- Type of paper
: Paper in book
Title: Communications in Network Control Systems
- Authors:
- Glavinić, Vlado
- Editors
- Kljajić, J.
- Budin, Leo
Publisher: Hrvatsko društvo za mikroprocesorske, procesne i informacijske sustave, mikroelektroniku i elektroniku - MIPRO
ISBN: 953-6042-04-5
Year: 1993
Pages: from 0 to 0
Number of references: 43
Language: hrvatski
Summary: The architecture of an electric power system is proposed in
thispaper which is based on the management hierarchy, and structuredas an
internetwork. The basic standardization concepts arespecified and the
adequate functional profiles described; thelatter reduce to variants of the
MAP/TOP protocol suite. Specalattention is devoted to local networks,
starting from domain
definition, suitable topologies and transmission media, up toaccepted
standards for the first two OSI RM layers. Thearchitectures of metropolitan
networks and field busses are shownas well, together with the relevant
standards and caseimplementations. Finally, the methodology for local
networksinterconnection is described, too.
Keywords: electric power system networking, functional profiles, local networks, metropolitan networks
- Type of paper
: Paper in book
Title: Networking Architectures and Standards
- Authors:
- Glavinić, Vlado
- Editors
- Kljajić, J.
- Budin, Leo
Publisher: Hrvatsko društvo za mikroprocesorske, procesne i informacijske sustave, mikroelektroniku i elektroniku - MIPRO
ISBN: 953-6042-06-1
Year: 1994
Pages: from 5.1 to 5.16
Number of references: 55
Language: hrvatski
Summary: The communication infrastructure is an essential component
of the electric power control system, especially regarding its opening. The
standardization prerequisites of networking are specified in this paper,
along with the characteristic solutions, here including also the applied
standard network architectures and internetwork construction methods.
Keywords: referent networking architecture, WANs, LANs, field buses
- Type of paper
: Paper in book
Title: Fundamentals of Communication at Substation Level
- Authors:
- Glavinić, Vlado
- Editors
- Kljajić, J.
- Budin, Leo
Publisher: Hrvatsko društvo za mikroprocesorske, procesne i informacijske sustave, mikroelektroniku i elektroniku - MIPRO
ISBN: 953-6042-06-1
Year: 1995
Pages: from 2.41 to 2.76
Number of references: 20
Language: hrvatski
Summary: The communication subsystem of the Energy Power System
control is the infrastructure base enabling the interconnection of system
components into a unified control/management system. Networking at the
substation resp. bay level occupies a significant place in the
implementation of this system. The possibilities for networking at the
substation/bay level as well as the interconnection with other parts of the
system are discussed, and the applicable communication models and standard
solutions according to the concept of open systems are presented in this
paper.
Keywords: referent networking architectures, referent communication models for Energy Power Systems, networking for control objects, LANs, field busses
- Type of paper
: Paper in book
Title: The Concept of Openness and Standardization in Electric
Power System Control
- Authors:
- Budin, Leo
- Editors
- Kljajić, J.
- Budin, Leo
Publisher: Hrvatsko društvo za mikroprocesorske, procesne i informacijske sustave, mikroelektroniku i elektroniku - MIPRO
ISBN: 953-6042-06-1
Year: 1994
Pages: from 3.1 to 3.9
Number of references: 6
Language: hrvatski
Summary: The paper describes the basic open system concepts applied
to
energy management and supervisory control and data acquisition in
electric power systems. Modern systems, offered by all
significant suppliers of hardware, software and integrated system
solutions, follow this concept. It can be stated that this
approach will prevail in the near future because it enables, at
the same time, increased availability and possibility of
continuous upgrading with significant independence of the user
from the original system supplier.
- Type of paper
: Paper in journal
Title: The Texture and Natural Forms
- Authors:
- Mihajlović, Željka
Journal: Automatika
Number: 1
ISSN: 0005-1144
Volume: 31
Year: 1990
Pages: from 25 to 33
Summary: The method for recursive shaping of natural objects is
described.The example of this method is worked out in rendering trees.
Themost important characteristic of this method is a possibility ofan
effect on the final shape. The method for texture mapping onpolygons of an
object is also described. This method for texture
mapping is linear. As we wont more natural look of objects, thetexture
mapping is used for mapping simulated bark texture onpolygons of trees.
Keywords: natural forms, fractal, texture.
- Type of paper
: Paper in journal
Title: Syntax Analysis of Sequential Control Programs
- Authors:
- Srbljić, Siniša (120804)
Journal: Automatika
Number: 34
ISSN: 0005-1144
Volume: 32
Year: 1991
Pages: from 101 to 106
Number of references: 7
Language: hrvatski
Summary: In control systems there is a need of simultaneous
translationsand sequential control program analysis. There are
severalhierarchic levels of the complex sequential control programanalysis:
lexical, syntax and semantical analysis. The design ofa syntax analyzer is
presented. It is shown that syntaxcorrectness of an instruction depends on:
the structure of theanalized instruction, the structuresof the instructions
executedbefore the nanalyzed instruction and the structures of
theinstructions executed after the analized instruction. A grammarwhich
includes the backward and forward context analysis isdeveloped. This
grammar is applied in the analysis of the partprograms of the machine tool
control unit.
Keywords: dynamic interpreter, syntax analysis, real time systems sequential control programs, machine tool control
- Type of paper
: Paper in journal
Title: Croatian Terminology in Computing and Information
Technology
- Authors:
- Budin, Leo
Journal: Journal of Computing and Information Technology (CIT)
Number: 1
ISSN: 1330-1136
Volume: 1
Year: 1993
Pages: from 75 to 78
Language: hrvatski
Summary: The outgrowth of Croatian terminology was not always
consistentdue to uncontrolled translations of new English terms
coinedduring the evolution of the fields of computing and
informationtechnology. Even in the field names there exists
somecontroversy. Therefore, the paper introduces Croatian terms andexplains
the definitions of computer science and engineering,computing, information
science, information technology andinformatics.
- Type of paper
: Paper in journal
Title: Book Review K. Tarnay: Protocol Specification and Testing
- Authors:
- Glavinić, Vlado
Journal: Automatika
Number: 34
ISSN: 0005-1144
Volume: 32
Year: 1991
Pages: from 122 to 123
Language: hrvatski
- Type of paper
: Paper in journal
Title: Modification of Cache Coherence Protocols for the
Distributed Environment
- Authors:
- Srbljić, Siniša (120804)
Journal: Automatika
Number: 1
ISSN: 0005-1144
Volume: 34
Year: 1993
Pages: from 29 to 40
Number of references: 24
Language: engleski
Summary: We develop one group of data replication coherence
protocols onthe basis of seven well-known decentralized cache
coherenceprotocols (Write-Through, Write-Once, Synapse, Illinois,Firefly,
Berkeley and Dragon). The original cache coherenceprotocols were designed
for the bus-based multiprocessors and wemodify them for use in the message
passing distributedenvironment with any kind of interconnection network. We
alsointroduce a uniform formal model for describing theimplementation of
the data replication coherence protocols indistributed environment. The
formal model is based on theMealy state machine.
Keywords: coherence protocols, data replication, distributed system, formal model, Mealy state machine, message passing
- Type of paper
: Paper in journal
Title: The State of the Art and Predicatble Future of Information
Technology and its Application in Integrated Production Systems
- Authors:
- Budin, Leo
Journal: Tekstil, Časopis za tekstilnu tehnologiju i konfekciju
Number: 1
ISSN: 0492-5882
Volume: 44
Year: 1995
Pages: from 1 to 9
Number of references: 9
Language: hrvatski
Summary: This short survey presents the state of the art of computer
and communication technoligies, lately known under the common name
information technology (IT). Contemporary technological possibilities and
the importance of standardization on all implementation levels are pointed
out. The open systems concept, which is expected to enable a gradualand
natural growth of computer integrated production systems, is emphasized.
- Type of paper
: Paper in proceedings
Title: Design of an Embedded Programmable Logic Controller in a
Modular Multimicroprocessor CNC Unit
- Authors:
- Grčanac, Tomislav
- Paučić, Darko
Proceedings title: 3. SONT-Zbornik III
Language: hrvatski
Place: Zagreb
Year: 1991
Pages: from 105 to 108
Meeting: 3. Međunarodni simpozij o novim tehnologijama
Held: from 10/15/91 to 10/17/91
Summary: A modern computer numerical control (CNC) unit must be
easilyadaptable for different machine tools. Therefore, a programmablelogic
controller (PLC) should be a part of the CNC unit as anadaptable interface.
The PLC can be a software task in asingle-processor CNC unit or a module
with its own microprocessorin a multiprocessor unit. The article deals with
characteristicsof the programmable logic controller in the CNC unit where
themicroprocessor module is assigned for each distinct function ofthe unit.
Hardware, the programming model and the programexecution in the PLC are
described.
- Type of paper
: Paper in proceedings
Title: Extended State Machine as a Formal Model of Data
Replication Coherence Protocols
- Authors:
- Grčanac, Tomislav
- Srbljić, Siniša (120804)
Proceedings title: Proc. of the 14th Int. Conference on Information Technology Interfaces
Language: engleski
Place: Pula
Year: 1992
Pages: from 115 to 120
Meeting: ITI '92 - 14th International Conference on Information Technology Interfaces
Held: from 09/15/92 to 09/18/92
Summary: The extended state machine (ESM) is an upgrade of the
well-knowntheory of finite state automata, but it provides for
synchronizedcooperation and communication. In addition, events and
actionsare time bounded. The most important property of ESMs is
theirability to model not only open-loop plant processes, but also
theprocesses of the controller as separate modules. The real-timetemporal
logic (RTTL) is being used to prove some properties ofthe system modeled
with an ESM. As an example of use of the ESM,the model of the Write-Through
data replication coherenceprotocol in the distributed environment is given.
Keywords: data replication coherence protocols, extended state machine, real-time temporal logic.
- Type of paper
: Paper in proceedings
Title: The Algoritam for Fast Rendering and Shading of Polygons
- Authors:
- Mihajlović, Željka
- Mihajlović, S.
- Urh, Z.
Proceedings title: XXXV jugoslavenska konferencija ETAN-a
Language: hrvatski
Place: Ohrid, Makedonija
Year: 1991
ISBN/ISSN: 86-80509-03-5
Pages: from 345 to 352
Meeting: XXXV jugoslavenska konferencija ETAN-a
Held: from 06/03/91 to 06/07/91
Summary: In the article there is described the procedure of fast
renderingpolygons. In the procedure, shading is included and
hidingsurfaces using the method of Z-buffer. By this entire review of3D
polygons is realised. Basic method used in the procedure ofrendering
polygon, shading and hiding surfaces is method DDA.
Complete procedure is based on integer arithmetics. The advantageof such
way of rendering is in the speed and a possibility of thehardware
implementation.
Keywords: computer graphics, shading, z-buffer, DDA-algorithm
- Type of paper
: Paper in proceedings
Title: One Aproach to the Visualization of the Three-Dimenzional
Fractal Objects
- Authors:
- Mihajlović, Željka
- Mihajlović, S.
Proceedings title: Proc. of the 37th International Annual Gathering KoREMA
Language: hrvatski
Place: Zagreb
Year: 1992
ISBN/ISSN: 86-81571-11-7
Pages: from 631 to 634
Meeting: 37. Međunarodni godišnji skup KoREMA
Held: from 04/26/92 to 04/29/92
Summary: This paper is concerned with rendering of the
fractalthree-dimensional objects using the volume visualization
method.Typically, used method is known under the name "marching cube".That
method is worked out and modified so that data amount isreduced. Modified
method is also useful in volume visualizationin many other scientific
fields.
Keywords: visualization, volume visualization, fractal, marching cube
- Type of paper
: Paper in proceedings
Title: Visualization of the 3D Objects
- Authors:
- Mihajlović, Željka
- Mihajlović, S.
Proceedings title: MTS Mikroračunala u tehničkim sustavima
Place: Opatija
Year: 1992
ISBN/ISSN: 86-385-0114-5
Pages: from 3144 to 3149
Meeting: MIPRO
Held: from 05/18/92 to 05/21/92
Summary: The paper is concerned with volume visualization
techniques.Particulary the method under the name marching cubes
isdescribed. Using that method some errors may appear, so detectionand
elimination is proposed. The marching cube method on 3Dfractal object
representation is applied.
Keywords: visualization, marching cubes, fractal objects
- Type of paper
: Paper in proceedings
Title: Three-Dimensional Reconstruction of the Fractal Sets
- Authors:
- Mihajlović, Željka
- Mihajlović, S.
Proceedings title: Proc. of the International Conference Design to Manufacture in Modern Industry
Language: hrvatski
Place: Bled, Slovenija
Year: 1993
ISBN/ISSN: 86-345-0100-0
Pages: from 326 to 333
Meeting: International Conference Design to Manufacture in Modern Industry
Held: from 06/07/93 to 06/09/93
Summary: In this paper several methods for reconstruction of 3D
images arepresented. Some of these methods use the geometric primitives,and
other render the object directly. Methods that visualize data without
fitting geometric primitives are named volume rendering methods. They made
superior results, but they are time consuming and have great memory
requirements. Methods that fit geometric primitives first are the
cuberille method and the marching cube method.
Julia set is used as data for different volume visualization methods. These
methods do not depend on scaling factor, so any sampled data or vector
fields of three spatial dimensions can be visualized.
Keywords: visualization, fractals, volume rendering, voxel
- Type of paper
: Paper in proceedings
Title: An Application of Simplex Algorithm in Wire Frame Convex
Solids Rendering
- Authors:
- Mihajlović, Željka
- Babić, S.
Proceedings title: MIPRO
Language: hrvatski
Place: Opatija
Year: 1993
ISBN/ISSN: 953-6042-01-0
Pages: from 2110 to 2115
Meeting: MIPRO
Held: from 05/24/93 to 05/27/93
Summary: An application of simplex algorithm possibility in
computergraphics is described in this paper. A solid is given by
planeequations, which approximate a surface of the solid. From
theseequations the coordinates of each solid's vertices using
simplexalgorithm are calculated. In this way the list of edges andpolygons
of the considered solid is created. The advantage ofthis algorithm consists
in a simple calculation of theintersection of two or more solids.
Keywords: computer graphics, simplex algorithm
- Type of paper
: Paper in proceedings
Title: Efficient Static Task Scheduling
- Authors:
- Mrković, Miranda
Proceedings title: MTS - Mikroračunala u tehničkim sustavima
Language: hrvatski
Place: Opatija
Year: 1992
Pages: from 3115 to 3119
Meeting: MIPRO
Held: from 05/18/92 to 05/21/92
- Type of paper
: Paper in proceedings
Title: Logical Form of the Function Selecting Alternatives
- Authors:
- Mrković, Miranda
Proceedings title: 3. međunarodni simpozij o novim tehnologijama
Language: hrvatski
Place: Zagreb
Year: 1991
Pages: from 142 to 144
Meeting: 3. Međunarodni simpozij o novim tehnologijama
Held: from 10/15/91 to 10/17/91
Summary: To formulate a problem of selection and acceptation of
solutionmeans to define a set from which the selection will be done andan
objective function on that set. This work attempt to describethe logical
for of objective function. That form aloud operatingwith an objective
function as we do with logical, sow selectingof solutions is easier.
- Type of paper
: Paper in proceedings
Title: Parallel Algorithm for Tearing Large-Scale Networks
- Authors:
- Bunjevac, Hrvoje (165832)
Proceedings title: 3. međunarodni simpozij o novim tehnologijama
Language: engleski
Place: Zagreb
Year: 1991
Pages: from 16 to 18
Meeting: 3. Međunarodni simpozij o novim tehnologijama
Held: from 10/15/91 to 10/17/91
Summary: A parallel heuristic agorithm for the tearing of an
undirectedgraph is described. Graph is partitioned into subgraphs ofroughly
equal size such that verticesib same subgraph arestrongly interconnected,
whereas vertices in the differentsubgraphs are weakly interconnected.
Algorithm is applied to theproblem of parallel block oriented node-tearing
nodal analysis.
- Type of paper
: Paper in proceedings
Title: Adaptive Algorithm for Distributed Share Memory Management
- Authors:
- Bunjevac, Hrvoje (165832)
- Editors
- Čerić, Vlatko
- Čerić, Vlatko
- Hljuz Dobrić, Vesna
Proceedings title: ITI '93, Proceedings of the 15th International Conference on Information T. Int.
Language: engleski
Place: Pula
Year: 1993
ISBN/ISSN: 1330-1012
Pages: from 245 to 250
Meeting: 37. Međunarodni godišnji skup KoREMA
Held: from 06/15/93 to 06/18/93
Summary: It is shown that the performance of algorithms
implementingdistributed shared memory is sensitive to the memory
accessbehaviour of applications. In this paper we develop algorithmthat can
dynamically adapt mechanism which ensure consistency indistributed shared
memory. In order to dynamically changemechanism according to the
application's behaviour the decisionfunction is introduced. For
implementing the decision function itis necessary to measure application's
parameters during the runtime. The simple computation shows that new
algorithm mayoutperform some known algorithms which use single mechanism
forimplementing distributed shared memory.
Keywords: distributed system, shared memory model, consistency, adaptivealgorithm, decision function
- Type of paper
: Paper in proceedings
Title: Kernel for Real-Time Operatin System (HRTOS)
- Authors:
- Budin, Leo
- Brašnić, D.
- Hrustić, Z.
Proceedings title: 38. međunarodni skup KoREMA
Language: hrvatski
Place: Zagreb
Year: 1993
ISBN/ISSN: 953-6037-00-9
Pages: from 194 to 196
Meeting: 38. Međunarodni godišnji skup KoREMA
Held: from 04/26/93 to 04/28/93
Summary: This paper describes kernel for real-time operating
system(HRTOS). Kernel is suited for use in embedded systems.Predictability
of tasks execution is enforced. Kernel can beeasily adapted to the specific
demands of application.Tractability of systems behaviour is incorporated in
kernel.Maximal utilisation of system resources can be achieved withminor
modifications in kernel.
- Type of paper
: Paper in proceedings
Title: An Implementation of a Large Scale Circuit Simulator on a
Multi-Processor System
- Authors:
- Omrčen-Čeko, Goran
Proceedings title: Proc. of the 15th Int. Conference on Information Technology Interfaces
Language: engleski
Place: Zagreb
Year: 1993
ISBN/ISSN: 1330-1012
Pages: from 407 to 411
Meeting: ITI '93 - 15th International Conference on Information Technology Interfaces
Held: from 06/15/93 to 06/18/93
Summary: Solving large-scale systems of linear algebraic equations
is oneof problems that arises in the analysis of large-scale electrical
networks. To allow parallel processing, in finding the network
solution, a partitioning of the network equations is used. An
efficient way for storing a large-scale system in amulti-processor
environment is discussed and compared to standardtechniques for storing
sparse matrices. Algorithm suitable forsolving such systems is analyzed.
Suggested algorithm is builtinto a program for analysis of large-scale
electrical networks.
Keywords: large-scale el. circuit analysis, network tearing, parallel computing
- Type of paper
: Paper in proceedings
Title: Analytical Performance Evaluation of Data Replication
Based Shared Memory Model
- Authors:
- Srbljić, Siniša (120804)
- Budin, Leo
Proceedings title: Proc. of the Second International Symposium on High Performance Distr. Comp.
Language: engleski
Place: Spokane, Washington, USA
Year: 1993
Pages: from 326 to 335
Meeting: 2nd International Symposium on High Performance Distributed Computing
Held: from 07/20/93 to 07/23/93
Summary: The proposed distributed shared memory model is based on a
datareplication scheme that provides an environment for a collectionof
processes that interact to solve a parallel programmingproblem. In the
implementation of the scheme we suppose that thereplicas of the shared data
are present at each node and that anappropriate coherence protocol for
maintaining the consistencyamong the replicas is applied. The performance
of the distributedcomputation is very sensitive to the data-access behavior
of theapplication and to the applied coherence protocol. Communicationcost
is regarded as an appropriate performance measure.Therefore, we first
introduce a model characterizing the
computation behavior with five workload parameters. Second, weformally
describe the coherence protocols as cooperating statemachines in order to
evaluate their communication costs asfunctions of workload parameters.
- Type of paper
: Paper in proceedings
Title: The Design of the Ownership Control Algorithm for Data
Replication Coherence Protocols
- Authors:
- Srbljić, Siniša (120804)
Proceedings title: Proc. of the 14th Int. Conference on Information Technology Interfaces
Language: engleski
Place: Pula
Year: 1992
Pages: from 273 to 278
Meeting: ITI '92 - 14th International Conference on Information Technology Interfaces
Held: from 09/15/92 to 09/18/92
Summary: Seven well-known decentralized cache coherence
protocols,designed for the bus-based multiprocessors
(Write-Once,Write-Through, Synapse, Illinois, Berkeley, Dragon, and
Firefly)are adapted for use in a distributed environment. Thebroadcasting
mechanism is based only on message passing. Themodified coherence protocols
are analysed by means of the Mealymachine model as the formal tool. The
design of the ownershipcontrol algorithm is presented in this paper. Given
algorithm
is applied in the adapted Berkeley and Dragon protocols.
Keywords: distributed systems, data replication, coherence protocols, formal model, ownership control algorithm
- Type of paper
: Paper in proceedings
Title: Implementation of Coherence Protocols on Transputer
Networks
- Authors:
- Srbljić, Siniša (120804)
Proceedings title: Zbornik radova 38. međunarodnog godišnjeg skupa KoREMA
Language: engleski
Place: Zagreb
Year: 1993
ISBN/ISSN: 953-6037-00-9
Pages: from 189 to 193
Meeting: 38. Međunarodni godišnji skup KoREMA
Held: from 04/26/93 to 03/28/93
Summary: The use of replicated data in local memories of
transputermodules lessens the link traffic significantly, but can lead
toinconsistency among the copies of the same shared data. Toovercome this
problem, we adapt seven well-known cache coherenceprotocols, designed for
the bus based multi-processor systems,for implementation on loosely coupled
distributed systems such astransputer networks. We introduce a unified
formal terminologyfor describing coherence protocols. In this paper, we
discussimplementation of the Write-Through protocol in occam that isused to
maintain the consistency among the replicated data intransputer network.
- Type of paper
: Paper in proceedings
Title: An Asynchronous Ownership Control Algorithm for Berkeley
Protocol
- Authors:
- Srbljić, Siniša (120804)
Proceedings title: Proc. of the 15th International Conference on Information Technology Interfaces
Language: engleski
Place: Pula
Year: 1993
ISBN/ISSN: 1330-1012
Pages: from 287 to 294
Meeting: ITI '93 - 15th International Conference on Information Technology Interfaces
Held: from 06/15/93 to 06/18/93
Summary: The proposed distributed shared memory is based on
datareplication and on an appropriate coherence protocol whichmaintains the
consistency among the copies of the same data. Theperformances of data
replication coherence protocols are verysensitive to the applied ownership
control algorithm. To
improve the availability of the Berkeley protocol we design anasynchronous
ownership control algorithm.
Keywords: distributed systems, data replication, coherence protocols, formal model, ownership control algorithm, Berkeley protocol
- Type of paper
: Paper in proceedings
Title: Personification of Visual User Interfaces Using Methods of
visual Programming
- Authors:
- Glavinić, Vlado
- Delija, D.
Proceedings title: Zbornik radova XV simpozijuma o informacijskim tehnologijama
Language: hrvatski
Place: Sarajevo, Bosna i Hercegovina
Year: 1991
Pages: from 1471 to 1477
Meeting: XV simpozij o informacijskim tehnologijama
Held: from 03/25/91 to 03/29/91
Summary: The requirements and problems of personification of visual
userinterface through methods and tehniques of visual programming
are discussed. A simple visual programming language interpreteris described
as an example.
Keywords: user interfaces, requirements for visual user interfaces, visual programming
- Type of paper
: Paper in proceedings
Title: A Classification of Models for Error Recovery in
Interactive Systems
- Authors:
- Glavinić, Vlado
- Meštrović, V.
Proceedings title: Zbornik radova XV simpozijuma o informacijskim tehnologijama
Language: hrvatski
Place: Sarajevo, Bosna i Hercegovina
Year: 1991
Pages: from 1211 to 1218
Meeting: XV simpozij o informacijskim tehnologijama
Held: from 03/25/91 to 03/29/91
Summary: Some known models for error recovery in interactive systems
areanalysed in this paper. According to the inherent recovery
commands, the present models are classified as monadic, diadicand triadic.
The models are analysed w.r.t. relevant properties.
Keywords: interactive systems, error recovery, classification of recovery models
- Type of paper
: Paper in proceedings
Title: An Integrated Environment for Specification of OSI Systems
- Authors:
- Glavinić, Vlado
- Žilić, Ž.
Proceedings title: Proc. of the IEEE Conf. MELECON 91
Language: engleski
Place: New York, USA
Year: 1991
ISBN/ISSN: 0-87942-655-1
Pages: from 1011 to 1014
Meeting: IEEE Conference MELECON '91, 6th Mediterranean Electrotechnical Conference
Held: from 05/22/91 to 05/24/91
Summary: An integrated environment for protocol specification, based
onthe LOTOS language is given. The environment consists of a
syntax-driven editor, a user friendly command shell, and anassisted C++
code compiler. An overview of the underlying LOTOS
based language is given. Finally, a nontrivial exampleillustrates the
protocol specification style forced by thelanguage.
Keywords: protocol specification, LOTOS, integrated development environment
- Type of paper
: Paper in proceedings
Title: Model of Structure Editor Architecture Based on
Interconnection Networks
- Authors:
- Glavinić, Vlado
Proceedings title: ETAN
Language: hrvatski
Place: Ohrid, Makedonija
Year: 1991
ISBN/ISSN: 86-80509-03-5
Pages: from 59 to 66
Meeting: XXXV jugoslavenska konferencija ETAN-a
Held: from 06/03/91 to 06/07/91
Summary: A structure editor model based on interconnection networks
isdescribed in this paper. The model is developed using aparticular tree
representation by means of a two-dimensionaldoubly-linked structure. The
basic operations are implementedexchanging pointers on memory cells storing
node descriptors,leading to the application of interconnection networks.
Theoperational semantics of model functionality is described bymeans of
dynamic algebras, from which two implementations arederived.
Keywords: structure editor model, interconnection networks, operational semantics, dynamic (evolving) algebras
- Type of paper
: Paper in proceedings
Title: Execution of Visual Programming Language Based User
Interfaces
- Authors:
- Delija, D.
- Glavinić, Vlado
Proceedings title: Zbornik radova 3. međunarodnog simpozija o novim tehnologijama
Language: engleski
Place: Zagreb
Year: 1991
Pages: from 23 to 28
Meeting: 3. Međunarodni simpozij o novim tehnologijama
Held: from 10/15/91 to 10/17/91
Summary: A methodology for production of user interfaces based on
visualprogramming languages is described in this paper. Thismethodology
builds upon a visual objects database, and a relatedvisual programming
language processor. The mutual relationshipsof visual language constructs,
resp. the method of theirconstruction, is reflected in the underlying data
structure
domain.
Keywords: vizualna korisnička sučelja, vizualno programiranje, strukturiranje podataka
- Type of paper
: Paper in proceedings
Title: A Processor Architecture for Structured Text Manipulation
- Authors:
- Glavinić, Vlado
Proceedings title: Zbornik 3. međunarodnog simpozija o novim tehnologijama
Language: engleski
Place: Zagreb
Year: 1991
Pages: from 29 to 34
Meeting: 3. Međunarodni simpozij o novim tehnologijama
Held: from 10/15/91 to 10/17/91
Summary: The accepted modern approach to text processing envisions
astructured paradigm, what in turn implies an adequate processorof the
document inherent structure. A judiciously chosenprocessor architecture can
improve the processor time properties.In this paper a processor
architecture for a structure editor isdevised which is based upon the
internal representation of theusual tree structure with a two-dimensional
doubly-linked list.The architecture is formally described by means of
dynamicalgebras. The possible parallelisms in processor operation
arederived from such a formalization, so leading to processorarchitectures
of desired properties.
Keywords: processor architecture, structure editor, tree structure representation
- Type of paper
: Paper in proceedings
Title: Computing Program at the Faculty of Electrical
Engineering, University of Zagreb
- Authors:
- Budin, Leo
- Glavinić, Vlado
- Peruško, Uroš
- Ribarić, Slobodan
Proceedings title: Zbornik radova 7. godišnjeg skupa KoREMA
Language: hrvatski
Place: Zagreb
Year: 1992
ISBN/ISSN: 86-81571-11-7
Pages: from 187 to 193
Meeting: 37. Međunarodni godišnji skup KoREMA
Held: from 04/26/92 to 04/29/92
Summary: After some introductory explanations on the discipline
ofcomputing, the historical development of the computing program atthe
Faculty of Electrical Engineering, University of Zagreb isillustrated. A
critical review on the present undergraduatecurriculum is given. The
necessary knowledge is specified, andthe basis for respective curriculum
proposed.
Keywords: computing program, computing curriculum, review
- Type of paper
: Paper in proceedings
Title: Designing Systems for Highly Parallel and Distributed
Computing
- Authors:
- Vidović, Nino
- Vrsalović, Dalibor F.
- Budin, Leo
Proceedings title: Proceedings of the 24th Hawaii International Conference on Systems Sciences
Language: engleski
Place: Koloa, Hawaii, USA
Year: 1991
Pages: from 75 to 84
Meeting: 24th Hawaii International Conference on Systems Sciences
Held: from 01/08/91 to 01/11/91
Summary: The parallel computational model with data flow sequencing
isintroduced. Description of the basic principles and features ofmpDF, a
massively parallel architecture, based on the dataflowoperational model and
RISC organizational principles ispresented. The analythical performance
model is developed toevaluate proposed architectural solution for
distributed/parallelcomputing based on data flow sequencing of
instructions.Algorithmic performance model is extended to
includecharacterization of the parallel programs in terms of the
averageparallelism. Model is solved for number of different workloads.The
values of the basic architectural characterisctics areanalyzed showing that
architecture is well balanced providingconsisitent performance for wide
range of parallel applications.
- Type of paper
: Paper in proceedings
Title: Performance Issues in IEEE 802.6 MAN Subnetwork
- Authors:
- Žilić, Ž.
- Peškir, Goran
Proceedings title: Proc. of the IEEE Conf. MELECON '91, 6th Mediterrane. Electrotechn. Conf. Vol II
Language: engleski
Place: Ljubljana, Slovenija
Year: 1991
ISBN/ISSN: 0-87942-655-1
Pages: from 1007 to 1010
Meeting: IEEE Conference MELECON '91, 6th Mediterranean Electrotechnical Conference
Held: from 05/22/91 to 05/24/91
Summary: This paper gives the approximate analysis of the newly
proposedIEEE 802.6 standard describing the Media Access Control
sublayerprotocol for the Metropolitan Area Networks. The modelsdescribing
the protocol are reviewed and compared and thedescription of the protocol
is given.
- Type of paper
: Paper in proceedings
Title: Synchronization in Distributed Discrete-Event Simulation
of Real-Time Systems
- Authors:
- Sruk, Vlado (162862)
- Editors
- Srb, Neven
Proceedings title: Zbornik 3. SONT; 04 Računarstvo, telekomunikacije i informatika
Language: engleski
Place: Opatija
Year: 1991
ISBN/ISSN: 86-81997-03-3
Pages: from 72 to 75
Meeting: 3. Međunarodni simpozij o novim tehnologijama
Held: from 10/15/91 to 10/17/91
Summary: Simulation of complex real-time systems usually requires a
lot of
processing time. Taking into account the inherent parallelism in
real-time system it is possible to speed up simulation usingsmall
computers equipped with high-speed networks. The real-time
requirements imply that the simulated processes have tosynchronize
with simulated real-time clock signals, and parallel execution of
simulated events, which speeds up overall simulation, raise
synchronization problems among parallel processes. Two basic
methods for avoiding synchronization problems are described.
Keywords: discrete-event simulation, real-time systems
- Type of paper
: Paper in proceedings
Title: Design Methodology for Embedded Computer Systems in Ada
Style
- Authors:
- Sruk, Vlado (162862)
Proceedings title: Zbornik: MTS - Mikroračunala u tehničkim sustavima, MIPRO '92
Language: engleski
Place: Rijeka
Year: 1992
Pages: from 109 to 114
Meeting: MIPRO '92
Held: from 05/18/92 to 05/21/92
Summary: Software development for embedded computer systems is
strongly
influenced by the chosen methodology, and the productivedeveloping
environment. Ada programming language concepts aresuitable for efficient
system design including programspecification, module developing, reviewing,
system integrationand maintenance. This article describes the design
methodologybased on these concepts.
Keywords: design methodology, ADA programming language, embedded systems
- Type of paper
: Paper in proceedings
Title: Data Replication Coherence Protocols Simulation Environmet
- Authors:
- Sruk, Vlado (162862)
- Srbljić, Siniša (120804)
- Editors
- Čerić, Vlatko
- Hljuz Dobrić, Vesna
Proceedings title: Proceedings of the 14th Int. Conference on Information Technology Interfaces
Language: engleski
Place: Pula
Year: 1992
Pages: from 409 to 413
Meeting: ITI '92 - 14th International Conference on Information Technology Interfaces
Held: from 09/15/92 to 09/18/92
Summary: A discrete event simulation environment for simulation of
data
replication coherence protocols, that takes advantage of the
concurrent programming facility provided by the Ada programming
language, is presented. A distributed implementation is suggested
and some problems concerning concurrent programming arediscussed.
Keywords: data replication, coherence protocols, distributed simulation
- Type of paper
: Paper in proceedings
Title: Comparison of Data Replication Coherence Protocols for
Distributed Systems
- Authors:
- Sruk, Vlado (162862)
- Srbljić, Siniša (120804)
Proceedings title: Proceedings of the 15th Int. Conference on Information Technology Interfaces
Language: engleski
Place: Pula
Year: 1993
ISBN/ISSN: 1330-1012
Pages: from 295 to 302
Meeting: ITI '93 - 15th International Conference on Information Technology Interfaces
Held: from 06/15/93 to 06/18/93
Summary: In this work we compare several coherence protocols
formaintaining data consistency in distributed computer systems bymeans of
simulation. Two parameters are taken as a performancemeasure: average
communication cost per operation in thedistributed system and a hit ratio
of successfully performedlocal operation. The simulation model is
described, and resultsfrom this model are presented and compared to
existing analyticalsolutions for homogenous workload. Also, we
discussinfluence of the memory constraints on the efficiency of acoherence
protocol. The performance distinctions signifyimportance of choosing
appropriate coherence protocol forexpected workload.
Keywords: data replication, coherence protocols, simulation
- Type of paper
: Paper in proceedings
Title: Dynamic Algebras as a Formalism for Description of
Processor Architectures
- Authors:
- Glavinić, Vlado
- Editors
- Ribarić, Slobodan
- Čišić, Dragan
- Griparić, Branko
- Novak, Jadranko
Proceedings title: Zbornik: MIS - Mikroračunala u inteligentnim informacijskim sustavima, MIPRO '92
Language: engleski
Place: Rijeka
Year: 1992
ISBN/ISSN: 86-385-0115-3
Pages: from 103 to 109
Meeting: MIPRO '92
Held: from 05/18/92 to 05/21/92
Summary: Although formal methods are nowadays quite present in
thehardware domain, an adequate formalism allowing for a layeredsystem
architecture definition has yet to be worked out. Oneformalism from the
domain of operational specifications seems tobe quite applicable for this
task. Dynamic algebras allow for aunified description context in which
abstraction tuning by
introducing new detail in a stepwise manner can be performed. Inthe paper
the expressing power of evolving algebras in processorarchitectural
specification is illustrated by outlining someissues in formally describing
a symbolic processor.
Keywords: operational specification, dynamic (evolving) algebras, abstraction tuning, processor architectural specification
- Type of paper
: Paper in proceedings
Title: An Approach to Distributed Application Definition by
Remote Operation Invocation
- Authors:
- Glavinić, Vlado
- Sandri, Roberto
- Editors
- Čerić, Vlatko
- Hljuz Dobrić, Vesna
Proceedings title: Proceedings of the 14th International Conference on Information Technology Int.
Language: engleski
Place: Pula
Year: 1992
Pages: from 243 to 248
Meeting: ITI '92 - 14th International Conference on Information Technology Interfaces
Held: from 09/15/92 to 09/18/92
Summary: Remote Operations is a concept devised to support the
developmentof distributed applications requiring interactive
communication.The paradigm it introduces as well as the implications of
usingit are discussed in this paper, and illustrated by specifying asimple
character-based dialogue system. This system is describedin the pertinent
RO notation, implemented within
the ISODE system, and being verified on a LAN.
Keywords: distributed applications, ISODE, OSI, remote operations
- Type of paper
: Paper in proceedings
Title: Using Formalisms for Concurent Process Description in
Functional Description of Digital Systems
- Authors:
- Bosnar, Darko
- Žilić, Ž.
Proceedings title: Zbornik radova: XXXV jugoslavenska konferencija ETAN-a
Language: hrvatski
Place: Ohrid, Makedonija
Year: 1991
ISBN/ISSN: 86-80509-03-5
Pages: from 99 to 106
Meeting: XXXV jugoslavenska konferencija ETAN-a
Held: from 06/03/91 to 06/07/91
Summary: The language for digital systems description is given.
Proposedlanguage is based on concurrent processes description formalism.An
illustrating example shows the properties of the language.
- Type of paper
: Paper in proceedings
Title: Control Unit Design Concepts Relating Machine Tool
Performance Demands
- Authors:
- Radej, Joško (39562)
- Srbljić, Siniša (120804)
- Editors
- Srb, Neven
Proceedings title: Zbornik radova: 03, 3. međunarodni simpozij o novim tehnologijama
Language: engleski
Place: Opatija
Year: 1991
ISBN/ISSN: 86-81997-02-5
Pages: from 74 to 78
Meeting: 3. Međunarodni simpozij o novim tehnologijama
Held: from 10/15/91 to 10/17/91
Summary: Machine tool functionality and production
characteristicsnowadays mainly depend on the computer control
systemperformances. The demands strive towards the increase ofmachining
speed, precision and part shape complexity. Besides theman-machine
interface which strongly tends to the user friendlyrelationship by the
implementation of computer graphics methodsand softkeys, the machine
operation becomes even more attendanceindependent. This is achieved through
the data communicationfacilities and dedicates computer network protocols.
The fultimeof all these complex machine requirement results in the
specificcontrol unot software and hardware architecture. Some
advancedfeature of the control system and global structure of the
modularsystem architecture are described.
- Type of paper
: Paper in proceedings
Title: Reduction of Network Traffic in Flexible Manufacturing
Systems
- Authors:
- Srbljić, Siniša (120804)
- Budin, Leo
- Editors
- Srb, Neven
Proceedings title: Zbornik radova: 04 Računarstvo, telekomunikacije i informatika, 3. SONT
Language: engleski
Place: Opatija
Year: 1991
ISBN/ISSN: 86-81997-03-3
Pages: from 66 to 71
Meeting: 3. Međunarodni simpozij o novim tehnologijama
Held: from 10/15/91 to 10/17/91
Summary: A control system for flexible manufacturing systems (FMS)
is adistributed real-time system which is data intensive. The nodesof the
distributed process-control system interchange two typesof items: data and
process-control programs. Two mechanisms areintroduced to reduce the
network traffic: data replication anddynamic interpretation of the
process-control programs. For thepurpose of the efficient application of
the given mechanisms,additional problems must be resolved: consistency of
thereplicated data structure and architecture of the dynamicinterpreter
must be adopted to real-time environment.
- Type of paper
: Paper in proceedings
Title: Digital Control of Arc Furnace Operation
- Authors:
- Ilić, Dubravka
- Editors
- Srb, Neven
Proceedings title: Zbornik radova: 04 Računarstvo, telekomunikacije i informatika, 3. SONT
Language: engleski
Place: Opatija
Year: 1991
Pages: from 0 to 0
Meeting: 3. Međunarodni simpozij o novim tehnologijama
Held: from 10/15/91 to 10/17/91
- Type of paper
: Paper in proceedings
Title: Digital Control Model for an Arc Furnace Electrode
Movement
- Authors:
- Ilić, Dubravka
- Editors
- Kecman, Vojislav
Proceedings title: Zbornik radova: 37. Međunarodni godišnji skup KoREMA
Language: hrvatski
Place: Zagreb
Year: 1992
ISBN/ISSN: 86-81571-11-7
Pages: from 140 to 143
Meeting: 37. Međunarodni godišnji skup KoREMA
Held: from 04/26/92 to 04/29/92
Summary: To obtain an economicaly profitable product of the
demandedquality with minimum expense of the raw material and
energyconsumption in an arc furnace, it is necessary to have
reliableregulating system to regulate an arc impedance. Includeing
thecomputer in an arc furnace operation it has to take over the roleof an
analog regulator enabling much simpler and reliablecontrol. To exchange an
analog regulating system with digital itis necessary to create digital
control model for an arc furnaceelectrode movement that is presented in
this paper.
- Type of paper
: Paper in proceedings
Title: Task Synchronization in the Network Oriented Real Time
Operating Systems for the Personal Computers
- Authors:
- Delija, D.
- Editors
- Kecman, Vojislav
Proceedings title: Zbornik radova: 37. Međunarodni godišnji skup KoREMA
Language: engleski
Place: Zagreb
Year: 1992
ISBN/ISSN: 86-81571-11-7
Pages: from 225 to 228
Meeting: 37. Međunarodni godišnji skup KoREMA
Held: from 04/26/92 to 04/29/92
Summary: In this article the problems related with the
tasksynchronization and the task communication among tasks on thereal time
multiuser multitasking operating system for personalcomputers are described
together with the concept of thedistributed application. The situations
connected with singlecomputer systems and with network systems are
considered. Theconcept of the logical bus of the computer conection is
describedtogether with the demands for the network and for the
operatingsystem caused by the logical bus concept and by the data flowmodel
of the distributed application. As an example, some hintsfrom the QNX
operating system are described.
- Type of paper
: Paper in proceedings
Title: Functional Approach in Evaluation of the Machine Tool
Computer Systems
- Authors:
- Budin, Leo
- Peruško, Uroš
- Radej, Joško (39562)
- Srbljić, Siniša (120804)
- Editors
- Crnošija, Petar
Proceedings title: Zbornik radova: 37. Međunarodni godišnji skup KoREMA
Language: engleski
Place: Zagreb
Year: 1992
ISBN/ISSN: 86-81571-11-7
Pages: from 618 to 621
Meeting: 37. Međunarodni godišnji skup KoREMA
Held: from 04/26/92 to 04/29/92
Summary: Throughout their modular architecture design, modern
machine toolcomputer control system demonstrate the implementation of the
newmicrocomputer technologies and techniques. Their modulararchitectures
based on the functional approach do not accommodatethem only to the various
types of machine tools, but also greatlyinfluences upon their rational
employment in a given productionprocess. Some important control systems
properties and theirfunctional depedence on machine tool configuration,
productionprocess and application method, as a criterion for control
systemselection are discussed.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Ilić, Dubravka
- Editors
- Boršić, Mladen
- Mahović, Sanjin
Proceedings title: Zbornik radova: 38. Međunarodni godišnji skup KoREMA
Language: hrvatski
Place: Zagreb
Year: 1993
ISBN/ISSN: 953-6037-00-9
Pages: from 499 to 502
Meeting: 38. Međunarodni godišnji skup KoREMA
Held: from 04/26/93 to 04/28/93
Summary: To realize an economical manufacture of products of
thedemanded quality in the Arc Furnace it is necessary to ensurereliable
regulating system. This work comprises the fundamentalanalyze of a digital
regulating system. The model of digitalregulator has been defined and
realized. To point out thedifferences, the comparison between an analog and
digitalregulator of an electrode movement has been made.
- Type of paper
: Paper in proceedings
Title: Memory Management for Hard Real Time Operating System
(HRTOS)
- Authors:
- Peruško, Uroš
- Rački, Relja
- Editors
- Budin, Leo
Proceedings title: Zbornik: MTS - Mikroračunala u tehničkim sustavima, MIPRO '93
Language: hrvatski
Place: Rijeka
Year: 1993
ISBN/ISSN: 953-6042-01-0
Pages: from 58 to 63
Meeting: MIPRO '93
Held: from 05/24/93 to 05/27/93
Summary: In this paper Memory management system for Hard Real
TimeOperating System (HRTOS) is described. In order to ensureprotection of
single memory page the memory management unit (MMU)is used. Predictability
of data access is enabled usig memoryorganization model which excludes
prepaging. Because HRTOS kernelis designed for use in embeded systems, the
size of tasks areknown apriory and therefore exact number of pages for
eachprocess can be easily determined. Kernel memory pages and alltasks'
pages are placed within RAM memory space, determinatingmemory translation
tables before the begining of execution.
- Type of paper
: Paper in proceedings
Title: An Aproach in Machine Tool Simulation
- Authors:
- Radej, Joško (39562)
- Peruško, Uroš
- Budin, Leo
- Editors
- Čerić, Vlatko
- Hljuz Dobrić, Vesna
Proceedings title: Proceedings of the 15th International Conference on Information Technology Int.
Language: engleski
Place: Pula
Year: 1993
ISBN/ISSN: 1330-1012
Pages: from 275 to 280
Meeting: ITI '93 - 15th International Conference on Information Technology Interfaces
Held: from 06/15/93 to 06/18/93
Summary: Numerically controled machine tools represent a functional
unionof the two essential parts: computer control system andmechanical
machine structure. Electro-mechanical convertorsinterfaces both parts by
exhibiting some specificcharacteristics. Machine tool simulator should
replace themechanical part in a given range of the required
functionalcharacteristics. This must be provided in such way that
controlsystem will not sense the change of the environment behaviour.
Inthis respect, simulator can be used as convenient measuringsystem of the
control parameters and as realistic interpreter ofthe machining process.
Simulation method and possible designprinciples are presented.
Keywords: computer control system, numerically controlled machine tool, position control
- Type of paper
: Paper in proceedings
Title: Field Busses - An Alternative for Networking of Process
Peripherals within CIM
- Authors:
- Glavinić, Vlado
- Editors
- Cebalo, Roko
Proceedings title: Zbornik radova: CIM '93 - 2. medjunarodno savjetovanje proizvodnoga strojarstva
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from 43 to 52
Meeting: CIM '93 - 2. medjunarodno savjetovanje proizvodnoga strojarstva
Held: from 11/18/93 to 11/18/93
Summary: This paper provides a short tutorial overview upon field
busses -a particular type of manufacturing local networks used in thelowest
layer of factory automation, for process peripheralsinterconnection. After
some introductory definitions, the fieldbusses domain is described, within
the broader area ofcommunications for manufacturing, as well as the
characteristicthree-layer architecture. The properties of these layers
arecommented in the following. The paper also comments on
thestandardization efforts.
Keywords: field busses, three-layer architecture, CIM
- Type of paper
: Paper in proceedings
Title: Development of a Distributed Application within MAP
Functional Profile
- Authors:
- Glavinić, Vlado
- Stojanović, Milan
- Editors
- Cebalo, Roko
Proceedings title: Zbornik radova: CIM '93 - 2. medjunarodno savjetovanje proizvodnoga strojarstva
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from 53 to 61
Meeting: CIM '93 - 2. medjunarodno savjetovanje proizvodnoga strojarstva
Held: from 11/18/93 to 11/18/93
Summary: The implementation of uniform communication within
themanufacturing environment is enabled by the functional profileMAP/TOP.
The functionality of the MAP application layer isdefined by the
Manufacturing Message Specification (MMS). Themodel upon which the MMS
standard is based, and its relevantcharacteristics, are described in this
paper. The modeling of asimplified manufacturing service in terms of MMS is
shown, aswell as the development of the respective implementation.
Keywords: manufacturing environment, distributed application development, MMS
- Type of paper
: Paper in proceedings
Title: An Overview of the NUMAchine Multiprocessor Project
- Authors:
- Abdelrahman, T.
- Brown, S.
- Mowry, T.
- Sevcik, K.
- Stumm, M.
- Vranešić, Zvonko
- Srbljić, Siniša (120804)
- Žilić, Ž.
- Pereira, P.
- Elkateeb, A.
- Editors
- West, Edmund
Proceedings title: Proceedings of the Supercomputing Symposium '94
Language: engleski
Place: Toronto, Kanada
Year: 1994
ISBN/ISSN: 0-7727-9000-0
Pages: from 283 to 295
Meeting: Canada's 8th Annual Int. High Performance Computing Conference
Held: from 06/06/94 to 06/08/94
Summary: The NUMAchine multiprocess or project is a large research
effort at the University of Toronto aimed to investigate and develop novel
software techniques to support efficient parallel computing. An integral
part of the project is to design and built the NUMAChine multiprocessor - a
large-scale, cache-coherent, non uniform memory access (NUMA), shared
memory multiprocessor.
The NUMAchine has a umber of hardware innovations designed to facilitate
our software techniques. This integrated hardware-software approach is the
major theme of the project. In this paper we will present an overview of
the NUMAchine project, and will describe the NUMAchine multiprocessor
architecture.
In particular, we will describe the unique features of the architecture:
network caches, cache-coherence protocol, support for the block transfer,
monitoring capabilities, and the FPGA-based flexible hardware control. Our
software techniques will be address fundamental issues in software support
for
multiprocessors in the areas of operating systems, compilers, and run-time
support. We will describe our research and progress in each area.
- Type of paper
: Paper in proceedings
Title: Performance Prediction for Different Consistency Schemes
in Distributed Shared Memory Systems
- Authors:
- Srbljić, Siniša (120804)
- Vranešić, Zvonko
- Budin, Leo
- Editors
- Fox, Geoffrey
Proceedings title: Proceedings oh the 3rd IEEE Int. Symposium on High-Performance Distr. Computing
Language: engleski
Place: San Francisco, USA
Year: 1994
ISBN/ISSN: 0-8186-6395-2
Pages: from 295 to 302
Meeting: 3rd IEEE Int. Symposium on High-Performance Distributed Computing
Held: from 08/03/94 to 08/05/94
Summary: A model for predicting relative performance in distributed
shared memory systems is presented. The model is intended for use with
systems that feature adaptive consistency schemes. Based on estimated
read/write access patterns, the model determines the average steady-state
communication costs in the system, which serve as a performance indicator.
The model is applied to data items which may be either compact data objects
or objects consisting of smaller data elements. It is shown that the best
results are attained when protocol selection is done at the level of data
elements.
- Type of paper
: Paper in proceedings
Title: Visualization of the Data Set in Medicine and Engineering
- Authors:
- Mihajlović, Željka
- Mihajlović, S.
- Editors
- Budin, Leo
Proceedings title: MTS-Mikroračunala u tehničkim sustavima
Language: hrvatski
Place: Rijeka
Year: 1995
ISBN/ISSN: 953-6042-13-4
Pages: from 2.106 to 2.111
Meeting: MIPRO '95
Held: from 05/22/95 to 05/26/95
Keywords: computer graphics, curves
- Type of paper
: Paper in proceedings
Title: Analyse of the B-Curves for some Test Functions
- Authors:
- Gambin, Dejan
- Mihajlović, Željka
- Editors
- Budin, Leo
Proceedings title: MTS - Mikroračunala u tehničkim sustavima
Language: hrvatski
Place: Rijeka
Year: 1995
ISBN/ISSN: 953-6042-13-4
Pages: from 2.118 to 2.123
Meeting: MIPRO '95
Held: from 05/22/95 to 05/26/95
Summary: In this paper B-elastic curves are presented. The test
functions are used for considering a curve and comparing with B-elastic
curve achieved by adequate data set. Influences of the end conditions are
also discussed, and the results are presented graphically and in the tables
for three test curves.
Keywords: computer graphics, curves
- Type of paper
: Paper in proceedings
Title: Interactive Graphic User Interface for creating Surfaces
- Authors:
- Filipčić, Damir
- Mihajlović, Željka
Proceedings title: Zbornik radova 40. jubilarnog godišnjeg skupa KoREMA
Language: hrvatski
Place: Zagreb
Year: 1995
ISBN/ISSN: 953-6037-08-4
Pages: from 168 to 171
Meeting: 40. jubilarni godišnji skup KoREMA
Held: from 04/19/95 to 04/21/95
- Type of paper
: Paper in proceedings
Title: Experience with ISODE Software Package
- Authors:
- Omrčen-Čeko, Goran
Proceedings title: Zbornik radova 40. jubilarnog godišnjeg skupa KoREMA
Language: hrvatski
Place: Zagreb
Year: 1995
ISBN/ISSN: 953-6037-08-4
Pages: from 139 to 141
Meeting: 40. jubilarni godišnji skup KoREMA
Held: from 04/19/95 to 04/21/95
Summary: ISODE (ISO Development Environment) is a software
environment implememted on the Internet protocol suite (TCP/IP) for
applications development using services from upper layers of OSI Refernce
Model. Thanks to its structure and consistency ISODE provides an excellent
view into OSI upper layer services available to the distributed application
programmer. In this paper results in developing interactive distributed
applications according to international standards is described. Application
layer services for association conotrl (ACSE), reliable transfer (RTSE) and
remote operations (ROSE) are proven to be extremely useful for the
application programmer.
- Type of paper
: Paper in proceedings
Title: Applicability of Fault Tolerant System Design Techniques
- Authors:
- Cvjetko, Miljenko
- Sruk, Vlado (162862)
- Lukša, Darko
- Editors
- Budin, Leo
Proceedings title: MTS - Mikroračunala u tehničkim sustavima
Language: hrvatski
Place: Rijeka
Year: 1995
ISBN/ISSN: 953-6042-13-4
Pages: from 2.67 to 2.72
Meeting: MIPRO '95
Held: from 05/22/95 to 05/26/95
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Budin, Leo
- Editors
- Kljajić, J.
- Budin, Leo
Proceedings title: Zbornik radova seminara: Procesna informatika u Hrvatskoj elektroprivredi
Language: hrvatski
Place: Rijeka
Year: 1993
ISBN/ISSN: 953-6042-04-5
Pages: from 6-1 to 6-9
Meeting: MIPRO '93
Held: from 05/24/93 to 05/27/93
- Type of paper
: Paper in proceedings
Title: On Semantics Representation of LOTOS Programs
- Authors:
- Motik, Boris
- Glavinić, Vlado
- Editors
- Hljuz Dobrić, Vesna
- Kalpić, Damir
Proceedings title: Proc. 17th Int. Conference on Information Technology Interfaces - ITI '95
Language: engleski
Place: Pula
Year: 1995
Pages: from 217 to 224
Meeting: ITI '95 - 17th Int. Conference on Information Technology Interfaces
Held: from 06/13/95 to 06/16/95
Summary: LOTOS, ISO's standardized language originating from CCS and
CSP formalisms, has been designed as an aid in specifying behaviour and
especially temporal dependencies of distributed
systems. Because of LOTOS' rich semantics considerable problems are met
when trying to automate transformations of LOTOS specifications into
runnable implementations in some
production level language. As a first step to the solution of these
problems, a model for the analysis of LOTOS behaviour expressions is
proposed in the paper. It is intended to provide an interface to subsequent
processing such as simulating a specification, transforming it into a
labeled transition
system or testing of equality of two specifications with an adopted
definition of equivalence. We shall restrict our problem to Basic LOTOS
specifying only temporal dependencies while ADT specifications shall not be
considered.
Keywords: specification semantics, LOTOS, behaviour expressions
- Type of paper
: Paper in proceedings
Title: MMS Based Remote Control of a Robot Arm
- Authors:
- Glavinić, Vlado
- Motik, Boris
- Editors
- Cebalo, Roko
Proceedings title: Zbornik 3. međunardnog savjetovanja proizvodnog strojarstva CIM '95
Language: engleski
Place: Zagreb
Year: 1995
Meeting: CIM '95 - 3. međunarodno savjetovanje proizvodnog strojarstva
Held: from 11/09/95 to 11/10/95
Summary: As the application of computer controlled manufacturing
devices started to show its advantages in manufacturing procresses all over
the world, the problem of their remote monitoring and control emerged. The
increasing complexity of production processes and the need for the optimal
use of manufacturing equipment demanded that a way of data and command
interchange among devices in a production plant be devised. In 1990 ISO
proposed a solution to that problem by releasing the Manufacturing Message
Specification (MMS) defining
an appropriate Application Service Element that models all necessary
entities used to control a manufacturing device through a computer network.
An implementation of a remote control for a robot arm based on MMS is
described in this paper.
Keywords: MMS, robot control, manufacturing networks, client-server architecture
- Type of paper
: Paper in proceedings
Title: Architecture for a PROFIBUS Controller
- Authors:
- Glavinić, Vlado
- Salamunić-Car, G.
- Editors
- Balestrin, P.
Proceedings title: Proc. of the 5th International Symposium on New Technoligies
Language: engleski
Place: Poreč
Year: 1995
ISBN/ISSN: 953-6228-00-9
Pages: from 210 to 215
Meeting: 5th International Symposium on New Technologies - SONT
Held: from 09/25/95 to 09/27/95
Summary: Field busses are presently the subject of growing interest
because of the widespread use of digital techniques in areas like
manufacturing automation, process and drive control, which implies an
adequate interconnection mechanism. One of the most popular field busses
currently is the German standard PROFIBUS. An architecture for a universal
PROFIBUS controller is described in this paper, with the emphasis on
attaining balance between convenient dynamic behaviour and economical
implementation.
Keywords: field buses, PROFIBUS, controller architecture
- Type of paper
: Paper in proceedings
Title: Implications for Networked Multimedia in Adminstrative
Workflow
- Authors:
- Vuković, Dragutin
- Glavinić, Vlado
- Editors
- Balestrin, P.
Proceedings title: Proc. of the 5th International Symposium on New Technologies
Language: engleski
Place: Poreč
Year: 1995
ISBN/ISSN: 953-6228-00-9
Pages: from 242 to 245
Meeting: 5th International Symposium on New Technologies - SONT
Held: from 09/25/95 to 09/27/95
Summary: This paper gives an overview of contemporary concepts for
increasing the efficiency of working environments, generally covered by the
term "workflow". Special attention is paid to administrative environments,
ranging from corporate to government administration. Multimedia
applications, such as telepresence and videoconferencing, telecooperation,
computer telephony et., are implying new demands on networking
infrastructure. These implications are the main issues in this paper.
Keywords: workflow, multimedia, seams in workspace, networking
- Type of paper
: Paper in proceedings
Title: Thge Role of Information Technology in Organization
Reengineering
- Authors:
- Budin, Leo
- Editors
- Srb, Neven
Proceedings title: Proc. of the 5th Internationa Simposium on New Technologies
Language: engleski
Place: Poreč
Year: 1995
ISBN/ISSN: 953-6228-00-9
Pages: from 207 to 209
Meeting: 5th International Symposium on New Technologies - SONT
Held: from 09/25/95 to 09/27/95
Summary: The growing use of information technology provides an
extending range of strategic and organizational options for reshaping both
the small businesses and large enterprises. The business reengineering is a
process of fundamental rethinking and radical redesign of organizational
structure and management systems in order to achieve dramatic improvement
of performance. In this paper some of the reengineering options, questions,
and dilemmas are described and discussed.
Keywords: business reengineering, value chain, value system
- Type of paper
: Paper in proceedings
Title: Intergraph Electronics Design Environment in University
Laboratory
- Authors:
- Sruk, Vlado (162862)
- Peruško, Uroš
- Editors
- Srb, Neven
Proceedings title: Proc. of the 5th International Simposium on New Technologies
Language: engleski
Place: Poreč
Year: 1995
ISBN/ISSN: 953-6228-00-9
Pages: from 227 to 229
Meeting: 5th International Symposium on New Technologies - SONT
Held: from 09/25/95 to 09/27/95
- Type of paper
: Paper in proceedings
Title: State of the Art and the Future of Real-Time Computing
- Authors:
- Budin, Leo
Proceedings title: Zbornik radova 39. godišnji skup KoREMA
Language: hrvatski
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-6037-02-5
Pages: from 1 to 6
Meeting: 39. godišnji skup KoREMA
Held: from 04/25/94 to 04/27/94
Summary: Real-time computer systems must perform their functions
within prescribed strict time constraints. These systems are genrally
characterized by complex interaction with the environment. Real-time
systems are increasingly being used in different applications fields. Many
of them are parts of safety-critical systems and have to operate very
reliably. Therefore, the major concern of the future real-time systems will
be the formal approach to the specification, verification, design and
validation of systems.
- Type of paper
: Paper in proceedings
Title: Education in Engineering and Technology
- Authors:
- Budin, Leo
Proceedings title: zbornik radova 39. godišnji skup KoREMA
Language: hrvatski
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-6037-02-5
Pages: from 495 to 499
Meeting: 39. godišnji skup KoREMA
Held: from 04/25/94 to 04/27/94
Summary: This paper is an excerpt form a broader one, dealing with
the new curriculum vitae at the Faculty of Electrical Engineering in
Zagreb. The paper outlines the general concerns related to the educational
aspects in all fields of engineering and technology.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Budin, Leo
- Editors
- Muljević, Vladimir
Proceedings title: Razvitak i dostignuća tehničkih područja u Hrvatskoj
Language: hrvatski
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-6002-01-9
Pages: from 325 to 331
Meeting: Znanstveni skup: Razvitak i dostignuća tehničkih područja u Hrvatskoj
Held: from 09/23/94 to 09/23/94
Summary: The paper outlines the general concerns related to the role
of engineering in contemporary life. These thoughts influence the
educational policy in all fields of engineering and technology and they
should be considered at the new university curricula's design.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Budin, Leo
- Editors
- Petak, Antun
Proceedings title: Zbornika radova: Aktivnosti mladeži u znanosti i tehnici
Language: hrvatski
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-6091-09-7
Pages: from 136 to 149
Meeting: Okrugli stol "Budućnost izvanškolskih i izvannastavnih znanstvenih i tehničkih aktivnosti mladeži"
Held: from 06/25/94 to 06/25/94
Summary: The paper outlines the general concerns related to the role
of engineering and technology in contemporary living. these thoughts
influence the educational policy in all fields of engineering and
technology and they should be considered at the new university curricula's
design.
- Type of paper
: Paper in proceedings
Title: The Role of Standardization in Information Technology
- Authors:
- Budin, Leo
- Editors
- Ružić, Nikola
- Begušić, Dinko
- Pavelin, Ivan
Proceedings title: Conference on Software in Telecommunications and Computer Networks
Language: hrvatski
Place: Split
Year: 1995
ISBN/ISSN: 953-6114-07-0
Pages: from 43 to 54
Meeting: SoftCOM '95 - Conference on Software in Telecommunications and Computer Networks
Held: from 06/14/95 to 06/15/95
Summary: This survey presents the standardization activities in the
fields of computer technologies, in the last years known under the unifying
name information technology (IT). It points out today's technological
possibilities and the importance of standardization on all implementation
levels. the open systems concept, which is expected to enable a gradual and
natural growth of computer systems, is emphasized.
Keywords: standardization, open systems
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Budin, Leo
- Editors
- Perić, Nedjeljko
Proceedings title: Nastava i organizacija nastave na tehničkim visokim učilištima
Language: hrvatski
Place: Zagreb
Year: 1994
Pages: from 20 to 35
Meeting: Okrugli stol: "Nastava i organizacija nastave na tehničkim visokim učilištima"
Held: from 02/16/94 to 02/16/94
- Type of paper
: Paper in proceedings
Title: Multimedia Communications
- Authors:
- Zovko-Cihlar, Branka
- Bauer, S.
- Cihlar, Darin
- Editors
- Skala, Karolj
Proceedings title: Zbornik radova seminara Multimedijalna primjena računala MPR
Language: hrvatski
Place: Opatija
Year: 1994
ISBN/ISSN: 953-6042-04-5
Pages: from 2.39 to 2.74
Meeting: MIPRO '94
Held: from 05/23/94 to 05/26/94
- Type of paper
: Paper in proceedings
Title: Video Compression Techniques for Multimedia Applications
- Authors:
- Zovko-Cihlar, Branka
- Bauer, S.
- Modrić, D.
- Cihlar, Darin
- Editors
- Skala, Karolj
Proceedings title: Proc. of Multimedia and Hypermedia Systems
Language: engleski
Place: Opatija
Year: 1995
ISBN/ISSN: 953-6042-10-X
Pages: from 64 to 70
Meeting: MIPRO '95
Held: from 05/22/95 to 05/26/95
- Type of paper
: Paper in proceedings
Title: MPEG Video Source in Multimedia Environment
- Authors:
- Bauer, S.
- Zovko-Cihlar, Branka
- Cihlar, Darin
- Editors
- Radanović, Božidar
Proceedings title: Proc. of the 37th Int. Symposium Electronics in Marine
Language: engleski
Place: Pula
Year: 1995
ISBN/ISSN: 953-96030-1-3
Pages: from 87 to 92
Meeting: ELMAR '95
Held: from 09/18/95 to 09/20/95
- Type of paper
: Paper in proceedings
Title: Video Signal in Multimedia Communications
- Authors:
- Zovko-Cihlar, Branka
- Bauer, S.
- Cihlar, Darin
- Modrić, D.
- Editors
- Balestrin, P.
Proceedings title: Proc. of the 5th Int. Symposium on New Technologies
Language: engleski
Place: Poreč
Year: 1995
ISBN/ISSN: 953-6228-00-9
Pages: from 238 to 241
Meeting: 5th International Symposium on New Technologies - SONT
Held: from 09/25/95 to 09/27/95
- Type of paper
: Ph.D.
Title: An Approach to Structured Text Processor Modeling
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Author: GLAVINIĆ VLADO
Date of defense: 04/25/91
Language: hrvatski
Number of pages: 193
Summary: An approach to modeling of the complex text processor, a
machinewhich is processing documents w.r.t. their inherent structure,
isdescribed in this work. In modeling the hierarchicaldecomposition is used
by defining three abstraction levels: aconceptual, a specification, and an
implementation one. Theconceptual level includes the intuitive description
of theprocessor model - its data structures, and functionality.
Thespecification level works out the processor conceptualdescription using
rigorous mathematical means, while theimplementation level represents the
real implementationcorresponding to a single architecture.
The conceptual processor model is defined basing on unique
listrepresentations, and on operation classification in analogy
tooperations on abstract data types. The conceptual model isvalidated
w.r.t. six reference editors known from the literature.
A new abstract model is defined by means of algebraicallyspecified abstract
data types. The model is an editor machinewith transitions between states
being the editor operations. Themachine state is modeled by means of the
Cartesian product ofdocument structure and address. A prototype in a
functionallanguage is implemented for the model.
An original concrete model is formalized by means of dynamicalgebras. The
model is developed basing on two-dimensionaldouble-linked structures. The
basic operations are implemented byexchanging of pointers to single memory
cells storing nodedescriptors. The concrete model is verified w.r.t. the
abstractone, and two hardware implementations thereof are proposed.
- Type of paper
: Ph.D.
Title: Model of Distributed Processing in Flexible Manufacturing
Systems
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Author: SRBLJIĆ SINIŠA
Date of defense: 11/26/90
Language: hrvatski
Number of pages: 271
- Type of paper
: Ph.D.
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Author: BUNJEVAC HRVOJE
Date of defense: 06/02/95
Language: hrvatski
Number of pages: 107
- Type of paper
: M.A.
Title: Visualization of the Volumes and Isosurfaces According to
the Data Set
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Author: MIHAJLOVIĆ ŽELJKA
Date of defense: 04/29/93
Number of pages: 98
Summary: The problem of visualization of volumes and isovalue
surfacesappears in many scientific fields. An example of data set
forvisualization is a sequence of 2D slices. The most common problemis in
the visualization of isovalue surfaces, according to thatdata set. For some
purposes, the input data is acquired by somesampling methods, and for the
others, the data is analyticallygenerated. Some of these acquisition
methods like MR and CTscanning and methods that analytically generate
fractal sets areconsidered in this paper.
Several methods for visualization of volumes and isosurfaces arepresented.
Some of these methods use the geometric primitives forrendering, while the
others render the object directly upon theinput data.
The marching cube method is considered here as an example ofmethods that
render the object using geometric primitives. Theresults that are achieved
for the marching cube method and forcuberille approach are shown and
compared. To present the methodthat renders the object directly upon the
input data, an approachto the volume rendering is worked out in details. As
the volumerendering methods are very time and space consuming,
severalapproaches to achieve the compression in acquired space and timesare
also considered.
To illustrate each of the considered methods and problems thatmay appear,
the examples and results are shown on the fractalsets. Comparing the
results, the methods can be reviewed andselected for a particular purpose.
Keywords: computer graphics, isovalue surfaces, voxel, volume rendering
- Type of paper
: M.A.
Title: Coherence Protocols Simulation for Distributed Computer
Systems
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Author: SRUK VLADO
Date of defense: 11/14/91
Language: hrvatski
Number of pages: 101
Summary: The goal of this work is to provide a tool for analysis
the
performance of various coherence protocols in distributedcomputer systems.
The developed program modules provides a toolfor constructing simulations
of a various configurationscoherence protocols in arbitrary configured
distributed systems.
Since such systems are highly complex there is proposed an
methodology for developing simulation models. Parallelism, which
characterised such systems, requires a different approach to
programming simulation models. Instead of requiring the user to
learn this approach it is more practical to incorporate parallel
programming techniques into development process.
A consistent methodology has been proposed here that is
specifically tailored to Ada programming language, and can take
full advantage of Ada design features. Presented methodology
includes a systematic approach for decomposition into concurrent
processes, specification of process interactions, the use of
intermediate tasks to affect the degree of task coupling. The
essential characteristic of this methodology is integration of
tasks of modelling and simulation with design and development. By
this simulation can be conducted as an integral part of thedesign and
implementation cycle.
A number of generated messages per transaction in a systemand a ratio
of successfully performed local transaction areproposed as parameters for
coherence protocol performanceevaluation. Simulation runs for homogenous
workloads indistributed systems are compared to analytical solutions.
Thereare also given results of simulation of nonhomogenous workloadsand
simulation of system with memory constraints.
Keywords: coherence protocols, design methodology, parallel discrete-event simulation, workload model
- Type of paper
: M.A.
Title: Automatic Decomposition Methods in Electronic Circuit
Analysis
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Author: BUNJEVAC HRVOJE
Date of defense: 06/25/91
Language: hrvatski
Number of pages: 71
Summary: A decomposition of electronic circuits to loosely
coupledparts can be used to speed up analysis procedure.
From variety of decomposition techniques for circuitequations
formulation node-tearing nodal analysis is presented. Aspecific
zero-nonzero pattern of dependence matrix is obtained.
Prerequisite for node-tearing nodal analysis is decompositionof
electronic circuit.
Every decomposition has its associated permutation ofdependence matrix.
It is known that finding perfect permutationof dependence matrix is NP
complete problem. For that reason inthesis are treated heuristic algorithms
for decomposition ofelectronic circuits.
To speed up the decomposition graph representation amathematical model
of electronic circuit is used.
Two well known heuristic algorithms for node-tearing oflarge-scale
networks are described and required computationaltime is given.
New eficient heuristic algorithm for node-tearing ispresented. The
concept of choosing nodes with minimum degree incontours construction is
utilized in developing new algorithm.The required computational time is
shown to be bounded by O(mn+e)where m, n and e are maximal node degree,
number of nodes andnumber of edges of input graph, respectively.
Experimental results show that proposed algorithm prodicesnear optimal
solutions.
- Type of paper
: M.A.
Title: Digital Control of Arc Furnace Electrode Movement
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Author: ILIĆ DUBRAVKA
Date of defense: 05/05/93
Language: hrvatski
Number of pages: 73
Summary: This work comprises fundamental analyse of an Arc Furnace
plantwhat includes description of the flow of the material,information and
energy. The analyse and sintesys of the presentcontrol system (what
includes an analog arc impedance regulator)of an electrohidraulic arc
furnace that have been made is used tocreate a digital control system. The
model of the digitalregulator have been defined and realized. The created
model ofdigital regulator and digital system have been examined with
thesupport of a MATRIX, software package. To point out thediferences, the
comparison between an analog and digitalregulator of an electrode movement
have been made.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 02/25/93
Number of pages: 121
Author: Hodko Vesna
Degree level: M.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 04/26/93
Number of pages: 96
Author: Grčanac mr. elektrotehnike Tomislav
Degree level: M.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 04/01/93
Number of pages: 197
Author: Žunić Damir
Degree level: M.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 06/10/93
Number of pages: 109
Author: Hamilton Robert
Degree level: M.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 01/17/91
Number of pages: 67
Author: Kirasić Damir
Degree level: M.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 04/22/94
Number of pages: 62
Author: Delija D.
Degree level: M.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 03/07/91
Number of pages: 150
Author: Ognenovski Stevan
Degree level: M.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 04/03/94
Number of pages: 104
Author: Vrdoljak Saša Ivan
Degree level: M.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 06/29/93
Author: Bezjak Sonja
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 06/29/93
Author: Kranječec Damir
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 06/29/93
Author: Šveb Robert
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 02/09/94
Author: Crnogorac Hrvoje
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 02/09/94
Author: Helić Denis
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 04/25/95
Author: Boras Igor
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 02/25/94
Author: Medved Dražen
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 04/25/94
Author: Rubes Mlijenko Tomislav
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 04/25/94
Author: Kovačić Mladen
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 06/28/94
Author: Radičević Andrija
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 06/28/94
Author: Galić Kruno
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 06/28/94
Author: Matković Krešimir
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 06/28/94
Author: Nađ Željko
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 06/28/94
Author: Zeljko Robert
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 06/28/94
Author: Bohinc Darko
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 11/09/94
Author: Stipetić Hrvoje
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 11/09/94
Author: Filipčić Damir
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 12/14/94
Author: Gološ Amrita
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 12/14/94
Author: Mustapić Goran
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 12/14/94
Author: Gambin Dejan
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 12/14/94
Author: Colnago Bojan
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 12/14/94
Author: Juratović Saša
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 12/14/94
Author: Mičuda Zoran
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 12/14/94
Author: Henc Jasminka
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 02/01/95
Author: Ružić Rolando
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 02/01/95
Author: Javorski Danijel
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 02/01/95
Author: Henc Jasminka
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 02/01/95
Author: Gambin Dejan
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 06/26/91
Author: Ivanković Ivan
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 06/26/91
Author: Lukinović Ivica
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 06/26/91
Author: Cervelin Hrvoje
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 06/26/91
Author: Pavić Tomislav
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 06/26/91
Author: Ćosić Domagoj
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 06/26/91
Author: Jukić Alojzije
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 11/06/91
Author: Batnožić Slaven
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 11/06/91
Author: Ajduković Ratko
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 12/09/91
Author: Devčić Robert
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 01/08/92
Author: Dupor Dražen
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 02/06/92
Author: Bradač Robert
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 02/06/92
Author: Kukurin Goran
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 04/24/92
Author: Cihlar Darin
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 04/24/92
Author: Dobrić Radovan
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 04/24/92
Author: Dragić Nikola
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 04/24/92
Author: Hrvojić Zoran
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 04/24/92
Author: Kijuk Saša
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 04/24/92
Author: Mrdeža Sanja
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 04/24/92
Author: Omrčen-Čeko dipl. ing. elektrotehnike Goran
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 06/29/92
Author: Banfić Srđan
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 06/29/92
Author: Bielen Katarina
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 06/29/92
Author: Brašnić Damir
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 06/29/92
Author: Hrustić Z.
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 06/29/92
Author: Kirchenmayer Robert
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 06/29/92
Author: Karničnik Domagoj
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 06/29/92
Author: Kukovačec Ivica
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 06/29/92
Author: Sandri Roberto
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 06/29/92
Author: Solić Dubravko
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 11/10/92
Author: Šumiga Dražen
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 11/10/92
Author: Cvijanović Goran
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 11/10/92
Author: Juranko Željka
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 11/10/92
Author: Šimek Damir
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 12/08/92
Author: Babić Siniša
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 12/08/92
Author: Lopatić Leonard
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 12/08/92
Author: Golub Marin
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 01/12/93
Author: Ilčić Vladimir
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 01/12/93
Author: Celjak Zdravko
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 02/09/93
Author: Kangrga Gordana
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 04/22/93
Author: Mustafić Nenad
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 04/22/93
Author: Poljak Joško
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 04/22/93
Author: Sokolić Darko
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 04/22/93
Author: Madecki Miroslav
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 04/22/93
Author: Harangozo Vilim
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 04/22/33
Author: Stojanović Milan
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: Elektrotehnički fakultet Sveučilište u Zagrebu
Mentor: BUDIN LEO
Date of defense: 04/22/93
Author: Antić Mladen
Degree level: D.A.
- Type of paper
: Survey/Study
Title: Computer Networks in Manufacturing Systems
- Authors:
- Glavinić, Vlado
Ordering party: Zavod za elektroniku, mikroelektroniku, računalne i inteligentne sustave, FER Zagreb
Institution depot: Zavod za elektroniku, mikroelektroniku, računalne i inteligentne sustave, FER Zagreb
Year: 1995
Number of pages: 33
Language: hrvatski
Summary: The concept of factory automation comprehends the
interconnedtion of single parts of the automated resp. computer managed
equipment, aiming to obtain their harmonious interworking that
would lead to the increase of flexibility and efficiency of manufacturing,
and ultimately of competitivity on the market of the whole entreprise.
Therefore the need arises for the design of an appropriate networking as a
support to the integration of information interchange within the
enterprise. The essential moment in networking is the hierarchical
decomposition of the enterprise computer network and its organization as an
interconnected network of single layer component networks. The architecture
of the manufacturing system internetwork is described in the paper and the
basic characteristics of solutions applicable at the single layers of the
automated factory are
given. As it is customary, the approach to internetwork and component
networks definition is based on the concept of open systems.
Keywords: factory automation, refernt architectures for manufacturing networks, LANs, field buses, communication media
- Type of paper
: Survey/Study
Title: 5105 Computer and Terminal Networks. Research in the Field
of Office Networks. Class Assignments in 1993-94.
- Authors:
- Glavinić, Vlado
Ordering party: Zavod za elektroniku, mikroelektroniku, računalne i inteligentne sustave, FER Zagreb
Institution depot: Zavod za elektroniku, mikroelektroniku, računalne i inteligentne sustave, FER Zagreb
Year: 1994
Number of pages: 206
Language: hrvatski
Summary: Office Automation (OA) encompasses methods and technologies
directed to the increase of efficiency of office work by replacing paper
documents with their electronic conterparts. Office networking represents
an important element of OA
within such a framework. Researches of some of the important aspects of
office communication support are described in this report, from hardware
level up to applications. The problems covered include connection of
asynchronous terminals to a
typical office LAN, security issues, and implementations of office
communication systems of asynchronous (E-mail) as well as synchronous
(talk) type. These works are performed with the cooperation of a group of
students of Computer Engineering program, Faculty of Electrical Engineering
in Zagreb, within the elective 5105 Computer and Terminal Networks, and
under the supervision of the report editor. The following
collaborators helped in the supervision of students' work: D.Lukša (report
No. 1), J.Poljak (reports No. 2 i 3) and G.Omrčen-Čeko(reports No. 4 i 5).
Keywords: LANs, Ethernet, terminal server, cryptography, DES algorithm, RSA algorithm, E-mail, talk systems
- Type of paper
: Technical report
Title: Models for Performance Prediction of Cache Coherence
Protocols
- Authors:
- Srbljić, Siniša (120804)
- Vranešić, Zvonko
- Stumm, M.
- Budin, Leo
Ordering party: University of Toronto
Institution depot: University of Toronto
Year: 1995
Number of pages: 50
Language: engleski
Summary: In a modern shared memory multiprocessor, it is possible to
support more than one protocol for maintaining cache coherence. Possible
candidates might be based on the Write-Back/Invalidate,
Write-Through/Invalidate, and Write-Update protocols. Hybrid protocols
allow the use of different protocols for different
data blocks, and dynamic hybrid protocols additionally allow for changes in
the choice of protocol during the execution of an application. In this
paper, we introduce a set of analytical models for predicting the
performance of parallel applications under various cache coherence protocol
assumptions. These models can be used at compile time to determine which
protocols are to be used for which data blocks, and also to determine when
to
change protocols in the case of dynamic protocols. Although we focus on
tightly-coupled multiprocessor systems, the models apply equally well to
loosely-coupled distributed systems such as networks of workstations. Our
models are unique in that they lie between a large body of theoretical
models that assume independence and a uniform distribution of memory
accesses
across processors, and a large body of address-trace oriented models that
assume the availability of a precise characterization of interleaving
behavior of memory accesses. The former are not very realistic, and the
latter are not suitable for compile-time and run-time usage. In contrast,
our models use a set
of parameters that characterize the access behavior of applications well,
and can be obtained with advanced compiler technology. We present the
models and show how the required parameters can be obtained. We assess the
accuracy of our models on 15 parallel applications and show that we can
predict performance within a 10% margin. As part of this study, we also
show the potential advantage of using dynamic hybrid protocols.
Keywords: Cache coherence, distributed shared memory, memory access behavior, analytical performance prediction, performance evaluation, dynamic hybrid protocols.
- Type of paper
: Technical report
Title: The NUMAchine Multiprocessor
- Authors:
- Vranešić, Zvonko
- Brown, S.
- Stumm, M.
- Žilić, Ž.
- Pereira, P.
- Sevcik, K.
- Elkateeb, A.
- Srbljić, Siniša (120804)
Ordering party: University of Toronto
Institution depot: University of Toronto
Year: 1995
Number of pages: 60
Language: engleski
Summary: NUMAchine is a cache-coherent shared-memory multiprocessor
designed to have high-performance, be cost effective, modular, and easy to
program for efficient parallel execution. Processors, caches, and memory
are distributed across a number of stations interconnected by a hierarchy
of unidirectional bit-parallel
rings. The simplicity of the interconnection permits the use of the wide
datapaths at each node, and novel scheme for routing packets between
stations enables high-speed operations of the rings in order to reduce
latency. The ring hierarchy provides useful features, such as efficient
multicasting and
order-preserving message transfers, which are exploited by the cache
coherence protocol, for low latency invalidation of shared data. The
hardware is designed so that cache coherence traffic is restricted to
localized sections of the machine whenever possible. NUMAchine is optimized
for applications with
good locality, and system software is designed to maximize locality.
Results from detailed behavioral simulations to evaluate architectural
tradeoffs indicate that a prototype implementation will perform well for a
variety of
parallel applications.
