Type of research: applied Duration from: 01/01/91. to 12/31/93. Papers on project (total): 17
Institution name: Tehnički fakultet, Rijeka (69) Department/Institute: DEPARTMENT FOR TECHNOLOGY AND ORGANISATION Address: Narodnog ustanka 58 City: 51000 - Rijeka, Croatia
Communication
Phone: 385 (0)51/32-844
Summary: Investigations carried out so far were performed on the
fractured surfaces of materials which worked in agressive evinronments.
Investigations of the fractured surfaces were performed on various
materijals, many of which were stainless steels and steels for the
fractured surfaces was different for the same category of materials and for
the same agressive environment. The phenomena of corrosion fatigue and
stress corrosion cracking were observed, which lead us to perform further
investigations. Researches were directed into the field of investigations
of stress corrosion cracking and corrosion fatigue (SCC/CF) of stainless
steels for biomaterials applications and materials for manufacture of off
shore technology equipment. The investigations of material aimed for off
shore technology are connected to the construction and operation problems
of large systems. An additional impulse presents the fact that the
International engineering associations attack an increasing importance to
the factors controlling SCC/CF in new plants aimed for energy production or
materials for new technologies. New SCC/CF phenomena always appear.
However, on of principal causes of failures can still be conteplated as a
results of casualities, therefore more care must be devoted to these
casualities, which can cause failures. The proposed investigations may also
have a practical character (nature) because with a better knowledge
(understanding) the danger of appereance of SCC/Cf during production, from
the initial phase up to the shut down may be diminished.
Research goals: On behalf of the proposed investigation project we
tried to determine corrosion fatigue and stress corrosion cracking more in
details, based on simple reason of steady occurrence of oxydation and
corosion corosion fatigue by solving the practical problems. In the last
time we have had also problems with stress corrosion cracking of methals.
It was our opinion that it is not enough only to inform the scientific
community in the usual way about the results obtained during these
investigations, but that there it is much more important to evaluete some
events in laboratory conditions. On behalf of the analysis of great number
of fractured surfaces obtained from the praxis, it could be concluded about
the causes of failures. We tried to obtain the fractured surfaces in
laboratory conditions. On behalf of these results a systematisation of the
fractured surfaces being a results of action of stres and aggressive
environment could be performed. Such an evaluation would present an
systematisation of fractures from the initial crack formation up to the
final fracture.
COOPERATION - PROJECTS
Name of project
: 2-08-378 UTJECAJ OKOLINE NA KOROZIJU METALA Name of institution: Tehnički fakultet Rijeka City: 51000 - Rijeka, Croatia
COOPERATION - INSTITUTIONS
Name of institution
: Institut za elektroniko in vakumsko tehniko Type of institution: University/Faculty City: 61000 - Ljubljana, Slovenija Other information about the project.