- Type of paper
: Book
Title: Manual for Design of Reinforced Concrete Structures
- Authors:
- Tomičić, Ivan (49993)
- Editors
- Radić, Jure
Publisher: Društvo hrvatskih građevinskih konstruktora
ISBN: 953-6175-01-0
Year: 1993
Number of pages: 503
Number of references: 92
- Type of paper
: Paper in book
Title: Ductile Bearing Precast Reinforced Concrete Frame
Structures
- Authors:
- Tomičić, Ivan (49993)
- Editors
- Matković, V.
Publisher: HAZU-Razred za matematičke, fizičke, kemijske i tehničke znanosti
Year: 1992
Pages: from 101 to 114
Number of references: 10
- Type of paper
: Paper in journal
Title: Stress Analysis in Partially Prestressed Elements
- Authors:
- Tomičić, Ivan (49993)
Journal: Građevinar
Number: 1
ISSN: 0350-2465
Volume: 43
Year: 1991
Pages: from 9 to 16
Language: hrvatski
Summary: The advantages and drawbacks of partially prestressed
elementsand structures are discussed. Reasons and methods for
stressanalysis in cross-sections of partially prestressed elementsare
presented. The author proposed a modified expression for thecalculation of
prestress decline and stress increase in softreinforcement. Stress control
is carried out for the action ofexterior bending moment and for the
calculated forces inprestressed and soft reinforcement. The paper includes
an exampleto illustrate the procedure and study the effect of the
softreinfotcement quantity.
Keywords: partialy prestressed concrete, bending moments, soft reinforcement, prestressed reinforcement
- Type of paper
: Paper in journal
Title: Contribution to the Computation of Pressure Forced Slim
Elements
- Authors:
- Tomičić, Ivan (49993)
Journal: Ceste i mostovi
Number: 6
ISSN: 0411-6380
Volume: 37
Year: 1991
Pages: from 181 to 183
Language: hrvatski
Summary: In the article the reasons for the computatio of the
reinforcedslim elements forced by the excentric force using II class
theoryhave been listed. The approximate method for defining theinternal
forces on the deformed system which use effectivebending stiffness, has
been presented. Some new formulas forstiffness defining as the result of
latest research have beengiven. The procedure of the computation of the
quasi centricforced slim elements is exposed, i.e. the introduction of
minimumbending moment for reasons of incorrect construction and
otherfactors.
Keywords: buckling, slim elements, reinforced concrete, mathematical model
- Type of paper
: Paper in journal
Title: Analysis of Partially Prestressed Continuous Girders
- Authors:
- Tomičić, Ivan (49993)
Journal: Građevinar
Number: 11
ISSN: 0350-2465
Volume: 43
Year: 1991
Pages: from 557 to 563
Language: hrvatski
Summary: The paper analysis of partially prestressed continous
girdersaccording to the linear theory of elasticity with and
withoutredistributio, as well as according to the theory of
plasticity.Advantages of such analysis which yirldsmore racional
structuresare poited out. Expressions for the allowed redistribution andfor
necessary and actual ductility of cross section are given.The author
presents an example to illustrate the differences inresults according to
the above theories and to demonstrate theprocedure of analysis.
Keywords: partially prestressed concrete, redistribution, theory of plasticity, ductility
- Type of paper
: Paper in journal
Title: Temperature Strained Reinforced Concrete and Prestressed
Bridges
- Authors:
- Tomičić, Ivan (49993)
Journal: Ceste i mostovi
Number: 10
ISSN: 0411-6380
Volume: 37
Year: 1991
Pages: from 279 to 284
Language: hrvatski
Summary: In the article the non-linear temperature distribution in
thecross section is adopted by regulations of New Zealand isproposed. By
this distribution, balanced and continued stressesin the longitudinal and
transversal direction could be computed.For beter understanding of the
computation procedure the exampleof continuous reinforced concrete bridge
has be shown.
Keywords: temperature, load, reinforced concrete, prestressed concrete, bridge, cracing
- Type of paper
: Paper in journal
Title: Short Elements with or without Steel Fibres
- Authors:
- Tomičić, Ivan (49993)
Journal: Ceste i mostovi
Number: 5
ISSN: 0411-6380
Volume: 38
Year: 1992
Pages: from 119 to 123
Language: hrvatski
Summary: The review of theoretical and experimental research of
shortelements made of reinforced concrete with and without steelfibres and
respective computation working out reinforcementmethods have been
furnished. Advantages of reiforced cencreteshort elements made of fibrous
concrete as compared to thosewithout fibres have been listed. In order to
demonstrate themethod and arrive at a conclusion, the example of
shortreinforced concrete element computation and construction with
andwithout fibres have been shown.
Keywords: steel fibre, reinforced concrete, cantilever
- Type of paper
: Paper in journal
Title: Wall Supports with or without Steel Fibres
- Authors:
- Tomičić, Ivan (49993)
Journal: Ceste i mostovi
Number: 1
ISSN: 0411-6380
Volume: 39
Year: 1993
Pages: from 25 to 31
Language: hrvatski
Summary: The definition of wall support and their utilization
inreinforced concrete structures has been presented. For thedimensioning of
wall supports on bending moment the model ofconcrete arch and steel
stretces is proposed. The proposal forthe dimensioning of wall supports
strained by shear forcesincludes the application of new algorythms.
Keywords: reinforced concrete, steel, fibre, beam, wall
- Type of paper
: Paper in journal
Title: Analysis of Partially Prestressed Girders
- Authors:
- Tomičić, Ivan (49993)
Journal: Građevinar
Number: 2
ISSN: 0350-2465
Volume: 45
Year: 1993
Pages: from 87 to 96
Language: hrvatski
Summary: Advantages of partially prestressed concretes and the
method fortheir analysis are briefly described. The author proposes
analgorithm for the analysis which includes the limit state methodand the
allowed stresses method. The procedure determines thefinal dimensions of
girder in three ways, the quantity of softreinforcement in two ways, and
the quantity of prestressedreinforcement according to the procedure for
full prestressing.The rate stress increase in steel after cracking of
concrete asthe function of allowable crack widths and material fatique
ischosen in advance. The method is iterative, and illustrated on anexample.
Keywords: partially prestressed concrete, method of analysis, limit state, allowed stress, girder, soft reinforcement, prestressed reinforcement
- Type of paper
: Paper in journal
Title: Construction of Safe and Economic Apartment Buildings in
Seismic Areas
- Authors:
- Tomičić, Ivan (49993)
Journal: Civilna zaštita
Number: 2
ISSN: 1330-0148
Volume: 2
Year: 1993
Pages: from 107 to 111
Language: hrvatski
Summary: The article deals with possible bearing structures for
apartmentbuildings in seismic areas, designed to endure gravitation
andinertial. In high-rise buildings, the use of monolithic ceilingsis
advisable for horizontal reinforcement, while reiforcedconcrete walls and
shells encasing elevators and staircases couldbe used for vertical
reinforcement. For lower building,monolithic or prefabricated ceilings,
girded by horizontalserclage are also recommended as horizontal
reinforcement: wallsreinforced by horizontal serclage provide vertical
reinforcement.Vertical serclage is not necessary for two-floor or
lowerbuildings. Vertical reinforcement by reinforced concrete framesis not
advised because of high flexibility. Whenever possible, itis advisable to
use frames filled with bricks or blocks, in orderto achieve greater bearing
power rigidity, while reducingdeformability.
Keywords: apartment buildings, seismic forces, bearing structures
- Type of paper
: Paper in proceedings
Title: Design of Frame and Girder Structures According to Theory
of Plasticity
- Authors:
- Tomičić, Ivan (49993)
- Editors
- Atanasovski, S.
Proceedings title: Simpozium na društvoto na gradežnite konstruktori na Makedonija
Place: Ohrid, MA
Year: 1991
Pages: from 1 to 12
Meeting: 5 Simpozij Društva građevinskih konstruktora Makedonije
Held: from 08/27/91 to 08/29/91
- Type of paper
: Paper in proceedings
Title: Safety of Reinforced Concrete Slabs from Punching under
the Influence of Shear Forces and Flexural Moment
- Authors:
- Tomičić, Ivan (49993)
- Editors
- Perišić, Života
Proceedings title: Teoretska i eksperimentalna istraživanja
Place: Beograd, YU
Year: 1991
Pages: from 195 to 200
Meeting: IX kongres DGKJ
Held: from 04/09/91 to 04/12/91
- Type of paper
: Paper in proceedings
Title: Theorecical and Expirimental Investigations of Plastic
Hinges in Reinforced Concrete Structures
- Authors:
- Tomičić, Ivan (49993)
- Editors
- Alfirević, Ivo
Place: Zagreb
Year: 1991
Pages: from 135 to 140
Meeting: 7. simpozij o plastičnosti
Held: from 06/12/91 to 06/15/91
- Type of paper
: Paper in proceedings
Title: Reinforced Concrete and Prestressed Beams made of Fiber
Concrete Simultaneously Subjected to Bending, Torsion and Shear
- Authors:
- Tomičić, Ivan (49993)
- Editors
- Radić, Jure
Proceedings title: Prvi znanstveni kolokvij MOSTOVI
Place: Zagreb
Year: 1991
Pages: from 185 to 193
Meeting: Drugi radni sabor: Graditelji u obnovi Hrvatske
Held: from 06/20/91 to 06/22/91
- Type of paper
: Paper in proceedings
Title: Clasification and Repair of Reinforced and Prestressed
Concrete Structures Damaged during the War
- Authors:
- Tomičić, Ivan (49993)
- Editors
- Vrbanek, Josip
Proceedings title: Industrija nemetala u obnovi i razvoju Republike Hrvatske
Place: Zagreb
Year: 1992
Pages: from 258 to 272
Meeting: Simpozij: Industrija nemetala u obnovi i razvoju Republike Hrvatske
Held: from 04/23/92 to 04/24/92
- Type of paper
: Paper in proceedings
Title: Computer Programe for Designing Partialy Prestessed
Concrete Beams with a View to Flexural Strenght and Serviceability
- Authors:
- Prpić, Veljko
- Tomičić, Ivan (49993)
- Editors
- Dvornik, Josip
Proceedings title: Kompjutor u obnovi Hrvatske
Place: Zagreb
Year: 1992
Pages: from 233 to 238
Meeting: Primjena računala u graditeljstvu
Held: from 05/13/92 to 05/15/92
- Type of paper
: Paper in proceedings
Title: Partialy Prestressed Structures with Unbonded Tendons
- Authors:
- Tomičić, Ivan (49993)
- Editors
- Radić, Jure
Proceedings title: Graditelji u obnovi Hrvatske
Place: Zagreb
Year: 1992
Pages: from 155 to 164
Meeting: Radni sabor: Graditelji u obnovi Hrvatske
Held: from 06/25/92 to 06/27/92
- Type of paper
: Paper in proceedings
Title: Serviceability Limit State According to EUROCODE 2
- Authors:
- Tomičić, Ivan (49993)
- Editors
- Atanasovski, S.
Place: Ohrid, MA
Year: 1993
Pages: from 1 to 9
Meeting: 5 Simpozij Društva građevinskih konstruktora Makedonije
Held: from 09/23/93 to 09/24/93
- Type of paper
: Paper in proceedings
Title: Designing Concrete Structures According to EUROCODE 2
- Authors:
- Sorić, Zorislav
- Tomičić, Ivan (49993)
- Editors
- Simović, Veselin
Proceedings title: Graditeljstvo u strategiji obnove i razvoja republike Hrvatske
Place: Zagreb
Year: 1993
ISBN/ISSN: 953-96085-0-3
Pages: from 835 to 850
Meeting: Sabor hrvatskih graditelja
Held: from 09/30/93 to 10/02/93
- Type of paper
: Paper in proceedings
Title: Design of Reinforced Concrete Structures made of High
Strenght Concrete
- Authors:
- Tomičić, Ivan (49993)
- Editors
- Radić, Jure
Proceedings title: Graditelji u obnovi Hrvatske
Place: Zagreb
Year: 1993
ISBN/ISSN: 953-6175-02-9
Pages: from 9 to 14
Meeting: Drugi radni sabor: Graditelji u obnovi Hrvatske
Held: from 10/13/93 to 10/15/93
- Type of paper
: Paper in proceedings
Title: Design of Reinforced Concrete and Prestressed Structures
According to EUROCODE 2
- Authors:
- Tomičić, Ivan (49993)
- Editors
- Radić, Jure
Proceedings title: Graditelji u obnovi Hrvatske
Place: Zagreb
Year: 1993
ISBN/ISSN: 953-6175-02-9
Pages: from 15 to 34
Meeting: Drugi radni sabor: Graditelji u obnovi Hrvatske
Held: from 10/13/93 to 10/15/93
- Type of paper
: Paper in proceedings
Title: Repair and Strenghtening of Damaged Reinforced and
Prestressed Concrete Structures
- Authors:
- Tomičić, Ivan (49993)
- Editors
- Kordić, Zdenko
Proceedings title: Pravci razvoja Hrvatske zajednice Herceg-Bosna
Place: Mostar, BH
Year: 1993
Pages: from 83 to 96
Meeting: Znanstveno-stručni skup: Pravci razvoja Hrvatske zajednice Herceg-Bosna
Held: from 04/22/93 to 04/23/93