network, CAM-laboratory with
themodel of robot in automated production. The aim is to completethe whole
process, from designing, documentation drawing,development of technology to
product manufacturing in theinstruction of students of the Faculty of
Mechanical Engineeringin Slavonski Brod.
The resulst shown are obtained by following 3 year realizationof this
program.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Zbornik radova djelatnika SF u 1991. godini
Language: hrvatski
Place: Slavonski Brod
Year: 1991
Pages: from 99 to 115
- Type of paper
: Paper in proceedings
Title: From individual programmes to computer integrated
manufacture
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from H-1 to H-20
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/09/92 to 05/09/92
Summary: The paper deals with basic trends in information
technologies and with concepts for development of computer integrated
manufacture in industries and institutions of developed countries.
Evaluation of the situation here is given and analysis made of papers
presented for the CIM section of the meeting. From the analysisthe expected
trends of development have been defined for various manufacturing systems
in our country.
Keywords: Information technology, information systems, computer integrated manufacture
- Type of paper
: Paper in proceedings
Title: Cutting conditions for low powered machine tools
- Authors:
- Cvjetičanin, Mirko (7441)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 101 to 106
Meeting: Suvremeni trendovi proizvodnog strojarstva
Summary: Paper presents approach to defining cutting conditions for
low powered machine tools. Outside and inside turning cutting data for
aluminum based material are matter of subject.
Keywords: Cutting data, machine tools, power
- Type of paper
: Paper in proceedings
Title: System for computer aided steel selection
- Authors:
- Krumes, Dragomir (60515)
Proceedings title: Proceedings of the 1990 International conference on engineering design
Language: engleski
Place: Zagreb
Year: 1990
Pages: from 1307 to 1311
Meeting: ICED'90
Held: from 08/28/90 to 08/31/90
Summary: A fast and efficient system for Personal Computer aided
steel selection was developed.
The selection is perfomed on the basis of general and particular properties
of steel.
The logic applied for selection is the one normally used without the aid
of computer.
Individual properties data are stored in files and databases.
The program enables acces to these files and selection of steel for user
specification as well as browsing through the data for the selected steel
sorts.
Full interaction between PC and the user was established, which enables
quick retrieval and implementation of the any program module.
- Type of paper
: Paper in proceedings
Title: Influence of austempered ductility on mechanical and
tribological properties of ductile iron
- Authors:
- Krumes, Dragomir (60515)
Proceedings title: Zbornik objavljenih radova djelatnika SF Slavonski Brod u 1990 godini
Language: hrvatski
Place: Slavonski Brod
Year: 1991
Pages: from 35 to 44
Meeting: Nove tehnologije toplinske obradbe metala
Held: from 06/13/90 to 06/14/90
Summary: The paper discusses the influence of austempered ductile
iron onbainite structure.
The results of testing mechanical propertis of standard quality austempered
ductile iron which was not sumitted to heat treatment are also given
Tribological (abrasive and adhezive)properties of austempered ductile iron
were also tested.
- Type of paper
: Paper in proceedings
Title: Reflection of austempering on mechanical properties of
ductil iron NL700
- Authors:
- Krumes, Dragomir (60515)
- Matejiček, Franjo (69056)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 37 to 44
Meeting: Suvremeni trendovi proizvodnog strojarstva
Summary: The influence of isothermal transformation of ductil iron
NL700 on structure of upper and lower bainite was investigated.
By isothermal tempering of perlitic ductil iron it is possible to
increase mechanical properties: hardness HV, strenght Rm,Rp0,2, elongation
A, by keeping the value of toughness KV.
The investigation of fracture toughness KIc showed that isothermal
tempering considerabli influences increase of fracture toughness what
decrease the danger of appearance of brittle fracture.
Keywords: Austempered ductil iron (ADI), mechanical properties, fracture toughness
- Type of paper
: Paper in proceedings
Title: Conception and Results the ASUP Programme System in the
Planning and Monitoring of Manufacture, Assembly and Project
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Advances Manufacturing Systems and Technology
Language: engleski
Place: Udine, Italy
Year: 1993
Pages: from 311 to 319
Meeting: Third international conference on advanced manufacturing systems and technology AMST'93
Held: from 04/26/93 to 04/27/93
Summary: The paper deals with the conception, mathematical model
andstructure of the ASUP data base - the computerized system forproject
management - developed at the University of OsijekMechanical Engineering
Faculty. Developed on our own analyticmodel based on graphic metod know as
gray-Kidd algorithm, theASUP systems has numerous advantages over the
available worldknow programme packages for the planning and monitoring
ofprojects. They are:
- automatic control and selection of equipment, material andtools at stock
according to schedule, definition of activities(required docimentation,
equipment, mechanization, tools andcontivances) and requirments plans in
accordance with expirationdates,
- definition of operations of activities and in this wayconnection of
planning of activities and schedulling ofoperations (assembly and
manufacture, maintenance etc.),
- automatic plan updating in accordance with the aggregate statusof the
project realization by reporting on job completion,
- optimization of project duration.
The experience acquired from the programme implementation anduse is also
described in the paper. The programme is used as anindependent system for
project management in engineering anddesign firms. In companies engaged in
erection of objects theASUP system in built into the site computerized data
processingsystem. In engine factories the programme in used integrated
intothe factory computerized data processing system - ASUP forplanning the
activities of all departments and for preparation,manufacturing and
assembly of products. It is also in the processof development as a planning
and monitoring concept for CIMsystems. Apart from this the programme is
intended for repairplanning and monitoring as a part of the maintennance
controlcomputerized data processing system - ASUR implemented and usedin
Balakovskaja nuclear power plant in Russia.
Keywords: Computerized system, Project management, Planing
- Type of paper
: Paper in proceedings
Title: Information System for Production Management (ASIP)
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Information technology interfaces
Language: engleski
Place: Pula
Year: 1993
Pages: from 129 to 134
Meeting: Proceedings of the 15th International Conference on Information Technology interfaces
Held: from 06/15/93 to 06/18/93
Summary: The concept of the information system for production
management(ASIP) that was developed for the application in the
machineryindustry production systems is shown in the article.
Automationsystem for production and assembling management is
separtelydescribed (ASIP) as well as experiences in the ten years of
itsapplication. ASUP os also used as an independent system forproject
management in engineering and design firms. It is usedfor repair planning
and monitoring as a part of the maintenancecontrol computerized data
processing system - ASUR implemented inBalovskaja nuclear power plant in
Russia.
Keywords: Management information system, Planning introduction
- Type of paper
: Paper in proceedings
Title: CAD/CAM Package Integration into the Management
Information System of a Firm
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: DAAAM International
Language: engleski
Place: Wien, Austria
Year: 1993
Pages: from 183 to 185
Meeting: 4th International DAAAM symposium
Held: from 09/16/93 to 09/18/93
- Type of paper
: Paper in proceedings
Title: Computerization of firms - prerequisite for the CIM
strategy development
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: CIM'93 Zbornik radova
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from I-71 to I-79
Meeting: 2. savjetovanje proizvodnog strojarstsva CIM'93
Held: from 11/18/93 to 11/18/93
Summary: In the strategies of development of firms one of the most
important tasks today is the design of information system at ahigher level
of automation. The results in designing and constructing management
information systems (AIS) together with the division into types according
to the firm's main line of business are show in the paper. For the
management information systems of production and assembly works, tasks are
defined connected with the necessary integration of existing program
packages (CAD,CAM) into AIS, this being a prerequisite for the CIM system
strategy development.
Keywords: Computer integrated manufacturing, management information system,software integration
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Pozvana i uvodna predvanja CIM'93
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from I-1 to I-17
Meeting: 2. savjetovanje proizvodnog strojarstsva CIM'93
Held: from 11/18/93 to 11/18/93
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Održavanje industrijske opreme
Language: hrvatski
Place: Osijek
Year: 1993
Pages: from 39 to 53
- Type of paper
: Paper in proceedings
Title: Office management in automation information system of an
enterprise
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Informacijske i komunikacijske tehnologije u uredskom poslovanju '93
Language: hrvatski
Place: Varaždin
Year: 1993
Pages: from 35 to 39
Meeting: IV. međudnarodni simpozij Informacijske i komunikacijske tehnologije u uredskom poslovanju '93
Held: from 10/28/93 to 10/29/93
Summary: The work deals with conception of AIS-management
information system (MIS) for industrial enterprise involved in metal,
electricty and timber works. Particular emphasis is an problems
of intergrating book-keeping and technical data subsystem as well
as on integrating existing program packages (CAD,CAM) into AIS.
The content is given of the common data base - BAZAP which links
AIS subsystems and represents the software for the operation of the firm's
manager office.
- Type of paper
: Paper in proceedings
Title: The effect of the work parameters on the wear of
protective coatings of screw presses in vegetable - oil straining
- Authors:
- Krumes, Dragomir (60515)
Proceedings title: CIM'93 Zbornik radova
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from 55 to 61
Meeting: 2. savjetovanje proizvodnog strojarstsva CIM'93
Held: from 11/18/93 to 11/18/93
Summary: Testing of imported and domestic spare parts was conducted
on screw presses of one of the European manufactures. Original
carbonitrided and domestic spare parts were mass loss tested in laboratory
conditions by simulating the screw press operation in contact with
sunflower seeds. Higher resistance to wear of carbonitrided parts in
relation to cemented ones has been proved.It has been found that, apart
from a kind of protective coating,the loss of mass was significantly
affected by the proportion of the seed shells and that the velocity of
relative motion does not to any extent affect the wear.
Keywords: Screw press, protective coating, work parameters, wear
- Type of paper
: Paper in proceedings
Title: Investigation of the effect of parameters boriding on
structure, hardness and wear of steel
- Authors:
- Krumes, Dragomir (60515)
Proceedings title: CIM'93 Zbornik radova
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from 47 to 54
Meeting: 2. savjetovanje proizvodnog strojarstsva CIM'93
Summary: The effect of heat treatment-boriding parameters on
hardness and structure of carbon and alloy steels has been investigated in
the work. In addition, resistance to wear by abrasion of the borid layers
obtained (Fe2B and FeB + Fe2B) has also been tested.
Keywords: Boriding, hardness, structure
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Krumes, Dragomir (60515)
Proceedings title: Zbornik radova savjetovanja Tribologija u agroindustrijskom kompleksu
Language: hrvatski
Place: Osijek
Year: 1993
Pages: from 121 to 0
Meeting: Tribologija u agroindustrijskom kompleksu
Held: from 09/23/93 to 09/23/93
Summary: The influence of isothermal transformation of perlitic
ductiliron (ADI - Austempered ductil iron) on tribological properties was
investigated. The resultats of tribological testing on adhesion and
abrsion, wher test pieces of ductil iron have been in friction pair firstly
with steel plate and secondly with plate of ductil iron showed that wear
resistance of austempered ductiliron on bainite structure is considerable
higher iron on of thermical untreated ductil iron.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Krumes, Dragomir (60515)
- Marušić, Vlatko
Proceedings title: Zbornik radova savjetovanja Tribologija u agroindustrijskom kompleksu
Language: hrvatski
Place: Osijek
Year: 1993
Pages: from 27 to 33
Meeting: Tribologija u agroindustrijskom kompleksu
Held: from 09/23/93 to 09/23/93
- Type of paper
: Paper in proceedings
Title: The effect of heat treatment on mechanical properties of
seamless gas bottles
- Authors:
- Krumes, Dragomir (60515)
Proceedings title: Zbornik radova znanstveno-stručnog savjetovanja Toplinska obrada metala
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 1 to 0
Meeting: Znanstveno-stručno savjetovanje Toplinska obrada metala
Held: from 06/17/92 to 06/17/92
Summary: The aim of this work was to study the influence of heat
treatment parameters on mechanical properties of the steel Č8380 being used
in making gas bottles. By tempering on temperatures 650 and 675oC for 45
and 90 minutes, respecttively, the influence of these parameters on
longitudinal and transverzal strenght was evaluated. The gas bottles were
pressurised to bursting.
Keywords: Seamless gas bottle, heat treatment, mechanical properties
- Type of paper
: Paper in proceedings
Title: Influence of annealing on the fatique strenght of welded
microalloyed steels
- Authors:
- Krumes, Dragomir (60515)
Proceedings title: Zbornik radova znanstveno-stručnog savjetovanja Toplinska obrada metala
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 11 to 0
Meeting: Znanstveno-stručno savjetovanje Toplinska obrada metala
Held: from 06/17/92 to 07/17/92
Summary: The influence of annealing for relasing of the residual
stresson the fatique strenght of welded joints mikroalloyed steel NIOVAL 50
has been studied. The annealing was perfomed at three temperatures which
cover the basic area being recommended for such kind of treatment of welded
joints microalloyed steels. The results show that the properties of welded
joints decrease by annealing.
- Type of paper
: Paper in proceedings
Title: Determination the properties of Fracture Mechanics on
Steel TStE 355
- Authors:
- Matejiček, Franjo (69056)
Proceedings title: Experimental Methods in solid Mechanics merin (Prague)
Language: engleski
Year: 1993
Pages: from 69 to 69
Meeting: 10 th Danubia - Adria symposium on Experimental methods in solid mechanics merin
Held: from 09/30/93 to 10/02/93
Summary: In this spaper was analysed possibility of failure
sphericalpressure vessel on account of crack growth in HAZ of weld
andestimation of critical crack lenght. It is know that failure ofstructure
often come because crack growth is rapidly without control.Inititation
crack in weld apper in manufacturingprocess,assembling or exploitation of
pressure vessel. It is aquestion:what requirements of material must be that
appear astable crack growth? In this important influence has welded
jointspecial in HAZ in which case presume a critical zone instructure.
Practical share of this work is experimentaldetermination properties of
EPFM as CTODm and J-R curve.
This properties was determinate on specially welded steel plateswith
K-notch (different as on realn contruction with X-notch)because in this
case is possible initiation crack making in planewith same structure. So
welded plates was cutted on severalthree-point bend specimens. Was prepared
specimens (42x42x200 mm)with Chevron's notch and fatigue crack in according
ASTM E 813.
Test was provided on temperature of -10 oC (design lowesttemperature)
during was recorded two diagrams: load versusloadline displacement and load
versus crack opening dicplacementmeasured at the notch edge. Calculation
and interpretation ofresults was provided in according with BS 5762/79 and
ASTM E 813.In point of maximum load Fm was calculated CTODm which,
inconsideration on location of initial (HAZ) was high (0,9 to 2,6mm). In
this paper was also presented results of JIc and J-Rcurves.
As well know stress level in spherical pressure vessel it possible
calculate in according with determinated CTODm, maximumlenght of detected
crack in construction.
Numericcaly (FEM) was calculated JR - a curves for differentsupposed crack
depth and stress level. In according withRatwani's procedure was
determinated critical dimension of crackand compared with above results.
Results, which obtained , to be able estimated that so welded join on
steel TStE 355 has an affect of stable crack growth.
- Type of paper
: Paper in proceedings
Title: J - Integral fem solution for stress - strain real
dependence
- Authors:
- Matejiček, Franjo (69056)
Proceedings title: Experimental methods in solid mechanics merin (Prague)
Language: engleski
Place: Prag, Czech Republic
Year: 1993
Pages: from 67 to 67
Meeting: 10 th Danubia - Adria symposium on Experimental methods in solid mechanics merin
Held: from 09/30/93 to 10/02/93
Summary: Calculating J - integral in a real structure is very
difficultowing to at least two problems: complex structure of asymmetric
shape and real stress-strain dependence in highly strained area in crack
zone.
A possible approach to solve some of these problems in a numerical way
(FEM) is explained in this paper. This includes experimental determination
of stress-strain real dependence followed by analytical exploration, in the
form of exponential function, of the corresponding formula. It is possible
for ex. to treat a welded joint as a different materials in the joint thus
having different stress-strain dependence.
It has been pointed out that the sharpe of the singular element at the
crack opening ought to be changed when certain value of deformation is
reached. The results are found to correspond very well to the experimental
when J-integral is calculated by using one type of singular element in the
linear elastic deformation zone and another type in the elastic - plastic
zone.
The results of these calculation have been checked at J-integral3PB
specimens testing, while the exactness of the method has been checked in
accordance with the reference solution given by ESIS-Technical Committee 8
for numerical methods.
- Type of paper
: Paper in proceedings
Title: Research into the effects of laser beam surface hardening
of steel
- Authors:
- Krumes, Dragomir (60515)
Proceedings title: Zbornik radova Međunarodne konferencije
Language: hrvatski
Place: Slavonski Brod
Year: 1995
Pages: from 215 to 220
Meeting: Obrada materijala laserom
Held: from 06/01/95 to 06/03/95
Summary: The paper presents the results of research of surface
hardening
by laser beam transformation on specimens of structural steels
for improwement and tool steels when kontinuous 1,5 kW laser CO2
in used.The possibility has been investigated of the use of laser
CO2 focides beam on carbon or alloy steels in the case of surface
structural transformation hardening, as well as the possibility
of calculating laser beam flow.
Keywords: - Laser CO2 - Steel - Surface transformation hardening
- Type of paper
: Paper in proceedings
Title: The influence of heat treatment on mechanical and
structura properties of nodular castings
- Authors:
- Krumes, Dragomir (60515)
Proceedings title: II Međunarodni naučnostručni skup
Language: hrvatski
Place: Slavonski Brod
Year: 1995
Meeting: Tedencije u razvoju mašinskih konstrukcija i tehnologija
Summary: The paper examines the influence of isotermal
transformation
of nodular casting on the structure of bainite.The results of
examination of mechanichal properties of standard quality
nonheat treadet as well as isothermally improved nodular castings have been
presented.
Trough isothermal transformation of the nodular casting
mechanichal properties, such as hardness,strength,elongation
with retention of the toughness can be increased.
Keywords: - nodular casting - Ishotermal transformation - bainite structure
- Type of paper
: Paper in proceedings
Title: PC APPLICATION IN SELECTOIN OF MATERIALS
- Authors:
- Krumes, Dragomir (60515)
Proceedings title: II Međunarodni naučno-stručni skup
Language: hrvatski
Place: Slavonski Brod
Year: 1995
Meeting: Tedencije u razvoju mašinskih konstrukcija i tehnologija
Summary:
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Krumes, Dragomir (60515)
Proceedings title: Zbornik znanstveno-stručnog skupa
Language: hrvatski
Place: Slavonski Brod
Year: 1994
Pages: from 101 to 109
Meeting: Agresivnost medija i pouzdanost opreme
- Type of paper
: Paper in proceedings
Title: The Effect of H2S on Borid Layers of steelin oil
Exploitation
- Authors:
- Krumes, Dragomir (60515)
Proceedings title: Zbornik radova međunarodnog savjetovanja
Language: hrvatski
Place: Zagreb
Year: 1994
Pages: from 19 to 27
Meeting: Toplinska obrada metala
Summary: Exploation of oil and gas from deep acid wells with
hydrogen
sulphide results very intensive abrasion and corrosion of steel
materials.
Boriding steels can primarily be, used for the purpose of reducing
mechanical (abrasive and erosive) effect of the fluids.
However the present paper also considers their corrosion protection role by
using hydrogen induced cracking (HIC) method
in standard agressive NACE-TM-01-77 solution.
- Type of paper
: Paper in proceedings
Title: Einfluss der Vibrationen auf Warmebehandlungparameter
- Authors:
- Krumes, Dragomir (60515)
Language: njemački
Place: Maribor, Slovenija
Year: 1994
Pages: from 229 to 231
Meeting: 5. Internationales DAAAM Symposium
Held: from 10/27/95 to 10/29/95
- Type of paper
: Paper in proceedings
Title: Influence of the fluidized bed on corrosion and erosion of
the boiler facilites
- Authors:
- Krumes, Dragomir (60515)
Language: engleski
Place: Slavonski Brod
Year: 1995
Pages: from 141 to 150
Meeting: V. medzinarodna konferencia
Summary: This paper adresses the sorbent addition method of
desulphuring
in the fluidized bed boilers and its influence of corrosion
and erosion of the in-built metal.
After many years of operation control of the facilities and analysis of
material, the critical points where corrosion and
erosin effects of flint sand ocur have been established.
The komparative analyises with the similar facilities without
the process of desulphuring indicates decrease in corrosion
and the increase in erosion.
Using standard laboratory methods, diverse materials in approximately the
same aggressive medium have been tested and the measures for improvement of
the equipment for the fluidized bed combustors been elaborated.
Keywords: - fluidized bed - combustor - iron materials - corrosion - erosion
- Type of paper
: Paper in proceedings
Title: An Insight into the Deamalgamation Process in
Silver-Tin-Base Amalgams
- Authors:
- Krumes, Dragomir (60515)
Proceedings title: Sont-5
Language: engleski
Place: Zagreb
Year: 1995
Pages: from 127 to 132
Meeting: Sont-5
Held: from 09/25/95 to 09/27/95
Summary: A number of research initiatives concerning the study of
deamalgamation phenomena in the quaternary metal Ag-Sn-Cu-Hg
amalgam is surveyed.The powder metallurgy route and reaearch goals are
emphasized. The performance of a simple deamalgamation
apparatus was tested. Preliminary data on deamalgamation of both
the dentistry amalgam scraps and the model Ag70-Sn17-Cu13 alloy,
prepared by vacuum melting , were obtained by metallography,
Vickers hardness microindentation, X-ray diffractometry and DTA techniques.
Finally, the above results are described and interpreted.
Keywords: deamalgamation process, silver-tin-base (Ag-Sn-Cu-Hg) amalgams, regeneration cycle, recycling, X-ray diffraction, observation, microhardness testing, DTA measurements.
- Type of paper
: Paper in proceedings
Title: Heat treatment parameters and the corrosion rate of the
stainless steel
- Authors:
- Krumes, Dragomir (60515)
Place: Slavonski Brod
Year: 1995
Pages: from 240 to 321
Meeting: CIM'95
Summary: The paper examines the influence of temperature and heat
treatment time as well as alloy elements on corrosion resistance
of the austentic stainless steel.The existance of the presupposed
mechanism of the corrosion process has been proved, as well as
the vital interdependence of the change of structure with the
decrease of corrosion resistance of the austenitic steel
ASTM A 240, type 321.
Keywords: - Stainless steel - Corrosion rate - Heat treatment parameters
- Type of paper
: Paper in proceedings
Title: Optimierung der Behandlungsharteparameter auf gerat mit
Magnetbeweglichem elektrischem bogen
- Authors:
- Krumes, Dragomir (60515)
Language: njemački
Place: Slavonski Brod
Year: 1995
Meeting: 6. Internationales DAAAM Symposium
Held: from 10/26/95 to 10/28/95
Summary: Als Ergebniss der durchgefuhrten theoretischen
Untersuchungen,
sowie eigenen experimentellen Versuche, enstand ein Gerat zur
Erwarmung der Stahle durch magnet-beweglichem Hilfselektrode
(MPL-PE).MPL-PE wurde in Djuro Djakovic Institut und Fakultet
fur Maschinenbau in Slavonski Brod projektiert und angefertigt.
(Patent von D.Knezevic). Der vorteil dieses Gerats im Vergleich
mit den klasischen Induktionsgerate ist wesentlich wichtig und
bezieht sich vor allem auf:grosere Erwarmungsgeschwindigkeit,
verminderten Enargieverbrauch und einfachere und kleinere Bauweise.
- Type of paper
: Paper in proceedings
Title: Structure and Scheduling Strategies for flexibel
Assemblbly System-
- Authors:
- Katalinić, Branko (73512)
Proceedings title: Final Report
Language: engleski
Place: Wien, Austria
Year: 1993
ISBN/ISSN: 1330-3651
Meeting: Interuniversitary Center for CIM
- Type of paper
: Paper in proceedings
Title: CIM konzept kot sestevni del proizvodne
- Authors:
- Katalinić, Branko (73512)
Proceedings title: Naše gospodarstvo
Language: slovenski
Place: Portoroz, Slovenija
Year: 1994
ISBN/ISSN: 0547-3101
Pages: from 575 to 576
Meeting: XXI. Internationales Wissenschaftlichers Symposium uber Unternehmensplanung
Held: from 10/19/94 to 10/21/94
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Katalinić, Branko (73512)
- Editors
- Ažman, Jasna (193616)
Proceedings title: CIM 93
Language: hrvatski
Place: Zagreb
Year: 1993
Meeting: 2. međunarodno savjetovanje proizvodnoga strojarstva
Held: from 11/18/93 to 11/18/93
- Type of paper
: Paper in proceedings
Title: Comparison between Experimental and Numerical Methods for
Determining crack Resistance Curves
- Authors:
- Matejiček, Franjo (69056)
- Kozak, Dražen
Language: engleski
Place: Slavonski Brod
Year: 1995
Meeting: 10 th Danubia - Adria symposium on Experimental methods in solid mechanics merin
Held: from 10/05/95 to 10/07/95
- Type of paper
: Paper in proceedings
Title: Complex Flexible Manufacturing Systems
- Authors:
- Katalinić, Branko (73512)
Proceedings title: Design of Control Structures and Scheduling Strategies
Language: engleski
Year: 1993
Meeting: 25th CIRP International Seminar
Held: from 04/22/93 to 04/23/93
- Type of paper
: Paper in proceedings
Title: Auslegung und Steuerung von flexiblen Montagesystemen
- Authors:
- Katalinić, Branko (73512)
Proceedings title: Automation und Metrologie:Mensch,Technik,Umwelt
Language: njemački
Year: 1993
Pages: from 147 to 148
Meeting: 4th International DAAAM symposium
Held: from 09/16/93 to 09/18/93
- Type of paper
: Paper in proceedings
Title: Auslegung einer robotisierten Zelle fur die
Kommissionierung von Teilen vor der Montage
- Editors
- Katalinić, Branko (73512)
Proceedings title: Automation und Metrologie:Mensch,Technik,Umwelt
Language: njemački
Year: 1993
Pages: from 145 to 146
Meeting: 4th International DAAAM symposium
Held: from 09/16/93 to 09/18/93
- Type of paper
: Paper in proceedings
Title: Intelligent Scheduling of Robotized Flexible Assembly
System
- Authors:
- Katalinić, Branko (73512)
Proceedings title: Imeko
Language: engleski
Year: 1993
Meeting: International Coference ISMCR-93
Held: from 09/21/93 to 09/24/93
- Type of paper
: Paper in proceedings
Title: Computer- Aided Engineering System for Die/Mold Design and
Manufacture
- Authors:
- Katalinić, Branko (73512)
Proceedings title: Manufacturing Technology and Computer Integrated Manufacturing
Language: engleski
Year: 1994
Meeting: Proc.3rd International Conference on Automation Technology
Held: from 07/06/94 to 07/09/94
- Type of paper
: Paper in proceedings
Title: Megatrends in der Automatisierung der Produktion
- Authors:
- Katalinić, Branko (73512)
Proceedings title: Automation und Metrologie:Herausforderungen und Chancen
Language: njemački
Year: 1994
Pages: from 197 to 198
Meeting: 5. Internationales DAAAM Symposium
Held: from 10/27/94 to 10/29/94
- Type of paper
: Paper in proceedings
Title: Steuerungsstrategien des flexiblen Montagesystems
- Authors:
- Katalinić, Branko (73512)
Proceedings title: Automation und Metrologie:Herausforderungen und Chancen
Language: njemački
Year: 1994
Pages: from 199 to 200
Meeting: 5. Internationales DAAAM Symposium
Held: from 10/27/94 to 10/29/94
- Type of paper
: Paper in proceedings
Title: Computersimulation fur Optimierung der Struktur des FFS
- Authors:
- Katalinić, Branko (73512)
Proceedings title: Automation und Metrologie:Herausforderungen und Chancen
Language: njemački
Year: 1994
Pages: from 201 to 202
Meeting: 5. Internationales DAAAM Symposium
Held: from 10/27/94 to 10/29/94
- Type of paper
: Paper in proceedings
Title: Expertensystem fur die Optimierung der Produktionsablaufe
beim FFS
- Authors:
- Katalinić, Branko (73512)
Proceedings title: Automation und Metrologie: Herausforderungen und Chancen
Language: njemački
Year: 1994
Pages: from 203 to 204
Meeting: 5. Internationales DAAAM Symposium
Held: from 10/27/94 to 10/29/94
- Type of paper
: Paper in proceedings
Title: Flexible Manufacturing/Assembly Systems:Implemenation of
Intelligence
- Authors:
- Katalinić, Branko (73512)
Proceedings title: CIRP
Language: engleski
Year: 1995
Meeting: 5nd International Workshop on Learning in Intelligent Manufacturing Systems
Held: from 04/20/95 to 04/21/95
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Katalinić, Branko (73512)
Proceedings title: CIM 93
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from V to XIX
Meeting: 2. međunarodno savjetovanje proizvodnoga strojarstva
Held: from 11/18/93 to 11/18/93
- Type of paper
: Paper in proceedings
Title: Simulation als Werkzeug bei der Auslegung und Steuerung
des FFS fur Blechbearbeitung
- Authors:
- Katalinić, Branko (73512)
Language: njemački
Year: 1994
Pages: from 9 to 12
Meeting: Proceedings of the 12th International Conference BIAM 94
Held: from 06/23/94 to 06/24/94
- Type of paper
: Paper in proceedings
Title: Expertensysteme bei der intelligenten Steuerung von
komplexen flexiblen Systemen
- Authors:
- Katalinić, Branko (73512)
Language: njemački
Year: 1994
Pages: from 57 to 60
Meeting: Proceedings of the 12th International Conference BIAM 94
Held: from 06/23/94 to 06/24/94
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Matejiček, Franjo (69056)
Proceedings title: Agresivnost medija i pouzdanost opreme
Language: hrvatski
Place: Slavonski Brod
Year: 1994
Pages: from 89 to 100
Meeting: In memoriam Anici Belić
Held: from 10/06/94 to 10/06/94
Summary: The paper presents simplified formulas and approaches of
fracture
mechanices (FM) for component reliability assessment using FM
parameters.Possibilities of FM usage for components exposed to
aggressive media are given, when cracks may initiate and propagate.Formulas
for SCC in case of static loading and for
corrosion fatigue in case of dynamic loading have been dscribed.
Discussed FM formulas enable reliability, remaining life and defect
criticality assessment for corrosion environment conditions.
Keywords: - fracture mechanics - stress corrosion cracking (SCC) - corrosion fatigue
- Type of paper
: Paper in proceedings
Title: Besonderheiten der Ingenieurausbildung an der
Maschinenbaufakultat in Slavonski Brod
- Authors:
- Matejiček, Franjo (69056)
Language: njemački
Year: 1995
Pages: from 77 to 84
Meeting: 100 Jahr Technikausbildung in Bremen
Held: from 09/28/94 to 09/29/94
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Cvjetičanin, Mirko (7441)
Proceedings title: Zbornik radova XI međunarodno savjetovanje BIAM 92
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 32 to 36
Meeting: XI Međunarodno savjetovanje BIAM '92
Held: from 06/16/92 to 06/20/92
Summary: Paper discusses and analyzes three possible ways inflexible
manufacturing system integration. First based on networking but expensive,
second hard-wired but not reliable and third based on software logical
switches suitable for educational numerically controlled machine tools. The
full range of simple part program preparation commands has been presented
too.
- Type of paper
: Paper in proceedings
Title:
- Editors
- Cvjetičanin, Mirko (7441)
Proceedings title: Zbornik radova XI Međunarodno savjetovanje BIAM 92
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 7 to 10
Meeting: XI Međunarodno savjetovanje BIAM '92
Held: from 06/16/92 to 06/20/92
Summary: Paper describes approach to tool driven turret head design
for educational numerically controlled lathe. For this design two general
requests have been made:
- solution has to be based on electrical power only (without hydraulic or
pneumatic source supply)
- small size of turret head beacuse educational lathe working area room
restriction
Realized solution has four places for outside turning tool and four places
for fixed and/or drven tool for inside turning with possibility for
continues speed regulation.
- Type of paper
: Paper in proceedings
Title: Planning and Controlling of General Repair in a Nuclear
Power Plant
- Authors:
- Majdandžić, Niko (69793)
- Damjanović-Živić, Dobrila (130785)
Proceedings title: 1993 Simulation MultiConference
Language: engleski
Place: San Diego, U.S.A.
Year: 1993
Pages: from 125 to 129
Meeting: 1993 Simulation MultiConference
Held: from 03/29/93 to 04/01/93
Summary: The basic concept of the Automation System for Planning and
Controlling (ASUP) developed for the application in the nuclear power plant
in the town of Balakovo, Russia, is show in this paper. In relation to
todays know information systems for planning (Optim,
Superproject,Presidence) the ASUP information system can solve some
specific problems and tasks connected with the organization and control of
general repair in complex power units:
- connections between plans by the technological dependence of repair
realization,
- automatic verification and reservation of spare parts and components in
store houses,
- shift reporting on finished works and calculation on work completion,
- controlling of planned and realized costs,
- connection between the repair activity plan and day - to day plan of
operations,
- automatic rebalance of plan.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Održavanje industrijske opreme
Language: hrvatski
Place: Osijek
Year: 1992
Pages: from 64 to 76
- Type of paper
: Paper in proceedings
Title: Information technology of production systems-current state
and trends
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from H-21 to H-30
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/09/92 to 05/09/92
Summary: The work presents the principal problems the roduction
systems
have in zhe realization of the information technology plans. The
results achieved in our country are given and the method is
suggested for the estemation of the information technology level of a
production system. In addition,one of the implemented
conceptions of the computerised data processing system is also given
together with the development plan of its integration into
the CIM system. An example is presented of the realized integration in the
product definition, technologies and materials
subsystem-DEPTO.
Keywords: - inmformation technology - information systems - computer integrated manufacture
- Type of paper
: Paper in proceedings
Title: Analysis of informatization of productive systems and
future progress concept
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Zbornik radova djelatnika Strojarskog fakulteta u 1991.godini
Language: hrvatski
Place: Slavonski Brod
Year: 1991
Pages: from 81 to 88
Summary: This paper deals with some problems of development,
introduction
and application of the informatic-management systems in enterorises of
metal industry. Perfomed is, also the analysis of
efficiency of application and here is defined a possible way of
development, introduction of some applications and subsystems
through Information system to the system of Computer Integrated
Manufacturing.
Here are explanied four separate but interrelated projects:
SCDB-Shared Common Data Base, CIM-Computer Integrated Manufacturing
Resource Planning, and CLAS-Computer-aided logistics Support.
- Type of paper
: Paper in proceedings
Title: ASUR - Automation Management Maintenance System
- Authors:
- Majdandžić, Niko (69793)
- Editors
- Damjanović-Živić, Dobrila (130785)
Proceedings title: Zbornik radova djelatnika Strojarskog fakulteta u 1991.godini
Language: engleski
Place: Slavonski Brod
Year: 1991
Pages: from 137 to 143
Meeting: Western Multiconference on Computer Simulation
Held: from 01/23/91 to 01/25/91
Summary: ASUR is software system which enables power plan unit
maintenance
control, repair and maintenance planing and preparing with optimal use of
resourses (labour,facilites,spare parts and
components and materials).
Its subsystems are: DEFEL-power production unit definition,
RDK-NAZAL-material supply and in stock, ASUPIM-planing and
controlling and FUOTK-operation and breakdown control.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Majdandžić, Niko (69793)
- Damjanović-Živić, Dobrila (130785)
- Mazurek, Miroslav (187204)
- Editors
- Damjanović-Živić, Dobrila (130785)
Proceedings title: Zbornik radova djelatnika Strojarskog fakulteta u 1991.godini
Language: hrvatski
Place: Slavonski Brod
Year: 1992
Pages: from 143 to 149
Meeting: VII Simpozijum Upravljanje proizvodnjom organizacionim sredstvima UPOS 91
Summary: In the work are given problems of development, introduction
and
application of informational-management systems in enterprises
of metalindustry. Also it was performed analisys effectivity
of application and definided possibly way of development and
introduction of some application and undersystems through
Information system to the system Computer Integrated Manufacturing.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Damjanović-Živić, Dobrila (130785)
Proceedings title: Zbornik djelatnika Strojarskog fakulteta u 1991.godini
Language: hrvatski
Place: Slavonski Brod
Year: 1991
Pages: from 169 to 176
Summary: This paper describes Artificial Intelligence application in
CIM
system. Spesially, here is discussed production experience in the
experted system application as the most important part of the
Artificial Intelligence Technology.
- Type of paper
: Paper in proceedings
Title: Information Systems Models for diferent Factories
- Authors:
- Majdandžić, Niko (69793)
- Damjanović-Živić, Dobrila (130785)
Proceedings title: IFAC'95
Language: engleski
Place: Barton, Australia
Year: 1995
Meeting: IFAC 95
Held: from 07/02/95 to 07/05/95
Summary: The paper presents experiences in the design of Information
Systems (IS) and their introduction into production companies,
the companies being divided into groups characterized by their
common requirements as to the Information System.
Research has shown that it is possible to develop subsystems
and modules which can be created as common to all groups of companies. The
paper provides an explanation of the planning
and scheduling module which satisfies a broad range of requirements of this
function in various companies.
Keywords: Production system, Information system, JIT manufacturing, Scheduling(algorithms)
- Type of paper
: Paper in proceedings
Title: Development of the subsystems and modules common to the
information systems
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Zbornik radova KoREMA
Language: hrvatski
Place: Slavonski Brod
Year: 1995
ISBN/ISSN: 953-6037-08-4
Pages: from 185 to 189
Meeting: 40.jubilarni godišnji skup KoREMA
Held: from 04/19/95 to 04/21/95
Summary: The paper presents experiences in the design of Management
Information Systems (MIS) and their introduction into production
companies, the companies being devided into groups characterized by their
common requirements as to the Management Information
System. Research has shown that it is possible to develop
subsystems and modules which can be created as common to all
groups of companies. The paper provides an explanation of the
planning and scheduling module which satisfies a broad range
of requirements of this function in various companies.
- Type of paper
: Paper in proceedings
Title: Integration of existing Program Packages into Computorized
Information processing System of a Firm
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Zbornik radova BIAM'94
Language: hrvatski
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-6037-03-3
Pages: from B-1 to B-5
Meeting: 12.Međunarodno savjetovanje BIAM 94
Held: from 06/23/94 to 06/24/94
Summary: The paper presents experience in the computerization of our
firms,gives evaluation of achieved results and points out problems
conncected with development and introduction of automated information
management systems. It offers classification of information management
systems and defines common subsystems for groups of information management
systems.
In particular it points out the problem of integrating existing
program packages of a universal type into a computerized information
processing system and gives examples of acheved
integration, the integration being one of the prerequisites for the
development of computer integrated manufacturing (CIM).
- Type of paper
: Paper in proceedings
Title: Computerized repair and maintenance management system
-ASUR
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Zbornik radova 38.Međunarodni godišnji skup KoREMA
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from 488 to 491
Meeting: 38.Međunarodni godišnji skup KoREMA
Held: from 04/26/93 to 04/28/93
Summary: The paper deals with the conception of the repair and
maintenance computerized system - ASUR, developed for the needs of the
Balakovo nuclear power station in Russia. In relatoin to todays
known information system for maintenance the ASUR displays the
following advantages:
- repair technology defined to the level of operations with
anticipated duration, required tools materials and perfomance
capacites,
- illustrations and schemes of some equipment given,
- interactive plan updating based on readiness report,
- reliability and mean working time bteween two breakdowns automatically
calculated.
- Type of paper
: Paper in proceedings
Title: Common Modules in the Maitenance Information Systems
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: DAAAM International
Language: engleski
Place: Wien, Austria
Year: 1994
Pages: from 261 to 262
Meeting: 5. Internationales DAAAM Symposium
Held: from 10/27/94 to 10/29/94
Summary: The paper presents the concept of the maintenence
information system for town heating plants - AISOT, and defines the modules
which can be used as common for various forms and functoins
of maintenance in manufacturing companies. One of the possible conceptsof
development of computer integrated maintenance for the Croation economy
needs is described.
Keywords: Computer integrated maintenance, Maintenance information system
- Type of paper
: Paper in proceedings
Title: Common Model of the Planning of Preparation ,Assembly and
Scheduling of Production
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: ITI'95
Language: engleski
Place: Zagreb
Year: 1995
Pages: from 449 to 454
Meeting: 17th International Conference,ITI 95
Held: from 06/13/95 to 06/16/95
Summary: The paper presents the model of connected planning,
preparation,
and product assembly with scheduling of parts of units. The existing models
solving either planning or scheduling have been
analysed and the need for combining these two models has been
pointed out so that the necessary terms can be obtained from the
planning model. The elaboration of parts and units has been scheduled
according to "JUST IN TIME" method, Japanese production philosophy.
Short proposition of the Planning and scheduling model, developed at the
Faculty of Mechanical Engineering in Slavonski Brod,have
been given in this paper.
Keywords: Production management,production planning,operations scheduling
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Obnova i razvoj Istočne Hrvatske
Language: hrvatski
Place: Osijek
Year: 1992
Pages: from 48 to 49
Meeting: Obnova i razvoj Istočne Hrvatske
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: XV Savjetovanje
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 226 to 239
Meeting: XV Savjetovanje o tehničkim dostignućima i ekološkim rješenjima u proizvodnji cementa i azbest-vlakno cementa
Held: from 11/05/92 to 11/07/92
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Zbornik udruženja održavatelja Hrvatske
Language: hrvatski
Place: Opatija
Year: 1994
Pages: from 45 to 64
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Majdandžić, Niko (69793)
Proceedings title: Zbornik radova stručnog kolokvija Informatizacija održavanja
Language: hrvatski
Place: Osijek
Year: 1993
Pages: from 5-3 to 5-10
Meeting: Informatizacija održavanja
Held: from 02/12/93 to 02/12/93
- Type of paper
: M.A.
Title:
Faculty: Fakultet strojarstva i brodogradnje Sveučilište u Zagrebu
Author: KOZAK DRAŽEN
Date of defense: 07/07/95
Language: hrvatski
Number of pages: 71
Summary: The fracture mechanics properties used for studyng of body
with
cracks in linear-elastic or elastic-plastic region dependent of the
plasticity ratio at the crack tip, were seperately analyzed.
So, in the first part of this work some known analitycal solutions for
stress intensity factor (SIF) at the crack tip were given. Procedure for
evaluation and determination of fracture
toughness was described. Numerical solutions for SIF obtained
by finite element method, were compared with analitycal solutions.The
differences were neglected. To make any package of
FEM software usable,method of displacements and isoparametric
elements were explained.On the example of collapsed 8-node traingle
isoparametric element with midside node shifted in 1/4,
functions of displacements and strains, which include singularity
at the crack tip, were derived.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: KRUMES DRAGOMIR
Date of defense: 04/11/95
Number of pages: 51
Author: Pilipović Žarko
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: KRUMES DRAGOMIR
Date of defense: 02/08/94
Number of pages: 49
Author: Jerković Zlatan
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: KRUMES DRAGOMIR
Date of defense: 03/24/93
Number of pages: 61
Author: Barkić Ljiljana
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: KRUMES DRAGOMIR
Date of defense: 02/27/91
Number of pages: 60
Author: Šestak Goran
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: KRUMES DRAGOMIR
Date of defense: 01/27/94
Number of pages: 86
Author: Tomašek Katica
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: KRUMES DRAGOMIR
Date of defense: 12/22/94
Number of pages: 65
Author: Živković Ivica
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: KRUMES DRAGOMIR
Date of defense: 09/14/94
Number of pages: 92
Author: Martinović Anica
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: KRUMES DRAGOMIR
Date of defense: 06/28/94
Number of pages: 63
Author: Matanović Slavica
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: KRUMES DRAGOMIR
Date of defense: 04/28/95
Number of pages: 73
Author: Radić Anela
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: KRUMES DRAGOMIR
Date of defense: 01/25/95
Number of pages: 79
Author: Gruičić Snježana
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: KRUMES DRAGOMIR
Date of defense: 06/19/95
Number of pages: 72
Author: Jozanović Paulina
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: KRUMES DRAGOMIR
Date of defense: 04/27/94
Number of pages: 62
Author: Jurić Sanja
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: KRUMES DRAGOMIR
Date of defense: 04/25/91
Number of pages: 93
Author: Kladarić Ivica
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: KRUMES DRAGOMIR
Date of defense: 05/24/91
Number of pages: 67
Author: Kezele Željka
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: KRUMES DRAGOMIR
Date of defense: 01/23/91
Number of pages: 95
Author: Kršan Josip
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: KRUMES DRAGOMIR
Date of defense: 11/19/93
Number of pages: 89
Author: Dolovčak Sunčica
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: KRUMES DRAGOMIR
Date of defense: 04/14/93
Number of pages: 81
Author: Čizmar Atila
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 04/24/94
Number of pages: 73
Author: Siničić Mirko
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 12/07/93
Number of pages: 48
Author: Sarić Marija
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 01/12/95
Number of pages: 55
Author: Stipešević Marin
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 06/16/93
Number of pages: 55
Author: Štraleger Dragan
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 12/07/94
Number of pages: 81
Author: Mandić Darko
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 06/16/93
Number of pages: 95
Author: Mihić Boris
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 05/14/92
Number of pages: 47
Author: Mirosavljević Vesna
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 05/10/94
Number of pages: 39
Author: Jakopović Zoran
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 06/04/93
Number of pages: 118
Author: Čuljak Melita
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 01/15/93
Number of pages: 78
Author: Boček Goran
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 07/14/95
Number of pages: 69
Author: Princip Renato
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 07/14/95
Number of pages: 50
Author: Stanić Antun
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 07/14/95
Number of pages: 68
Author: Glavić Blažo
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 05/25/94
Number of pages: 80
Author: Soldo Božidar
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 04/25/91
Number of pages: 80
Author: Stoić Marko
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 11/19/93
Number of pages: 84
Author: Szugyi Mirta
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 06/28/94
Number of pages: 50
Author: Šarčević Željko
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 01/27/94
Number of pages: 90
Author: Šimunović Goran
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 06/28/94
Number of pages: 52
Author: Veldin Vitomir
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 06/24/93
Number of pages: 44
Author: Lujić Roberto
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 06/22/92
Number of pages: 106
Author: Marković Božidar
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 02/24/95
Number of pages: 68
Author: Marković Zoran
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 06/23/95
Number of pages: 73
Author: Matičević Tihomir
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 12/22/94
Number of pages: 100
Author: Mendeš Nikola
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 02/24/95
Number of pages: 74
Author: Ostić Danijel
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 02/26/92
Number of pages: 74
Author: Rukavina Ivica
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 12/20/91
Number of pages: 99
Author: Horvatović Borislav
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 07/20/93
Number of pages: 71
Author: Jerković Olivera
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 06/28/94
Number of pages: 39
Author: Jurkić Marija
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 05/14/92
Number of pages: 93
Author: Kosić Slobodan
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 01/27/94
Number of pages: 70
Author: Kušanić Ivica
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 06/23/95
Number of pages: 92
Author: Dašek Damir
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 01/27/94
Number of pages: 42
Author: Činkl Nataša
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 06/23/95
Number of pages: 65
Author: Bojko Tatjana
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MAJDANDŽIĆ NIKO
Date of defense: 12/21/93
Number of pages: 44
Author: Alić Aida
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MATEJIČEK FRANJO
Date of defense: 06/01/94
Number of pages: 105
Author: Brnadić Ilica
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Strojarski fakultet Slavonski Brod Sveučilište u Osijeku
Mentor: MATEJIČEK FRANJO
Date of defense: 07/11/95
Number of pages: 90
Author: Kožul Dražen
Degree level: D.A.
- Type of paper
: Computer program
Title: Sale and calculation - PROKA
- Authors:
- Majdandžić, Niko (69793)
Odering party: Plamen-Interational
Institution depot: Strojarski fakultet Slavonski Brod
HW platform: LAN mreža PC računala
Operating system: MS - DOS
Programming language: CLIPPER
Year: 1992
Summary: The main task of sale is to offer, conclude contract and
deliverproducts to the buyers and to assure all the necessarypressumptions
for it (knowing the needs of the market, abilitiesof the production
capacities from the point of the terms ofdelivery, financial possibilities
for crediting the disposal ofgoods etc.). Including the market researching,
the sale assures acontact with the surrounding and gives market elements
for thefuture development of product.
The first knowledge of buyer needs comes throught inquiry,quotation order
on conclude contract. From that moment on itnecessary to folow the buyer's
request till it is fulfilled orturned down. Primarily, it is necessery to
introdece the requestinto the normal course of busines information. ASIP
systemenables registration of requestes by putting at one's disposal:
- data on the buyer (main data, way and status of payment,special condition
of sale etc.),
- data on the products,
- registration of order or contract,
- printing of accompanying documents.
In the services are engaged with the selling function, the systemenables
the workes to:
- have a direct insight into the samo products supplies that aremade for
the sale,
- introduce the requests for production and/or acquisition,
- have insight into the status of work on preparation or inproduction,
- introduce an order for delivery,
- carry out shipment and following of the shipment of the goodsto the
buyer,
- invoice the delivered goods and to follow the payment,
- calculate the prices and follow the differences,
- plan the necessery means etc.
- Type of paper
: Computer program
Title: Product, material and technology definition - DEPTO
- Authors:
- Majdandžić, Niko (69793)
- Mazurek, Miroslav (187204)
Odering party: Plamen-Interational
Institution depot: Strojarski fakultet Slavonski Brod
HW platform: LAN mreža PC računala
Operating system: MS - DOS
Programming language: CLIPPER
Year: 1993
Summary: Departmens for designing, product development and
technologyalaboration (usually: development, designing,
construction,technology) create and maintain information on product,
materialsand processes. The information i.e. data present starting datafor
all other departments in the firm.
That is the reason for the fact that the creation of data baseand
introduction of functions of this subsystem are one of thefirst tasks when
introducting the Automation information systeminto production firms.
Fractions that have to enable this system are the following:
- Memorizing and processing of main notios as data aboutproduction element.
Production element defines each component ofthe product (part,part as a
standard product, assemblydisconnectable and undisconnectable, assembly as
somebody else'sproduct, product).
- Product structure defining (construction and productcomponents, needs for
spare parts, sets of tools for maintenance,etc.), that enables the
calculation of product elements inaccordance with the agreed quantity of
products or for the seriesdefined quantity of products.
- Definition of the main and variant technological operations
forfabrication of production elements as well as alternativetechnological
operations.
- Definition of the starting material for fabrication ofrequested quantity
of production elements that are made fromseparate parts (forgings,castings)
as well as for productionelements which are made from common starting
material (plates,profiles, pipes, etc.).
-Definition of product elements according to own production,cooperation,
asquisition.
- Calculating of the priority for production on the basis ofhierarchy
level, technological complexity and length oftechnological operations.
In the further development of the Automation system with thecomputer
integrated production in this subsystem it has beenconceived with an aim of
realization in 1995, as an integrationof the data base and function with
program systems and programpackages in the Automation system of product
designing anddevelopment - DEPTO.
In this system program equipment for designing and development ofthe
product in mechanical engineering has been developed. Themain tasks in the
system development are:
- Data base about the product,
- Choice, development and standardization of the universalprogram equipment
for the needs of engineers in mechanicalengineering,
- Choosing, developing and adoption of program equipment fordesigning the
mechanical engineering products,
- Computer graphic,
- Program equipment for engineering activities,
- Program equipment for the product development.
- Type of paper
: Computer program
Title: Asquisition and supplies - NAZAL
- Authors:
- Majdandžić, Niko (69793)
- Mazurek, Miroslav (187204)
Odering party: Plamen-Interational
Institution depot: Strojarski fakultet Slavonski Brod
HW platform: LAN mreža PC računala
Operating system: MS - DOS
Programming language: CLIPPER
Year: 1992
Summary: The essence of the acquisition work lies in material
assuranceand other resource in adequate time according to the
productionneeds.In order to be able to answer this režuest it is
necesseryto have at one's disposal accurate and actual data aboutsupplies,
orders and products that have been sent to the market.System ASIP enables
this by realization of following jobs:
- elaboration of lists-catalogues of material, spare parts,equipment, tools
and instrumentation,
- arrangement of requests for material ordering,
- keeping and maintenance of reservations,
- book-keeping (of the sale and supplies),
- planning of asquisition and
- checing whether the product is covered with supplies ofmaterial and
tools.
After main preparation for system use and material catalogue havebeen
worked out, it is possible to manage with supplies.
When entering the data about sale, and any other inquiry, dataare
automaticaly checked, and only after that are to be filed orthey affect the
data base.
In this way the data become a reflection of the momentarysituation with
supplies. This gives an opportunity to check themomentary state of
supplies, wnenever it is needed, whether onthe display, or by printing on
the list. During this procedure itis all the samo whether you with only
one or severalstorehouses.
Control of orders completes the supplies management. It includesarrangement
of requests for ordering the material, ordering ofthe material and checking
the fulfillment of the order.Connection with planning has been realized
here, because dataabout planned needs have been used.
The next group of data of interest for planning and managing ofproduction
are the data about reservations. The system enables(automated) managing of
material reservations on supplies,according to production orders as
expense carriers.
Bookkeeping treatment gives the elements for following thesupplies valute
in tyhe storehouse, values of supplies inuncompleted production as well as
the value analysis. Value hasbeen calculated by using some of commonly
used methods ofdetermination of the supplies value, and by free choice.
The system gives opportunity for checing and following of thedegree of
covered material and tool for products. That is how forexample you can
contyrol the degree of preparation of theproducts for placing them on the
market. For each product you canhave an insight (of all parts) into the
following:
- required quantity of materials and tools,
- ordered quantity of materials and tools,
- Quantity in the storehouse,
- checking the value of unfinished production.
- Type of paper
: Computer program
Title: Automation system of production and assembly management -
ASUP
- Authors:
- Majdandžić, Niko (69793)
- Kristek, Željko (130763)
- Onukijević, Josip (144386)
Odering party: "ĐĐ" Inžinjering d.d.
Institution depot: Strojarski fakultet Slavonski Brod
HW platform: LAN mreža PC računala
Operating system: MS - DOS
Programming language: CLIPPER, FORTRAN, PARADOX
Year: 1992
Summary: The ASUp system has been developed as original solution for
theplaning and monitoring of building construction jobs and sitecontrol.
Projects are show in the form of erection graphs andsecondary line ones
1.1, 2.1, 3.1.....by which activities areconnected and their
internonnection defined (Majdandžić, 1988).
Interdependance of various plans is obtained in the same way,giving the
possibility for a lower level plan to get connectedwith any higher level
plan activity be it as its beginning orend.
For every activity in ASUP it is possible to define theactivities content
(up to 99 notions) thus defining equipment,machinery, devices, tool sets or
documentation needen for thecompletion of activities.
Beginning time of any acitivity is defined in this way as well astime
limits for all other resources.
Distribution itself of the activities is performed in advance onthe main
line of erection and backwards on the secondary linesand lower plans.
ASUP also enables defining the possibility of enforcing paymentafter
completion of an activity or of building additionalequipment in making it
possible to get the plan of the expectedin - flow of means.
ASUP is provided with the capital equipment stock module. Thismakes stock
control possible (when planning activities) with therequisitioning of
equipment for due dates.
After plan elaboration and monitoring of its realization,completion is
reported. This report is given in an interactiveoperation every day or
every week as a percentage of thecompletion of a activity or in the form of
scheduled units of thecompleted job out of the totally planned.
In this way realization of plan is dinamically controlled and
thepossibility is given to obtain the state of realization.
Requirements the ASUP system has placed before the programpackages for
planning and monitoring of jobs related to thepreparation and control of
sites are:
- possibility of connecting several plans with the basic plan sothat
distribution starts backward from the given activity of theother plan or
the whole plan (quality assurance plan towardsbasic plan, subcontractors
plan etc.),
- automatic check and requisition of consumables and auxiliarymaterial,
tool, devices and equipment in stock according toschedule,
- automatic rebalance of plan in accordance with the estimateddecline from
the plan while controlling critical resources(capacities),
daily report on the completion of the plans from the job log andautomatic
calculation of the plan completion and financialstatement index,
- automatic elaboration of other plans as drawn from the basicplan (plan of
machinery, of required manpower, of materials andtools, of documentation,
plan of in - flow and out - flow ofmeans etc.),
- elaboration of plans in such a way as to use momentarilyavailable
capacities.
In the analysis of the available program packages adjusted foroperation in
LAN network or personal compuer (SUPER PROJECT, PC -PROJECT, TERMINPLANER)
it was shown that new program packages forthese requipments have to be
developed using existing planningmethods (checked through practical work)
as well as goodsolutions in the mentioted program packages.
- Type of paper
: Computer program
Title: Following the production preparation and production -
PRAPE
- Authors:
- Majdandžić, Niko (69793)
- Čuljak, Slavko (194770)
Odering party: Plamen-Interational
Institution depot: Strojarski fakultet Slavonski Brod
HW platform: LAN mreža PC računala
Operating system: MS - DOS
Programming language: CLIPPER
Year: 1992
Summary: The essence of the following of the production is in
followingthe realization of planned information course, flow of materialand
the product or servicing in agreed terms. In practice it iswell know that
even best planning and terms determination inproduction and resource do not
give positive results, if functionof qualitative following i.e. control is
missing. In order toinfluence the production consciously (to manage the
production)we need return information.
Return informations are necessary for making a decision and forcontrol of
production, by:
- production preparation,
- production,
- cooperation,
- working orders,
- uncompleted production etc.
These activities show up in such surroundings where conditionschange, and
return information obtained just in time assuresquick and necessary
corrections.
Production control is organized mostly by following theperformance
according to technological operation where the datacarrier is the working
list verifield by the productioncontroller, who defines the number of ready
- made productionelements in that operation. On the basis of this control,
therecan be achieved:
- operative information,
- statistics information and
- bookkeeping information.
- Type of paper
: Computer program
Title: Quality assurance - OSKVE
- Authors:
- Majdandžić, Niko (69793)
- Mazurek, Miroslav (187204)
Odering party: TANG Nova Gradiška
Institution depot: Strojarski fakultet Slavonski Brod
HW platform: LAN mreža PC računala
Operating system: MS - DOS
Programming language: CLIPPER
Year: 1992
Summary: The essence of quality assurance function is to give
support torequirements realization: to get the required quality of
productsor services with minimum expences. At products fabrication it isnot
enough to take into consideration the officiency offabrication, but is
necessery to pay attention to another task ofproduction - " to assure the
high-quality service to the buyer".The task of this system module is,
through quality following andmanagement, to help the coordination and to
influence positivelyboth production tasks. This can be achieved by
realization of:
- making the data base on quality control results,
- elaboration of control procedures and plans,
- analysis of quality control results,
- following of the product reliability.
Module gives to the staff who follow the production qualitystate, insight
into the following information:
- plan of quality control operations,
- report on filed deviations from quality (reject, finishings(,
- analysis of deviations causes *technical or technologicaldocumentation,
machine, worker, tool, material, workinterruption),
- analysis of emerged deviations considering the products andexpenses of
correcting these deviations.
- Type of paper
: Computer program
Title: Information system for production management (ASIP)
- Authors:
- Majdandžić, Niko (69793)
- Čuljak, Slavko (194770)
- Damjanović-Živić, Dobrila (130785)
- Gajzler, Zdenko (144125)
- Kristek, Željko (130763)
Odering party: AIS Montaža Slavonski Brod
Institution depot: Strojarski fakultet Slavonski Brod
HW platform: LAN mreza PC računala
Operating system: MS-DOS
Programming language: CLIPPER, PARADOX
Year: 1993
Summary: The concept of the information system for production
management(ASIP) that was developed for the application in the
machineryindustry production systems is showe in the article.
Automationsystem for production and assembling management in
separtelydescribed (ASIP) as well as experiences in the ten years of
itsapplication. ASUP is also used as an independent system forproject
management in engineering and design firms. It is usedfor repair planning
and monitoring as a part of the maintenancecontrol computerized data
processing system - ASUR implemented inBalakovskaja nuclear power plant in
Russia.
Keywords: Management information system, planning introduction
- Type of paper
: Computer program
Title:
- Authors:
- Majdandžić, Niko (69793)
Odering party: Građevinski fakultet Osijek
Institution depot: Građevinski fakultet Osijek
HW platform: PC
Operating system: MS-DOS
Programming language: C
Year: 1993
- Type of paper
: Computer program
Title:
- Authors:
- Majdandžić, Niko (69793)
Odering party: Pravni fakultet Osijek
Institution depot: Pravni fakultet Osijek
HW platform: PC
Operating system: MS-DOS
Programming language: PARADOX
Year: 1994
- Type of paper
: Computer program
Title:
- Authors:
- Majdandžić, Niko (69793)
Odering party: PPK Kutjevo
Institution depot: PPK Kutjevo
HW platform: PC
Operating system: UNIKS-SCO
Programming language: PARADOX
Year: 1994
- Type of paper
: Computer program
Title:
- Authors:
- Majdandžić, Niko (69793)
Odering party: MGK Rijeka
Institution depot: MGK Rijeka
HW platform: PC
Operating system: MS DOS
Programming language: PARADOKOX
Year: 1995
- Type of paper
: Computer program
Title:
- Authors:
- Majdandžić, Niko (69793)
Odering party: MGK Rijeka
Institution depot: MGK Rijeka
HW platform: PC
Operating system: MS-DOS
Programming language: PARADOX
Year: 1995
- Type of paper
: Computer program
Title:
- Authors:
- Majdandžić, Niko (69793)
Odering party: MGK Rijeka
Institution depot: MGK Rijeka
HW platform: PC
Operating system: MS-DOS
Programming language: PARADOX
Year: 1995
- Type of paper
: Computer program
Title:
- Authors:
- Majdandžić, Niko (69793)
Odering party: MGK Rijeka
Institution depot: MGK Rijeka
HW platform: PC
Operating system: MS-DOS
Programming language: PARADOX
Year: 1995
- Type of paper
: Computer program
Title:
- Authors:
- Majdandžić, Niko (69793)
Odering party: MGK Rijeka
Institution depot: MGK Rijeka
HW platform: PC
Operating system: MS-DOS
Programming language: PARADOKX
Year: 1995
- Type of paper
: Computer program
Title:
- Authors:
- Majdandžić, Niko (69793)
Odering party: MGK Rijeka
Institution depot: MGK Rijeka
HW platform: PC
Operating system: MS-DOS
Programming language: PARADOX
Year: 1995
- Type of paper
: Computer program
Title:
- Authors:
- Majdandžić, Niko (69793)
Odering party: MGK Rijeka
Institution depot: MGK Rijeka
HW platform: PC
Operating system: MS-DOS
Programming language: PARADOX
Year: 1995
Other: Dobio priznanje za novitet na Info '93 u Zagrebu,nagradu za
najbolji cjeloviti softver za proizvodna poduzeća u Hrvatskoj u 1993.godini
po izboru časopisa Infotrend a u organizaciji Gospodarske Komore
Hrvatske.Učestvovao na svjetskoj izložbi softvera CEBIT'93 u Hanoveru.
- Type of paper
: Project
Title:
- Authors:
- Majdandžić, Niko (69793)
- Damjanović-Živić, Dobrila (130785)
- Filep, Radovan (144114)
- Čuljak, Slavko (194770)
- Čičak, Mirjana (127826)
Ordering party: Poljoprivredno prehrambeni kombinat Kutjevo, Mesna industrija - PAPUK
Institution depot: Poljoprivredno prehrambeni kombinat Kutjevo, Mesna industrija - PAPUK
Year: 1993
Number of pages: 183
Language: hrvatski
- Type of paper
: Project
Title:
- Authors:
- Majdandžić, Niko (69793)
- Damjanović-Živić, Dobrila (130785)
- Filep, Radovan (144114)
- Čuljak, Slavko (194770)
- Čičak, Mirjana (127826)
Ordering party: Poduzeće Plamen-International
Institution depot: Poduzeće Plamen-International
Year: 1992
Number of pages: 600
Language: hrvatski
- Type of paper
: Project
Title:
- Authors:
- Majdandžić, Niko (69793)
- Kekez, Franjo (90682)
- Nikolaš, Ante (140551)
- Filep, Radovan (144114)
- Damjanović-Živić, Dobrila (130785)
- Mazurek, Miroslav (187204)
- Onukijević, Josip (144386)
- Čuljak, Slavko (194770)
- Čičak, Mirjana (127826)
Ordering party: AIS TC Našice
Institution depot: AIS TC Našice
Year: 1992
Number of pages: 400
Language: hrvatski
- Type of paper
: Project
Title:
- Authors:
- Majdandžić, Niko (69793)
- Kekez, Franjo (90682)
- Damjanović-Živić, Dobrila (130785)
Ordering party: AIS Montaža Slavonski Brod
Institution depot: AIS Montaža Slavonski Brod
Year: 1992
Number of pages: 725
Language: hrvatski
- Type of paper
: Project
Title:
- Authors:
- Majdandžić, Niko (69793)
- Damjanović-Živić, Dobrila (130785)
- Filep, Radovan (144114)
- Kristek, Željko (130763)
Ordering party: Nuklearna elektrana Balakovskaja u Balakovu
Institution depot: Nuklearna elektrana Balakovskaja u Balakovu
Year: 1992
Number of pages: 800
Language: ruski
Other: Softver urađen prema projektu, dobio nagradu za novitet na
međunarodnoj izložbi Interbiro - Informatika 1992. godine u
Zagrebu.
- Type of paper
: Project
Title:
- Authors:
- Majdandžić, Niko (69793)
Ordering party: MGK Rijeka
Institution depot: MGK Rijeka
Year: 1993
Number of pages: 280
Language: hrvatski
- Type of paper
: Project
Title:
- Authors:
- Majdandžić, Niko (69793)
Ordering party: PPK Kutjevo
Institution depot: Poduzeće Papuk u Požegi
Year: 1994
Number of pages: 250
Language: hrvatski
- Type of paper
: Project
Title:
- Authors:
- Majdandžić, Niko (69793)
Ordering party: Poduzeće Požežanka u Požegi
Institution depot: Poduzeće Požežanka u Požegi
Year: 1994
Number of pages: 300
Language: hrvatski
- Type of paper
: Project
Title:
- Authors:
- Majdandžić, Niko (69793)
Ordering party: TPS Požega
Institution depot: TPS Požega
Year: 1994
Number of pages: 280
Language: hrvatski
- Type of paper
: Project
Title:
- Authors:
- Majdandžić, Niko (69793)
Ordering party: Poduzeće Dorada Kutjevo
Institution depot: Poduzeće Dorada Kutjevo
Year: 1995
Number of pages: 200
Language: hrvatski
- Type of paper
: Invited lecture
Title: CIM- Konzept als intergraler Bestandteil der
Produktionsstrategie
Year: 1994
- Type of paper
: Invited lecture
Title:
Year: 1993
- Type of paper
: Invited lecture
Title: Auslegung und Steuerung von flexiblen Montagesystemen
Year: 1993
- Type of paper
: Invited lecture
Title: Optimisation of use and Management of Production Resources
in complex FMS
Year: 1993
- Type of paper
: Invited lecture
Title: Intelligent Manufacturing Systems
Year: 1994
- Type of paper
: Invited lecture
Title: Megatrends in der Automatisierung der Produktion
Year: 1994
- Type of paper
: Invited lecture
Title:
Institution: Hrvatska akademija znanosti i umjetnosti
Year: 1993
- Type of paper
: Invited lecture
Title:
Institution: Sveučilišni računski centar
Year: 1994
- Type of paper
: Invited lecture
Title:
Year: 1994
- Type of paper
: Other
Title:
- Authors:
- Majdandžić, Niko (69793)
Type of work: Izlaganje na seminaru "Računalom integrirana proizvodnja",Mostar,11.07.1995.
Language: hrvatski
- Type of paper
: Other
Title:
- Authors:
- Majdandžić, Niko (69793)
Type of work: Izlaganje na seminaru "Računalom integrirana proizvodnja", Mostar,11.07.1995.
Language: hrvatski
- Type of paper
: Other
Title:
- Authors:
- Mazurek, Miroslav (187204)
Type of work: Izlaganje na seminaru "Računalom integrirana proizvodnja, Mostar,11.07.1995.
Language: hrvatski
- Type of paper
: Other
Title:
- Authors:
- Majdandžić, Niko (69793)
Type of work: Izlaganje na seminaru "Računalom integrirana proizvodnja",Mostar,11.07.1995.
Language: hrvatski
- Type of paper
: Other
Title:
- Authors:
- Majdandžić, Niko (69793)
Type of work: Izlaganje na seminaru "Računalom integrirana proizvodnja",Mostar,11.07.1995.
Language: hrvatski
- Type of paper
: Other
Title:
- Authors:
- Majdandžić, Niko (69793)
Type of work: Izlaganje na seminaru "Računalom integrirana proizvodnja",Mostar,11.07.1995
Language: hrvatski