- Type of paper
: Paper in book
Title:
- Authors:
- Novosel, Mladen
Publisher: Leksikografski zavod Miroslav Krleža
- Type of paper
: Paper in book
Title:
- Authors:
- Novosel, Mladen
Publisher: Školska knjiga
- Type of paper
: Paper in book
Title:
- Authors:
- Novosel, Mladen
- Krumes, Dragomir (60515)
Publisher: Strojarski fakultet, Slavonski Brod
ISBN: 953-6048-02-7
Year: 1994
Pages: from 1 to 75
Number of references: 8
Language: hrvatski
- Type of paper
: Paper in book
Title:
- Authors:
- Novosel, Mladen
- Krumes, Dragomir (60515)
Publisher: Strojarski fakultet, Slavonski Brod
ISBN: 953-6048-04-3
Year: 1994
Pages: from 1 to 274
- Type of paper
: Paper in journal
Title: Relationship of hardness impact toughness towards the
cooling time at simulation of a single pass welding
- Authors:
- Samardžić, Ivan (165270)
- Stoić, Antun
Journal: Zavarivanje
Number: 1
ISSN: 0044-1902
Volume: 33
Year: 1993
Pages: from 255 to 259
Number of references: 5
Language: hrvatski
Summary: An investigation of relationship of hardness and impact
toughnesstowards the t8/5 cooling time is described Testing has been madeon
the samples subjected to the simulation of a single passwelding on a weld
thermal cycle simulator "Smitweld TCS 1405".The t8/5 cooling time was
varied within the 4 to 52 sec.range.Based on the experimentally determined
values of hardnessand impact toughness, the HV=f(t8/5) and Kv=f(t8/5)
curves havebeen plotted.
Keywords: HSLA steel, weldability, t8/5 cooling time, hardness, impact toughness
- Type of paper
: Paper in journal
Title: Methods used for testing the susceptibility to cold
cracking
- Authors:
- Kralj, Slobodan
- Samardžić, Ivan (165270)
Journal: Zavarivanje
Number: 5
ISSN: 0044-1902
Year: 1992
Pages: from 199 to 208
Number of references: 100
Language: hrvatski
Summary: Methods used for testing the susceptibility to cold
cracking hasbeen described. The survey has been made separately
foranalytical and experimental ones. The experimental method areclassified
into three groups, i.e. welding with self-constraint,with external
constraint and simulation of the welding cycle inspecial devices. Based on
the reference search, a frequency ofuse of each method had been given.
Also, approximative costs oftesting for several method are given.
Keywords: weldability, cold cracks, testing methods, C-equivalent
- Type of paper
: Paper in journal
Title: Reliability of pressure vessels containing aggressive
media
- Authors:
- Lukačević, Zvonimir (30953)
Journal: EGE
Number: 1
ISSN: 1330-0628
Year: 1993
Pages: from 48 to 49
Language: hrvatski
Summary: Appearance of cracks on pressure vessels operating in
contactwith aggressive media has been described in literature anddiscussed
at national and international meetings already since1954. Great dangers for
people, property and bilogicalenvironment in case of failure of those
vessels call for theimposition of supplementary quality requirements at all
stages ofprocessing and utilization. A list of additional requirements
forquality assurance and reliability is shown hereinafter.
- Type of paper
: Paper in journal
Title: Repair welding of pipes and sections of power generating
equipment
- Authors:
- Lukačević, Zvonimir (30953)
- ŠKORIĆ, IVICA
Journal: Zavarivanje
Number: 3
ISSN: 0044-1902
Year: 1992
Pages: from 155 to 162
Number of references: 8
Language: hrvatski
Summary: To perform a successful repair of damaged part, it is
necessaryto locate damage, find its size and explain phenomenon resultingin
given damage. Mechanisms and causes of failures by creep inpipes and
sections of steam boilers are described. Also, methodsproviding a tool for
assessment of failure and intensity ofdamage are analyzed. Some criteria in
making a decision whetherthe damaged part should be repaired by welding or
replaced by anew one are suggested, together with procedures in repair
ofpipes and boiler sections by welding.
Keywords: creep, revitalization, steam boilers, in-service-monitoring, welding
- Type of paper
: Paper in journal
Title: From a symmetrist point of view (Algebraic systems of
symmetrist logics)
- Authors:
- Šeper, Kajetan (46444)
Journal: The journal of symbolic 57
Number: 57
Year: 1992
Pages: from 332 to 333
Language: engleski
- Type of paper
: Paper in journal
Title:
- Authors:
- Bucić, Josip (150780)
Journal: Vojnotehnički glasnik
Number: 1
ISSN: 0042-8469
Year: 1991
Pages: from 5 to 14
Language: hrvatski
- Type of paper
: Paper in journal
Title: The hypertext based reference procedure used in expert
system for life assessment of high temperature components
- Authors:
- Jovanović, Aleksandar (176700)
- De Witte, M
Journal: Nuclear Engeneering and Design
Number: 130
ISSN: 0029-5493
Year: 1991
Pages: from 0 to 0
Language: engleski
- Type of paper
: Paper in journal
Title: A large knowledge-based system project of European power
generation industry
- Authors:
- Jovanović, Aleksandar (176700)
- Maile, K.
Journal: Expert System with Application
ISSN: 0957-4174
Volume: 5
Year: 1992
Pages: from 465 to 477
Language: engleski
- Type of paper
: Paper in journal
Title: Fuzzy Logic for the Management of Uncertainty
- Authors:
- Šeper, Kajetan (46444)
Journal: Journal of Logic and Computation
Year: 1992
Pages: from 3 to 0
Language: engleski
- Type of paper
: Paper in journal
Title: Frequency Analysis of Vibrations in Light Aircrafts with
Piston Engines
- Authors:
- Hnatko, Emil (114811)
- Matejiček, Franjo
Journal: Tehnički vjesnik
Number: 3,4
ISSN: 1330-3651
Volume: 1
Year: 1994
Pages: from 3 to 15
Number of references: 6
Language: hrvatski
Summary: Values of individual parameters of vibrations inside the
light aircraft cockpit are not defined cither by ICAO (International Civil
Aviation Organisation) international standards, Anex 16 (1), or by
regulations of Republic of Croatia. In order to define the values of these
parameters, investigations, measurements and analysis have been made into
the obtained results of vibrations inside the cockpit of the Cessna 310 D,
light piston engined aircraft. Vibration parameter values have been found
for all standardized operation and flying regimes. Frequency analysis of
the vibration during these regimes been carried out. The analysis shows
that there exist recurring vibrations of such frequencies that are harmful
for the pilots life.
Keywords: Frequency analysis, vibrations, Aircraft, Pistone engine
- Type of paper
: Paper in journal
Title: Increase of System Reliability by Doubling with Renewal
- Authors:
- Perše, Dragutin (92030)
Journal: Tehnički vjesnik
Number: 1,2
ISSN: 1330-3651
Volume: 2
Year: 1995
Pages: from 33 to 39
Number of references: 7
Language: hrvatski
Summary: The paper sets out to explain the operationg system
reliability increase model by the method of doubling operating elements
with the possibility of refnewal. Particulary shown are the doubling
systems operating till the first failure, as well as doubling of multiple
use systems with one or two renewal teams. At the end table illustrated is
the relation belween particular coefficients of readiness for "cold" and
"hot" reserves.
Keywords: System reliability, Doubling, Renewal
- Type of paper
: Paper in journal
Title: Volume of Liquid in Cistern
- Authors:
- Šeper, Kajetan (46444)
- Pavić, Zlatko
Journal: Tehnički vjesnik
Number: 1,2
ISSN: 1330-3651
Volume: 2
Year: 1995
Pages: from 53 to 56
Language: hrvatski
Summary: The authors investigated a concrete practical problem
concerning the volume V(h;d,r,R) of liquid contained in a partially filled
cistern of given shape and size. The exact volume is expressed rather
simply by well-known elementary functions and the integral J(h;r,R),
besides. However, the integral is at least practically a new non-elementary
special function, therefore a numerical integration algorithm and computer
program as well are needed to obtain a practical solution Vd,r,R(h). On the
other hand, the problem can be solved empircally by means of particular
meassurefments of functionally dependent values h and v for each choice of
parameter values d,r and R separately, which is a weak side of the
experimental procedure.
Keywords: Cistern, Volume, Integration
- Type of paper
: Paper in journal
Title: A proposal of improvement in the calculation of the
contact parameters in the example of involute cogs teeth
- Authors:
- Kljajin, Milan (18862)
Journal: Tehnički vjesnik
Number: 1,2
ISSN: 1330-3651
Volume: 1
Year: 1994
Pages: from 49 to 57
Number of references: 13
Language: hrvatski
Summary: In this paper, a proposal of improvement in the calculation
of the contact parameters (Hertzian peak pressure, Hertzian half-width and
approach) is presented in the example of involute cogs teeth, which is on
the cards to substitute by circular rollers with the adequate diameters of
their bases (line contact). In this way, this contact problem is
generalized and this proposal are applicable for others round machine-parts
in Hertzian contact (such as plain journal bearings, plain and thrust
rolling bearings with rolling corpuscles formed as circular rollers etc.).
The axes of the aforesaid circular rollers can be parallel or unparallel.
Keywords: Hertzian contac, Contact parameters, linvolute cogs teeth
- Type of paper
: Paper in journal
Title: Certification in Quality Assurance
- Authors:
- Lukačević, Zvonimir (30953)
Journal: EGE
Number: 7
ISSN: 1330-0628
Volume: 2
Year: 1994
Pages: from 28 to 29
Language: hrvatski
Summary: This paper covers some actual data in the field of QA
certification: training, auditing, consultant services and accreditation
for certification. There is a strong interest in quality improvment world
wide, thet may be expressed in number of certificates for compliance with
ISO 9000 standards series: 2000 in UK and only 3 in Croatia. How to improve
the pressent situation in Croatia?
- Type of paper
: Paper in journal
Title: Quality assurance of the power plants
- Authors:
- Lukačević, Zvonimir (30953)
Journal: Zavarivanje
Number: 5/6
ISSN: 0044-1902
Volume: 37
Year: 1994
Pages: from 145 to 155
Number of references: 18
Language: hrvatski
Summary: Quality assurance system during construction and service
life of power plants has now been implemented in compliance with the ISO
9000 standards series. The exception are national and international codes
for nuclear power plant components. Regarding the possible heavy
consequences in case of power plant failures, the base for establishment of
quality assurance requirements has to be required reliability of the power
plant. Common modes and causes of failures (creep with fatigue and
cracking) have been caused always by humans, respectively by his konwledge
and conscience. The paper elaborates Croatian experience in modern QA
system approach, in acreditations, auditing and certifications of QA system
and simultaneously considering environmental system requirements.
Keywords: power plants, quality assurance systems, reliability, failures, audits, certifications.
- Type of paper
: Paper in journal
Title:
- Authors:
- Lukačević, Zvonimir (30953)
Journal: Vjesnik "Đuro Đaković"
Number: 1-2
Year: 1995
Pages: from 16 to 18
- Type of paper
: Paper in journal
Title:
- Authors:
- Gnirs, G.
- Hrivnak, I.
- Lukačević, Zvonimir (30953)
Journal: Welding in the World
Number: 3
ISSN: 0043-2288
Volume: 35
Year: 1995
Pages: from 191 to 204
Number of references: 35
Language: Francuski
- Type of paper
: Paper in journal
Title:
- Authors:
- Gnirs, G.
- Hrivnak, I.
- Lukačević, Zvonimir (30953)
Journal: Welding in the World
Number: 2
ISSN: 0043-2288
Volume: 35
Year: 1995
Pages: from 71 to 82
Number of references: 35
Language: engleski
- Type of paper
: Paper in journal
Title: NONSTATIONARY TEMPERATURE FIELDS AT WELDING
- Authors:
- Samardžić, Ivan (165270)
- Galović, Antun
- Galović, Mato
Journal: Zavarivanje
Number: 6
ISSN: 0044-1902
Volume: 36
Year: 1994
Pages: from 211 to 217
Number of references: 12
Language: hrvatski
Summary: Temperature field calculations at welding of short plates
are presented in the paper. The heat sources are classifed and the heat
saturation factors given for the nonstationary zones. The nonstationary
zones are determined also experimentally by measuring the plate hardness
along the welding line. A direct relationship between the calculated
temperature field and the measured plate hardness in the nonstationary and
quasistationary zones is shown.
Keywords: temperature fields, non stationary corditons, welding
- Type of paper
: Paper in journal
Title:
- Authors:
- Raos, Pero (121221)
- Zhu, Y.Y.
- Cescotto, S.
Journal: Kautschuk + Gummi Kunstoffe
Number: 47
Year: 1994
Pages: from 39 to 44
Language: engleski
Summary: This paper deals with finite element calculation for large
strain problems when using incompressible hyperelastic rubber material
models. The Mooney-Rivlin and van der Waals (Kilian) models will come into
consideration. Both material models considered have been implemented into
the FE code LAGAMINE for plain strain, axisymmetric and three-dimensional
cases. The problem of constant volume (incompressibility) i solved nearly
exactly by using hte penalty method. An exect twodimensional model for the
plane stress problems has been developed too. Numerical examples show the
performance of penalty formulation for two-and three-dimensional problems
chosen as well as the performance of exact (plane stress) formulation.
Keywords: finite element method (FEM), large strains, Mooney-Rivlin model, penalty method, rubber-like materials, van der Waals (Kilian) model
- Type of paper
: Paper in journal
Title: NORMALIZED MOCROALLOYED STEEL OF IMPROVED YIELD STRESS
POINT
- Authors:
- Novosel, Mladen
- Kralj, Slobodan
Journal: Zavarivanje
Number: 5/6
ISSN: 0044-1902
Volume: 37
Year: 1994
Pages: from 157 to 166
Number of references: 7
Language: hrvatski
Summary: Steps in development of normalized microalloyed steel of
improved yield stress point and effecting factors for a particular
mechanism of strengthning are discussed. Also influence of these factors
upon particular properties are considered. Specially, effects of alloying
elements such as Mn, C, Si, Al, Nb, V, Ti, as well as their common effects,
are mentioned. Characteristic features of normalized steel grades
(pearlitic-ferritic) are listed as well as their advantages related to the
processing, weldabilitym and desing approach. Also, field of application of
such material is mentioned
Keywords: microalloyed steel (peartlitic-ferritic), development, properties, mechanism of strengthening, weldability, design
- Type of paper
: Paper in journal
Title:
- Authors:
- Raos, Pero (121221)
- Čatić, Igor
Journal: Plaste und Kautschuk
Number: 41
Year: 1994
- Type of paper
: Paper in journal
Title:
- Authors:
- Raos, Pero (121221)
Journal: Polimeri
Number: 16
Volume: 4
Year: 1995
Pages: from 172 to 173
Number of references: 11
- Type of paper
: Paper in journal
Title: Endoscope - an Instrument of Great Capabilities - Help and
Saving in Condition Examination of Equipment in Operation
- Authors:
- Lukačević, Jadranka
Journal: EGE
Number: 7
ISSN: 1330-0628
Volume: 2
Year: 1994
Pages: from 59 to 60
Language: hrvatski
Summary: Industrial endoscope is a product of high technology and
application of optical fibre. Until recently its use was bound
predominantly to medecine. Today in our country the endoscope begins to be
used in the field of energetics, petrochemistry and other fields of
industry as well. By means of that instrument, visual inspection of
equipment receives a new important dimension and a big role in condition
evaluation, particularly in prevention and hindering damages and accidents.
Today, the most up-to-date types of endoscopes, even 12 meters long, are
available in TPK - Zavod za energetsku i procesnu opremu that possesses
also great experience of their use in evaluation of condition of equipment
in operation.
- Type of paper
: Paper in proceedings
Title: technology of localized repair by welding
- Authors:
- Lukačević, Zvonimir (30953)
- Samardžić, Ivan (165270)
- Editors
- Grubić, Kajo
Proceedings title: Materijali i zavarivanje u naftnim i petrokemijskim postrojenjima
Language: hrvatski
Place: Sisak
Year: 1992
Pages: from 161 to 170
Meeting: Materijali i zavarivanje u naftnim i petrokemijskim postrojenjima
Held: from 11/19/92 to 11/20/92
Summary: A general approach to repair-revitalization of pressure
vesselsis discussed. Specific steps of procedure of repair have
beenconsidered, being inevitable condition of a successful
repair.Considering the fact that repairs are made applying short welds,some
problems related to stability of temperature field atwelding are discussed.
A different approach is suggested forexecution of short weld runs, because
there are significantchanges compared to case of long ones.
Keywords: repair welding, pressure vessels, HSLA steel
- Type of paper
: Paper in proceedings
Title: Quality analysis in producing constructions machinery
items
- Authors:
- Samardžić, Ivan (165270)
- Stanić, Perica
- Maglić, Leon
Proceedings title: CIM '93
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from 61 to 68
Meeting: 2. međunarodno savjetovanje proizvodnoga strojarstva
Summary: Results of quality analysis in producting construction
machineryitems which cover various technologies are given in this paper.The
most frequent mistakes in producting are shown. That mistakescould be avoid
by efficiency organisation of production andcontrol activities, by lower
total production costs and achievedrequested product quality.
Keywords: Quality analysis, Construction machinery
- Type of paper
: Paper in proceedings
Title: Application of finite element method to calculation of
strain and elastic after-effect in axial symmetric plate bending
- Authors:
- Grizelj, Branko (18873)
- Editors
- Cebalo, Roko
Proceedings title: CIM '93
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from 17 to 24
Summary: metoda konačnih elemenata, pomak, naprezanje, elastično
vraćanje
Keywords: finite element method, displacement, stress, elastic after effect
- Type of paper
: Paper in proceedings
Title: Application of finite element method in plate bending
- Authors:
- Grizelj, Branko (18873)
- Editors
- Cebalo, Roko
Proceedings title: CIM '93
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from 9 to 16
Meeting: 2. međunarodno savjetovanje proizvodnoga strojarstva
Summary: The finite element method system consists of there
parts:preprocessor, main program and post processor. Its exactnessdepends
on input data (pretprocessor) and particulariy onstress-strain curve in
reshaping nest generating and boundaryconditions.
Keywords: finite element method, plate bending, input data
- Type of paper
: Paper in proceedings
Title: Influence of welding parameters on weld hardness
- Authors:
- Samardžić, Ivan (165270)
- Despotović, Božo
- Editors
- Cebalo, Roko
Proceedings title: CIM '93
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from 1 to 8
Meeting: 2. međunarodno savjetovanje proizvodnoga strojarstva
Summary: In this paper is given influence of welding parameters
onhardness in welded joint. Microalloyed steel Nioval 50 isselected as a
base material, and electrode EVB 2,5 Ni as a filler material. Increased
hardness can cause more troubles, forinstance crack appearing during
fabrication, stress corrosioncracking (if welded joint is exposed to
aggressive medium inservice and if exist high tensile strength level) etc.
Keywords: welding parameters, hardness, microalloyed steels
- Type of paper
: Paper in proceedings
Title: CIM and some aspects of the working position of a man
- Authors:
- Jurić, Miroslav (155741)
- Editors
- Cebalo, Roko
Proceedings title: CIM '93
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from 107 to 114
Meeting: 2. međunarodno savjetovanje proizvodnoga strojarstva
Summary: The actual working processes suggest that the conditions or
thestandard labour force will be essentially reduced and the man'swork will
suffer from changes and uncertainty. It is intetion tohere to sum up the
evidence into one of the possible directionsto be expected with the new
technical-technological system.
Keywords: CIM, integrations, work
- Type of paper
: Paper in proceedings
Title: Estimation model of optimal relationships of reliability
parameters and maintability
- Authors:
- Bucić, Josip (150780)
- Editors
- Cebalo, Roko
Proceedings title: CIm '93
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from 69 to 76
Meeting: 2. međunarodno savjetovanje proizvodnoga strojarstva
Summary: In process of technical system development it is important
todetermine such reliability level and maintability which will beoptimal,
means to be suitable for minimum costs to reach demandedsystem
availability. This article presents optimisation model ofchosen reliability
indexes and maintainability according realisedminimum costs in production
phases and system exploatation. Formodel realisation possibility it is
necessary to rise importanceof statistical data collection about costs of
reliability expandsand technical system maintainability.
Keywords: reliability, maintainability, avaliability, optimisation
- Type of paper
: Paper in proceedings
Title: Investigation of the effect of parameters boriding on
structure, hardness, and wear of steel
- Authors:
- Krumes, Dragomir (60515)
- Marković, Radojka (81226)
- Kladarić, Ivica
- Editors
- Cebalo, Roko
Proceedings title: CIM '93
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from 47 to 54
Meeting: 2. međunarodno savjetovanje proizvodnoga strojarstva
Summary: The effect of heat treatment-boriding parameters on
hardness andstructure of carbon and alloy stells has been investigated in
thework. In addition, resistance to wear by abrasion of the boridlayers
obtained (Fe2B and FeB + Fe2B) has also been tested.
Keywords: boriding, hardness, structure
- Type of paper
: Paper in proceedings
Title: Testing the quantity of developed gasin in mould and core
mixtures improved by geogr fischer method
- Authors:
- Budić, Ivan (162480)
- Bonačić-Mandić, Zoran
- Editors
- Cebalo, Roko
Proceedings title: CIM '93
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from 49 to 56
Meeting: 2. međunarodno savjetovanje proizvodnoga strojarstva
Summary: Testing quantity of developed gas with the classical GF
methodhas many deficiencies in view of accuracy of measurement
andpresentation of obtained results. the classification of castingbinders
developed on the basis of that is not reliable, becausethe gas
characteristic of the core (the maximum quanty of gas)cannot be accepted as
the universal measure for theclassification of casting binders. Changes in
the standard GFinstruments have been described in this work. Testing of
thequanitity of developed gas for several kinds of mixtures has beendone
with modified instruments. The new classification of castingbinders has
been suggested. That classification has taken intoconsideration the
produced pressure and the speed in which gasdevelopes.
Keywords: modul mixture, core mixture, the quantity of gas, porosity
- Type of paper
: Paper in proceedings
Title: The use of different granulation of silica sand for core
making
- Authors:
- Beslić, Milan
- Budić, Ivan (162480)
- Editors
- Cebalo, Roko
Proceedings title: CIM '93
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from 57 to 61
Meeting: 2. međunarodno savjetovanje proizvodnoga strojarstva
Summary: Core making is one of siginificant phases in the process
ofcolumn radiators and boiler elements. The used silica sandsignificanthly
influences cast quality. The shape and the size ofsand grains determine
quantity of binder and other additives andcondition design of tools for
core making. Different designs oftools, technological and economic analysis
for three differentcore mixturess are presented in this paper.
Keywords: silica sand, binder, cast, tools
- Type of paper
: Paper in proceedings
Title: Modern integrated manufacturing
- Authors:
- Kljajin, Milan (18862)
- Editors
- Cebalo, Roko
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 31 to 38
Meeting: Suvremeni trendovi proizvodnog strojarstva
Summary: This paper contains an experiences of the developed world
in viewof CIM (Computer Integrated Manufacturing) introduction
andapplication, or MIM (Modern Integrated Manufacturing) as thehigher
level. Generally there exists an apposition in view ofcomputer introduction
into production process, as in thedeveloped world so and by us. This
opposition is one of thegreatest reasons for relatively low level of CIM
and MIMrepresentation in a production firms. This paper is talking
alsoabout some primary reasons of this position, and proposes someideas to
acquiring the leader's support for CIM introduction intoa production firm.
Keywords: CIM system, MIM conception
- Type of paper
: Paper in proceedings
Title: CAD in a production circle
- Authors:
- Kljajin, Milan (18862)
- Editors
- Cebalo, Roko
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 21 to 28
Meeting: Suvremeni trendovi proizvodnog strojarstva
Summary: This paper contains some reflections and analysisses in
view ofCAD (Computer Aided Design) choice, importance, usefulness andeffect
in a production circle or process. It is talking alsoabout prerequisite
conditions and justifiableness of CADintroduction into a production circle,
and about CAD influence onthe quality assurance, or about some facts
without them it can behard to assure usefully CAD application in a
production circle.
Keywords: CAD System, production circle, data bases, marginal conditions
- Type of paper
: Paper in proceedings
Title: Computer application in steel structure load-carrying
capacity control
- Authors:
- Vnučec, Zdravko (52733)
- Editors
- Cebalo, Roko
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 185 to 192
Meeting: Suvremeni trendovi proizvodnog strojarstva
Keywords: nosivost konkstrukcije, tenzometrijsko mjerenje, obrada podataka, programski paket
- Type of paper
: Paper in proceedings
Title: About the organizing principles of current technical
structures
- Authors:
- Jurić, Miroslav (155741)
- Mazurek, Miroslav
- Editors
- Cebalo, Roko
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 67 to 76
Meeting: Suvremeni trendovi proizvodnog strojarstva
Summary: Industrial organization is continuously "in persuit" of
differentforms of disfunctional, wasteful effects of energy, matter
andinformation. Bringing these processes to an end became possibleand quite
real for the fundamental principles have abready beenbuilt into their
functioning schamata, i.e. immanent to thetechnical structures.
Keywords: organization, information, technique, hierarchy
- Type of paper
: Paper in proceedings
Title: Market dynamism and production systems
- Authors:
- Jurić, Miroslav (155741)
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 57 to 66
Meeting: Suvremeni trendovi proizvodnog strojarstva
Summary: Marketing dynamism with all its ensuing implications has to
beconsidered as a distinctive
- Type of paper
: Paper in proceedings
Title: Relatoinship between welding parameters at welding
experimental plate of HSLA steel Nioval 50 by electrode EVB 50
- Authors:
- Samardžić, Ivan (165270)
- Editors
- Cebalo, Roko
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 57 to 64
Meeting: Suvremeni trendovi proizvodnog strojarstva
Summary: It was expressed a relationship between welding parameters
atexperimental welding plate of HSLA steel Nioval 50 by regressionanalyse.
Expresion are applicable in Technology and QualityControl units inside
determinated limits.
Keywords: MMA welding, welding parameters, HSLA steels, regression analyse
- Type of paper
: Paper in proceedings
Title: Revitalization of components in oil and petrochemical
plants applying expert systems
- Authors:
- Lukačević, Zvonimir (30953)
- Gajzler, Zdenko
- Editors
- Grubić, Kajo
Proceedings title: Materijali i zavarivanje u naftnim i petrokemijskim postrojenjima
Language: hrvatski
Place: Sisak
Year: 1992
Pages: from 285 to 294
Meeting: Materijali i zavarivanje u naftnim i petrokemijskim postrojenjima
Held: from 11/19/92 to 11/20/92
Summary: Based on the experience of many years in investigating
thecauses and types of failures in damaged vessels and piping in
oilrefineries and storage tanks, a methodology of assessing actualcondition
of a given component, i. e. its reliability andassessment of possible
enlarging of its service life, is workedout. In order to improve the
efficiency of solving therevitalization problems, use of expert systems is
suggested.
Keywords: revitalization, pressure vessels, expert system
- Type of paper
: Paper in proceedings
Title: Development of Quality control system
- Authors:
- Popović, Branko (130550)
- Maglić, Leon
- Pranić, Ante
- Editors
- Gornik, Boris
Proceedings title: Budući razvoj organizacije
Language: hrvatski
Place: Karlovac
Year: 1991
Pages: from 69 to 77
Meeting: IV memorijal "Aleksandar Đurašević"
Held: from 05/22/91 to 05/24/91
- Type of paper
: Paper in proceedings
Title: Flexible manufacturing systems in use
- Authors:
- Popović, Branko (130550)
- Maglić, Leon
- Jurić, Miroslav (155741)
Proceedings title: Organizacija poslovno proizvodnih sustava
Language: hrvatski
Place: Sarajevo, Bosna i Hercegovina
Year: 1991
Pages: from 0 to 0
Meeting: Organizacija poslovno proizvodnih sustava
Summary: Flexible manufacturing systems (FMS) are new step in
theindustrial revolution, therefore young people should be educatedto use
future technologies. These text deals about education andFMS-in-use
problems based upon experiences in using EMCO system.
Keywords: FMS, education, application
- Type of paper
: Paper in proceedings
Title: Cost determing for product Quality control
- Authors:
- Popović, Branko (130550)
- Maglić, Leon
Proceedings title: XIX Jugoslavensko savjetovanje o kvaliteti
Language: hrvatski
Place: Sarajevo, Bosna i Hercegovina
Year: 1991
Pages: from 0 to 0
Meeting: XIX Jugoslavensko savjetovanje o kvaliteti
- Type of paper
: Paper in proceedings
Title: Failure analysis and prevention of weldments
- Authors:
- Lukačević, Zvonimir (30953)
Proceedings title: JOM-6
Language: engleski
Place: Helsingor, Denmark
Year: 1993
Pages: from 587 to 600
Meeting: International conference on the joining of materials
Held: from 04/05/93 to 04/07/93
Summary: Avoidance of possible failure consequences to humans,
propertyand environment is a main engineering task. Common failure modesand
causes are considered. Failures are influenced bydeficiencies in material
selection and in material quality,deficiences in fabrication and by
improper service conditions.General practice in failure analysis both
analytical -theoretical and practical "in situ" and laboratory
investigationmethods are listed. QA and Reliability assurance
programmes,manuals and systems are ponted out as the need to assure
weldmentreliability and safety for public. Some Failure study examplesare
given.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Krumes, Dragomir (60515)
- Kladarić, Ivica
- Marković, Radojka (81226)
Proceedings title: Tribologija u agroindustrijskom komoleksu
Language: hrvatski
Place: Osijek
Year: 1993
Pages: from 0 to 0
Meeting: Tribologija u agroindustrijskom kompleksu
Held: from 09/23/93
Summary: The influence of isothermal transformation of perlitic
ductiliron (ADI-Austempered ductil iron) on tribological properties
wasinvestigated. The resultats of tribological testing on adhesionand
abrasion, where test pieces of ductil iron have been infriction pair
firstly with steel plate and secondly with plate ofductil iron showed that
wear resistance of austempered ductiliron on bainite structure is
considerable higher iron on ofthermical untreated ductil iron.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Vlatko, Marušić
- Krumes, Dragomir (60515)
- Kladarić, Ivica
- Marković, Radojka (81226)
- Lukačević, Jadranka
Proceedings title: Tribologija u agroindustrijskom kompleksu
Place: Osijek
Year: 1993
Pages: from 0 to 0
Meeting: Tribologija u agroindustrijskom kompleksu
Held: from 09/23/93
Summary: Von drei grossen europeischen Herstellern der
Schneckenpressenvom Pflanzenoel gibt es einen, der die Arbeitsteile die
einenstarken Abnutzungsgrad haben mit thermodiffusischem
Schutzbelagliefert. Nach der Abnutzung in der Exploatation wurden die
Musterder origi-nelen Importteile und inlandischer Herkunft gesammelt.Durch
die Analyse wurde festgestellt, dass die originelen Teilemit Karbonitrirten
Schutzbelag bezueglich der inlandischenEinsatzgehaerteten Teile, eine
grossere Oelsamenmenge bearbeitethaben bis Austausch und dass dem
Nutzungsgrad meistens dieFlaeche der Gewindestirnspitze der Segmente und
Rande derMesserarbeitsflaechen des Korbelags ausgesetzt werden und dassdas
Kriterium der unbenutzlichen kritischen Abnutzung der Teilenicht
gleichmaessig definiert wird.
- Type of paper
: Paper in proceedings
Title: The effect of heat treatment on mechanical properties of
seamless gas bottles
- Authors:
- Krumes, Dragomir (60515)
- Gaić, Nikola
- Bošković, Niko
- Lazarević, Marko (61033)
Proceedings title: Toplinska obrada metala
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 0 to 0
Meeting: Toplinska obrada metala
Held: from 06/17/92
Summary: The aim of this work was to study the influence of heat
treatmentparameters on mechanical properties of the steel Č8380 being
usedin making gas bottles. By tempering on temperatures 650 oC for 45and 90
minutes, respectively, the influence of these parameterson longitudinal and
transversal notch impact toughness, hardness,tensile strength and yield
strength was evaluated. The gasbottles were pressurised to bursting.
Keywords: seamless gas bottle, heat treatment, mechanical properties
- Type of paper
: Paper in proceedings
Title: Influence of annealing on the fatique strenght of welded
microalloyed steels
- Authors:
- Lazarević, Marko (61033)
- Krumes, Dragomir (60515)
- Lukačević, Jadranka
Proceedings title: Toplinska obrada metala
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 0 to 0
Meeting: Toplinska obrada metala
Held: from 06/17/92
Summary: The influence of annealing for releasing of the residual
stresseson the fatique strenght of welded joints mikroalloyed steelNIOVAL
50 has been studied. The annealing was performed at thereetemperatures wich
cover the basic area being recommended for suchkind of treatment of welded
joints microalloyed steels. Theresults show that properties of welded
joints decrease byannealing.
- Type of paper
: Paper in proceedings
Title: Determination of deformations at bending of duble-curved
plates
- Authors:
- Grizelj, Branko (18873)
- Editors
- Cebalo, Roko
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 49 to 56
Meeting: Suvremeni trendovi proizvodnog strojarstva
Summary: Deformations must be determined for the sake of
determination ofstress and deformation rate ratio. Deformations are
beingdetermined by introduction of p=r/r* ration. Ratio of the fiberradius
r and the value r* is being determined by measurement ofdeterminations and
radius at lateral surface of the bending test.
Keywords: Bending of doublecurved plates, deformations
- Type of paper
: Paper in proceedings
Title: Das giessen derradiatoren mit der formmaschine disamatic
- Authors:
- Budić, Ivan (162480)
- Editors
- Cebalo, Roko
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 23 to 28
Meeting: Suvremeni trendovi proizvodnog strojarstva
Summary: Die Charakteristik der Formaschinen DISAMATIC ist die
Herstellungder Formen ohne Formrahmen, welche sich in
unuterbrochlicherReiche aneinanderfuegen, und welche damit
senkrechteFormverteilung beanspruchen. Nach der Evidenz der
FirmaDISA-Kopenhagen ueber dem Produktions zustand der bisherhergestelten
Formanlagen, geht die Tatsache hervor, dass niemandmit dieser Formmaschinen
die Radiatoren produziert. Trotzdemdieser Informationen, wegen sehr hocher
Produktionsleistung derFormaschinen DISAMATIC, in der Firma "Plamen"
Slavonska Požega,die Herstellung der Radiatorengliedern Typ "Požega"
eingeleitetist.
Keywords: Entgasung, Entlueftung, Eingussystem
- Type of paper
: Paper in proceedings
Title: Reflection of austempering on mechanical properties of
ductil iron NL 700
- Authors:
- Krumes, Dragomir (60515)
- Matejiček, Franjo
- Lazarević, Marko (61033)
- Kladarić, Ivica
- Editors
- Cebalo, Roko
Proceedings title: Suvremeni trendovi proizvodnog strojarstva
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 37 to 44
Meeting: Suvremeni trendovi proizvodnog strojarstva
Summary: The influence of isothermal transformation of ductil iron
NL700on structure of upper and lower bainite was investigated. Byisothermal
tempering of perlitic ductil iron it is possible toincrease mechanical
properties: hardness HV, strength Rm, Rp,o,2,elongation A, by keeping the
value of toughness KV. Theinvestigation of fracture toughness KIc showed
that isothermaltempering considerabli influences increase of racture
toughnesswhat decrease the danger of appearance of brittle fracture.
Keywords: Austemered ductil iron (ADI), Mechanical properties, Fracture toughness
- Type of paper
: Paper in proceedings
Title: QA requirements for high strength steel
- Authors:
- Lukačević, Zvonimir (30953)
Proceedings title: IIW/IIS 44th Annual assembly in the Hague
Language: engleski
Place: Hague, Netherland
Year: 1991
Pages: from 0 to 0
Meeting: IIW/IIS 44th Annual assembly in the Hague
Summary: An applicationo of the same QA requirements for mild steel
andfor HSS weldments is not correct, especially for those weldmentsexposed
to a hostile environment service.
The paper discusses and proposes some additional QA/QCrequirements which
are missing or not properly defined innational and international codes and
standards, and couldcontribute considerably to a more reliable operation of
HSSwelded pressure vessels. The altention is directed to avoidanceof
fabrication, hydrostatic and inservice cracking. The large HSSspherical
liquid gas storage tanks, regarding heavy consequencesto humans, propriety
and environment in a case of a criticalfailure, have to be treated from the
QA point of view, similar tonuclear components
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Lukačević, Zvonimir (30953)
Proceedings title: Kvaliteta, ekologija, ekonomija
Language: hrvatski
Year: 1990
Pages: from 0 to 0
- Type of paper
: Paper in proceedings
Title: Knowledge based system (ESR) assisted assessment of the
remaining life time of power plant components predicted by standards
- Authors:
- Jovanović, Aleksandar (176700)
- Maile, K.
- Kautz, H.R.
- De Witte, M
Proceedings title: 16.MPA-Seminar
Language: njemački
Place: Stuttgart, Njemačka
Year: 1990
Pages: from 181 to 1820
Meeting: 16.MPA - Seminar
- Type of paper
: Paper in proceedings
Title: Practical treatment of uncertainties appearing in
acquisition of knowldge for knowledge based systems in structural
engineering
- Authors:
- Jovanović, Aleksandar (176700)
Proceedings title: 1 st Int.Symposium on Uncertainty Modeling and Analysis (ISUMA '90)
Language: engleski
Year: 1990
Pages: from 325 to 330
Meeting: ISUMA '90
Summary: Uncertainties appearing in, or knowledge acquisition
haveappcared as one of major problems in development of knowledgebased
systems (KBS) applied in the field of structuralengineering at MPA
Stuttgart, General theoretical concepts haveoften to be modified and/or
combined with the ad hoc developedsolutionsin order to solve these
problems. This has been provedby the results of the recent MPA inquiry
which are presented inthe paper (the inquiry involved over 40 engineers,
expressingtheir understanding of linguistic descriptors of engineeringterms
and uncertainty estimators used in KBSs).
- Type of paper
: Paper in proceedings
Title: Integrating Knowledge-Based, Hypermedia and Conventional
Software Systems in Engineering applications
- Authors:
- Jovanović, Aleksandar (176700)
- Friemann, M.
- Helf, C
- Arents, H.C.
Proceedings title: 17th MPA Seminar
Language: engleski
Place: Stuttgart, Njemačka
Year: 1991
Pages: from 339 to 351
Meeting: 17th Seminar, MPA
Held: from 10/10/91 to 10/11/91
- Type of paper
: Paper in proceedings
Title: Revitalisation of mechanical components supported by
expert systems
- Authors:
- Lukačević, Zvonimir (30953)
- Gajzler, Zdenko
- Editors
- ŠKORIĆ, IVICA
Proceedings title: BIAM '92
Language: hrvatski
Place: Zagreb
Year: 1992
ISBN/ISSN: 86-81571-12-5
Pages: from 1 to 7
Meeting: XI međunarodno savjetovanje BIAM '92
Held: from 06/16/92 to 06/17/92
Summary: The paper discusses need, approach and methodology of
performingrevitalisation of mechanical components and
systems.Revitalisation covers repair or replacement of damaged parts.
Thepurpose of revitalisation is a component remaining life extensionand
sometimes some modifications are being made to improvereliability and to
extend the remaining component life inrelation to the original design. The
work on the revitalisationproject is of special importance because of war
destruction inCroatia where there are requirements for a quick repair of
wardamaged industrial plants and infrastructure. Revitalisation isan actual
task in the worid because it is simultaneously possibleto solve ecological
problems and energy, material, time and moneysavings. Instead of building
new components or systems, using anadequate methodology, it is possible to
extend the system lifeconsiderably. The revitalisation procedure is more
complex than afabrication of a component. Diagnostic procedure as
arevitalisation preparation phase, revitalisation performance andthe final
quality control is being described. A revitalisationexpert system
development is of great importance to improve therevilisation efficiency. A
simple comercially available shell forPC is proposed with hypermedium
software for integration of thesystem structure.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Grizelj, Branko (18873)
- Editors
- ŠKORIĆ, IVICA
Proceedings title: BIAM '92
Language: hrvatski
Place: Zagreb
Year: 1992
ISBN/ISSN: 86-81571-12-5
Pages: from 40 to 45
Meeting: XI međunarodno savjetovanje BIAM '92
Held: from 06/16/92 to 06/17/92
Summary: Kaltverformen der Segment blechen wird am hidraulische
Preschemit der Werkzeug verricht.Bei der Kaltverformung wird am demBlech
die Faltenbildung bekommen wenn die Krummungsrdius zu kleinist und die
Blechbreite zu gross ist. Bei dem Blech mit derFaltenbildungen wurden die
Proben moglichst genau auf die Faltengelgt um die Beeinflussung auf den
Werkstoffeigenschaften zubestimmen. Die bekommene Ergebnisse zeigen dass
die erheblichezeigen dass die erhebliche Andrerunge Zugfestigkeit
Rm,Streckgrenze Re, dehnung A5 und Kerbschlagzahigkeit bekommen
imVerhaltnis auf der stelle wo nicht die Faltenbildungen sind.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Lazarević, Marko (61033)
- Editors
- Matejiček, Franjo
- Krumes, Dragomir (60515)
- Ivakić, Marija (140562)
Proceedings title: Zbornik radova djelatnika Strojarskog fakulteta u 1991. godini
Place: Slavonski Brod
Year: 1991
Pages: from 71 to 80
Meeting: -
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Grizelj, Branko (18873)
- Editors
- Matejiček, Franjo
- Krumes, Dragomir (60515)
- Ivakić, Marija (140562)
Proceedings title: Zbornik radova djelatnika Strojarskog fakulteta 1991. godine
Language: hrvatski
Place: Slavonski Brod
Year: 1991
Pages: from 331 to 337
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Krumes, Dragomir (60515)
- Marković, Radojka (81226)
- Editors
- Matejiček, Franjo
- Krumes, Dragomir (60515)
- Ivakić, Marija (140562)
Proceedings title: Zbornik radova djelatnika Strojarskog fakulteta l991. godine
Language: hrvatski
Place: Slavonski Brod
Year: 1991
Pages: from 43 to 53
Meeting: -
- Type of paper
: Paper in proceedings
Title: In-service inspection of HSS storage tranks
- Authors:
- Lukačević, Zvonimir (30953)
- Jovanović, Aleksandar (176700)
- Kozak, Dražan
- Editors
- Matejiček, Franjo
- Krumes, Dragomir (60515)
- Ivakić, Marija (140562)
Proceedings title: Zbornik radova djelatnika Strojarskog fakultet 1991.godine
Language: engleski
Place: Slavonski Brod
Year: 1991
Pages: from 369 to 374
Meeting: -
Summary: The paper deals with the problem of detection of
in-servicecrackingin high strength steel (HSS) storage tanks
containingaggressive meida. Experience gained in Yugoslavia in the area
ofnon-destructive examination (NDE) of ammonia rail tanks and LPGstorage
tanks is presented. The statistical data are used fordemonstration of a
methodology for the detection probability andfor the tanke reliability
assesment based on the fracturemechanics approach.
Keywords: High strength steel (HSS), NDE, reliability,quality assurance (QA), pressure vessell, cracking
- Type of paper
: Paper in proceedings
Title: QA Reguirements for pressure vessel cracking avoidance
- Authors:
- Lukačević, Zvonimir (30953)
- Editors
- Matejiček, Franjo
- Krumes, Dragomir (60515)
- Ivakić, Marija (140562)
Proceedings title: Zbornik radova djelatnika strojarskog fakulteta 1991.godine
Language: engleski
Place: Slavonski Brod
Year: 1991
Pages: from 359 to 367
Meeting: IIW/IIS 44th Annual assembly in the Hague
- Type of paper
: Paper in proceedings
Title: Hibrid knowledge-based and hypermedia systems for
engineering applications
- Authors:
- Jovanović, Aleksandar (176700)
- Bogaerts, W
Proceedings title: Avigon '91 Conference Expert System and their Applications
Language: engleski
Place: Avignon, Njemačka
Year: 1991
Pages: from 0 to 0
Meeting: Conference Expert System and their Applications
Held: from 05/27/91 to 05/31/91
- Type of paper
: Paper in proceedings
Title: An integrated knowledge-based system for
- Authors:
- Jovanović, Aleksandar (176700)
- Maile, K.
Proceedings title: Conference Expert System and their Applications
Language: engleski
Place: Avignon, Njemačka
Year: 1991
Pages: from 0 to 0
Meeting: Conference Expert System and their Applications
Held: from 05/27/91 to 05/31/91
- Type of paper
: Paper in proceedings
Title: Application of expert system for structural integrity
analysis of cracked components
- Authors:
- Jovanović, Aleksandar (176700)
Proceedings title: Proc.of the 6th Summer Schol on Fracture Mechanics (IFMASS)
Year: 1991
Pages: from 0 to 0
Meeting: Proc.of the 6th Summer School on Fracture Mechanics (IFMASS)
- Type of paper
: Paper in proceedings
Title: "On-line" welding parameters monitoring
- Authors:
- Antulov, Darko
- Lukačević, Zvonimir (30953)
- Samardžić, Ivan (165270)
- Kolakovski, Dražen
- Editors
- Cebalo, Roko
Proceedings title: CIM '93
Language: hrvatski
Place: Zagreb
Year: 1993
Pages: from 27 to 35
Meeting: 2. međunarodno savjetovanje proizvodnoga strojarstva
Summary: The paper describes development of an electronic device
tomonitor welding parameters. This monitor is capable to performon-line
monitoring, recording and analyzing of high speed changesof welding
parameters in order to perform QC and to characterizewelding process. The
use of the monitor is convenient forautomated welding, for research
laboratoriy word and foreducation purposes. It may be use for monitoring,
dataacquisition and data analyzes for any other field where highspeed
process are being analyzed.
Keywords: Welding parameters, Monitoring
- Type of paper
: Paper in proceedings
Title: Some expert systems for power plant components in Europe
and USA
- Authors:
- Jovanović, Aleksandar (176700)
- Gehl, S.
Proceedings title: "Expert Systems and Al Applications in the Power Generation Industry"
Language: engleski
Place: Hakone, Japan
Year: 1991
Pages: from 0 to 0
Meeting: SMIRT 11 Post Conference Seminar Nr. 13
- Type of paper
: Paper in proceedings
Title: Integration of expert systems, hypermedia, numerios and
data bases in structural engineering software systems
- Authors:
- Jovanović, Aleksandar (176700)
- Arents, H.C.
- Friemann, M.
Proceedings title: NACE Int.Symposium on the Life Prediction of Corrodible Structures
Language: engleski
Place: Cambridge, England
Year: 1991
Pages: from 0 to 0
Meeting: NACE Int. Symposium on the Life Prediction of Corrodible Structures
Held: from 09/23/91 to 09/26/91
- Type of paper
: Paper in proceedings
Title: Expert system based life assesment of high temperature
components
- Authors:
- Kussmaul, K
- Jovanović, Aleksandar (176700)
- Maile, K.
Proceedings title: SMIRT 11 Conf.
Language: engleski
Place: Tokio, Japan
Year: 1991
Pages: from 0 to 0
Meeting: SMIRT 11 Post Conference Seminar Nr. 13
- Type of paper
: Paper in proceedings
Title: Knowledge-based (Expert) Systems Needed in Materials and
StructuralEEngineering
- Authors:
- Jovanović, Aleksandar (176700)
- Friemann, M.
Proceedings title: 17 th seminar MPA
Language: engleski
Place: Stuttgart, Njemačka
Year: 1991
Pages: from 0 to 0
Meeting: 17th Seminar, MPA
Held: from 10/10/91 to 10/11/91
- Type of paper
: Paper in proceedings
Title: Overview of some relevant applications in the fiels of
power and structural engineering
- Authors:
- Jovanović, Aleksandar (176700)
- Gehl, S.
Proceedings title: 17 th Seminar, MPA
Language: engleski
Place: Stuttgart, Njemačka
Year: 1991
Pages: from 0 to 0
Meeting: 17th Seminar, MPA
Held: from 10/10/91 to 10/11/91
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Maile, K.
- Jovanović, Aleksandar (176700)
- Friemann, M.
Proceedings title: Arbeitesgemeinschaft Warmfeste Staehle, 14. Vortragveranstaltung
Language: njemački
Year: 1991
Pages: from 0 to 0
Meeting: Arbeitesgemeinschaft Warmfeste Staehle 14 Vortragveranstaltung
Held: from 11/29/91
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Maile, K.
- Jovanović, Aleksandar (176700)
- Bernstein, W.
Pages: from 0 to 0
- Type of paper
: Paper in proceedings
Title: ESR-A large expert system application in the domain of
high temperature power plant components.
- Authors:
- Jovanović, Aleksandar (176700)
- Maile, K.
- Kautz, H.R.
Proceedings title: 2nd International Forum Expert Systems and Computer Simulation in Energy Enginee
Language: engleski
Place: Erlangen, Germany
Year: 1992
Pages: from 0 to 0
Meeting: 2nd International Forum Expert Systems and Computer Simulation in Energy Engineering
Held: from 03/17/92 to 03/20/92
- Type of paper
: Paper in proceedings
Title: An expert system in the domain of life assessment of high
temperature power plant components
- Authors:
- Kussmaul, K
- Jovanović, Aleksandar (176700)
- Maile, K.
- Kautz, H.R.
Proceedings title: 5th Int.Conf.in Creep of Materials
Language: engleski
Place: Orlando, Florida
Year: 1992
Pages: from 0 to 0
Meeting: 5th Int.Conf.on Creep of Materials
Held: from 05/17/92 to 05/21/92
- Type of paper
: Paper in proceedings
Title: Integrated knowledge-based and hypermedia system for
engineering applications
- Authors:
- Jovanović, Aleksandar (176700)
- Boagerts, W
Proceedings title: Avigon '92 Conference Expert Systems and their Applications
Language: engleski
Place: Avignon, Njemačka
Year: 1992
Pages: from 0 to 0
Meeting: Conference Expert System and their Applications
Held: from 06/01/92 to 06/05/92
- Type of paper
: Paper in proceedings
Title: Practical realization of intelligent inter-process
communication in integrated expert system in materials ans structural
engineering
- Authors:
- Jovanović, Aleksandar (176700)
- Friemann, M.
- Kautz, H.R.
Proceedings title: Avigon '92
Language: engleski
Place: Avignon, Njemačka
Year: 1992
Pages: from 0 to 0
Meeting: Conference Expert System and their Applications
Held: from 06/01/92 to 06/05/92
- Type of paper
: Paper in proceedings
Title: Damage assessment of power plant components aided by an
integrated knowledge-based system (ESR): Partical use and application
examples
- Authors:
- Kussmaul, K
- Jovanović, Aleksandar (176700)
- Maile, K.
- Kautz, H.R.
- De Witte, M
- Editors
- Jovanović, Aleksandar (176700)
Proceedings title: International VGB-Conference Remaining Life Assessment
Language: engleski
Place: Mannheim, Germany
Year: 1992
Pages: from 0 to 0
Meeting: International VGB-Conference Remaining Life Assessment
Held: from 07/06/92 to 07/07/92
- Type of paper
: Paper in proceedings
Title: Training material for the ISQ course
- Authors:
- Jovanović, Aleksandar (176700)
Proceedings title: ISQ
Language: portugalski
Place: Lisabon, Portugal
Year: 1992
Pages: from 0 to 0
Meeting: ISQ
Held: from 07/01/92 to 07/03/92
- Type of paper
: Paper in proceedings
Title: Trends in development of computer workstations for
opertaing and maintance of power plants
- Authors:
- Gehl, S.
- Jovanović, Aleksandar (176700)
Proceedings title: International VGB-conference Remaining Life Assessment
Language: engleski
Place: Mannheim, Germany
Year: 1992
Pages: from 0 to 0
Meeting: International VGB-Conference Remaining Life Assessment
Held: from 07/06/92 to 07/07/92
- Type of paper
: Paper in proceedings
Title: Application of knowledge-based systems in structural
integrity analysis:Expectations, trends, results, examples.
- Authors:
- Jovanović, Aleksandar (176700)
Proceedings title: ECF-9 Conference
Language: engleski
Place: Varn, Bulgaria
Year: 1992
Pages: from 35 to 46
Meeting: 17th Seminar, MPA
- Type of paper
: Paper in proceedings
Title: Application of knowledge-based sytems in life management
of high temperature power plant components: Expectations, trends, practical
results, examples
- Authors:
- Jovanović, Aleksandar (176700)
Proceedings title: Baltica II International Conference
Language: engleski
Place: Helsinki, Finska
Year: 1992
Pages: from 0 to 0
Meeting: Baltica II International Conference
Held: from 10/05/92 to 10/06/92
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Jovanović, Aleksandar (176700)
- Maile, K.
- Samardžić, Ivan (165270)
- Bernstein, W.
- Weiss, D.
Proceedings title: 18th MPA seminar
Language: njemački
Place: Stuttgart, Njemačka
Year: 1992
Pages: from 0 to 0
Meeting: 18th Seminar, MPA
Held: from 10/08/92 to 10/09/92
- Type of paper
: Paper in proceedings
Title: Knowledge-based systems aided evaluation of replica
results in terms of remaining life assessment of power plant components
- Authors:
- Jovanović, Aleksandar (176700)
- Maile, K.
- Friemann, M.
- Auerkari, P.
- Vrhovac, M.
- Rantala, M.
- Gehl, S.
- Rantala, M.
Proceedings title: 18th MPA seminar
Language: engleski
Place: Stuttgart, Njemačka
Year: 1992
Pages: from 0 to 0
Meeting: 18th Seminar, MPA
Held: from 10/08/92 to 10/09/92
- Type of paper
: Paper in proceedings
Title: Acquisition and represation of knowledge related to crack
formation in power plant components-practical implementation in a
knowledge-based system (ESR)
- Authors:
- Jovanović, Aleksandar (176700)
- Kautz, H.R.
- Raepke, H.
- De Witte, M
Proceedings title: 18th MPA Seminar
Language: engleski
Place: Stuttgart, Njemačka
Year: 1992
Pages: from 0 to 0
Meeting: 18th Seminar, MPA
Held: from 10/08/92 to 10/09/91
- Type of paper
: Paper in proceedings
Title: Knowledge-based software systems for power plant
applications developed at MPA Stuttgart
- Authors:
- Jovanović, Aleksandar (176700)
Proceedings title: ACT 92 Conference
Language: engleski
Place: Phoenix, USA
Year: 1992
Pages: from 0 to 0
Meeting: ACT 92 Conference
Held: from 12/09/92 to 12/11/92
- Type of paper
: Paper in proceedings
Title: Overview of artifical intelligence tools for reducing the
cost and risk of corrosion and related material failures
- Authors:
- Boagerts, W
- Jovanović, Aleksandar (176700)
- Vabcoiolle, M.
Proceedings title: 10 th European Corrosion Congress
Language: engleski
Place: Barcelona, Spain
Year: 1993
Pages: from 0 to 0
Meeting: 10th European Corrosion Congres
Held: from 07/05/93 to 07/08/93
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Orešković, Vlado (127975)
Proceedings title: XV sdavjetovanje o tehnološkim dostignućima i ekološkim rješenjima u proizvodnj
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 0 to 0
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Belić, Anica (61542)
Proceedings title: Savjetovanje DZZM
Language: hrvatski
Place: Pančevo, Jugoslavija
Year: 1991
Pages: from 0 to 0
Meeting: Savjetovanje DZZM
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Belić, Anica (61542)
Language: hrvatski
Place: Sarajevo, Bosna i Hercegovina
Year: 1991
Pages: from 0 to 0
Meeting: Ikrugli stol DZZM
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Belić, Anica (61542)
- Belić, Nenad (61553)
- Krumes, Dragomir (60515)
Language: hrvatski
Place: Split
Year: 1991
Pages: from 0 to 0
Meeting: Savjetovanje o održavanju opreme
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Belić, Anica (61542)
Language: hrvatski
Place: Zagreb
Year: 1991
Pages: from 0 to 0
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Orešković, Vlado (127975)
Proceedings title: Hrvatska energetika u ratu i nakon rata
Language: hrvatski
Place: Zagreb
Year: 1992
Pages: from 149 to 156
Meeting: Forum Dan energije u Hrvatskoj
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Orešković, Vlado (127975)
- Lukačević, Zvonimir (30953)
Language: hrvatski
Place: Bizovačke Toplice, Hrvatska
Year: 1992
Pages: from 0 to 0
Meeting: Znanstveno-stručni ljevački skup Zagreb'95
- Type of paper
: Paper in proceedings
Title: Control on personal computer bending deflections of work
piece by turning cutting processes
- Authors:
- Vnučec, Zdravko (52733)
- Editors
- ŠKORIĆ, IVICA
Proceedings title: BIAM '92
Language: hrvatski
Place: Zagreb
Year: 1992
ISBN/ISSN: 8681571-12-5
Pages: from 30 to 35
Meeting: XI međunarodno savjetovanje BIAM '92
Summary: Control of bending deflections of work pieces by turning
cuttingprocesses is described. Processing on personal computer wasdeveloped
for control of the optimal parameters by turningcutting processes
Keywords: bending deflections, turning cutting, sftware system
- Type of paper
: Paper in proceedings
Title: Possibility of production electric heating plates on the
automatc moulding machine by use shell moulds
- Authors:
- Budić, Ivan (162480)
- Bonačić-Mandić, Zoran
- Editors
- ŠKORIĆ, IVICA
Proceedings title: BIAM '92
Language: engleski
Place: Zagreb
Year: 1992
ISBN/ISSN: 86-81571-12-5
Pages: from 12 to 16
Meeting: XI međunarodno savjetovanje BIAM '92
Summary: In this paper production of the electric heating plates
areexplained. The plates are made on the automatic moulding
machine"Disamatic" by use of shell moulds. Attained quality and defectfree
casting make this relatively costly process completelyusefull.
- Type of paper
: Paper in proceedings
Title: Kontrolle der modelen fuer die serienherstellung der
gusstuecken in den formen fuer einmallige anwendung
- Authors:
- Vidović, Drago
- Budić, Ivan (162480)
- Editors
- ŠKORIĆ, IVICA
Proceedings title: BIAM '92
Language: njemački
Place: Zagreb
Year: 1992
ISBN/ISSN: 86-81571-12-5
Pages: from 21 to 26
Meeting: XI međunarodno savjetovanje BIAM '92
Summary: Unter dem Begriff der Model, versteht es das komplexe
Produkt,welches bilden mindestens zwei haelften der Modelen, zusammen
mitModelplatten, aber sehr oft erscheinen Kernmodelen,Kerneinlegern,
Schablonen u.a. Der ModelenherstellungszyklusLauft in spezialisierten
Werkstaetten unter der zwischenphasigerund Endkontrolle, vorschriftmassiger
durch Werkstaettszeichungen.Um das Formen und Auszeiehen vom Sand
zuerleichtern, dieModelenebenen sind schiefmaessing in Formrichtung
bearbeiteten,als auch die Raende sind runding bearbeiteten. Dies erschwert
dieModelenkontrolle, so dass diese nach besonderer Weise ausfuehrenmuss,
unter Benutzung der Standarden Messzeugen, und speziellenMessapparaturen.
In diesem Schrifttum sind verschiedeneKontrollenarten in der Praxis, mit
Darstellung normalen undspezielen Messapparaturen, angegeben.
Keywords: Das Model, Die Kontrolle, Das Messwerkzeug
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Hnatko, Emil (114811)
- Editors
- Matejiček, Franjo
- Krumes, Dragomir (60515)
- Ivakić, Marija (140562)
Proceedings title: Zbornik radova djelatnika Strojarskog fakulteta 1991.
Language: hrvatski
Place: Slavonski Brod
Year: 1991
Pages: from 1 to 21
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Sebastijanović, Slavko (176505)
- Dobrosavljević, Staniša
- Editors
- Matejiček, Franjo
- Krumes, Dragomir (60515)
- Ivakić, Marija (140562)
Proceedings title: Zbornik radova djelatnika Strojarskog fakulteta 1991.
Language: hrvatski
Place: Slavonski Brod
Year: 1991
Pages: from 267 to 285
- Type of paper
: Paper in proceedings
Title: Hydrocracking process as a basis for lube stock production
- Authors:
- Sebastijanović, Slavko (176505)
- Dobrosavljević, Staniša
- Editors
- Matejiček, Franjo
- Krumes, Dragomir (60515)
- Ivakić, Marija (140562)
Proceedings title: Zbornik radova djelatnika Strojarskog fakulteta
Language: hrvatski
Year: 1991
Pages: from 253 to 266
Summary: Tribology covers the field of scientific knowledge and
alsoincludes all events and materials in close vicinity of thecontacting
surfaces in reciprocal relative motion. The majorportion of modern
lubricants is being made from waxy lube stocksthat are derived from crude
oil by means of different procedures.
Successful coping with imported technologies directs ouractivities towards
optimizing the existing technologie sor/andtowards the changes in their
purposes along with the introductionof the new operating regime.
The article shows an example of a changed purpose of ahydrocracing process
concerned, in an Isomax unit, originally hadbeendesigned for fuels
production out of a fully convertiblefeed, was supposed to operate under
the changed conditions with aresidue having the distillation range same as
the one of thefeed, and to be furter used for lube stock production. The
changeof the new process parameters for stabilization and
fractionationsections.
Keywords: Lubrication, Crude Oil, hydrocracking, destilation, lube stock
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Kljajin, Milan (18862)
- Editors
- Matejiček, Franjo
- Krumes, Dragomir (60515)
- Ivakić, Marija (140562)
Proceedings title: Zbornik djelatnika Strojarskog fakulteta 1991.
Language: hrvatski
Year: 1991
Pages: from 195 to 208
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Perše, Dragutin (92030)
- Editors
- Matejiček, Franjo
- Krumes, Dragomir (60515)
- Ivakić, Marija (140562)
Pages: from 0 to 0
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Vnučec, Zdravko (52733)
- Editors
- Matejiček, Franjo
- Krumes, Dragomir (60515)
- Ivakić, Marija (140562)
Proceedings title: Zbornik djelatnika Strojarskog fakulteta 1991.
Language: hrvatski
Pages: from 287 to 297
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Perše, Dragutin (92030)
Proceedings title: Zbornik radova Održavanje industrijske opreme
Place: Osijek
Year: 1992
Pages: from 142 to 148
Meeting: Održavanje industrijske opreme
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Mrđa, E.
- Hnatko, Emil (114811)
- Đudurović, M.
- Veinović, M.
Proceedings title: Simpozij Jugoslavenskog društva za motore i vozila
Language: hrvatski
Place: Sarajevo, Bosna i Hercegovina
Year: 1991
Pages: from 0 to 0
Meeting: Simpozij Jugoslavenskog društva za motore i vozila
- Type of paper
: Paper in proceedings
Title: Failure studies of pressure vessels containing aggressive
media
- Authors:
- Lukačević, Zvonimir (30953)
Proceedings title: JOM-6
Language: engleski
Place: Helsingor, Denmark
Year: 1993
ISBN/ISSN: 87-89582-02-0
Pages: from 521 to 530
Meeting: International conference on the joining of materials
Held: from 04/05/93 to 04/07/93
Summary: Cracking of pressure vessels containing aggressive mediahas
beenreported in references and at international and nationalconferences
since 1954. High potential himan, economic, andenvironmental risks in case
of failures require detailed failurestudies to assess failure modes and
causes. A methodology forfailure analysis and prevention is presented.
Some of the available data and references are being quoted in aform of
conclusive remarks relating to PV life cycle phases :design, material
selection, fabrication, and sevice. Theattention is also directed to type
and time of crackingexperienced : fabrication, initial hydrotest, service,
inservicehydrotests, and weld repair. The additional QA
requirements,different to the requirements for vessels not exposed to
hostileenvironments are being mentioned, that could serve forestablishment
of Qa manuals or codes.
- Type of paper
: Paper in proceedings
Title: Failure analysis and prevention of weldments
- Authors:
- Lukačević, Zvonimir (30953)
Proceedings title: JOM-6
Language: engleski
Place: Helsingor, Denmark
Year: 1993
ISBN/ISSN: 87-89582-02-0
Pages: from 587 to 600
Meeting: International conference on the joining of materials
Held: from 04/05/93 to 04/07/93
Summary: Avoidance of possible failure consequences to humans,
propertyand environment is a main engineering task. Common failure modesand
causes are considered. Failures are influenced by deficiencesin design,
deficiences in material selection and in materialquality, deficiences in
fabrication and by improper serviceconditions. General practice in failure
analysis bothanalytical-theoretical and practical "in situ" and
laboratoryinvestigation methods are listed.
QA and Reliability assurance programmes, manuals and systems arepointed
oout as the need to assure weldment reliability andsafety for public. Some
Failure study examples are given.
- Type of paper
: Paper in proceedings
Title: Determination of the properties of fracture mechanics of
TStE 355 Steel
- Authors:
- Matejiček, Franjo
- Kozak, Dražan
Proceedings title: Experimental methods in solid mechanics
Language: engleski
Place: Prague, Czech
Year: 1993
Pages: from 0 to 0
Meeting: 10 th Danubia - Adria Symposium
Held: from 09/30/93 to 10/02/93
Summary: The properties of fracture mechanics were determined on
TSsE 355steel with standard methods. For the calculation of
failurepossibility on spherical pressure vessel a real stress-straincurve
was used. Examinations were made on temperature - 10degrees centigrade with
initiation crack in heat atack zone. Theresults obtained indicate tht such
TStE steel welded joint hasan effect on stable crack growth.
- Type of paper
: Paper in proceedings
Title: J-integral fem solution for stress-strain real dependence
- Authors:
- Matejiček, Franjo
Proceedings title: Experimental methods in solid mechanics
Language: engleski
Place: Prague, Czech
Year: 1993
Pages: from 0 to 0
Meeting: 10 th Danubia - Adria Symposium
Held: from 09/30/93 to 10/02/93
- Type of paper
: Paper in proceedings
Title: Recommendations for Reliable Operation of Pressure Vessels
Exposed to Aggressive Media
- Authors:
- Lukačević, Zvonimir (30953)
Proceedings title: Commission XI Pressure Vessels, Boilers and Pipelines
Language: engleski
Place: Madrid, Spain
Year: 1992
Pages: from 0 to 0
Meeting: IIW/IIS 45 th Annual Assembly in Madrid
Summary: To prevent weld cracking in vessels exposed to aggressive
mediain service, it is necessary to establish and implement additionaland
more stringent QA requirements to those applicable to mild orsome other
steel types. High yield strength steel causes highresidual stresses, very
high hardness peaks in HAZ and WM, higherprobability of fabrication cold
cracking, HT cracking and inservice SCC. Lower cracking probability will
result, if oneselects a steel of yield strength 380 MPa or less, with
besttoughness values (ChV,, CTOD) and with minimum impurities(e.g.0.001
%S). PWHT reduces residual stresses and hardness peaksand hence SCC
probability. There are only few types of BM anWM/FM that may cause some
degradation of properties after PWHT.Monitoring and control of aggressive
constituents in vesselmedium and vessel purging procedure during service
contribute toprevention of SCC and to reliable vessel operation.
QA/QCprocedures are to be established and implemented strictly. Somepeople
feel that the QA program requirements have to be to besimilar fo NPP
component requirements regarding consequences incase of catastrophic
failure of a large pressure vessel.Knowledge and responsibilities covered
in QA manual and QAactivities have to assure successful fabrication,
commissioning,service, ISI, repair and therefore a reliable operation
ofpresure vessels.
- Type of paper
: Paper in proceedings
Title: Reliability of the system with constant recovery time
- Authors:
- Perše, Dragutin (92030)
- Editors
- ŠKORIĆ, IVICA
Proceedings title: Zbornik radova 12. Međunarodno savjetovanje BIAM'94
Language: hrvatski
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-6037-03-3
Pages: from G-23 to G-26
Meeting: 12. Međunarodno savjetovanje BIAM'94.
Held: from 06/23/94 to 06/24/94
Summary: In reservation system the lowest probability boundary value
of the operating system with continuous (constant) recovery time is known.
By a long-term usage of the system this boundary value becomes equal to the
same value in the recovery of the system eith variable time of recovery.
This property is used in the paper and the solution for the Poisson's
process is given. At the end the theoretically obtained resulsts are
illustrated with duplicated and triplicated systems.
- Type of paper
: Paper in proceedings
Title: Axial symmetrical plate bending in the area of small
plastic deformation
- Authors:
- Grizelj, Branko (18873)
- Editors
- ŠKORIĆ, IVICA
Proceedings title: Zbornik radova 12. Mežunarodnog savjetovanja BIAM'94.
Language: hrvatski
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-6037-03-3
Pages: from D-17 to D-20
Meeting: 12. Međunarodno savjetovanje BIAM'94.
Held: from 06/23/94 to 06/24/94
Summary: In the paper the finite elefment method is used to calulate
displacement and stress in cold axial symmetrical plate bending during
application of load and its removal in the area of small plastic
deformation. Loading of circular plate is partially continous uniformly
distributed. The results obtained by FEM agree well with the conducted
experiments.
- Type of paper
: Paper in proceedings
Title: Mateial treatmenst by concentrated energy beams
- Authors:
- Lukačević, Zvonimir (30953)
- Editors
- ŠKORIĆ, IVICA
Proceedings title: Zbornik radova 12. Mežunarodno savjetovanje BIAM'94
Language: hrvatski
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-6037-03.3
Pages: from F-19 to F-27
Meeting: 12. Međunarodno savjetovanje BIAM'94.
Held: from 06/23/94 to 06/24/94
Summary: The paper gives a review of possible usage various
concentrated energy beams that are being used as tools for various material
treatments: thermal cutting and drilling, machining, heat treatment
welding, melting, remelting for metal purfication and other treatments.
Principles, and characteristics and scope of application are listed for:
laser, electron beam, plasma jet, water jet and for some other energy
beams.
- Type of paper
: Paper in proceedings
Title: Quality monitoring at welding process during manufacturing
- Authors:
- Samardžić, Ivan (165270)
- Maglić, Leon
- Editors
- ŠKORIĆ, IVICA
Proceedings title: Zbornik radova 12. Međunarodno savjetovanje BIAM'92
Language: hrvatski
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-6037-03-3
Pages: from G-19 to G-22
Meeting: 12. Međunarodno savjetovanje BIAM'94.
Held: from 06/23/94 to 06/24/94
Summary: Due to experiences in manufacturing it is noticed that not
enough attention has been paid to monitoring and estimation of welding
process stability. Reason for that is partly because complexity and
specifics of weld techniques and quality control of welding products. It is
necessary to emphasize that permanent quality monitoring is very important
especially at factories where welding technologies are mostly used.
Monitoring quality at welding process on the base of real production
activities will be shown in this paper.
- Type of paper
: Paper in proceedings
Title: Bending of circular plates
- Authors:
- Grizelj, Branko (18873)
- Editors
- Vranković, Nikola
Proceedings title: Zbornik radova 1. Kongresa Hrvatskog društva za mehaniku
Language: hrvatski
Place: Zagreb
Year: 1994
ISBN/ISSN: 953-96243-0-4
Pages: from 597 to 604
Meeting: 1. Kongresa Hrvatskog društva za mehaniku
Held: from 09/14/94 to 09/17/94
Summary: Analytic and numeric procedure for circular plate bending
is treated in the paper. In the application of finite element method (FEM)
in solving the problem of circular plate bending in elastic -plas area with
small deformation Prandt-Reuss's yield law is used. Loading of circular
plate is continuous of trapezoidal distribution. The results obtained by
FEM agree well with the conducted experiments. The results apply for
deformations up to 2%.
- Type of paper
: Paper in proceedings
Title: Certification in quality assurance
- Authors:
- Lukačević, Zvonimir (30953)
Proceedings title: Zbornik radova Međunarodno savjetovanje KBR u sustavu kvalitete
Language: hrvatski
Place: Zagreb
Year: 1994
Pages: from 29 to 37
Meeting: Međunarodno savjetovanje KBR u sustavu kvalitete
Summary: This paper covers some actual data in the field of QA
certification: training, auditing, consultant services and accreditation
for certification. There is a strong interest in quality improvement world
wide, that may be expressed in number of certificates issued for compliance
with ISO 9000 standard series: 20000 in the UK and only 2 in Croatia. How
to improve the present situation in Croatia.
Keywords: quality assurance, certification for quality, ISO 9000, EN 45000
- Type of paper
: Paper in proceedings
Title: Recommendations for reliable operation of pressure vessels
containing aggressive media
- Authors:
- Lukačević, Zvonimir (30953)
- Editors
- Esih, Ivan
Proceedings title: Zbornik radova znanstveni i stručni skup In memoriam Anici Belić
Language: hrvatski
Place: Slavonski Brod
Year: 1994
ISBN/ISSN: 953-6048-03-5
Pages: from 43 to 56
Meeting: Znanstveni i stručni skup in memoriam Anici Belić
Held: from 10/06/94 to 10/06/94
Summary: Cracking of pressure vessel (PV) containing aggressive
media is a serious problem that may cause leak or break of the pressure
vessel with a high potential human, economic and environmental risks. The
problem has been reported in many references assessing modes and causes of
PV failures. Cracking phenomena investigations resulted in preparation of
international recommendations for additional QA requirements for cracking
avoidance in PV containing aggressive media. The paper comments the
recommendations IIW Doc.XI-609-93.
Keywords: Pressure vessels, Cracking, Stress corrosion cracking (SCC), Quality assurance (QA), Non destructive examination (NDE)
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Lukačević, Zvonimir (30953)
Proceedings title: Proceedings of the international conference on the joining of materials JOM-7
Language: engleski
Place: Helsingor, Denmark
Year: 1995
Pages: from 39 to 48
Meeting: JOINING OF MATERIALS JOM-7
Held: to 06/02/95
Summary: By introduction of probabilistic quantification and
evaluation of weldability, where applicable, more understanding, knowledge
and confidence may be achieved for this complex property. The
probabilistic "Stress-Strength" model is being proposed for qualitative and
quantitative weldability analysis and assessment. This approach also
enables establishment of interrelationships between weldability, weld joint
efficiency, reliability and quality classes of welded joints. Practical
usage possibility of the approach has been demonstrated.
- Type of paper
: Paper in proceedings
Title: Fracture toughness in corrosive environment
- Authors:
- Matejiček, Franjo
- Lukačević, Zvonimir (30953)
- Editors
- Esih, Ivan
Proceedings title: Znanstveni i stručni skup in memoriam Anici Belić
Language: hrvatski
Place: Slavonski Brod
Year: 1994
ISBN/ISSN: 953-6048-03-5
Pages: from 89 to 100
Meeting: Znanstveni i stručni skup in memoriam Anici Belić
Held: from 10/06/94 to 10/06/94
Summary: The paper presents simplified formulas and approaches of
fracture mechanics (FM) for component reliability assessment using FM
parameters. Possibilities of FM usage for components exposed to aggressive
media are given, when cracks may initiate and propagate. Formulas for SCC
in case of static loading and for corrosion fatigue in case of dynamic
loading have been described. Discussed FM formulas enable reliability,
remaining life and defect criticality assessment for corrosion environment
conditions.
Keywords: fracture mechanics, stress corrosion cracking (SCC), corrosion fatigue
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Lukačević, Zvonimir (30953)
- Matejiček, Franjo
- Novosel, Mladen
Proceedings title: 100 Jahr Technikausbildung in Bremen
Language: njemački
Place: Bremen, Njemačka
Year: 1994
Pages: from 77 to 84
Meeting: 100 Jahr Technikausbildung in Bremen
Held: from 09/28/94 to 09/29/94
- Type of paper
: Paper in proceedings
Title: EXAMINATION OF HIGH STRENGTH STEEL WELDMENTS
SUSCEPTIBILITY TO STRESS CORROSION CRACKING
- Authors:
- Samardžić, Ivan (165270)
- Editors
- Esih, Ivan
Proceedings title: Zbornik radova znanstvenog i stručnog skupa in memoriam Anici Belić
Language: hrvatski
Place: Slavonski Brod
Year: 1994
ISBN/ISSN: 953-6048-03-5
Pages: from 111 to 120
Meeting: Znanstveni i stručni skup in memoriam Anici Belić
Held: from 10/06/94 to 10/06/94
Summary: This paper deals with problem of Stress Corrosion Cracking
(SCC) at welded joints of High Strength Steels (HSS). Various experimental
methods are mentioned which are suitable for evaluation of susceptibility
of welded joints and base material to SCC. Testing of HSS Nioval 50 to SCC
has been made in accordance with DIN 50915 and SEW 1861 standards in 50 %
solution of Ca(NO3)2 at boiling point. Analysis shows that accelerated
tests are very suitable for susceptibility of welded joints of HSS to SCC.
Keywords: High Strength Steels, Welded Joint, SCC
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Samardžić, Ivan (165270)
Proceedings title: Proceeding of the 19th Internationa Welding Congress
Language: engleski
Place: Bratislava, Slovačka
Year: 1994
ISBN/ISSN: 80-88734-02-9
Pages: from 311 to 320
Meeting: 19 th International Welding Congress
Held: from 05/11/94 to 05/12/94
Summary: This paper deals with specifics of short welds that are
typical for repair welding. Theoretical determination of nonstationary
temperature field, whih appears during welding, is done by application of
modified solutions of Furier heat flow equations. Nonstationarity of
temperature fields has an influence on mechanical properties of welded
joint (strength, hardness, toughness, ...) and therefore it is important to
include this knowledge in welding and especially in repair welding. In an
example of high strength microalloyed steel for manual arc welding the
length of nonstationary zone was calculated. With equal heat input
experimental plate of microalloyed steel was welded.Hardness in heat
affected zone along fusion line was measured. Hardness value obtained in
the nonstationary zone was significantly higher. That makes nonstationary
zone significantly weaker than the stationary zone (for example from the
standpoint of Stress Corrosion Cracking). It is necessary to avoid or
reduce its influence. To record welding parameters and weld temperature due
to better experimental determination of unstationary it is suitable to use
"on-line" monitor that is described in this paper. The main idea of this
work is to stress that hardness and other mechanical properties measured in
short welds are essentially different to those measfured at location of
stationary temperature field (middle of long welds), and that is necessary
to prescribe different welding parameters for short welds in relation to
those valid for long welds.
Keywords: Temperature Fields, Nonstationarity, Heat Affected Zone, Hardness.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Raos, Pero (121221)
- Michaeli, W.
- Zhu, Y.Y.
- Cescotto, S.
Proceedings title: PPS, European Regional Meeting
Language: engleski
Place: Strassbourg
Year: 1994
Pages: from 145 to 146
Summary: This paper deals with finite element calculation for large
strain problems when using incompressible hyperelastic rubber material
models. The Mooney-Rivlin and van der Waals (Kilian) models will come into
consideration. Both material models consideration. Both material models
considered have been implemented into the FE Code LAGAMINE for plain
strain, axisymmetric and three-dimensional cases. The problem of constant
volume (incompressibility) is solved nearly exactly by using the penalty
method. An exact two-dimensional model for the plane stress problems has
been developed too. Numerical examples show the performance of penalty
formulation for two-and three-dimensional problems chosen as well as the
performance of exact (plane stress) formulation.
Keywords: finite element method (FEM), large strains, Mooney-Rivlin model, penalty method, rubber-like materials, van der Waals (Kilian) model
- Type of paper
: Paper in proceedings
Title: MARAGING STEELS CONTAINING 12 % CHROMIUM
- Authors:
- Novosel, Mladen
- Cajner, Franjo
- Editors
- Esih, Ivan
Proceedings title: "AGRESIVNOST MEDIJA I POUZDANOST OPREME"
Language: hrvatski
Place: Slavonski Brod
Year: 1994
ISBN/ISSN: 953-6048-03-5
Pages: from 27 to 42
Meeting: Znanstveni i stručni skup in memoriam Anici Belić
Held: from 10/06/94 to 10/06/94
Summary: Metallographic fundamentals of MARAGING steels
strengthening are outlined in the paper, in order to ease further
consideration of the consequences of the chromium addition and modification
of a usual composition. Influence of 9 to 12 % chromium on microstructural
features and mechanical properties are examined. It is concluded that a
certain improvement of corrosion resistance (particularly stress corrosion
resistance) should justify the use of such steels in spite of strength
decrease in relation to MARAGING steels without chromium
Keywords: MARAGING steels, addition of chromium, effects of new composition
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Novosel, Mladen
Proceedings title: Zbornik Savjetovanja o zaštiti materijala i industrijskom finišu,
Language: hrvatski
Place: Zagreb
Year: 1994
Meeting: Savjetovanje o zaštiti materijala i industrijskom finišu
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Raos, Pero (121221)
- Michaeli, W.
- Aengenheyster, g.
Proceedings title: 1st International Conference on Mechanics of Time Dependent Materials
Language: engleski
Place: Ljubljana, Slovenija
Year: 1995
Pages: from 125 to 129
Meeting: 1st International Conference on Mechanics of Time Dependent Materials
Held: from 09/11/95 to 09/13/95
- Type of paper
: Paper in proceedings
Title: POSSIBILITIES TO DESCRIBE THE VISCOELASTICITY OF
THERMOPLASTICS
- Authors:
- Raos, Pero (121221)
Proceedings title: 13.dani DPG-a
Language: hrvatski
Place: Zagreb
Year: 1995
Pages: from 117 to 122
Meeting: 13. dani DPG-a
Held: from 09/26/95 to 09/29/95
Summary: The paper shows possibilities to describe qualitatively and
quantitatively the viscoelastic mechanical behaviour of thermoplastics.
These possibilities have been considered in regard to description
suitability and their practical applicability. The possibilities have been
considered in regard to description suitability and their practical
applicability. The empirical models, models of mechanical analogy and
integral models have been reviewed. Presented models are based on
phenomenological approach to viscoelasticity. However, we draw a
distinction betwen linear and non-linear material behaviour. Due to
specific loading conditions, thermoplastics, just as the other polymeric
materials mostly exibit non-linear behaviour in application. In order to
describe loading course (deformation history) methods based on appropriate
hypotheses as well as integral and numerical models have been considered.
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Perše, Dragutin (92030)
Proceedings title: 40. jubilarni godišnji skup KOREMA
Language: hrvatski
Place: Zagreb
Year: 1995
Meeting: 40. jubilarni godišnji skup KOREMA
Held: from 04/19/95 to 04/21/95
- Type of paper
: Paper in proceedings
Title:
- Authors:
- Perše, Dragutin (92030)
Proceedings title: 5. međunarodni simpozij o novim tehnologijama
Language: hrvatski
Place: Poreč
Year: 1995
Pages: from 103 to 106
Meeting: 5. međunarodni simpozij o novim tehnologijama
Held: from 09/25/95 to 09/27/95
- Type of paper
: Summary in proceedings
Title: The Cpk dart chart application
- Authors:
- Maglić, Leon
- Samardžić, Ivan (165270)
- Stanić, Perica
- Editors
- Katalinić, Branko
Proceedings title: 4th International DAAAM symposium
Language: engleski
Place: Brno, Czechia
Year: 1993
Pages: from 181 to 182
Meeting: 4th International DAAAM symposium
Held: from 09/16/93 to 09/18/93
- Type of paper
: Summary in proceedings
Title:
- Authors:
- Budić, Ivan (162480)
- Editors
- Katalinić, Branko
Proceedings title: 4th Internatinal DAAAM symposium
Language: njemački
Place: Brno, Czechia
Year: 1993
Pages: from 47 to 48
Meeting: 4th International DAAAM symposium
Held: from 09/16/93 to 09/18/93
- Type of paper
: Summary in proceedings
Title: AXIALSYMMETRISCHEN BIEGEN DURCH ANWENDUNG DER FEM
- Authors:
- Grizelj, Branko (18873)
- Editors
- Katalinić, Branko
Proceedings title: Zbornik sažetaka 5. internationales DAAAM symposium
Language: njemački
Place: Maribor, Slovenija
Year: 1994
ISBN/ISSN: 3-901509-00-3
Pages: from 149 to 150
Meeting: 5. Internationales DAAAM Symposium
Held: from 10/27/94 to 10/29/94
Keywords: axialsymetrisches Biegen, die Finite - Elemente - Methode (FEM)
- Type of paper
: Summary in proceedings
Title:
- Authors:
- Samardžić, Ivan (165270)
- Maglić, Leon
- Editors
- Katalinić, Branko
Proceedings title: 5. Internationales DAAAM Symposium
Language: engleski
Place: Maribor, Slovenija
Year: 1994
ISBN/ISSN: 3-901509-00-3
Pages: from 377 to 378
Meeting: 5. Internationales DAAAM Symposium
Held: from 10/27/94 to 10/29/94
- Type of paper
: Summary in proceedings
Title:
- Authors:
- Samardžić, Ivan (165270)
- Stoić, Antun
- Editors
- Katalinić, Branko
Proceedings title: Zbornik radova 5. Internationales DAAAM symposium
Language: engleski
Place: Maribor, Slovenija
Year: 1994
ISBN/ISSN: 3-901509-00-3
Pages: from 379 to 380
Meeting: 5. Internationales DAAAM Symposium
Held: from 10/27/94 to 10/29/94
- Type of paper
: Summary in proceedings
Title:
- Authors:
- Raos, Pero (121221)
- Michaeli, W.
- Aengenheyster, g.
Proceedings title: Rubbercon '95
Language: engleski
Place: Goteborg
Year: 1995
Held: from 05/10/95 to 05/12/95
- Type of paper
: Ph.D.
Title: Research of Boundary Regions of Teethed Pair Load Capacity
Faculty: Fakultet strojarstva i brodogradnje Sveučilište u Zagrebu
Author: KLJAJIN MILAN
Date of defense: 02/23/95
Language: hrvatski
Number of pages: 126
Summary: All known damages of gear-tooth flanks have been
systematized and their causes have been analyzed. The calculations of the
loading limits in respect of pitting resistance, scoring and
elastohydrodynamic or thermoelasto-hydrodynamic lubrication theory for the
gear-tooth flanks have been elaborated theretically. A proposal of
simpflied calculation of the loading limit in pursuance of
thermoelastohydrodynamic lubrication theory and some of other primary data
(e.g. amplitude and location of pressure spike, half Hertizian length,
Hertizian approach-elastic deformation, oil film thickness etc.), which are
adapted to the involute gears, have been given too. Based on the analysis
of the results of others and on my own calculations, some comments and
definitions in connection with geometry, material, oil for lubrication and
operating conditions, have been given. The calculated values some of the
observed data were confirmed by experiments.
Keywords: Gear, Involute Toothing, Load Capacity, Pitting, Scuffing, Wear, Thermoelasto-hydrodynamic Lubrication
- Type of paper
: Ph.D.
Title:
Faculty: Fakultet strojarstva i brodogradnje Sveučilište u Zagrebu
Author: GRIZELJ BRANKO
Date of defense: 02/23/95
Language: hrvatski
Number of pages: 169
Summary: The knowledge so far acquired on the plate bending proces
is presented as the introduction to the first part of this work. From the
references of several authors it can be seen that the analysis of plate
bending processes has most often been carried out by the formula rm/so 100,
so as to obtain basic figures necessary to calculate plastic flow stresses
and to calculate stress distribution for the uniaxial state of stress. K.H.
WOLTER and H.F. SCHWARK apply the analysis to the plane state of stress too
and correct the assumptions on the constancy of plate thickness during the
process of bending. Nevertheless when examining spring back they retain the
uniaxial state of stress. R.HILL used plastomechanic equations of
equlibrium in carrying out his observations of the bending process. F.PROKS
expands the use of these equations to the material with linear
strengtheining. More recent works (6) rely basically on the mentioned
works, whose authors perform experiments to test theoretical equations.
Analysing the data obtaine by analytical method, finite element method and
checking of individual cases experiments were conducted to find the factors
that influence stresses, displacements and force during application of load
to circular plate and after its removal. These factors are:
1. material of the circular plate
2. bending radius the of circular plate
3.diamter of the circular plate
4. thickness of the circular plate nad
5. way of loading of the circular plate.
To obtained equations for the calculation of force for axial-symmetrical
plate bending and to obtain displacements during loading and its removal,
data obtained by finite element method were used. The method of least
squares was used the calculation of force and displacement, the equations
being of use for solving practical problems.
- Type of paper
: M.A.
Title: High strength low alloyed steel pressure vessels crack
analysis
Faculty: Fakultet strojarstva i brodogradnje Sveučilište u Zagrebu
Author: SAMARDŽIĆ IVAN
Date of defense: 10/10/91
Language: hrvatski
Number of pages: 203
Summary: This work analyses crcaks effecting vessels made of high
strengthalloyed steels (HSLA steels). Weldability examinations of
thesesteels are discussed first. A 100 m3 railway tank and a 3000
m3spherical storage tank were taken as pressure vesselsrepresentatives. A
short review of the manufacturing technologyof the pressure vessels points
at the complexity of fabricationand control of pressure vessels as well as
at the need to supplyadditional standards and codes concerning design,
manufacture andexploitation of pressure vessels. Factors influencing
thecracking phenomen on development and propagation are given withwith
reference to literature data. Stress corrosion having beenstated as the
main influence factor in crack appearance thestress corrosion cracking
(SCC) examination was carried out onHSLA Nioval 50 steel. In addition, the
SCC sensitivity has beenrelated to hardness and stress levels in welded
joints. Heatsimulated welded items and welded plates hardness and
impacttoughness examintions revealed hardness values considerably
abovecritical values with regard to their SCC sensitivity.
Keywords: Presure vessels. HSLA, cracks, SCC
- Type of paper
: M.A.
Title: Quantification of borided layers
Faculty: Fakultet strojarstva i brodogradnje Sveučilište u Zagrebu
Author: MARKOVIĆ RADOJKA
Date of defense: 09/23/94
Language: hrvatski
Number of pages: 78
Summary: As boriding can lately be considered as technologically and
economically satisfactory procedure, it has already been applied with great
versatilely in resisting wear of materials.
Thus it has been found that the foremost application of boriding is against
wear by abrasion i.e. that the most important property of borid layers is
their high hardness. But owing to the fact that when choosing boriding
parameters the criteria for comparing the quality of boriding layers are
missing, the present work sets out to determine a unique criterion for
determining "useful depth of hardening".
Keywords: Boriding, Mikrohardness,Abrasion Wear
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 01/23/91
Author: ŠKORIĆ IVICA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 02/27/91
Author: TONČEK VLADO
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 02/27/91
Author: JURIĆ ANTO
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 03/28/91
Author: Stoić Dipl. ing. Antun
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 05/24/95
Author: Kozak dipl.inž. Dražan
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 06/22/92
Author: NUJIĆ ANTO
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 12/18/91
Author: TUNJIĆ ĐURO
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 12/18/91
Author: MEDUNOVIĆ PAVO
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 06/29/92
Author: VLADIĆ MATO
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 11/27/92
Author: KVESIĆ TOMISLAV
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 12/22/92
Author: DAMJANOVIĆ MLADEN
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 04/14/93
Author: Virkes Tomislav
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 06/23/93
Author: BOTICA GORDANA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 06/23/93
Author: Galović Mato
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 06/23/93
Author: MUSTAPIĆ IVICA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 12/22/94
Author: PAVIĆ JOSIP
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 05/29/95
Author: POLJAK TOMISLAV
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 07/13/95
Author: STOIĆ ANKICA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 06/19/91
Author: JELAVIĆ MIRJANA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 06/19/91
Author: TOMAŠ DARKO
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 11/27/92
Author: KAPOV ISTOK
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 12/11/91
Author: TRESKA ZLATKO
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 12/11/91
Author: KRAJINOVIĆ IVICA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 01/15/92
Author: MATIJEVIĆ PERO
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 01/15/92
Author: KOVAČEVIĆ DRAGIŠA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 12/16/92
Author: ĆORIĆ BOŽIDAR
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 02/17/93
Author: KOVAČEVIĆ IVICA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LUKAČEVIĆ ZVONIMIR
Date of defense: 07/05/94
Author: SMOLJO ZORAN
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: GRIZELJ BRANKO
Date of defense: 05/14/92
Author: TIŠMA PREDRAG
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: GRIZELJ BRANKO
Date of defense: 05/22/92
Author: TORBIĆ BRUNO
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: GRIZELJ BRANKO
Date of defense: 06/24/93
Author: KOVAČ IVAN
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: GRIZELJ BRANKO
Date of defense: 05/25/94
Author: ANDRAŠIĆ DRAŽEN
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: GRIZELJ BRANKO
Date of defense: 06/28/94
Author: SOLDAN MANDA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: GRIZELJ BRANKO
Date of defense: 12/21/94
Author: PEJIČIĆ VIDOSAVA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: GRIZELJ BRANKO
Date of defense: 12/21/94
Author: MILIĆ SAŠA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: GRIZELJ BRANKO
Date of defense: 07/17/95
Author: KRIŠTO DALIBOR
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: GRIZELJ BRANKO
Date of defense: 06/19/91
Author: MATASOVIĆ PREDRAG
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: GRIZELJ BRANKO
Date of defense: 03/19/92
Author: HRKAČ NATAŠA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: GRIZELJ BRANKO
Date of defense: 02/12/92
Author: ĆURIĆ BLAŽ
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: GRIZELJ BRANKO
Date of defense: 02/12/92
Author: CVITANOVIĆ MIRELA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: GRIZELJ BRANKO
Date of defense: 04/14/93
Author: LUKIČEVIĆ MARIJAN
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: GRIZELJ BRANKO
Date of defense: 12/07/93
Author: DELIĆ MARIJA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: GRIZELJ BRANKO
Date of defense: 12/07/93
Author: STEPIĆ PERO
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: GRIZELJ BRANKO
Date of defense: 12/07/93
Author: ZEBA ZLATAN
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: GRIZELJ BRANKO
Date of defense: 02/08/94
Author: SEKULIĆ GORAN
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: GRIZELJ BRANKO
Date of defense: 02/08/94
Author: LEŠINA PETAR
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: GRIZELJ BRANKO
Date of defense: 02/08/94
Author: ĐURINA ZORAN
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: GRIZELJ BRANKO
Date of defense: 04/12/94
Author: BOKULIĆ DARKO
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: GRIZELJ BRANKO
Date of defense: 04/12/94
Author: MAĆAŠ MARIJA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: GRIZELJ BRANKO
Date of defense: 06/07/95
Author: POROBIĆ ANELA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LAZAREVIĆ MARKO
Date of defense: 01/23/91
Author: BAKETARIĆ JURE
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LAZAREVIĆ MARKO
Date of defense: 06/28/94
Author: ERGOVIĆ DAVOR
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LAZAREVIĆ MARKO
Date of defense: 06/01/95
Author: NARANČIĆ MLADEN
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LAZAREVIĆ MARKO
Date of defense: 06/01/95
Author: JELIĆ DRAGAN
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: LAZAREVIĆ MARKO
Date of defense: 07/05/94
Author: SKELEDŽIĆ MLADEN
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 01/13/94
Author: SOLDO MARIO
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 01/13/94
Author: GUNČEVIĆ DAVOR
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 06/07/94
Author: PETRANOVIĆ BOŽIDAR
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 06/07/94
Author: VINKOVIĆ ZORAN
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 07/05/94
Author: MIRKOVIĆ KATICA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 01/13/95
Author: BAOTIĆ VLADIMIR
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 01/13/95
Author: KUTEROVAC JOSIP
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 01/12/95
Author: KRULJAC BOŽICA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 01/12/95
Author: MITROVIĆ ANTONIJO
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 01/13/95
Author: ŠKULJEVIĆ IVAN
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 02/08/95
Author: ĐURĐEVIĆ NENAD
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 02/08/95
Author: ĐURĐEVIĆ PREDRAG
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 02/08/95
Author: MARSENIĆ TIHOMIR
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 05/11/95
Author: PAVELIĆ BOŽIDAR
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 06/07/95
Author: ĐURAŠINOVIĆ ŠIMO
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 07/05/95
Author: GALIĆ VJEKOSLAV
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 07/07/95
Author: VRBANJAC STJEPAN
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 07/07/95
Author: ZEBA ZORAN
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 07/07/95
Author: KATINIĆ PERICA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 07/05/95
Author: BEUK MLADEN
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 12/21/94
Author: KOVAČEVIĆ ŽELJKO
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: SEBASTIJANOVIĆ SLAVKO
Date of defense: 05/25/95
Author: ŠESTIĆ ANTO
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: KLJAJIN MILAN
Date of defense: 12/21/94
Author: ĆOSIĆ TOMISLAV
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: KLJAJIN MILAN
Date of defense: 04/28/95
Author: LEVANIĆ MARIO
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: KLJAJIN MILAN
Date of defense: 06/27/95
Author: MALKOČ VLADIMIR
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: KLJAJIN MILAN
Date of defense: 07/17/95
Author: MOŠKUN DRAGOMIR
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: KLJAJIN MILAN
Date of defense: 07/17/95
Author: JUZBAŠIĆ GORDANA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: KLJAJIN MILAN
Date of defense: 07/18/95
Author: VUČINIĆ IVICA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: KLJAJIN MILAN
Date of defense: 07/18/95
Author: VIDOVIĆ ZORAN
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: KLJAJIN MILAN
Date of defense: 05/08/91
Author: KVOČKA GORAN
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: KLJAJIN MILAN
Date of defense: 04/15/91
Author: PAVLOVIĆ ILIJA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: KLJAJIN MILAN
Date of defense: 06/19/92
Author: MILINKOVIĆ DRAŽEN
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: KLJAJIN MILAN
Date of defense: 12/15/92
Author: MATEŠA MILAN
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: KLJAJIN MILAN
Date of defense: 03/24/93
Author: GRBA GORDANA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: KLJAJIN MILAN
Date of defense: 06/16/93
Author: MARCEKOVIĆ ANITA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: KLJAJIN MILAN
Date of defense: 06/16/93
Author: GRGIĆ DARKO
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: KLJAJIN MILAN
Date of defense: 11/04/93
Author: KOLESARIĆ GORAN
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: KLJAJIN MILAN
Date of defense: 07/05/94
Author: PUHARIĆ VLAD0
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: KLJAJIN MILAN
Date of defense: 01/12/95
Author: HAJNAL JASMINA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: KLJAJIN MILAN
Date of defense: 12/07/94
Author: GALIĆ FRANJO
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: KLJAJIN MILAN
Date of defense: 01/12/95
Author: JAMAKOVIĆ SAMIRA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: NOVOSEL MLADEN
Date of defense: 11/16/93
Author: SOLDO MIRELA
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: NOVOSEL MLADEN
Date of defense: 05/04/94
Author: PJANIĆ GOROSLAV
Degree level: D.A.
- Type of paper
: Mentorship
Title:
Faculty: STROJARSKI FAKULTET SLAVONSKI BROD SVEUČILIŠTE U OSIJEKU
Mentor: NOVOSEL MLADEN
Date of defense: 05/10/95
Author: SEKULIĆ MIRELA
Degree level: D.A.
- Type of paper
: Invited lecture
Title:
Institution: Hrvatska akademija znanosti i umjetnosti
Year: 1994
- Type of paper
: Invited lecture
Title:
Institution: Fakultet elektrotehnike, strojarstva i brodogradnje
Year: 1995
- Type of paper
: Invited lecture
Title:
Institution: The society for Experimental Mechanics
Year: 1995
- Type of paper
: Invited lecture
Title:
Institution: Fakultet elektrotehnike, strojarstva i brodogradnje
Year: 1995