- Type of paper
: Book
Title: Incentive payment systems in enterprises
- Authors:
- Buble, Marin (95961)
- Goić, Srećko (111242)
- Pavić, Ivan (77961)
- Editors
- Buble, Marin (95961)
Publisher: Ekonomski fakultet
ISBN: 86-80131-05-9
Year: 1991
Number of pages: 180
Number of references: 69
Language: hrvatski
Summary: In the market economy conditions in which human labour is
treatedas a commodity, the problem of wages is constantly in the focusof
the interest theoretically as well as practycally. Thatinteres was
particulary increased after F.W. Taylor hadestablished his conception of
"scientific management" involvinghis famous differential piece rate.
Although up to now the interest for particular payment systemshas varied,
it has certainly not faded out. It has however beenmodified so that the use
of the piece rate systems is beingreduced in favour of the time rate
systems corrected withperformance rating and bonuses.
Having in mind the development level of Croatia today, it isobvious that
incentive payment systems can play a significantrole, therfore the need for
their promotion is undersstandable.If they have been promoted up to now, it
was in an entirelydifferent economic system wich denied the market, in
which itsbasic price would result from the supply-demand relationship.
Now, when Croatia is turning to the market economy world and whenits
economic system is being built on that basis, the paymentsystems adapted to
that economy have come to full scope.
Keywords: Incentive payment, enterprise
- Type of paper
: Book
Title: Assembly line balancing by means of computer
- Authors:
- Rabe, Markus
- Wang, Yufei
- Veža, Ivica (95643)
- Editors
- Spur, Guenter
Publisher: KFA Forschungszentrum Juelich GmbH
ISBN: 3-89336-087-5
Year: 1992
Number of pages: 66
Number of references: 40
Language: njemački
Summary: Methods and software tools for overall assembly system
planning(from product analysis to assembly system analysis) have
beendeveloped at the IWF/IPK Institute in Berlin. Operation
sequenceplanning is dealt with in this paper. Assembly line
balancingprocedures are analysed. Original procedure is described,
takinginto account technological restrictions.
Keywords: Assembly line balancing, computer aided procedure
- Type of paper
: Book
Title: Plant Layout
- Authors:
- Veža, Ivica (95643)
- Editors
- Veža, Ivica (95643)
Publisher: Fakultet eletrotehnike, strojarstva i brodogradnje
ISBN: 953-6114-04-6
Year: 1994
Number of pages: 196
Number of references: 196
Language: hrvatski
Keywords: production system, design
- Type of paper
: Paper in journal
Title: Improvement of information systems of computer controlled
and managed transport
- Authors:
- Kuzmanić, Ivica (153406)
Journal: Naše more
Number: 2
ISSN: 0469-6255
Volume: 39
Year: 1992
Pages: from 73 to 76
Number of references: 7
Language: hrvatski
Summary: This paper deals with the applications of computer use in
portcontainer terminals in the last 20 or more years, its advantagesand
problems recured at the start. Research was aimed at buildinginformation
system of computer controlled and managed containertransport. Reviewing
some world and our port container terminalsthe author has concluded that
those information systems have beenbased on passive algorithms. A new
approach in adoptinginformation systems of computer controlled and managed
containertransport in port container terminals was applied. It has
beenproved that such a dynamic process i.e. container transport,should be
followed by similar active, dynamic algorithm. The baseof that dynamic
algorithm has been presented in this paper.
Keywords: Information systems, transport, container terminal, algorithm
- Type of paper
: Paper in journal
Title: Application Analysis of Simultaneous Engineering
- Authors:
- Veža, Ivica (95643)
- Rovan, Mario (95654)
- Bajić, Dražen (186194)
Journal: Tehnički vjesnik
Number: 1,2
ISSN: 1330-3651
Volume: 2
Year: 1995
Pages: from 13 to 24
Number of references: 6
Language: engleski
Summary: The paper analyses market changes and the influence of
these changes on increasing demands for reducing the cycles of development
and production. The paper presents program based on the simultaneous
engeneering concept (SE) and performed in the Laboratory for production
systems at the University of Split, Faculty of Electrical Engineering,
Mechanical Engineering and Naval Architecture. Fundamentals of SE,
presentation of modules used in its implementation, as well as results of
application of the SE concept on the real production system are described.
Keywords: Production System, Simultaneous Engineering, CAD/CAM System
- Type of paper
: Paper in journal
Title: Transfer technology center, Split
- Authors:
- Veža, Ivica (95643)
- Rovan, Mario (95654)
- Majer, Ivan
Journal: Hrvatsko gospodarstvo
Number: 1
ISSN: 1330-5816
Volume: 67
Year: 1995
Pages: from 73 to 77
Language: hrvatski
- Type of paper
: Paper in proceedings
Title: Simultaneous engineering in the production system
- Authors:
- Bago, Ivan (146921)
- Čorkalo, Ante (39191)
- Jerčić, Ivo (71161)
- Rovan, Mario (95654)
- Pavić, Ivan (77961)
- Bilić, Boženko (154905)
- Majce, Vojko (106935)
- Peruzović, Milivoj (172365)
- Bajić, Dražen (186194)
- Editors
- Srb, Neven
Proceedings title: Zbornik radova 3. međunarodnog simpozija o novim tehnologijama
Language: hrvatski
Place: Zagreb
Year: 1991
Pages: from 1 to 1
Meeting: III simpozij o novim tehnologijama
Held: from 10/15/91 to 10/17/91
Summary: This paper present research program for small production
systemsbased on the simultaneous engineering concept.
Keywords: Simultaneous engineering, production system
- Type of paper
: Paper in proceedings
Title: Shortening the production cycle by using set-production
cencept
- Authors:
- Rovan, Mario (95654)
- Editors
- Šibalija, Ljubomir
Proceedings title: Zbornik radova naučno-stručnog skupa Organizacija proizvodno poslovnog sustava
Language: hrvatski
Place: Sarajevo, BIH
Year: 1991
Pages: from 312 to 317
Meeting: Naučno-stručni skup Organizacija proizvodno poslovnih sistema
Held: from 06/27/91 to 06/28/91
Summary: The existence of production systems in the stiff
competition oftoday's market is possible mostly because of
decreasedmanufacturing expences. That is to be done by shortening
theproduction cycle, and the stock inventory cycle as well. Afterchanging
from the large scale to the small scale type ofmanufacturing unter the
set-production concept, the productioncycle and the stock inventory cycle
will be shortened.
Keywords: Production cycle, small scale production, large scale production, set-production
- Type of paper
: Paper in proceedings
Title: Dimensioning the warehouse using simulation
- Authors:
- Veža, Ivica (95643)
- Editors
- Tavangarian, Djamshid
Proceedings title: 7. Symposium ASIM'91, Band 4
Language: njemački
Place: Hagen, Njemačka
Year: 1991
ISBN/ISSN: 3-528-06449-4
Pages: from 193 to 197
Meeting: 7. Symposium ASIM'91, Band 4. Fortschritte in der Simulationstechnik
Held: from 09/23/91 to 09/26/91
Summary: The paper deals with dimensioning of the warehouse within
aflexible manufacturing system using simulation. The model isdeveloped
using simulation language GPSS/PC.
Keywords: Simulation, warehouse, flexible manufacturing system
- Type of paper
: Paper in proceedings
Title: De Novo Programming in MCDM
- Authors:
- Babić, Zoran (1262)
- Pavić, Ivan (77961)
- Editors
- Fandel, G.
Proceedings title: 16. Symposium on Operation Research
Language: engleski
Place: Trier, Njemačka
Year: 1991
Pages: from 579 to 582
Meeting: 16. Symposium on Operation Research
Held: from 09/09/91 to 09/11/91
Summary: The paper shows the application of De Novo in the real
productionsystem which produces various products.
Keywords: De Novo programming, production system
- Type of paper
: Paper in proceedings
Title: Designing on optimal production system
- Authors:
- Babić, Zoran (1262)
- Pavić, Ivan (77961)
- Editors
- Martić, Ljubomir
- Neralić, Luka
Proceedings title: Zbornik radova Konferencije operacijskih istraživanja
Language: hrvatski
Place: Zagreb
Year: 1991
Pages: from 187 to 198
Meeting: Konferencija operacijskih istraživanja KOI'91
Held: from 12/21/91 to 12/22/91
Keywords: Designing, optimal system, De Novo approach
- Type of paper
: Paper in proceedings
Title: Procedure for determination of optimal number of
transportation means
- Authors:
- Bilić, Boženko (154905)
- Veža, Ivica (95643)
- Editors
- Cebalo, Roko
Proceedings title: Zbornik radova Suvremeni trendovi proizvodnog strojarstva
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 203 to 208
Meeting: Suvremeni trendovi proizvodnog strojarstva
Held: from 05/08/92 to 05/08/92
Summary: Automated transport systems represent a very important
componentof modern production system (e.g. FMS). Unfortunately,
therealization of FMS is connected with high investments. It istherefore,
very important to choose the proper component of thesystem at the very
first stage of transport system design. Thispaper represents the procedure
for determination of the optimalnumber of inductively controlled
transportation means. Anapplication example is also given.
Keywords: Optimization, transport mean
- Type of paper
: Paper in proceedings
Title: The basic performance of maritime new global communication
system
- Authors:
- Kuzmanić, Ivica (153406)
- Lazarević, Životije (153410)
- Editors
- Vidmar, Branko
Proceedings title: Zbornik radova 34. savjetovanja ELMAR
Language: hrvatski
Place: Zadar
Year: 1992
ISBN/ISSN: 86-80139-01-7
Pages: from 52 to 57
Meeting: 34. savjetovanje ELMAR
Held: from 09/28/92 to 09/30/92
Keywords: Global communication system, maritime, safety
- Type of paper
: Paper in proceedings
Title: Simultaneous Engineering in the small production systems
- Authors:
- Rovan, Mario (95654)
- Bajić, Dražen (186194)
- Veža, Ivica (95643)
- Editors
- Perić, Nedjeljko
Proceedings title: Zbornik radova 37. međunarodni godišnji skup KoREMA
Language: hrvatski
Place: Zagreb
Year: 1992
ISBN/ISSN: 86-81571-11-7
Pages: from 601 to 604
Meeting: 37. međunarodni godišnji skup KoREMA
Held: from 04/26/92 to 04/29/92
Summary: This paper present research program for small production
systemsbased on the Simultaneous Engineering concept in the Laboratoryfor
production systems on the Faculty for electrotechnicalengineering,
mechanical engineering and naval architecture on theUniversity of Split. In
this paper are introduced some basicelements of Simultaneous Engineering
the presentation of themodule for its realization and the results of
application of theSimultaneous Engineering on the real model.
Keywords: Simultaneous Engineering, production system
- Type of paper
: Paper in proceedings
Title: Integration of CAD/NC within manufacturing cell
- Authors:
- Rovan, Mario (95654)
- Veža, Ivica (95643)
- Bajić, Dražen (186194)
- Editors
- Šurina, Tugomir
Proceedings title: Zbornik radova 11. međunarodnog savjetovanja BIAM'92
Language: hrvatski
Place: Zagreb
Year: 1992
ISBN/ISSN: 86-81571-12-5
Pages: from 19 to 25
Meeting: 11. međunarodno savjetovanje BIAM'92
Held: from 06/16/92 to 06/17/92
Summary: In order to shorten the delivery time many companies are
theleaving the concept of seriales engineering and are starting touse the
concept of simultaneous engineering with decentralizationcontrol and
planning system. In manufacturing procesdecentralization is implemented by
employing manufacturing cellin which conventional and numerical control
machine tools areincluded. The goal in designing these manufacturing cells
is theintegration of CAD with CAM system. The paper presents
theimplementation of direct integration CAD system with thenumerical
control of machine tools within the manufacturing cell.
Keywords: Computer Aided Design (CAD), numerical control (NC), manufacturing cell
- Type of paper
: Paper in proceedings
Title: Multicriterial Production Programming by De Novo Approach
- Authors:
- Babić, Zoran (1262)
- Pavić, Ivan (77961)
- Editors
- Grubbstroem, R.W.
Proceedings title: Proceedings 7th International Working Seminar on Production Economics
Language: engleski
Place: Innsbruck, Austria
Year: 1992
Pages: from 17 to 33
Meeting: 7th International Working Seminar on Production Economics
Held: from 02/17/92 to 02/21/92
Summary: This work shows the procedure of production programme
selectionby De Novo approach on a practical example. In order to get
aprecise idea of this approach i.e. of its advantages anddisadvantages, the
work presents various production situationrequiring different approaches to
the problem.
Keywords: Multicriterial production programming, De Novo approach
- Type of paper
: Paper in proceedings
Title: Machine tools dynamic measuring
- Authors:
- Bago, Ivan (146921)
- Editors
- Perić, Nedjeljko
Proceedings title: Zbornik radova 38. međunarodnog skupa KoREMA
Language: hrvatski
Place: Zagreb
Year: 1993
ISBN/ISSN: 953-6037-00-9
Pages: from 417 to 421
Meeting: 38. međunarodni skup KoREMA
Held: from 04/26/93 to 04/28/93
Summary: This study eleborates the way of obtaining dynamic
characteristicfrom the taken stiffness or compliance values of a machine
tool.
The analysis of stability was measured and performed on a lathe,which is a
representative of a machine tool in engeneeringindustry. In measuring, an
experimental workpiece recommended byM.T.I.R.A.-UMIST was used.
The original stability charts in which the stable and unstableareas
depending on the deepness of cutting and turning speed canbe clearly seen,
were drawn on the basis of the taken data andthe analysis which had been
accomplished. According to thestability chart, the measuring of the
consumed energy was doneand the original spatial diagram of energy use in
the boundaryareas obtained in the experiment.
Keywords: Measuring, dynamic characteristics, machine tool
- Type of paper
: Paper in proceedings
Title: Transport analysis within manufacturing structures based
on the group technology principle
- Authors:
- Bilić, Boženko (154905)
- Veža, Ivica (95643)
- Editors
- Perić, Nedjeljko
Proceedings title: Zbornik radova 38. međunarodnog skupa KoREMA
Language: hrvatski
Place: Zagreb
Year: 1993
ISBN/ISSN: 953-6037-00-9
Pages: from 707 to 710
Meeting: 38. međunarodni skup KoREMA
Held: from 04/26/93 to 04/28/93
Summary: One way of doing efficient in firm is to introduction
newmanufacturing structures. Conventional structures of the processlayout
and line layout, do not meet the demands set by the modernproduction.
Therefore, new structures based on the grouptechnology principle are being
introduced. The paper analysestransport system characteristics and the
problems duringdesigning and realization of manufacturing system.
Keywords: Transport system, manufacturing structure, group technology
- Type of paper
: Paper in proceedings
Title: Production planning and control within a manufacturing
cell
- Authors:
- Grisogono, Kolja
- Veža, Ivica (95643)
- Editors
- Jezernik, Anton
Proceedings title: Proceedings International conference Design to manufacture in modern industry
Language: engleski
Place: Bled, Slovenija
Year: 1993
ISBN/ISSN: 86-345-0100-0
Pages: from 237 to 243
Meeting: International Conference Design to manufacture in modern industry DMMI'93
Held: from 06/07/93 to 06/09/93
Summary: According to the authors research, production structure
ofmanufacturing cell meets the demands of the modern productionsystem. An
important stage in the formation of manufacturing cellconsists in defining
the scope of activities as well as forms anddegree of integration within a
particular cell. A manufacturingcell includes a decentralized concept of
production planning andcontrol. The paper analyzed the basic activities of
productionplanning and control of central as well as activities of
amanufacturing cell.
MRP II concept of integrated production planning and control isaccepted in
the process.
Keywords: Production planning and control, manufacturing cell, MRP II concept
- Type of paper
: Paper in proceedings
Title: Applcation of CAD/CAM system in die/mould making
- Authors:
- Rovan, Mario (95654)
- Veža, Ivica (95643)
- Editors
- Cebalo, Roko
Proceedings title: Zbornik radova 2. savjetovanja proizvodnog strojarstva
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from 97 to 106
Meeting: 2. savjetovanje proizvodnog strojarstva CIM'93
Held: from 11/18/93 to 11/18/93
Summary: The paper analyses the modern production characteristics
trandsin order to make a model of CAD/CAM system for making die/mouldsfor
polymers. The model is based on the concept of integration ofinformation
flow, Simultaneous Engineering concept and abottom-up concept for small
manufacturing systems. Model areinvestigateted in the die/mould design,
making and testing. Theresults are compared to the conventional form of
organization.
Keywords: Die/mould machining, CAD/CAM system, Simultaneous Engineeering
- Type of paper
: Paper in proceedings
Title: Making decision using analytical hierarchical process for
conceptual of product
- Authors:
- Jerčić, Ivo (71161)
- Bajić, Dražen (186194)
- Editors
- Cebalo, Roko
Proceedings title: Zbornik radova 2. savjetovanje proizvodnog strojarstva
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from 1 to 10
Meeting: 2. savjetovanje proizvodnog strojarstva CIM'93
Held: from 11/18/93 to 11/18/93
Summary: The paper describes the Analitical hierarchical (AHP)
processapplied to the engine construction. AHP is a methodical
procedureused to split any complex problem to its component
parts.Priorities of each level can be defined by estimating the valueof
each criterion, possibility or fact. To obtain maximumimpartiality, it is
necesary to compare only two parameters ofeach category. AHP does not
insist on explanation of thecontrasting procedure. The procedure offers a
successfulcorrelation of intuitive and deductive way of reflection, at
thesame time consolidating the intents into a unique synthesis.
Theconsistency degree of the procedure is checked at the end of theprocess.
Keywords: Evaluation of design variants, analytical hierarchical process, consistency
- Type of paper
: Paper in proceedings
Title: Implementation of a working center within a plant using
classical machines
- Authors:
- Rovan, Mario (95654)
- Bajić, Dražen (186194)
- Veža, Ivica (95643)
- Editors
- Srb, Neven
Proceedings title: Zbornik radova 4. međunarodni simpozij o novim tehnologijamaKnjiga II
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from 15 to 18
Meeting: 4. međunarodni simpozij o novim tehnologijama
Held: from 10/25/93 to 10/27/93
Summary: The paper analyzed the economical usage of a working center
forthe treatment of a fear box which is a component part of thedrill. It is
analyzed whether it is more economical tomanufacture the gear box using
existing machines or to make anproduction island for the production of
prizmatic products withthe working center as its base.
Keywords: Working center, classical machines, prizmatic parts
- Type of paper
: Paper in proceedings
Title: Analityc decision-making process in product design
- Authors:
- Jerčić, Ivo (71161)
- Bajić, Dražen (186194)
- Editors
- Kuljanić, Elso
Proceedings title: Advanced manufacturing systems and technology, Volume II
Language: engleski
Place: Udine, Italija
Year: 1993
Pages: from 151 to 158
Meeting: 3rd International conference on Advanced manufacturing systems and technology
Held: from 04/26/93 to 04/27/93
Summary: Life time of any product could be divided into several
stages:Design - Manufacturing - Exploitation - Destruction (or Recycling).
The last three stages have a strong influence on thedesign stage by means
of information feeedback which has afunction of criteria and parameter
regulator in the design stage.Out of a large number of possible solution
the designer has toselect the optimal one, starting from the very beginning
of thedesign process.
It is frequently hard to bring a correct decission due to lack
ofinformation and time. In order to bring an optimal decision andto take
into account criteria based on all stages of the productlife time, an
analytical method of a decision-making hierarchy isdeveloped.
Keywords: Evaluation of design variants, analytical hierarchical process, consistency
- Type of paper
: Paper in proceedings
Title: Processing centers diagnosing and maintenance by means of
fault-tree analysis method
- Authors:
- Čorkalo, Ante (39191)
- Boljat, Ivica (82376)
- Editors
- Kuljanić, Elso
Proceedings title: Advanced manufacturing systems and technology
Language: engleski
Place: Udine, Italija
Year: 1993
Pages: from 159 to 164
Meeting: 3rd International conference on Advanced manufacturing systems and technology
Held: from 04/26/93 to 04/27/93
Summary: In the course of processing systems diagnosing and
maintenance itis very important to define udesired events-faults that may
causethe loss of systems function what may consequently lead to
thesignificant financial losses. The carried out diagnosing enablesthe
indentification and ranking of components or frameworks totheir
contribution to the safety of the system itself. Togetherwith a short
review of the possible application of the fault-treeanalysis method, this
paper gives the fault-tree, based on theprocessing center model.
Keywords: Processing centers, diagnosing, fault-tree
- Type of paper
: Paper in proceedings
Title: Modern manufacturing and communication in production
system
- Authors:
- Veža, Ivica (95643)
- Rovan, Mario (95654)
- Editors
- Rožić, Nikola
- Begušić, Dinko
Proceedings title: Conference on software in telecommunications and computer networks
Place: Split
Year: 1994
ISBN/ISSN: 953-6114-05-4
Pages: from 109 to 117
Meeting: SoftCOM'94
Held: from 06/16/94 to 06/17/94
Summary: The paper describes the market changes and their impact on
increased demands for shortening the product development time, increasing
the product quality and decreasing production costs. To achieve these aims
new production system methods and strategies have been developed.
Application of new strategies would not be possible without the application
of computer and network systems. The paper shows the basic informations
flow in computer integrated manufacturing as well as survey of the present
state and forecast regarding the particular components of the production
system. Finally, basic characteristics of a developed
communication-oriented small production system are described.
Keywords: modern manufacturing, communication, production system
- Type of paper
: Paper in proceedings
Title: Production island designing and contolling by simulation
- Authors:
- Veža, Ivica (95643)
- Rovan, Mario (95654)
- Bilić, Boženko (154905)
- Editors
- Šurina, Tugomir
Proceedings title: Zbornik radova 12. međunarodno savjetovanje BIAM'94
Language: hrvatski
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-6037-03-3
Pages: from B-25 to B-28
Meeting: 12. međunarodno savjetovanje BIAM'94
Held: from 06/23/94 to 06/24/94
Summary: The paper investigates the possibility of production
organization based on group technology and decreased number of organization
levels. Application of simulation in design and control of production
islands is discused. On the basis of research results obtained from a real
system, the model of simulation based design and contol of production
island is shown.
Keywords: Designing, controlling, production island, simulation
- Type of paper
: Paper in proceedings
Title: Chatter on machine tools
- Authors:
- Bago, Ivan (146921)
- Editors
- Šurina, Tugomir
Proceedings title: Zbornik radova 12. međunarodnog savjetovanja BIAM'94
Language: hrvatski
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-6037-03-3
Pages: from C-1 to C-4
Meeting: 12. međunarodno savjetovanje BIAM'94
Held: from 06/23/94 to 06/24/94
Summary: The study elaborates the basic principles of solving
machine tools dynamics stability. The experiment has been carried put on a
lathe and on the basic of the results that have been obtained the stability
chart and a diagram of energy use have been made. The study shows the way
of determning machine tools stable and unstable areas.
Keywords: Machine tools, dynamics stability
- Type of paper
: Paper in proceedings
Title: Production concepts and modular construction of machine
tools
- Authors:
- Rovan, Mario (95654)
- Veža, Ivica (95643)
- Bajić, Dražen (186194)
- Editors
- Šurina, Tugomir
Proceedings title: Zbornik radova 12. međunarodnog savjetovanja BIAM'95
Language: hrvatski
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-6037-03-3
Pages: from C-45 to C-48
Meeting: 12. međunarodno savjetovanje BIAM'94
Held: from 06/23/94 to 06/24/94
Summary: Modern production concepts, the modular construction of
machine tools are closely correlated. The possibility of meeting the
requirements of this correlation are investigated on real model, studying
the module application and design.
Keywords: Production concepts, modular construction, machine tools
- Type of paper
: Paper in proceedings
Title: Analytic hierarchichal process in product design
- Authors:
- Bajić, Dražen (186194)
- Veža, Ivica (95643)
- Jerčić, Ivo (71161)
- Editors
- Jezernik, Anton
Proceedings title: Proceedings 2nd internatinal conference DMMI'95
Language: engleski
Place: Bled, Slovenija
Year: 1995
ISBN/ISSN: 86-435-0108-5
Pages: from 698 to 707
Meeting: 2nd International conference DESIGN TO MANUFACTURE IN MODERN INDUSTRY
Held: from 05/29/95 to 05/29/95
Summary: The paper describes the analytical hierarchichal process
AHP applied to the engine construction. AHP is a methodical procedure used
to split any complex problem to its component parts. Priorities of each
level can be defined by estimating the value of each criterion, possibility
or fact.
Keywords: Analytic hijerarchical process, product designy
- Type of paper
: Paper in proceedings
Title: Transfer limitations of new technologies
- Authors:
- Rovan, Mario (95654)
- Veža, Ivica (95643)
- Bajić, Dražen (186194)
- Editors
- Srb, Neven
Proceedings title: Proceedings of the 5th SONT
Language: engleski
Place: Zagreb
Year: 1995
ISBN/ISSN: 953-6228-00-9
Pages: from 89 to 92
Meeting: 5th SONT
Held: from 09/25/95 to 09/27/95
Summary: In the Production System Laboratory at the Facultaty of
Electrical Engineering, Mechanical Engineering and Naval Architecture
modern production and organizational concept are investigated with the aim
of survival and development of the production systems. The basic problems
of quick and efficient transfer of research results to the Croatian
production systems are described.
Keywords: Production sistem, new technologies, transfer
- Type of paper
: Paper in proceedings
Title: Integration of simulation in manufacturing system design
- Authors:
- Veža, Ivica (95643)
- Bajić, Dražen (186194)
- Editors
- Guasch, Antoni
Proceedings title: Proceedings of the Conference on Modelling and Simulation
Language: engleski
Place: Barcelona, Španjolska
Year: 1994
ISBN/ISSN: 1-56555-028-5
Pages: from 833 to 837
Meeting: Modelling and Simulation ESM'94
Held: from 06/01/94 to 06/03/94
Summary: The paper describes a manufacturing design model containing
the GRAFSIM simulation system. The characteristic feature of the system
developed is its application in flexible manufacturing structures. The
analysis of a production program is applied in the segmentation of a
production system, optimizaction of a plant layout and utilization tools.
Keywords: Integration, simulation, manufacturing system design
- Type of paper
: Paper in proceedings
Title: Modern organization concepts
- Authors:
- Veža, Ivica (95643)
- Rovan, Mario (95654)
- Editors
- Veža, Ivica (95643)
- Rovan, Mario (95654)
Proceedings title: Zbornik radova 2. međunarodnih seminar PS'95
Language: hrvatski
Place: Split
Year: 1995
ISBN/ISSN: 953-6114-07-0
Pages: from 13 to 24
Meeting: 2. međunarodni seminar Proizvodni sustavi PS'95
Held: from 09/21/95 to 09/22/95
Keywords: Organization concepts, turbulent environment
- Type of paper
: Paper in proceedings
Title: An approach to defining machine cell using Cluster
algorithm
- Authors:
- Veža, Ivica (95643)
- Editors
- Dar-El, Ezey
Proceedings title: Proceedings of the 13th International Conference on Production Research
Language: engleski
Place: Jerusalem, Israel
Year: 1995
ISBN/ISSN: 965-294-118-2
Pages: from 497 to 499
Meeting: The 13th International Conference on Production Research
Held: from 08/06/95 to 08/10/95
Summary: The introduction of new organizational concepts had led to
parallel introduction of new production structures. Several methods have
been developed for the design of these production structures, but the most
frequenty one is the Cluster algorithm. The paper describes the developed
algorithm, which is a modifed sorting algorithm.
Keywords: Machine cell, Cluster algorithm, modifed sorting algorithm
- Type of paper
: Paper in proceedings
Title: Global maritime distress and safety system and one-man
bridge operation
- Authors:
- Lazarević, Životije (153410)
- Kuzmanić, Ivica (153406)
- Editors
- Vidmar, Branko
Proceedings title: Proceedings Electronics in Marine
Language: engleski
Place: Pula
Year: 1995
Pages: from 225 to 228
Meeting: 37th ELMAR International Symposium
Held: from 04/21/95 to 04/22/95
Summary: The paper presents the author's approach how to distribute
optimally the GMDSS system and the integrated navigation system equipment
on the bridge in the context of one-man bridge operation concept.
Keywords: GMDSS system, navigation system, integration
- Type of paper
: Paper in proceedings
Title: A contribution to resolving problems of installing shipp's
cables onboard contemporarty ships
- Authors:
- Kuzmanić, Ivica (153406)
- Krčum, Maja
- Editors
- Vidmar, Branko
Proceedings title: Proceedings Electronics in Marine
Language: engleski
Place: Pula
Year: 1995
Pages: from 67 to 70
Meeting: 37th ELMAR International Symposium
Held: from 04/21/95 to 04/22/95
Summary: The paper deals with specific features of ship's cables
designed to be employed onboard contemporary vessels, as well as with a
tendency to have fiber optic cables introduced onboard.
Keywords: Shipps' cables, installing, shipp
- Type of paper
: Paper in proceedings
Title: The rate of equipment utilization
- Authors:
- Buble, Marin (95961)
- Pavić, Ivan (77961)
- Editors
- Dar-El, Ezey
Proceedings title: Proceedings of The 13th International Conference on Production Research
Language: engleski
Place: Jerusalem, Israel
Year: 1995
ISBN/ISSN: 965-294-118-2
Pages: from 521 to 523
Meeting: The 13th International Conference on Production Research
Held: from 08/06/95 to 08/10/95
Summary: The possibility of measuring the bonity of production
organization by means equipment utilization indicators is elaborated in the
paper. To this end, three indicators have been defined - coefficient of
extensive equipment utilization, coefficient of intesive equipment
utilization and integral coefficient of equipment utilization.
Keywords: Production organization bonity, equipment, the rate of utilization
- Type of paper
: Paper in proceedings
Title: Konowledge and technology in the process of transition of
Croatian economy
- Authors:
- Pavić, Ivan (77961)
- Editors
- Buble, Marin (95961)
Proceedings title: Proceedings of 1st International Conference on Enterprise in Transition
Language: engleski
Place: Split
Year: 1995
ISBN/ISSN: 953-6024-05-5
Pages: from 181 to 185
Meeting: 1st International Conference on Enterprise in Transition
Held: from 10/04/95 to 10/06/95
Summary: The object of transition process should be all the segments
of the Croatian economy that determine its competitiveness. Knowledge and
technology have an outstanding role among them. It is very hard for
Croatia, as it is for other small countries, to make any significant
breakthrough in the world of new technologies. Therefore, the transition
process should define Croatia as small country seccessfully participating
in the creation and exploitation of common knowledge and technology.
Keywords: Knowledge, technology, process of transition, Croatian economy
- Type of paper
: Summary in proceedings
Title: The organization structure in "factory of future"
- Authors:
- Rovan, Mario (95654)
- Pavić, Ivan (77961)
- Editors
- Katalinić, Branko
- Osanna, Herbert
Proceedings title: Collection of summaries 2nd International DAAAM Symposium
Language: njemački
Place: Wien, Austrija
Year: 1991
Pages: from 159 to 160
Meeting: 2nd International DAAAM Symposium
Held: from 12/09/91 to 12/11/91
Keywords: Organization structure, factory of future
- Type of paper
: Summary in proceedings
Title: Information subsystem in maintenance system pupdoseful for
machninig centers
- Authors:
- Čorkalo, Ante (39191)
- Boljat, Ivica (82376)
- Editors
- Katalinić, Branko
- Osanna, Herbert
Proceedings title: Collection of summaries 2nd International DAAAM Symposium
Place: Wien, Austrija
Year: 1991
Pages: from 48 to 49
Meeting: 2nd International DAAAM Symposium
Held: from 12/09/91 to 12/11/91
Keywords: Information subsystem, maintenance system, machining center
- Type of paper
: Summary in proceedings
Title: The impact of the size of the production system on the
organization structure
- Authors:
- Pavić, Ivan (77961)
- Rovan, Mario (95654)
- Veža, Ivica (95643)
- Editors
- Katalinić, Branko
- Osanna, Herbert
Proceedings title: Collection of summaries 3rd International DAAAM Symposiun
Language: engleski
Place: Wien, Austrija
Year: 1992
Pages: from 135 to 136
Meeting: 3rd International DAAAM Symposium
Held: from 11/04/92 to 11/06/92
Keywords: Size, production system, organization structure
- Type of paper
: Summary in proceedings
Title: Problems in the application of SE koncept
- Authors:
- Rovan, Mario (95654)
- Bajić, Dražen (186194)
- Veža, Ivica (95643)
- Editors
- Katalinić, Branko
- Osanna, Herbert
Proceedings title: Colletion of summaries 3rd International DAAAM Symposium
Language: engleski
Place: Wien, Austrija
Year: 1992
Pages: from 157 to 158
Meeting: 3rd International DAAAM Symposium
Held: from 11/04/92 to 11/06/92
Keywords: Simultaneous Engineering, Computer Integrated Engineering
- Type of paper
: Summary in proceedings
Title: Decentralised production planning and control
- Authors:
- Rovan, Mario (95654)
- Veža, Ivica (95643)
- Editors
- Katalinić, Branko
- Osanna, Herbert
Proceedings title: Collection of summaries 4th International DAAAM symposium
Language: njemački
Place: Wien, Austrija
Year: 1993
Pages: from 369 to 370
Meeting: 4th International DAAAM Symposium
Held: from 09/16/93 to 09/18/93
Keywords: Decentralized production planning and control concept, production system
- Type of paper
: Summary in proceedings
Title: Design of an organization structure applying the
multicriterial analysis methods
- Authors:
- Pavić, Ivan (77961)
- Hržić, Dragana (56546)
- Veža, Ivica (95643)
- Editors
- Katalinić, Branko
- Osanna, Herbert
Proceedings title: Collection of summaries 4th International DAAAM Symposium
Language: engleski
Place: Wien, Austrija
Year: 1993
Pages: from 241 to 242
Meeting: 4th International DAAAM Symposium
Held: from 09/16/93 to 09/18/93
Keywords: Design, organization structure, multicriterial analysis
- Type of paper
: Summary in proceedings
Title: CAD/CAM in the production island
- Authors:
- Rovan, Mario (95654)
- Veža, Ivica (95643)
- Editors
- Katalinić, Branko
- Osanna, Herbert
Proceedings title: Colletion of summaries 4th International DAAAM symposium
Language: engleski
Place: Wien, Austrija
Year: 1993
Pages: from 289 to 290
Meeting: 4th International DAAAM Symposium
Held: from 09/16/93 to 09/18/93
Keywords: CAD/CAM, production island
- Type of paper
: Summary in proceedings
Title: Application of fault-tree analysis by the diagnosing and
maintenance processing centres
- Authors:
- Čorkalo, Ante (39191)
- Boljat, Ivica (82376)
- Editors
- Katalinić, Branko
- Osanna, Herbert
Proceedings title: Collection of summaries 4th International DAAAM symposium
Language: engleski
Place: Wien, Austrija
Year: 1993
Pages: from 63 to 64
Meeting: 4th International DAAAM Symposium
Held: from 09/16/93 to 09/18/93
Keywords: Fault-tree analysis, diagnosing, maintenance, processing center
- Type of paper
: Summary in proceedings
Title: Application of Promethee method in determining the
maintenance organizational structure
- Authors:
- Pavić, Ivan (77961)
- Veža, Ivica (95643)
- Editors
- Katalinić, Branko
- Osanna, Herbert
Proceedings title: Colletion of summaries 5th International DAAAM Symposium
Language: engleski
Place: Wien, Austrija
Year: 1994
Pages: from 325 to 326
Meeting: 5th International DAAAM Symposium
Held: from 10/27/94 to 10/29/94
Keywords: Promethe method, maintenance, organizational structure
- Type of paper
: Summary in proceedings
Title: Organization structure designing using the method of
multicriterial analysis
- Authors:
- Pavić, Ivan (77961)
- Buble, Marin (95961)
- Dulčić, Želimir
- Hržić, Dragana (56546)
- Editors
- Katalinić, Branko
- Osanna, Herbert
Proceedings title: Colletion of summaries 5th International DAAAM symposium
Language: engleski
Place: Wien, Austrija
Year: 1994
Pages: from 323 to 324
Meeting: 5th International DAAAM Symposium
Held: from 10/27/94 to 10/29/94
Keywords: Organization structure, design, multicriterial analysis
- Type of paper
: Ph.D.
Title: Some problems system payment by results in the continual
production
Faculty: Ekonomski fakultet Sveučilište u Zagrebu
Author: PAVIĆ IVAN
Date of defense: 06/24/92
Language: hrvatski
Number of pages: 302
Keywords: System payment, continual production
- Type of paper
: M.A.
Title: Information system of computer controlled and managed
container transport
Faculty: Elektrotehnički fakultet Zagreb
Author: KUZMANIĆ IVICA
Date of defense: 02/28/91
Language: hrvatski
Number of pages: 113
Summary: This thesis deals with the applications of computer use in
portcontainer terminals in the last 20 or more years, its advantagesand
problems recured at the start.
Some models of transport process managing at some prominent portcontainer
terminals have been shown.
Research was aimed at building information systems of computercontrolled
and managed container transport. Reviewing some worldand domestic port
container terminals the author has concludedthat those information systems
have been based on passivealgorithms.
A new approach and new philosophy in adopting information systemsof
computer controlled and managed container transport at portcontainer
terminals was applied. It is proved that such a dynamicprocess i.e.
container transport should be followed by similaractive, dinamic algorithm.
In this thesis has been presented the base of that dynamicalgorithm, and
its simplest application has been done on apersonal computer.
Keywords: Information system, port container terminal, multimodal transport
- Type of paper
: M.A.
Title: Simulation of the flexible manufacturing system for
production of the prismatic components
Faculty: Fakultet strojarstva i brodogradnje Zagreb
Author: BAJIĆ DRAŽEN
Date of defense: 09/19/95
Language: hrvatski
Number of pages: 123
Summary: This paper deals with a simulation model by means of which
designing of the flexible manufacturing system can be make. Before the
model was designed, different methods for designing production systems had
been compared, the basic impact factors on the system behavior had been
defined, flexible production structures and their elements had been
analyzed. Basics of the designing manufacturing systems using simulation
had been shown. The results of the simulation represents the incoming data
for the technological-economical analysis of several variants of the real
system, that bring to the successful economical solution. The given model
has been tested on the manufacturing system for production of a gear box of
a drilling macvhine in the factory "Dalstroj" - Split. Shortest through
time, minimum number of palettes and production modules, the cheapest
solution has been made, as well as a comparison with the present solution.
Thus, the justification for introduction of the flexible manufacturing
system has been proved.
Keywords: flexible manufacturing system, modeling, simulation, technological-economical analysis
- Type of paper
: M.A.
Title: Design of the material flow in the production system
Faculty: Fakultet strojarstva i brodogradnje Zagreb
Author: BILIĆ BOŽENKO
Date of defense: 04/14/94
Language: hrvatski
Number of pages: 97
Summary: This paper deals with a model by means of which a choice of
corresponding transport system of interrupting flow of transport can be
make. The model is used in the production structures based on principles of
group technology. Before the model was designed, the basic elements forming
the system of material flow, as well as the basic tasks in transport system
design had been defined. The transport devices of interrupt flow had been
analysed. After that the research was carried out, i.e. some existing
solutions have been presented and the advantages as well as the
disadvantages of the shown procedure have been shown. The given model has
been tested on an example of a production system.
For the calculations that ought to be done, the following computer
programmes have been made:
-"TROSKOVI"-a programme for calculating expenses of investment and usage of
the transport systems,
-"NTS"-a programme by means of which the necessary number of transport
devices is calculated by analytic method,
-"AHP"-a programme by means of which, based on the given criteria, a choice
of corresponding transport system is carried out according to "AHP" method,
-"ELECTRE"-a programme by means of which, based on the given criteria, the
choice of corresponding transport system is made, according to "ELECTRE"
method.
Simulation of the work of the production system, shown in the example, has
been carried out by means of the simulation programme "GRAFSIM" of the
SIEMENS-AG firm.
Keywords: material flow, transport system, automated giuded vehicles, simulation of production systems, multi-criteria analysis
- Type of paper
: Mentorship
Title:
Faculty: Fakultet elektrotehnike, strojarstva i brodogradnje Split
Mentor: VEŽA IVICA
Date of defense: 02/12/94
Number of pages: 65
Author: Petrović student Dejan
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Fakultet elektrotehnike, strojarstva i brodogradnje Split
Mentor: VEŽA IVICA
Date of defense: 04/05/93
Number of pages: 55
Author: Đelalija student Ivica
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Fakultet elektrotehnike, strojarstva i brodogradnje Split
Mentor: VEŽA IVICA
Date of defense: 05/05/91
Number of pages: 81
Author: Gizdić student Ivica
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Fakultet elektrotehnike, strojarstva i brodogradnje Split
Mentor: ROVAN MARIO
Date of defense: 04/05/93
Number of pages: 58
Author: Vladušić student Danko
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Fakultet elektrotehnike, strojarstva i brodogradnje Split
Mentor: VEŽA IVICA
Date of defense: 06/05/91
Number of pages: 47
Author: Petković student Boris
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Fakultet elektrotehnike, strojarstva i brodogradnje Split
Mentor: VEŽA IVICA
Date of defense: 01/05/94
Number of pages: 35
Author: Mandić student Vladimir
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Fakultet elektrotehnike, strojarstva i brodogradnje Split
Mentor: VEŽA IVICA
Date of defense: 03/05/92
Number of pages: 58
Author: Ohlhofer student Igor
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Fakultet elektrotehnike, strojarstva i brodogradnje Split
Mentor: VEŽA IVICA
Date of defense: 03/05/92
Number of pages: 61
Author: Matković student Tomislav
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Fakultet elektrotehnike, strojarstva i brodogradnje Split
Mentor: VEŽA IVICA
Date of defense: 10/09/95
Number of pages: 58
Author: Nedimović student Branko
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Fakultet elektrotehnike, strojarstva i brodogradnje Split
Mentor: ROVAN MARIO
Date of defense: 05/05/94
Number of pages: 78
Author: Bjeliš student Ivo
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Fakultet elektrotehnike, strojarstva i brodogradnje Split
Mentor: ROVAN MARIO
Date of defense: 10/05/94
Number of pages: 45
Author: Bratanić student Miki
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Fakultet elektrotehnike, strojarstva i brodogradnje Split
Mentor: ROVAN MARIO
Date of defense: 04/05/93
Number of pages: 53
Author: Šanić student Berislav
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Fakultet elektrotehnike, strojarstva i brodogradnje Split
Mentor: VEŽA IVICA
Date of defense: 05/05/91
Number of pages: 49
Author: Komlemović student Miroslav
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Fakultet elektrotehnike, strojarstva i brodogradnje Split
Mentor: ROVAN MARIO
Date of defense: 06/05/92
Number of pages: 40
Author: Sušak student Damir
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Fakultet elektrotehnike, strojarstva i brodogradnje Split
Mentor: VEŽA IVICA
Date of defense: 12/05/92
Number of pages: 65
Author: Žunić student Vinko
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Fakultet elektrotehnike, strojarstva i brodogradnje Split
Mentor: VEŽA IVICA
Date of defense: 01/05/94
Number of pages: 108
Author: Salahor student Mirsad
Degree level: D.A.
- Type of paper
: Computer program
Title: Program "QB-SIM" for simulation of manufacturing system
Odering party: Ministarstvo znanosti i tehnologije
Institution depot: Fakultet elektrotehnike, strojarstva i brodogradnje
HW platform: PC AT/386
Operating system: DOS
Programming language: Quick Basic ver. 4.5
Year: 1992
Summary: The main feature of the program is its originality in
developingthe simulation model. It is recommended for use in
discretsimulation of medium-complex, multi-phase and multi-runmanufacturing
system.
Keywords: Discrete-event simulation, manufacturing system, modeling
- Type of paper
: Computer program
Title: INFAP Interactive Facilities Planning
Odering party: Ministarstvo znanosti i tehnologije
Institution depot: Fakultet elektrotehnike, strojarstva i brodogradnje
HW platform: PC AT 386/486
Operating system: DOS
Programming language: Pascal, GRAFSIM
Year: 1993
Summary: INFAP system offers designers a possibility of
activeparticipation in every process step of production system design,and
of improving it with detailed information and criteria.Interactive computer
aided operation can include several goals:rearrangement costs, material
flow, good layout, etc.
INFAP system include the following modules:
1. Analysis of the production program
2. Design of technological procedures
3. Capacity requirementes
4. Material flow
5. Production system segmentation
6. Machine layout optimization
7. Simulation
Keywords: Interactive facilities planning, production system, simulation
- Type of paper
: Survey/Study
Title: Characteristic of the technological process manufacturing
of the gear box
- Authors:
- Bajić, Dražen (186194)
- Rovan, Mario (95654)
- Veža, Ivica (95643)
Ordering party: TEM-SPLIT
Institution depot: Fakultet elektrotehnike, strojarstva i brodogradnje
Year: 1993
Number of pages: 69
Language: hrvatski
- Type of paper
: Survey/Study
Title: Course of study of ship's power and electronics at the
Split Department of Marine Faculty Dubrovnik
- Authors:
- Kuzmanić, Ivica (153406)
Ordering party: Pomorski fakultet Dubrovnik
Institution depot: Pomorski fakultet Dubrovnik-Studij u Splitu
Year: 1992
Number of pages: 10
Language: hrvatski
Summary: This paper reviews the teaching program at the Ship's power
and electronics course of study. This program partly includes two teaching
programs done previously. The plan i program, their realization and student
body have been described.
Keywords: Ship's power and electronic, course of study
- Type of paper
: Project
Title: Environmental management of the Kaštela bay
- Authors:
- Rovan, Mario (95654)
Ordering party: CIMIS Centar za interdisciplinarna i multidiscipinarna istraživanja
Institution depot: CIMIS Centar za interdisciplinarna i multidiscipinarna istraživanja
Year: 1991
Number of pages: 34
Language: hrvatski
Summary: The project offered several scenarios chosen on the basis
of anumber of criteria such as: intensity of introduced change, thequality
of development and obstracles and the quality ofenvironment. On the basis
of the elaborated method of choice, anumber of scenarios have been
selected, all of which aim atimproving the existing condition on the
principle of intensiveand sustainable development. General speaking, it
implies thechange of strategy in national and coastal economy which is
toassume the characteristics of a scientific-intensive developmentmodel
oriented towards Europe and the world, while the attitudetowards
environment would be based on the principles ofsustainable development. The
market economy with mixed ownershipwould develop. However, the private
ownership would bepredominant, while the entire national economy would
undergo theprocess of restructuring. The development obstacles would
bepartly eliminated.
Keywords: Technology, Kaštela Bay, development
- Type of paper
: Project
Title: Design of the head stock
- Authors:
- Bajić, Dražen (186194)
- Bilić, Boženko (154905)
- Rovan, Mario (95654)
- Veža, Ivica (95643)
Ordering party: Dalstroj
Institution depot: Fakultet elektrotehnike, strojarstva i brodogradnje
Year: 1993
Number of pages: 340
Language: hrvatski
- Type of paper
: New product
Title: Fast radial drilling machine
- Authors:
- Rovan, Mario (95654)
- Bajić, Dražen (186194)
- Bilić, Boženko (154905)
- Veža, Ivica (95643)
Approved by institution: Dalstroj
Institution depot: Fakultet elektrotehnike, strojarstva i brodogradnje
Date of approval: 12/01/93
Decision number: U02-165/1
Language: hrvatski
Keywords: Fast radial drilling machine, electronic variable speed
- Type of paper
: New product
Title: Electric powered windlass
- Authors:
- Peruzović, Milivoj (172365)
Approved by institution: Hrvatski registar brodova
Institution depot: Fakultet elektrotehnike, strojarstva i brodogradnje
Date of approval: 06/28/95
Decision number: 697/S/020012
Language: hrvatski
Keywords: windlass
- Type of paper
: Invited lecture
Title: Simultaneous Engineering
Institution: Hrvatska akademija tehničkih znanosti
Year: 1995
- Type of paper
: Invited lecture
Title: Computer Integrated Manufacturing and Logistic
Institution: Hrvatsko društvo ekonomista, inženjera i tehničara
Year: 1995
- Type of paper
: Invited lecture
Title: Logistic systems
Institution: Hrvatska gospodarska komora-Županijska komora Split
Year: 1993
- Type of paper
: Invited lecture
Title: Optimization of the production systems by means of
simulation
Institution: Hrvatsko društvo za simulacijsko modeliranje
Year: 1992